Latest micro motor drill Tenders | Government micro motor drill Tenders

State Government

CTN :40950714

16 Jul, 2025 5.02 Lacs

Jummu - Jammu And Kashmir

Tender For deep drilling of 125mm dia. bore hole and providing, installation, testing and commissioning of submersible pump motor set including allied electro-mechanical work at sm farm tethar, banihal in district ramban on turnkey basis (epc) under capex budget (2025-26)

Central Government/Public Sector

CTN :40954971

19 Jul, 2025 1.08 Crore

Chandrapur - Maharashtra

Tender For hiring of dgms approved portable hydraulic roof bolting machine suitable with wet drilling arrangement drill 1.5m long hole in roof with resin capsule and fitting of bearing plates in g4 bottom section and panel j at bc 3 and 4 pits

Central Government/Public Sector

CTN :40936100

12 Jul, 2025 NA

Medak-T - Telangana

Tender For gas hole drilling of fr.5 tip fuel nozzles

Central Government/Public Sector

CTN :40936101

12 Jul, 2025 NA

Medak-T - Telangana

Tender For gas hole drilling of fr.5, fr.6, fr.9 tip fuel nozzles

State Government

CTN :40947176

22 Jul, 2025 9.51 Lacs

Birbhum - West Bengal

Tender For sinking of rig bored tubewell by down the hole (d.t.h.) method of drilling of size (200mm x 165mm) of 250 mtr. length) at bauripara & kaijuli of md.bazar pwss under birbhum division, p.h.e dte. (sl.no.11)

State Government

CTN :40939435

15 Jul, 2025 4.89 Lacs

Jummu - Jammu And Kashmir

Tender For as per boq - drilling of gravel packed bore hole of 250mm diameter and lowering of liner assembly consisting of blind and strainer pipes of 125mm dia. upto 90 mtr by using direct/ rotary / dual rotary method including installation of mark-ii hand pump and construction of platform as per unicef norms / as per site conditions, providing of 125 mm dia. m.s. casing pipe. the 125mm dia. m.s. casing pipe isi marked should have thickness of 5.4mm conforming to as per is 4270 / 2001 medium class (part-i) 2004 (heavy c class) electric resistance welded beveled ended inside beed free pipes. all pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. there should be no circumferential weld. the pipe from inside should be beed free having smooth finish. each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with is 4270/2001 with latest amendments. all the physical and chemical properties of pipe including tensile strength should be in accordance with is 4270/2001 with latest amendments., providing of pea shaped gravel as per is-4097 of 1967 with latest amendments for gravel packing of hand pump, shrouding during lowering of liner assembly, cost of slotting of ms pipe 125 mm dia ( to be charged as per actual), development of bore hole by air compressor of adequate capacity to give clear water free from sand and impurities, providing, fitting, installation, testing and commissioning of submersible pump set (reputed make) of suitable parameters depending upon the depth and discharge of the bore hole. the job includes erection of tripod stand and fixing of chain pulley block. then lowering of submersible pump set in to the bore hole by way of providing and lowering of 32 mm dia. hdpe pipe, submersible cable with fixtures such as rope, clamp, nuts, bolts & washers. fabrication and fitting of well cap. providing, fitting and installation of single-phase starter cum controller panel in sheet enclosure outdoor type conforming to is standard. providing and laying of 3 core submersible cable and 2-core pvc insulated copper conductor of suitable capacity as service line required from lt pole to starter panel of reputed make and fixing of lt control panel on wall by using wall mount fastners. making of electrical connections with the starter panel, service line and submersible pump set after properly thimbling and testing and commissioning thereof. the job includes the cost of material and labour charges. complete job.

CTN :40936332

14 Jul, 2025 53.72 Lacs

Berhampur - Odisha

Tender For supplying all labour, material and t&p for laying of pipe lines, supplying & fiting of sluice valves, construction of valve chamber, providing fhtc in connection with pws to tumbagada, andanda & sapuakhata under patrapur block. - annexure - a, laying of pipe lines, fiting of sluice valves construction of valve chamber providing fhtc in connection with pws to tumbagada, supplying all labour and t&p for earth work in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of engineer in-charge., supplying all material, labour , t&p for laying of following od hdpepipes conforming to is 4984-2016 and specials of the following outside diameter and class-4 to class-5 and jointing by fusion welding method including testing etc. all complete as per direction of engineer-in-charge, 160mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 110mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 90mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, supplying all labour, t&p for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of engineer-in-charge., supplying all labour, materials, and t&p for drilling perfectly horizontal bore of required dia so as to accommodate following size hdpe. pipe line into the hole including inserting the pipe with out disrupting the traffic or cutting road including jointing with water main pipe lines etc, (excluding cost of pvc pipe) and as per the direction of engineer-in-charge, 160 mm dia hdpe pipe, supplying all labour and t&p for cutting cement concrete road for taking pipe line etc., complete and as per direction of engineer-in-charge., supplying all materials, labour t&p for making good to the damages of cutting of cement concrete road for taking pipe line and with 40 mm size crusher broken metal concrete etc., cc (1:4:8) of thickness 0.10 mtr and top 12 mm size crusher broken chip;s concrete cc(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of engineer-in-charge, supplying all materials, labour and t&p for fixing of following sizes of c.i. sluice / non return valves with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete., 150 mm dia c.i s.v, 150 mm dia c.i n.r.v, 100 mm dia c.i s.v, 80 mm dia c.i s.v, supplying all materials, labour and t&p for fixing of 15mm to 25 mm dia single air valve including fitting of required pvc service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete., supplying all materials, labour, t&p for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with c.c. (1:4:8), kb brick in c.m. (1:6), 12mm cement plaster with c.m. (1:4), rcc cover slab with cc 1:2:4 etc., and as per approved p.h. drawing and design etc., complete and direction of engineer-in-charge., supplying all materials, labour and t&p for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (tata / zindal make) confirming to is 1239(p.1)2004/is:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of engineer-in-charge to be used to cross drainage work incl

