Latest meter panel scrap Tenders | Government meter panel scrap Tenders

State Government

CTN :39984717

18 Apr, 2025 NA

Calcutta - West Bengal

Tender For supply of following items for setting up measurement and instrumentation lab for 4 year b.tech in electrical engineering curriculum and application for university of calcutta. - experimental set-up for calibration of a wattmeter using dc potentiometer with following features/items:regulated power supply 2 volts, 100 ma to operate the potentiometer.calibrated electronic standard cell voltage 1.0186 volts.regulated power supply 0-5 volts/0.5 amps with milliammeter 0- 500ma for current coil of wattmeter.regulated high voltage power supply 0-250 dc volts with voltmeter 0-250 volts for pressure coil of wattmeter.a panel mounting wattmeter 0-125 watt is required to perform the experimentgalvanometer for null balance.a volt ratio box for measurement of higher voltage.complete circuit diagram with wattmeter connections to be provided on the front panel of the instrument.with standard accessories, experimental set-up for low resistance measurement using kelvin s double bridge with following features:range: 0.2 micro ohm to 11 ohms, with an accuracy of 0.05 %required accessories:spot reflecting galvanometer. dc source 10 a with one analog current meter. attachment of 1 meter length.brass clamp with terminals for zero setting. with standard accessories, experimental set up for unknown capacitance measurement using de-sauty s bridge with following specifications:source: sine wave signal of 1khz. the amplitude of ac switch indicating lamp is provided on the bakelite board. two sockets are to be provided for the output of ac signals.detector: for detecting small ac signals in the output, null detector is required as in-built with digital display.circuit diagram:the circuit layout on the board is to be provided out to facilitate convenient working. 4 or 5 mm socket required for making connection. features:r2 --- three decade resistance dials having value 10 1000, 10 100 and 10 10 ohmsr1 ---- single decade resistance dial having value 10 100 ohmsc1 ---- unknown capacitor.c2 ---- two fixed standard capacitors having value 0.01mfd 0.1mfd (loss free)with standard accessories, experimental set-up for calibration of a 1-phase watt-hour meter with following scopes: to adjust & calibrate a single-phase energy meter by direct loading method to adjust & calibrate a single-phase energy meter by comparing with a sub-standard meterspecifications: static energy meter single phase: under test (local) duly mounted, wired and terminated static energy meter single phase: sub-standard meter (isi mark) duly mounted, wired and terminated voltmeter: moving iron ac portable of class 1.0 accuracy and range 0 - 300 v ac ammeter: moving iron ac portable of class 1.0 accuracy and range 0 - 10 a ac wattmeter: dynamometer type ac single phase, multi-range with current coil 5 / 10 amp and potential coil 75 / 150 / 300 v ac variac: variable voltage transformer (portable table / floor mounting type with enclosure) input: 230v ac and output: 0 270v / 8 amp ac variable load: made up of 3 load resistors of 70 ohms / 700 w each duly mounted and connected / terminated to form different loads (35 to 210 ohms) as per external connections digital stop clock: portable with start / stop & reset operation set of necessary 4 mm spring loaded patch cords for interconnections detailed instruction manual supply to be connected: 230v, 1phase, 50 hz, ac mains, experimental set-up for calibration of a 3-phase watt hour meter with following specifications: to adjust & calibrate a three-phase energy meter by direct loading method to adjust & calibrate a three-phase energy meter by comparing with a sub-standard meterspecifications:static energy meter three phase: under test (local) duly mounted, wired and terminatedstatic energy meter three phase: sub-standard meter (isi mark) duly mounted, wired and terminatedvoltmeter: moving iron ac portable of class 1.0 accuracy and range 0 - 300 v acammeter: moving iron ac portable of class 1.0 accuracy and range 0 - 10 a acwattmeter:

Central Government And Public Sector

CTN :39144860

22 Apr, 2025 NA

Chittorgarh - Rajasthan

Tender For corrigendum : tender for supply of resistance temperature transmitter and indicator - resistance temperature transmitter ( resistance to current converter) , make -elektra precision .input- rtd pt-200. temperature range 0-100 degree centigrade , output- 04 to 20 ma dc (two no of output) zero & span adjustable. power supply- 118 vac with connector. other detail as annexure-1.(bidder should comply one to one in specification as attached) , spare elektra ( earlier lektrolab ) make resistance temperature transmitter. input rtd pt.200. temp range- 230 - 320 degree centigrade. o/p- 04 to 20 ma dc. single output. other common details as per attached annexure-1. , spare elektra ( earlier lektrolab ) make resistance temperature transmitter. input rtd-pt.200. temp range- 0-320 degree centigrade. output- 04 to 20 ma dc with double isolated outputs. other common details as per attached annexure-1. , resistance temperature transmitter ( resistance to current converter) , make-elektra precision .input- rtd pt-100. temperature range 0-100 degree centigrade , output- 04 to 20 ma dc (two no of output) zero & span adjustable. power supply- 118 vac with connector. other detail as annexure-2.(bidder should comply one to one in specification as attached) , indicating alarm meter , make - m/s elektra precision systems , tag-flow indicating alarm meter , range-0-400 ft/sec , alarm -high , alarm relay-one for high alarm , input -4-20ma , mounting arrangement-4b , normal operating 118 v ac , 50 hz +/-10 percent , indicating alarm meter , make - m/s elektra precision systems , tag-temperature indicating alarm meter , range-0-100 degree c , alarm -high , alarm relay-one for high alarm , input -4-20ma , mounting arrangement-1a , normal operating 118 v ac , 50 hz +/-10 percent , indicating alarm meter , make - m/s elektra precision systems , tag- differential pressure indicating alarm , range- -15 to +25 gm/cm2 , alarm -high , alarm relay-one for high alarm , input -4-20ma , mounting arrangement-1a , normal operating 118 v ac , 50 hz +/-10 percent , indicating alarm meter , make - m/s elektra precision systems , tag- flow indicating alarm , range- 0-700 (squre root scale flow) lpm , alarm -low , alarm relay-one for low alarm , input -10-50ma , mounting arrangement-4b , normal operating 118 v ac , 50 hz +/-10 percent , indicating alarm meter , make - m/s elektra precision systems , tag- temperature indicating alarm , range- 0 to 70 degree c , alarm -low/high , alarm relay-one for high alarm and one for low alarm , input -4-20ma , mounting arrangement-4b , normal operating 118 v ac , 50 hz +/-10 percent , indicating alarm meter , make - m/s elektra precision systems , tag- flow indicating meter , range- 0-6 (squre root scale) klpm , alarm -no alarm , alarm relay-no alarm , input -10-50 ma , mounting arrangement-4b , normal operating 118 v ac , 50 hz +/-10 percent , indicating alarm meter , make - m/s elektra precision systems , tag- level indicating meter , range- 0-10 meter , alarm -no alarm , alarm relay-no alarm , input -4-20 ma , mounting arrangement-4b , normal operating 118 v ac , 50 hz +/-10 percent , indicating alarm meter , make - m/s elektra precision systems , tag- flow indicating meter , range- 0-10.7 meter / sec & 0-30 feet /sec , alarm -high , alarm relay-one for high alarm , input -4-20 ma , mounting arrangement-4b , normal operating 118 v ac , 50 hz +/-10 percent , indicating alarm meter , make - m/s elektra precision systems , tag- flow indicating meter , range- 0-10.7 meter / sec & 0-30 feet /sec , alarm -high , alarm relay-one for high alarm , input -0-4 ma , mounting arrangement-4b , normal operating 118 v ac , 50 hz +/-10 percent , indicating alarm meter , make - m/s elektra precision systems , tag- pressure indicating alarm meter , range- 0-0.7 kg/cm2 , alarm -high/low , alarm relay-one for high alarm & one for low alarm , input -4-20 ma , mounting arrangement-4b , normal operating 118 v ac , 50 hz +/-10 percent , i

CTN :40036122

15 May, 2025 NA

Multi City - Multi State

Tender For high resistance meter for insulation resistance measurement of first fire elements and pyro devices

CTN :39342632

25 Apr, 2025 4.67 Crore

Amravati - Maharashtra

Tender For corrigendum : selection of system integrator for supply, establishment, operation and maintenance of center of excellence on digitalization through simulation at government college of engineering ,amravati - hardware part, battery charge and discharge test system, data acquisition and logging system, thermocouple/ rtd for temperature measurement, battery tester for internal resistance testing, electric vehicle bldc motor training system, bldc (brushless) inner rotor brushless dc motor coupled with dc shunt motor to study the load characteristics and study of drive parameters, battery characteristics training system, pmdc motor training system, power and transmission system study models for ev application, pmsm motor coupled with dc generator test bench setup, switched reluctance motor coupled with eddy current dynamometer test bench setup, pwm charge controller training system:, sectioned electric vehicle two-wheeler chassis, sectioned electric vehicle four-wheeler chassis, battery resistance spot welding machine, dc /ac clamp meter, non-contact type tacho meter, computing workstations for ev design and simulation, multi-body dynamics analysis research software bundle for ev (10 user), power train/ gearbox design research software package, 1d+3d thermal modelling, bms modelling, electric motor, ic engine modelling research software package, multi-physics cae research software package with battery modelling and analysis capabilities, nmc cell ( size 18650), nmc cell ( size 26650), lfp cell, smart bms training system, electric vehicle scanner, diy kits for 20 students, advanced driver assisting system (adas) training system for e-mobility, ac ev charger 10kw, dc fast charger: 20kw, multifunction installation tester, electric vehicle service equipment test adapter kit, battery tester with inbuilt printer, digital infrared thermometer, digital multifunction meter with vfd, ef-detection & 3-phase rotation, vde approved insulated tool set for ev, electric vehicle safety equipment, ev battery assembly & testing centre setup, ev battery pack cell equalizer, regenerative charging and braking training system, ev assembly disassembly kit, three phase power clamp-on meter with harmonics measurement, digital insulation multi function meter, phase sequence indicator, battery quality anaylyzer with data logger, laptop, hybrid display module, hybrid trainer module motorized, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, computing workstations / pc, engineering simulation software multi-physics cae research software (includes pre-processor and post processor) 10 users, 3d cad package ( 60 user), laptops, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, video conferencing set-up, electromagnetic (em) simulation with circuit design, rf circuits and system design (5g) academic research software :, integrated circuit (ic) design & verification academic research software :, soc development board with software, emc/emi test equipment, spectro radiometer for measurement of the luminous flux, spectrum, color, and color rendering indices of single leds (hand held device), high end computers, 3d printer for prototyping, laptop, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, revolving chair with arm centre pivot mechanism, computer table, white board with stand, revolving office chair with arm centre pivot mechanism for faculty, laboratory wooden table, office table for faculty, major almirah with glass type doors, seminar chairs with desklet, executive office table, executive office chair, sofa set (3+2+1 seater), teapoy/coffee table, visitors chairs with cushion, major almirah, multi function/ all in one printer for office and lab, necessary electrification and networking, matting area with labour work (in sq ft), false ceiling (in sq ft), window sliding door, window curtains with fitting, gypsum plaster with wall putty, wall colori

CTN :39852452

25 Apr, 2025 NA

Chhindwara - Madhya Pradesh

Tender For corrigendum : tender for supplying of electric and electronic items at cims chhindwara - details of electrical/electronic item, led bulb 09 watt, led bulb 15 watt, led batten 20 watt (tubelight), l.e.d. parking dome light 20 watt, p.o.p. false ceiling round panel led light shape 12-watt, square led panel ceiling led light for false ceiling 30-watt, parking lot light 200 watt, l.e.d. 150 watt flood light, l.e.d. 200 watt flood light, ceiling fan high speed blade size 1200 mm, ceiling fan high speed blade size 1500 mm, ceiling fan high speed blade size 1800 mm, exhaust fan size 150 mm, exhaust fan size 200 mm, exhaust fan size 300 mm, exhaust fan size 450 mm, wall fan high speed - size 300 mm, wall fan high speed - size 400 mm, induction cooktop 1200 watt, induction cooktop 1800 watt, electric room heater with heating rod 2000 watt dual heating mode type, electric geyser 10 litre capacity, electric geyser 15 litre capacity, dessert cooler 60 litre capacity, dessert cooler 75 litre capacity, dessert cooler 90 litre capacity, isi marked ding dong/musical chime electric bell suitable for 230 volt and all required accessories as required, long range wireless heavy duty remote bell, calling bell for office use, fan regulator modular type, 2.5 mfd epcos ceiling fan capacitor, 3 pin top 6 amp, 3 pin top 16 amp, modular switch 6 amp modular type, modular switch 16 amp modular type, extension board with 4 standard socket, switch and 5 meter cable, 12 modular switch board included 4 switch (6a) & 1 switch (16a), 1 socket (6a 1) & 1 socket (16a) and 1 fan regulator, sockets 6 amp modular type, sockets 16 amp modular type, 4 inch long line tester upto 500v range, 2.5 kv 200 terra ohm insulation resistance tester megger, digital earth resistance tester 1 ohm - 2000 ohm & e.v., crimping tool 16-300 mm 11 ton crimping pressure, angle grinder 11000 rpm, electric rotary hammer with heavy duty cord, heavy duty combinational rachet socket spanner wrench spanner set 11 mm to 32 mm , multi functional wire stripper tool, angle holder, ceiling rose, 4 modular plate, 6 modular plate, 8 modular plate, 12 modular plate, emergency light 12 volt rechargable, torch 2 watt flashlight, long range led torch rechargable emergency light, electric repair tool kit standard, tape roll electric insulation standard, isolator mcb 64 amp, isolator mcb 40 amp, isolator mcb 32 amp, isolator mcb 16 amp single, mccb 100 amp, mccb 125 amp, mccb 150 amp, mccb 200 amp, mccb 300 amp, mccb 400 amp, mccb 500 amp, mcb 6 amp, mcb 10 amp, mcb 16 amp, mcb 20 amp, 2-pole mcb 32 amp, 4-pole mcb 32 amp, mcb 64 amp, 2.5 sq mm electric wire (90 mtr of each roll), 1.5 sq mm electric wire (90 mtr of each roll), 1 sq mm electric wire (90 mtr of each roll), 0.75 sq mm electric wire (90 mtr of each roll), 0.5 sq mm electric wire (90 mtr of each roll), 3.5 sq mm electric wire (90 mtr of each roll), 4 sq mm electric wire (90 mtr of each roll), 6 sq mm electric wire (90 mtr of each roll), aluminium cable lugs 16 mm pack of 50 nos, aluminium cable lugs 25 mm pack of 50 nos, aluminium cable lugs 35 mm pack of 50 nos, aluminium cable lugs 50 mm pack of 50 nos, aluminium cable lugs 70 mm pack of 50 nos, aluminium cable lugs 95 mm pack of 50 nos, aluminium cable lugs 120 mm pack of 50 nos, aluminium cable lugs 150 mm pack of 50 nos, aluminium cable lugs 185 mm pack of 50 nos, aluminium cable lugs 240 mm pack of 50 nos, aluminium cable lugs 300 mm pack of 30 nos, copper wire lugs 1 mm pack of 100 nos, copper wire lugs 1.5 mm pack of 100 nos, copper wire lugs 2.5 mm pack of 100 nos, copper wire lugs 3 mm pack of 100 nos, copper wire lugs 4 mm pack of 100 nos, copper wire lugs 6 mm pack of 100 nos, copper wire lugs 8 mm pack of 100 nos, copper wire lugs 10 mm pack of 100 nos, copper wire lugs 16 mm pack of 100 nos, copper cable 3 core per feet, generator bettery 160 ah 12 volt, generator bettery 200 ah 12 volt, battery 150 ah 12 volt, battery for lift 7 ah 12 volt, battery for lift 12 ah 12

CTN :39651978

17 Apr, 2025 NA

Darrang - Assam

Tender For corrigendum : supply of aft017 equipment for food microbiology lab - electronic analytical balance , electronic colony counter , hot air oven , microscopes optical and digital compound , bod incubator , uv vis spectrophotometer , microbial bench scale autoclavable fermenter mini bioreactor , deep freezer minus 20 degree celsius and minus 80 degree celsius , autoclave , microprocessor controlled laboratory centrifuge , biosafety cabinet , water bath , hot plate , refrigerator , incubator , shaker incubator , vortex mixer or shaker , laminar air flow or laminar hood , ph meter , automatic double water distillation system , workbench vibration sensitive , workbenche stainless steel , workbenche chemical resistance , workstation spectrophotometer , instrument storage racks , glass slides pack of 100 pieces , cover slips pack of 50 pieces , immersion oil microscopy grade dropping bottle , hepa high efficiency particle arresting filter , gloves , general consumables media microbiology culture himedia etc , general consumables agar powder , general consumables reagents powder or liquid

State Government

CTN :39882595

17 Apr, 2025 867

Bengaluru - Karnataka

Tender For supply, installation and maintenance of science lab equipment to government first grade colleges under pmusha - lcr meter, ic 555 kit, specific heat of metals, photo cell experiment kit, pbeers law setup, pvoltmeter (ac) analog 0-260v, digital voltmeter 0-2v and 0-20v, ac ammeter analog, digital microammeter, milli ammeter, specific heat by electrical method, the ionization potential of mercury, patwoods machine, full wave and half wave rectifier kit, air wedge, resolving power of telescope, ballistic galvanometer with lamp and scale arrangement, pyoungs modulus by uniform bending, spring constant setup, surface tension by drop weight, pkoenigs method, psearles method, bar pendulum set, thermistor kit, pdecade resistance, decade inductance, zener diode kit, fractional resistance box, thermal conductivity apparatus, digital thermometer with probe, decade capacitance, pandersons bridge kit, pstefans law verification kit, pmicro ammeter analog, pstokes method apparatus, static torsion apparatus set , newtons ring setup, photo diode iv characteristic kit, helmholtz galvanometer, ionisation potential of xenon kit, i-v characteristic of tunnel diode kit, solar cell spectral characteristic with colour filters, planks constant by photo cell with optical filters, flywheel, plee and charltons disc method apparatus set, transistor characteristis cc ad cb, psonometer electromagnet ac step down transformer and slotted weight 500gm x 5, lcr series parallel resonance kit, fet characteristics kit, battery eliminator 2-12v/2a, abbe refractometer, hydrogen spectra apparatus, frank hertz experiment apparatus, constant deviation spectrometer, electronic spin resonance spectrometer, dielectric constant of solids and liquids, study of lattice dynamics kit, pvan der pauvs method, energy gap of semiconductor kit, plancks constant led kit, ppolarimeter, opamp power supply, stop clock, ptravelling microscope, spectrometer lc 0.5 min, multimeter, meldes experiment set, zeeman effect, ultrasonic interferometer, thomsons method, single power supply 0-30v, pquincks tube, op amp kit, millikans oil drop experiment, michelson interferometer, kbr press/pellet maker (automatic), kbr die, ic trainer kit, he-ne laser, hall effect, pgouys method, gm counter, pfunction generator, four probe setup, fiber optic kit with optical bench, dual power supply 0-30v, digital storage oscilloscope, bh curve set, gamma ray spectrometer, scintillation detector, lcr meter high end, interactive digital source meter, photo catalytic reactor, trinocular microscope with camera, refrigerator double door, incubator, bod incubator, dissection kits, water dispenser(hot & cold water), pdistillation unit, colony counter, cooling centrifuge, flask shaker, dna electrophoresis unit, autoclave vertical 22l, microtome, ultraviolet chamber, water bath, electric burner, electric hot plate, pheating mantle, pmagnetic stirrer, vacuum pump, spin coating unit, vibration mill, spectrophotometer, pph meter, muffle furnace, pmelting point apparatus, laminar air flow cabinet, ice maker machine, photplate with magnetic stirrer, hot air oven, potentiometer with calomel and platinum electrode, flame photometer, dissecting microscope, analytical balance, pdigital balance, pconductivity meter, pcolorimeter, pcompound microscope, centrifuge, pbinocular microscope, lcr meter, ic 555 kit, specific heat of metals, photo cell experiment kit, pbeers law setup, pvoltmeter (ac) analog 0-260v, digital voltmeter 0-2v and 0-20v, ac ammeter analog, digital microammeter, milli ammeter, specific heat by electrical method, the ionization potential of mercury, patwoods machine, full wave and half wave rectifier kit, air wedge, resolving power of telescope, ballistic galvanometer with lamp and scale arrangement, pyoungs modulus by uniform bending, spring constant setup, surface tension by drop weight, pkoenigs method, psearles method, bar pendulum set, thermistor kit, pdecade resistance, decade inductance, zener diode kit

