Get complete information related to latest Milk Packing Item Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Milk Packing Item Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Milk Packing Item Tenders.
Tender For supply of one coach set of body shell items for m & m2 coaches (mrvc phase ii)to drg. nos. icf/mrvc/m/bt-1-0-008/col.i -1no alt 'c' icf/mrvc/m/bt-1-0-009/col.i -1no alt 'b' icf/mrvc/ m/bt-1-0-010/col.i -1no alt 'f', icf/mrvc/m/bt-1-0-013/col.i -1no alt 'nil' icf/mrvc/m/bt-1-0-015/ col.i -1no alt 'a'. icf/mrvc/m/bt-1-0-023/col.i -1no alt 'a' special condition : - packing as per ic f/j&t/sk-1865. all the items are to be supplied as coach set only. [ warranty period: 30 mon ths after the date of delivery ]
Tender For supply of set of earthing block & bracket for fuse terminal board amrit bharat hot buffet car. note:-firm shall collect all latest/final drawings before manufacturing. t here may be minor modification in design to suit railway requirement & modification to be carried out by firm at no further cost to railway., as per drawing: mp24ebbtblcbab ve rsion 0, packing instruction: no special packing required. the protruding, threaded portio n, gauges and loose items etc. if any are to be protected with suitable covering to prevent it from damage. however transit damage if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]
Tender For supply of set of roof arch complete for amrit bharat non ac hot buffet coaches. no te:-firm shall collect all latest/final drawings before manufacturing. there may be mi nor modification in design to suit railway requirement & modification to be carried ou t by firm at no further cost to railway., as per drawing: mp24arch version 0, packing instru ction: no special packing required. the protruding, threaded portion, gauges and loose items etc. if any are to be protected with suitable covering to prevent it from damage. however transit damage if any shall be at the cost of supplier. [ warranty period: 30 mo nths after the date of delivery ]
Tender For supply of complete wsp system from from m/s escort ltd. for lhb coaches (all items will be as per rdso/2011/cg-04 rev.02.material to be supplied to nodal consigne of zonal railways as per details attached in annexure1 l.no.rcf/hsq/plg/mpsp/46024/escorts), as per drawing: mpe scwsplhb version 1, packing instruction: packing as per standard packing [ warranty period : 30 months after the date of delivery ]
Tender For supply of complete wsp system from m/s knorr-bremse india pvt. ltd. for lhb coaches (all items will be as per rdso/2011/cg-04 rev. 02. material to be supplied to nodal consigne of z onal railways as per details attached in annexure1 l.no.rcf/hsq/plg/mpsp/46024/kbi, as per drawin g: mpknorrwsplhb version 0, packing instruction: packing as per standard packing [ warran ty period: 30 months after the date of delivery ]
Tender For supply of complete wsp system from m/s faiveley transport rail technologies india lt d. for lhb coaches (all items will be as per rdso/2011/cg-04 rev. 02. material tobe supplied t o nodal consignee of zonal railways as per details attached in annexure1 l.no.rcf/hsq/plg/mpsp/46 024/ftil), as per drawing: mpfaivwsplhb version 1, packing instruction: packing as per standa rd packing [ warranty period: 30 months after the date of delivery ]
Tender For supply of poh kit for 10" bmbs cylinder consisting of 10 items as per rdso drg no. wd-08095-s-01 alt- nil or latest & rdso spec no. - wd-23-bmbs-2008 rev- 01 as follows: 1) packing cap kbi part no. 766 272 or similar qty-01 no. 2) expansion plug kbi part no. 759488 or similar, qty- 01 no. 3)wiper ring kbi p art no. - 769953 or similar, qty- 01 no. 4) wiper ring kbi part no. - 772262 or similar, qty- 01 no. 5) o ri ng kbi part no.- 751374 or similar, qty - 01 no. 6) guide ring kbi part no. - 732485 or similar, qty - 01 no ., 7) brake cylinder gasket kbi part no. - 777140 or similar, qty - 01 no 8) o ring kbi part no. - 760069 or similar, qty - 01 no. 9) o ring kbi part no. - 755559 or similar, qty-02 no. 10) screw self locking head k bi part no. - 734734 or similar, qty - 01 no. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa
Tender For supply of set of rubber packing (gasket) for doors & windows of 3 phase locomotives, consisting of 09 items conforming to clw specification clw/ms/3/034 alt-6 . set details as per attached annexur e. [ warranty period: 30 months after the date of delivery ]