CTN :40930487

16 Jul, 2025 4.92 Lacs

Thiruvananthapuram - Kerala

Tender For supply of materials and supplies - erichs dental arch bars -1 per packet (stainless steel erichs type with smooth edges), stainless steel ductile wires -1 per packet (stainless steel ductile wires 26 guage, soft and ductlle for dental wiring), tungsten carbide burs -straight no. 702 -1 per packet(tungsten carbide burs - for straight dental hand piece for bone surgery), tungsten carbide burs - straight no. 703 -1 per packet(tungsten carbide burs - for straight dental hand piece for bone surgery), tungsten carbide burs - straight no. 557 -1 per packet(tungsten carbide burs - for straight dental hand piece for bone surgery), tungsten carbide burs - straight no. 558 -1 per packet(tungsten carbide burs - for straight dental hand piece for bone surgery), tungsten carbide burs - straight no. 701 -1 per packet (tungsten carbide burs - for straight dental hand piece for bone surgery), titanium mini bone plates-pack of 10 plates (2 mm 4 holes with gap), titanium mini bone plates-pack of 10 plates (2 mm 2 holes with gap), titanium mini bone plates-pack of 10 plates (2 mm 6 holes with gap), titanium mini bone plates-pack of 10 plates (1.5 mm 4 holes with gap), titanium mini bone plates-pack of 10 plates (1.5 mm 2 holes with gap), titanium mini bone plates -1 per pack (2 mmcontinuous 16 holes), titanium mini bone plates -1 per pack (1.5 mmcontinuous 12 holes), titaniun self drilling screws -10 per pack (2 mm dia., 8mm long), titaniun self drilling screws -10 per pack (1.5 mm dia., 8mm long), iodoform powder, medical grade 1 per pack (20 mg bottles), lag screws 10 per pack,5 packs (22 mm long, 2mm dia.), drill bits long for lag screws -1 per pack(2 mm dia. straight hand piece, 50 mm long with tc cutting, 20 mm tip), bone wax -1 per pack(packets), lubricating spray -1 per pack (for micromotor hand piece), mucoperiosteal elevator -1 per pack(molt type, long), stainless steel ductile wires -1 per pack (stainless steel ductile wires 28 guage, soft and ductlle for dental wiring), stainless steel ductile wires -1 per pack (stainless steel ductile wires 30 guage, soft and ductlle for dental wiring), b. p. handle no. 3 -1 per pack(stainless steel), titaniun condyle recon plates 2.5 mm system -1 per pack (rt cndyle with 20 holes 2.5 mm dia.), titaniun condyle recon plates 2.5 mm system -1 per pack (lt cndyle with 20 holes 2.5 mm dia.), titaniun condyle recon plates 2.5 mm system -1 per pack (20 hole sraight, 2.5 mm dia, titanium screws 2.5 mm diam., cross slot -10 per pack (2.5 mm diam., 10 mm long, cross slot), dental mouth mirror- 1 per pack (mirror with handle, autoclavable), dental probe -1 per pack (single ended), suction tip metallic -1 per pack(2 mm diam suction tip metallic, autoclavable)

State Government

CTN :40928187

14 Jul, 2025 5.60 Lacs

Jummu - Jammu And Kashmir

Tender For deep drilling of 125mm dia. bore hole and providing, installation, testing and commissioning of submersible pump motor set including allied electro-mechanical work at basic seed station sial sallan in district udhampur on turnkey basis (epc) under capex budget (2025-26)

State Government

CTN :40928188

14 Jul, 2025 3.38 Lacs

Jummu - Jammu And Kashmir

Tender For deep drilling of 125mm dia. bore hole by using odex method including installation, testing and commissioning of submersible pump pump set with allied electro-mechanical works at basic seeds station, manyal in marh constituency of district jammu on turnkey basis (epc) under capex budget (2025-26)

Micro Motor Drill Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors