Latest metal wire Tenders | Government metal wire Tenders

State Government

CTN :40059761

07 May, 2025 1.30 Crore

Mahisagar - Gujarat

Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka kadana under taluka panchayat, kadana under mgnrega (annual unit rate)-, 53 grade isi opc cement, , crushed stone aggregate for hard quality 10 mm to 20 mm size, , crushed stone aggregate for hard quality 40 mm to 63 mm size, , screened gravel 10 mm size, , screened gravel 12 mm size, , unscreened gravel, , coarse sand, , fine sand, , rubble, , murrum/ binding material, , t.m.t. bars fe-415, , stone dust, , white cement, , distemper primer, , bricks aggregate 40 mm size, , hysd bar, , hand broken stone aggregate 40 mm size to 63 mm size, , binding wires, , bitumen washer, , g.i. j or l hooks., , g. i. plain washer, , enamel paint, , enamel primer, , door shutters decorative type 35 mm thick both sides teak finished., , marble slab polished granite stone 20 to 25mm thick blacs, , flat back wash basin white vitrious china 450mm x 300 mm size, , urinal stall type half size, , r.c.c. heavy duty non-pressure pipe l.s.class np2-900 mm dia., , r.c.c. heavy duty non-pressure pipe 1.s.class np2-600 mm dia., , pvc water tank, , upvc sch 40 for cold water 15 mm dia. (1/2"), , upvc sch 40 for cold water 25 mm dia. (1"), , upvc sch 40 for cold water 40mm dia (1.1/2"), , p.v.c. pipes 10 kgf/sq.cm 110 mm dia., , p.v.c. pipes 10kgf/sq.cm 50 mm dia, , 5 waste pipe for wash basin c.p. 32mm dia., , 7 structual steel m.s. channel, joints, tee, gusset plate ete., , vitrified granite tiles 8 mm to 10 mm thick 24" x 24" size dark shade, , 9 white vitrious china w.c. sqatting pan (indian type), , -0 white vitrious china 'p' or 's' trap, , 11, , white vitrious ching wash down w.c. (european), , 42 m.s angel, , 43 vitrified granite tiles 8 mm to 10 mm thick 24" x24" size light shade, , 44, , m.s. sheet 1 mm thick, , 45, , pillar tap 15 mm dia., , 46, , polished kota stone slab green 25mm thick, , 47, , paver block m200 grade 60 mm thick, , 48, , common burnt clay bricks conventional size, , 49, , g. i. sheet 0.8 mm thick corrugated class-3, , 50, , galvanised mild steel tube medium grade 40 mm dia., , 51, , hire charges for road roller, , 52, , white lime (white washing), , 53, , r.c.c. heavy duty non-pressure pipe i.s.class np3-600 mm dia., , 54, , gun metal screw down bib tape 15 mm dia, , 55, , crushed stone aggregate 40mm size, , 56, , white glazed tiles 15 cm x 15 cm x 6 mm, , 57 ci or ms brackets, , 58, , brass screw down bib tape 15 mm dia, , 59, , white vitreous china sink 600mm x 450 mm x 150 mm, , 60, , brass screw down stop cock 25 mm dia, , 61, , ci cover with frame 455 mm x 610 mm, , 62, , water profing cement paint, , 63, , cement concret mixer, , 64, , drilling of 215 mm dia. bore in over burden strata including lowering and fixing of 175 mm, , , nominal dia upvc pipe up to required depth and further drilling of 165 mm dia bore hole in rocky strata by d111 ng, , manufacture, supply and delivery of isi marked upvc casing pipe (18-12818 )175 mm nominal dia "cs" type, , providing and supplying single phase borwell submersible pump motor set with control panel of 20 lpm, 110 mt head and 1.5 hp., , pvc insulated flat submersible cable as per detailed technical specifications of r/c of gwssb conforming to is 694, iec 60227 60228. 1 r x 30 x 4.0 mm, , manufacture, supply and delivery of following isi marked (is: 4984/1985 with latest amendment) having material grade pe-80 in requirement at site with ss-316 nipple at both end having 11 t?? threading dn-40, pn-10., , lowering of single phase submersible pump set complete with required length of hdpe pipe & cable in bore well and fitting up to 90mt depth, , electrification, , nails 50 mm long, , centering and shuttering, , water tanker 6 kl capicity,

CTN :40065593

01 May, 2025 NA

Dibrugarh - Assam

Tender For supply of cable tray - 300 mm wide straight run cable tray , 750 mm wide straight run cable tray , reducers 750 300 rhs , horizontal bends for 300 mm wide tray with 1000 mm bending radius , horizontal bends for 750 mm wide tray with 1000 mm bending radius , vertical outside bends for 300 mm wide tray 1000 mm bending radius , vertical outside bends for 750 mm wide tray 1000 mm bending radius , vertical inside bends for 300 mm wide tray 1000 mm bending radius , vertical inside bends for 750 mm wide tray 1000 mm bending radius , tee joints for 750 mm wide tray with 100 mm bending radius , 0.91 mm gi sheet covers for cable trays , galvanized slotted channel trays of 2 mm thickness and 50 mm high of 100 mm wide. , galvanized slotted channel trays of 2 mm thickness and 50 mm high of 150 mm wide. , galvanized slotted channel trays of 2 mm thickness and 50 mm high of 60 mm wide.

CTN :40031325

05 May, 2025 50.00 Lacs

Surat - Gujarat

Tender For tenders for work of work supply, laying, testing and commissioning of 11kv /22 kv ug cable (xlpe cable will be supplied by dgvcl) with cable termination and straight through joints kits (to be supplied by contractor) for laying underground cable in all schemes at sachin-02 ind sub division under surat ind divn.

corporations/Associations/Others

CTN :40025623

29 Apr, 2025 NA

Bankura - West Bengal

Tender For supply of different type and size of gasket for tams u1to6 mtps - jointing sheet non asbestos non metallic working pressure 50 kg per cm , jointing sheet non asbestos non metallicchampion style af120 , jointing sheet non asbestos non metallic working pressure 200 kg per cm , jointing sheet non asbestos metallic reinforced with metallic wire mesh working pressure 200 kg per cm , jointing sheet non asbestos metallic reinforced with metallic wire mesh working pressure bid number/ & ( * ) : gem/2025/b/6094029 dated/ + : 15-04-2025 bid document/ 3 3 1 / 15

State Government

CTN :40043641

30 Apr, 2025 1.20 Crore

Sukma - Chhattisgarh

Tender For construction, testing and commissioning of r.c.c. elevated service reservoir of 40kl capacities & staging 12. mt. including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber (02 nos)&providing, laying, jointing, interconnection, testing and commissioning of mm dia to 63 & 75 mm hdpe pe-100 , pn-6 pipe 90mm dia upvc class 6/10 kg/sqcm with suitable joints & 80 mm dia gi pipe, valve specials and all fittings including all allied civil works, supplying & installation of energy efficiant five star bee rating isi marked required capacity single & three phase, 50 hz, 220v, deep well submersible pump stainless steel body, suitable for 4"/6" tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications butexcludingpipe, ss /nylonwireropeandconnection cable including verification & electric connection from cseb, construction of brick masonry switch room of size 1.2*1.2*2.1 mtr, installation of 01 no. electro chlorinator , construction of chlorinator room of size 2.4*2.4*3.0 mtr , providing functional household tap connection(f.h.t.c) in individual households and government instiution etc. complete with trial run operation & maintanance for 03 months under single village of piped water supply scheme under jal jeevan mission for village- gumma ,(gp.) gumma block- chhindgarh, district sukma at risk and cost ( old sor)

corporations/Associations/Others

CTN :40031301

06 May, 2025 12.10 Lacs

Himatnagar - Gujarat

Tender For bi-arc for providing & fixing of heat shrink cable jointing kit indoor, outdoor & straight joints suitable for 11kv 3x95 sq.mm. to 3x300 sq.mm. xlpe cable for various substations under himatnagar tr circle as and when require

State Government

CTN :39996366

06 May, 2025 3.45 Crore

Kanchrapara - West Bengal

Tender For supply, storage, installation, commissioning and trial run of electro-mechanical equipment at raw water and clear water pumping station under kanchrapara municipality. - for rwps, supply, delivery , storage, installation, testing & commissioning of vertical turbine type centrifugal pump with cashion pipe ,column assembly, discharge head, sole plate, motor stool and all other accessories all complete of 750m /hr discharge at a head of 29 mtr at duty point as per technical specification . maximum allowable speed of pump shall be 1000 rpm., supply, delivery , storage, installation, testing & commissioning of vertical, scim ,tfec, 110 kw (minimum), 415 v 10% , 50hz 05%, speed 1000 rpm (syn) , to vertical pump duty motor to match with pump at sl no- (1) complete with coupling hub and all other accessories as per specification., supply, delivery , storage and installation at site of ms pipes, specials, joints, flanges as per specification and technical offer. (for both individual pump delivery pipe and extended part of common manifold if required) ., supply, delivery and installation and commissioning of valves complete at site with fixture as per specification and technical offer & as follows :-, di butterfly valve for delivery side of pump fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line. (350 mm minimum))(pn 16 type), di non-return valve for individual pump delivery pipe line. (350 mm. minimum))(pn 16 type), supply, delivery at site and storage of m.s. dismantling joint assembly for the individual pump delivery pipe line as per specification (350 mm minimum)., supply, delivery ,storage and installation at site of pressure gauges complete with fittings and fixture as per specification, pressure gauge for delivery side (0 10 kg / cm2), supply, delivery ,storage and installation at site of pressure transmitter complete with fitting and fixture as per specification as follows:-, pressure transmitter for delivery side ( 0 10 kg / cm2 ), supply, delivery at site and installation of m.s. structural materials for cable tray / rack, panel installation supports, pipes & valves supports, fabricated stairs & all other fabrication work., lt panel, modification / retrofitting/expansion/addition of the existing pmcc with supply , delivery & installation of a new additional motor starter feeder at rwph in order to accomodate the extra pump-motor feeder of requisite rating not less than 110 kw .the modification/addition should match/synchonise the existing panel and should ensure smooth operation of the complete panel as a single entity and should be fit to install at the existing pump house., retrofitting of existing control desk at site with supply,wiring, installation of additional items like temparature scanner , multifunction meter , microprocessor based position indicator, digital pressure indicator,tnc switch, push button switch, indication lamps etc .as required to complete for the new pump motor set., supply ,delivery, laying, installation of power cable of adequate size from motor feeder to motor .(min. 2 run x 3core , 185 sq mm xlpe armoured al. for each feeder), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to motor space heater . (min. 3 core 2.5sq mm. armoured cu for each motor), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to valve actuator etc. elsewhere required. (min . 4 core 2.5 sq mm. armoured cu), making end termination of all the power cables as stated in sl no 11,12,13 with all necessary equipments like termination kits(dry type), lugs , glands etc , installed for the modification job., supply ,delivery, laying, installation of control cables of different size as required for the purpose and length for completing the different control connections between control desk, motor feeders , lpbs, pmcc etc.to the satisfaction o