CTN :39901115

23 Apr, 2025 2.00 Crore

Delhi - Delhi

Tender For procurement of equipment, instruments, machinery, tools etc. related to laboratories and workshops of electronics & telecommunication engg., engineering physics, engineering mechanics of mirik government polytechnic, mirik, dist - "spherometer , (screw pitch 0.05 mm and lc 0.005 mm)", "concave mirror , (focal length 20 cm)", "convex mirror, (focal length 20 cm)", "concave surface , (focal length 20 cm diameter 50 mm)", "hook's law apparatus , (consisting of 30 cm long mirror scale,, spring, slotted weights with hanger and, pointer, complete on heavy tripod stand)", "mercury , (distilled liquid mercury, grade std.-biotech grade)", "flywheel apparatus , (thickness: 4.4 cm diameter :20 cm)", cantilever (length 100 cm, hook at one end, c clamp), light weight hanger (metal slotted weight mechanics physics experiment equipment set with hook with weight of each mass of the order of 50gm or 100 gm), "inverse square law apparatus (optical bench, photocell housed with, red and black sockets, lamp house with lamps, dc microammeter)", stopwatch (digital stopwatch with ms count), high resistance box (resistance box plug with 1 to 10 k ohm resistance), "winch crab single purchase with weight, [experiment set up winch crab single purchase- fitted with heavy cast iron wall brackets the grooved wheel is of 25 cm diameter and gears are machine cut. string, weight box with pan. ]", "winch crab double purchase without weight, [experiment set up winch crab single purchase- fitted with heavy cast iron wall brackets the grooved wheel is of 25 cm diameter and gears are machine cut. ]", "worm and worm wheel single without weight , [experiment set up consisting of machine cut worm gear of 25 cm diameter, carrying a metal drum on 12 cm diameter, and machine cut worm on steel spindle carrying a 12 cm, complete with effort pulley, string with pan.]", "worm and worm wheel double without weight , [experiment set up consisting of machine cut worm gear of 25 cm diameter, carrying a metal drum on 12 cm diameter, and machine cut worm on steel spindle carrying a 12 cm, complete with effort pulley, string with pan.]", "wheel & axle simple without weight, [standard setup for lab.]", "simple screw jack with weight, [experiment set up screw jack ( weights)all metallic construction accurately machine cut screw with a pitch of 5 mm carrying a double fanged turn table of about 20 cm diameter. fitted on a heavy cast iron base and complete with two adjustable pulleys, cord and hook. weights are included.]", ", combined inclined plane & friction slide apparatus iron base & with weight, [standard setup for lab.]", "parallel forces apparatus, [experiment set up simple supported best type supported at its end. for verification of condition of equilibrium of parallel forces, law of lever & forces on beam etc. consisting of two compression thrust type 10 kg tubular spring balances fixed on wooden polished board, a wooden beam with steel back plate. complete with two strups, hooks & two 10kg weights. ]", "to verify lamis theorem , [gravesand apparatusboard: wooden with metal base, pulley: z-pullies (2 nos), with adjustable distance, weight set: 5x50 g (3 sets). ]", "simple jib crane apparatus iron stand with weight, [experiment set up with consisting of a tubular compression balance, pivoted about an axis fitted to the base. the tie chain has an adjustable angle bracket and fitted with a 10kg extension balance. completion wooden base with 1.2 meter jib. with weights. ]", "mini drafter, t square, protractor, set squares, compass, divider, [made out of wood. to be used in chalk board]", "model of geometric constriction (solid cube, solid primed, cylinder, cone, hexagon, tetrahedron ), [made out of wood. to be used in chalk board]", "amplitude modulation and demodulation trainer kit, [message signal:100 hz to 2.8 khz, carrier signal 28 khz to 108 khz,modulation : balanced modulator, amplifier : op amp based, demodulation : diode detector & lpf(6th order

CTN :39862405

29 Apr, 2025 5.60 Lacs

Kattappana - Kerala

Tender For purchase of lab instruments for physics core laboratory for the year 2025 under idukki package - digital function generator {0.2 hz to 2 mhz, sine, square, triangular wave, signal amplitude of 20vp-p output }, cro digital- 100 mhz dual channel, arduino set, daniel cell, equivalent, electronic digital vernier calipers, inch and millimeter conversion,lcd screen displays 0-6" caliper measuring tool, automatic shutdown, laboratory thermometer (lc:0.5 degree celsius , should measure upto 150 degree celsius), double slit with various widths marked on, prism equilateral- flint glass, with one face grounded (2"), prism equilateral- crown glass, with one face grounded (2"), voltage source (variable) [0-30 v, 2 outputs, digital display], digital multimeter with voltage ( ac- at least 200 mv to 500 v, dc), current ( ac and dc from ma range) , resistance, frequency, transistor gain (hfe) measurements, laser source- diode 650 nm, 5mw fixed on stand with power supply, solar cell characteristic apparatus, single slit, with various slits marked on the instrument, diffraction grating with 100 lpi/200 lpi/ 500 lpi or their combination with marking on the instrument (different lpi preferred), micrometer screw gauge 0-25 mm, 0.01 mm lc, screw gauge digital micrometer 0-25 mm, 0.01 mm lc, stainless steel digital vernier calipers, 6 inch, stop watch- electronic digital, spectrometer arrangement, lc 1 , travelling microscope, both vertical and horizontal movement lc 0.01 mm, quartz prism- equilateral, mercury lamp with pins ( not screw type), common weighing balance- digital , to weigh upto 10 kg, lc 1gm, digital light intensity meter (range 0 to 200000), katers pendulum, with holder, narrow angle (small angled prism angular measurement 5 x 87.5 x 87.5 ie 5 degree size 32 x32 mm) crown glass, travelling microscope, (bridge) horizontal movement lc 0.01 mm , for newtons ring and airwedge experiments, digital ic tester, analog stop clock (lc:0.5s), diffraction grating with 15000 lpi, digital oscilloscope dual channel input signal generator 100 mhz 1gsa/s sampling rate 7" tft display 240 kb storage, oscilloscope - 2.8" tft handheld digital oscilloscope kit portable automotive oscilloscope, 2.5ms/s high sampling rate, 200khz bandwidth, trigger function auto/nomal/single, helium neon laser 2mw, with power supply, half wave, full wave & bridge rectifier trainer kit, op amp trainer kit -to study op-amp inverting, non-inverting amplifier circuit, to study op-amp summer & subtractor, to study op-amp comparator circuit, to study op-amp voltage follower current follower, to study op-amp differentiator and integrator circuit.to study op-amp null detector, offset current & voltage circuit.to study op-amp clipping amplifier.to study op-amp sample & hold circuit.to study op-amp schimitt trigger circuit., hall effect apparatus complete set, 4 probe experiment apparatus for resistivity and bandgap of semiconductor, bh curve apparatus to study the retenvitya nd coercivity of a ferromagnetic material, apparatus to measureelectrical conductivity of metals and estimation of fermi energy., digital lab thermometer. resolution : 0.1 degree celsius, at least measure upto 200 degree celsius, horse shoe magnet for sonometer experiment (approx 6 inch), stainless steel ruler to measure upto 0.5 mm, digital lcr meter (range: 0.1 h to 20h, 0.1pf to 2000 f, 0.1ohm to 20mohm), special wire stripper for electrician decrustation pliers multi-functional wire stripper and cutter, wire cutter tool, wire cutter stripper, wire cutter plier, 25 pieces spanner set 6 mm to 32 mm

CTN :39822476

15 Apr, 2025 10.00 Lacs

Tikari - Bihar

Tender For supply of lab equipment for d.pharma - ampoule filling & sealing machine , ampoules washing machine , arsenic determination apparatus as per usp , ball mill (1 kg) , body weighing machine 100g to 130kg , pan size (mm)-280 x 280 x 23.5 , camera lucida , capsule counter , capsule filling machine (100 capsules) , clarity test apparatus , digital photoelectric colorimeter with 8 filters (1ml.) %t & abs., conc. and k-factor 1ml sample volume, display: 2 line 16 character , lcd , light source: white led, eight optical filters on a turret to cover 400-700 nm , conductivity meter (digital) , micro controller based, range: 0.1 s - 200 ms , resolution: 0.001 s, temperature : 00 c-, 1000 c (auto / manual), readout : 7 digits led (3 digits for temp. and 4 digits for cond.) , printer interface for 80 column d.m. printer , copper water bath , digital glucometer brand accu-chek , model name instant blood glucose glucometer , battery cell composition lithium lon , operating time 10 seconds , double cone blender , electronic water bath (12 holes, analog, double walled)40 x 30 x 10 with 12 holes of 7.5 cm dia (electric, thermostatic), eye piece micrometer , hutchinson's spirometer, capacity 6 litre complete with chain/chord compensates counter balance to float through pulley. tube calibrated to denote volume. inlet and outlet tubes provided. complete with corrugated tube and mouth piece. , digital melting point apparatus, accurate determination of melting points of solid samples. apparatus should comprised of cylindrical silicon oil bath, built in magnetic stirrer with speed controller, electronic heat controller, digital temp. display with pt 100 sensor, glass free background light with adjustable light intensity, provision for holding the melting point display.temp. range 2c above room temp. to 250c 1.0c, 3% digit , micropipette single channels 1-10 ??, 10-100 ??, 100-1000 l (set of 3). fully autoclavable & uv resistance , click-stop system for digital volume set ting. , ergonomic design ensuring light weight & sof t plunger movement. , two step plunger operation allows "reverse pipet ting technique". , calibration as per din 12650 & en-iso 8655 standards. , high accuracy and precision guaranteed. , individual serial no. permanently marked on each pipet te. , calibration repor t enclosed with every pipet te. , color coded for easy identification , mili pore filter set with membrane dia-25/13mm pore size -0.2/0.4 , nessler's cylinders (50ml)for colour comparison class b graduated , peak flow meter (for adult), potentiometer (digital) bipolar the advantages of the digital potentiometer , 318 at a glance: , high quality precision manual instrument , accurate end point , uniform stirrer , mv range: 0-+1999 , resolution: 1mv , readout: 3% digit led , refractometer (analogue) refrective index , nd-1.3000-1.7000, sugar solution quality dispersion (brix)-0.0-95% brix, accuracy-+/-0.0002nd , refrigerator (domestic) 190l (single door) , bottle sealing machine , sphygmomanometer , stage and eye piece micrometers , stethoscope , tablet coating machine , tincture press , single soxlet extraction unit 250 ml.extraction unit metal stand with heating mantle , g 1 , single soxlet extraction unit 100 ml. , g 1 , conical percolator , heating mantle 250 ml digital with stirrer pu coated aluminium & stainless steel construction simply set power knob to attained selected values designed for advanced laboratory usage ss & aluminium construction for round bottomed flasks as per din 12347 glass fibre yarn knitted mantle provides uniform heating to flask predictable electronic power regulator provision to attach accessories innovative spill collect system enables collection of spillage in case of breakage of flasks upto 5 ltr fewer parts give longer life easy to use and maintain , disintegrator , tablet coating pan unit with hot air blower laboratory size , monsanto's hardness tester , tablet counter - small size , blender , lab ce

Meter Panel Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

State Government