Get complete information related to latest Mild Steel Angle Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Mild Steel Angle Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Mild Steel Angle Tenders.
Tender For supply of dc to ac adaptor , anabond , thread tape , pvc pipe , flag 3 by 2 ft , 12 volt charging socket , clutch kit , shaft nut , mobile stand , iron angle 1 by 2 inch
Tender For supply of permanent defence pd rubik of size 2.55m x 2.55m o o and 2.10 m height with thickness of interlocking hollow block 25 mm thick , hdpe laminated sand bag of size 75x40 cm , shs 6 mm thick size 120x120mm x 2.4m long for column with holes , ismb 150 rsj 150 x 75 mm g1 3050 mtr long for beam , ismb 150 rsj 150 x 75 mm g2 2.20 mtr long for beam 2 , ismb 125 rsj 125 x 70mm g3 0.40 mtr long for beam , 6 mm thick ms base plate of size 150x150mm for shs column , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column. , steel roofing trough srt of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick hot rolled carbon steel sheet , ms hexagonal nuts. bolts and washers 12 mm dia 40 mm long. , ldpe sheet 3 m wide weighing 1.00 kg rm black in colour , red oxide primer conforming to relevant is , synthetic enamel paint colour green , thinner sample to be approved before supply , dry distemper sample to be approved before supply , chalk whiting sample to be approved before supply , paint brush 4 inch , pre fabricated double door shutter steel door of size 1100mmx1900mm made out of 2mm thick , supply of swivel bullet proof glass glass 610mm x300mmx 72 mm thick , silicone gel sealent of 01 pack of 400 gms including aplicator gun , ply wood 10 mm thick for pcc form work. , foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , sifcon pre fabricated interlocking rcc blocks. , aggregate 20mm. , natural manufactured sand , aggregate 40mm , rapidite conforming to is 1344 2018 make acclerex cico fosroc , integrated water proofing compound. , aluminimum straight edge 50mm squre 2mm thick 1800mm long , wooden flat gurmala , water leveling pipe pvc 100 mtr , hand rivet gun machine , drill bit 6mm dia , drill bit 8mm dia , tape measuring metallic 30 m , mason trowel karchi , tasla iron 18 inch , shovel with wooden handle , axe picks with wooden handle , fawda with wooden handle , crobar 5 feet long , rammer with wooden handle of wt 5 10 kg , sieve for sieving fine and crose agg 900 x 1500mm made of angle iron frame with stand , brick hammer 1 2 kgs , cutting plier insulate 6 inch , screw driver 12 inch with insulated plastic , pipe wrench 12 inch , pipe wrench 18 inch , adjustable spanner 12 inch , hacksaw frame with 2 blade , hand gloves canvas with isi mark , aluminium sprit level 6 inch , brick line , plumbob
Tender For supply of portable magnetic core drilling machine as per the following specification. 1) material work pieces: i) carbon steel & low alloy steel sheets. ii) st ainless steel sheets. iii) mildsteelangles 2) core drilling capacity: 12-35mm 3) twist drill capacity: 1-12mm 4) cutting depth: 50mm 5) motor power: 1500w + /-10% 6) magnetic force: 14000n (minimum) 7) no load speed: 750rpm 8) spindle: 19.05mm weldon 9) maximum weight: 11kg 10) warranty: minimum 12 mo nths against manufacturing defects 11) operating manual and maintenance manual shall be submitted along with machine. make: ojasvi/eibenstock/schif fler/kpt/bosch. [ warranty period: 12 months after the date of delivery ]
Tender For supply of materials/items for mgnrega works nancowry block for fy-2025-26 - rate for accssible ares (kamorta & nancowry islands), cement (o.p.c) 43-grade, crusher dust good quality, pulverised sand good quality, coarse sand good quality, boulder 40-90mm, stone aggregate 40 mm, stone aggregate 20 mm, stone aggregate 12.5/13.2mm, cement concrete hollow block 40x15x20 cms, cement concrete hollow block 40x10x20 cms, m.s flat various size, m.s angle various size, tmt steel bars various size, binding wire good quality, nailsvarious size, nut & bolt various size, j hook various size, coach screw with cap washer 2 , self type screw various sizes as per requirement, ply wood anti-termite (commercial), approved/ reputed brand. 12 mm thick, ply wood water proof & factory painted (marine), approved/ reputed brand. 19 mm thick, pre painted galvanised (ppgi) roofing sheet 9 feet, ppgi plain sheet 2 feet width, cement primer (reputed brand.) good quality, wood primer (reputed brand.) good quality, oil bound distemper (reputed brand.) good quality, synthetic enamel paint (reputed brand) good quality, painting brush (amar) various sizes, sliding bolt make classic 300x16mm, window handles (anodized) various sizes as per requirement, iron hinges various sizes as per requirement, tower bolt (anodized) various sizes as per requirement, w/c pan complete set make hindustan or any other reputed company indian type (460x440) mm, pvc pipe make hindustan 100 mm, pvc pipe 3 inch, thinner make sheenlac good quality, steel hand saw for wood good quality, saw file (triangular) 4 inch, augur 3/8 inch, wooden shuttering with propping good quality wood, g.i. wire mesh of dia. 4mm, pvc coated to achieve outer dia. not less than 5mm in required colour, shade and height. (reputed brand) mesh size 100x100mm, pre cast rcc post for fencing top width-12cm, bottom width-15cm, height-1.70m, main bars-4 nos.10mm dia, stirrups-8mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc hume pipe. inner dia-1.00m, length-1.00m, thickness-10cm, main bars-12mm dia, stirrups-10mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc hume pipe inner dia-0.50m, length-1.00m, thickness-10cm, main bars-12mm dia, stirrups-10mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc ring for c/o ring well inner dia-2.0m., height-30cm, thickness-8cm, vertical main bars- 8mm dia@10cm c/c spacing , and 3 nos. 8mm dia distribution bars of rcc mix-1:1.5:3, plump bob good quality, sledge hammer good quality, ball peen hammer good quality, try square good quality, trowel good quality, mixing pan good quality, pvc cowl 100mm, pvc door frame make rajshree 50x47mm wide 5mm thick, pvc door 30x50mm wide 5mm thick and 75mm wide pvc sheets for top rail, preparation & installation of citizen information board fully metallic board of (4x3) feet on 4 feet stand. black coloured board with information written in white and have to fix with concrete footing at work site, preparation & installation of citizen information board fully metallic board of (2x3) feet on 4 feet stand. black coloured board with information written in white and have to fix with concrete footing at work site, preparation & installation of citizen information board fully wooden board of (4x3) feet on 4 feet stand. black coloured board with information written in white and have to fix proper footing support., mooram good quality, epoxy paint standard, red oxide paint standard, welding charges arc welding, mixer machine (on hire) 10/7 cubic feet or 1 bag capacity, hiring of road roller8 tonne, precast rcc circular slab of 1.44 sqm,thickness-5 cm, main bars-8 mm dia, distribution bars-8mm dia @100mm c/c spacing, rcc mix-1:1.5:3, rate for inaccssible areas (katchal, teressa & chowra islands), cement (o.p.c) 43-grade, crusher dust good quality, pulverised sand good quality, coarse sand good quality, boulder 40-90mm, stone aggregate 40 mm, stone aggregate 20 mm, stone aggregate 12.5/13.2mm, cement concrete hollow b
Tender For supply of rod welding steelmild , steelangle , steelmild square , steel bar alloy hot rolled , steel bar alloy , electrodes welding steel high , bolts bsw black steel
Tender For rrsmp-25-26 bagaha-1-04 - phagunahta to phagunahta sah tola, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., construction of un-reinforced, plain cement concrete pavement (m35 grade) over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of 0.5 x 0.5 panel, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.ii) km stone, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.iii) 200 m stone, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mildsteelangle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. i)600 mm equilateral & triangle,, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mildsteelangle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. ii)600 mm circular ,, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mildsteelangle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. iii)600 mm x 450 mm rectangular,, providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes. at edge for cc portion, providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate w
Tender For rrsmp/25-26 bagaha-1/01 - bathwariya to bathwariya purab tola, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., construction of un-reinforced, plain cement concrete pavement (m35 grade) over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of 0.5 x 0.5 panel, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.ii) km stone, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.iii) 200 m stone, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mildsteelangle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. i)600 mm equilateral & triangle,, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mildsteelangle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. ii)600 mm circular ,, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mildsteelangle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. iii)600 mm x 450 mm rectangular,, providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes. at edge for cc portion, providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate
Tender For rrsmp/25-26 bagaha-1/02 - binwaliya p.school to sikatiya pmgsy road, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., construction of un-reinforced, plain cement concrete pavement (m35 grade) over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of 0.5 x 0.5 panel, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.ii) km stone, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.iii) 200 m stone, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mildsteelangle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. i)600 mm equilateral & triangle,, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mildsteelangle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. ii)600 mm circular ,, providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mildsteelangle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. iii)600 mm x 450 mm rectangular,, providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes. at edge for cc portion, providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle
Tender For rrsmp/25-26 araria/08 - laluwabari pmgsy near bridge to purnea sima via karhmana, clearing and grubbing :- clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying :- scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade and earthen shoulders :- construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material(grade ii) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., water bound macadam gr iii :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., pavement quality concrete (pqc) :- construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703., km stone, 200 m stone, retro-reflectorised traffic signsproviding and erecting direction and place identification retro-\reflectorised sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mildsteelangle iron posts 75 mm x 75 mm x 6 mm, 2 nos. firmly fixed to the ground by means of properly designed foundation with m-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and technical specification clause 1701., providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mildsteelangle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification clause 801, 600 mm eq