CTN :39978574

25 Apr, 2025 20.78 Lacs

Pahalgam - Jammu And Kashmir

Tender For supply of spares/miscellanious items for gis pahalgam for providing reliable power supply during sanjay 2025. - split inverter ac 1.5 ton 5 star hot and cold with avr and other accessories of standard make (for gis pahalgam), servo voltage stabilizer three phase oil cooled p-p 190-450 v : p-n:110-260 v ( with t-oil) , 15 kva (100 ltr. oil capacity), 36v 100ah float cum boast battery charger with full wave rectification for 220v single phase, 50hz ac input supply for (gis pahalgam), 33 kv single core indoor cable kit ( plug in tremination type and screened seperable connectors ) for 400 mmsq cable for gis compatible substaion (brand:- euromold, nexans, raychem etc), 33 kv single core outdoor type cable kit for 400 mmsq, 11 kv single core indoor cable kit ( plug in tremination type and screened seperable connectors ) for 630 mmsq cable for gis compatible substaion (brand:- euromold, nexans, raychem etc)for gis substaion panel mounted, 11 kv three core indoor cable kit ( plug in tremination type and screened seperable connectors ) for 400 mmsq cable for gis compatible substaion (brand:- euromold, nexans, raychem etc)for gis substaion panel mounted, 33 kv current transformer outgoing (33 kv, 1 , multi ratio multi core 600-300/1a, indoor type) (1 no. per ) for gis compatible 33/11kv station panel mounted, 33 kv current transformer incommer (33 kv, 1 , multi ratio multi core 900-600/1a, indoor) (1 no. per ) for gis compatible 33/11kv station panel mounted, 11 kv current transformer outgoing (11 kv, 1 , multi ratio multi core 200-400/1a, indoor) (1 no. per ) for gis compatible 33/11kv station panel mounted, 11 kv current transformer incommer (11 kv, 1 , multi ratio multi core 900-600/1a, indoor) (1 no. per ) for gis compatible 33/11kv station, 11 kv current transformer (11 kv, 1 , multi ratio multi core 600-300/5a, indoor) (1 no. per ) compatible to hartek panels at ais pahalgam, 33 kv current transformer for auxillary (33 kv, 1 , 30/1a, indoor) (1 no. per ) for gis compatible 33/11kv station panel mounted, potential transfromer 33kv/110v (1 , multi core indoor) (1 no. per ) for gis compatible station panel mounted, potential transfromer 11kv/110v (1 , multi core indoor) (1 no. per ) for gis compatible station panel mounted, over current/earth fault (3 o/c and 2 e/f relay abb type for gis compatible 33/11kv substation, providing and fixing 3 layer pp-r (poly propylene random copolymer) pipes conforming to is: 15801, uv stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all pp-r plain and brass threaded polypropylene random fittings. this includes testing of joints complete as per direction of engineer-in?charge. internal work-exposed on wall with clamps at 1.00 meter spacing pn-16 pipe , 25mm od(sdr-7.4) for replacement of damaged pipiline. (for ais and gis )

CTN :39970406

28 Apr, 2025 50.00 Lacs

Surat - Gujarat

Tender For tenders for work of erection of overhead 11/22kv ht line/lt line with bare conductor areal bunch conductor transformer centers & service connection in all scheme and work supply, laying, testing and commissioning of 11kv /22 kv ug cable (xlpe cable will be supplied by dgvcl) with cable termination and straight through joints kits (to be supplied by contractor) for laying underground cable in all schemes at pramukh park ind sub division under surat ind division.

CTN :39970439

28 Apr, 2025 50.00 Lacs

Surat - Gujarat

Tender For work supply, laying, testing and commissioning of 11kv /22 kv ug cable (xlpe cable will be supplied by dgvcl) with cable termination and straight through joints kits (to be supplied by contractor) for laying underground cable in all schemes at sachin-01 ind sub division under surat ind divn.

Metal Wire Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

corporations/Associations/Others

State Government