Latest milk weigher Tenders | Government milk weigher Tenders

CTN :38936565

23 Jan, 2025 4.47 Lacs

Ramgarh - Jharkhand

Tender For supply of humidity chamber (q3) , laboratory drying oven (q3) , muffle furnace (q3) , micro weighing balance with licensed software (q3)

CTN :38917495

01 Feb, 2025 12.00 Lacs

Jind - Haryana

Tender For purchase of various apparatus/instruments required for department of chemistry, chaudhary ranbir singh university, jind - stirrer the stirrer should be made up of ceramic coated aluminium alloy top with digital speed and temperature control. the stirring speed should be 50-1500 rpm or better. the stirrer should be operational up to a temperature range of 300oc with an accuracy of 1.0oc and ip 42 protection class. the input power should be 600 w or above. the stirrer should be supplied with hemispheric bowl (100 ml= 1 no; 250 ml= 1 no) to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks., electronic balance the electronic balance should have a maximum weighing capacity of 200 g or more with a resolution and repeatability of 0.1 mg, and a response time of 5 sec or better. the system should have automatic internal calibration with touch screen display. the system should have internal database capacity of 2500 or more with multiuser password protection feature. , vacuum pumpthe pump should be operational at a maximum power of 65 w or more with a max. vaccum of 99 mbar or more. the pump should be fitted with vacuum and filter cartridge., hot air oventhe inner chamber should be made of stainless steel and the outer chamber should be m.s powder coated. the maximum capacity of the oven should be 100 ml or more. the operational temperature should be between ambient to 250 oc or more with a temperature accuracy of 1o c. pid based digital temperature control., double distillation unitthe unit should be pyrogen free with a distillation water output capacity of 1.5 l/h. the minimum cooling water requirement should be 1lt/min. auto-power cut facility in case of halted supply of water., circulating oil baththe oil bath should be made up of stainless steel with 4 digit 7 segment led display for temperature and time. the bath should have s.s perforated tray for holding flasks. the bath should have a capacity to accommodate flask of 1l. the working temperature range should be +5 to 240 oc (0.1 oc increment) with a temperature stability of 1oc., water baththe water bath should have a capacity of 20 l within built water level sensor. the bath should be made up of stainless steel and supplied with 8 concentric rings. the bath should have digital temperature control with pt100 sensor. the system should have stirring capability with ptfe magnetic bars. , ph conductivity meter operational between a ph range of -2 to 16.00 with a resolution of 0.01 ph and an accuracy of 0.02 ph. 5 points calibration. the ec range should be in between 0.00 to 29.99 s/cm, uv cabinet operational at two uv wavelengths (254 and 365 nm). the cabinet should also be equipped with one visible light. the external body should be coated with ms powder/epoxy., flame photometerapplication: the flame photometer is used for qualitative and quantitative determination of several cations, especially for metals that are easily excited to higher energy levels at flametemperature. these metals include na+, k+, ca2+, ba2+ and li2+.specification requirementmeasuring range na+: 0 to 99.9 ppm k+:0 to 99.9 ppm ca2+ :0-99.9 ppmli2+: 0 to 99.99 ppmsensitivity na+= 0.1 ppmk+ = 0.1 ppmspecificity less than 0.5% interference when concentrations are equal to test sample concentrationsgas control-adjustable with knobsignition system-auto ignition systemflame failure-auto detectiongas cut off-automaticreproducibility-less than 1% coefficient of variation for 20 consecutive samplesusing 10 ppm na set as maximum standardlinearity-less than 1%display led, 12.5 mm (1/2")fuel supply-high-grade propane/butane mixture regulated at approximately30 psiair supply-6 l/min at 12 psi; oil and moisture freerecorder-output 0.05 to 5 v (switchable)operating manuals, service manuals, other manuals should provide user, technical and maintenance manuals in english language list of equipment and procedures required for local calibration and routine maintenance service and

State Government

CTN :38869319

18 Jan, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit

State Government

CTN :38869323

18 Jan, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digital

CTN :38901239

29 Jan, 2025 NA

Ernakulam - Kerala

Tender For supply of lab equipments - department of dravyaguna, buchner funnel, dean and stark with stop clock, plastic can-5 l,pet, condenser-b40/38, condenser-b14/26, mortar and pestle-stainless steel, dissecting microscope, magnification lens with light, dissection box, digital weighing scale -up to 10gms with accuracy 0.001mg, tlc kit with tlc applicator, tlc platform, atomizer, glass plates tlc chamber and tlc scale, digital ph meter, pycnometer, uv cabinet, d/w brushes, dissecting needle, pipe clay triangles, evaporating dish, hand gloves cloth-cotton padded oven gloves(pairs), department of prasuthitantra, gloves (unsterile) 7 inch(packets), sterlized gloves ( 7 inch), disposable under pads ,double layer, with absorbent core, tear and slip resistant with waterproof back sheet, examination table disposable sheet, hot water bag2l made of rubber20cm x 30 cm, perineometer analog type-with 3 vaginal probes for exercise training, ovum forceps 250mm x 10 metal, iv stand6ft height stainless steel with fibre base and 2 hooks, cusco s speculum (medium -10 no.s and large-10 no.s), cotton swab stick, kochers forceps, hegar cervical dialator set, green armytage forceps, iucd removing hook, endocervical speculam, electro surgical cautery machine, department of koumarabritya, ball pool ( multicolour, frame material plastic, ball material polyester, lxwxh (1m x 60cm x 30 cm), r & b analytical lab, simple monocular microscope, department of agadathantra, arg labs multi- functional nursing care manikin male, indo surgical stomach pump tube, isko cpr training mannequin half body gupta scientific & glass works, examination table disposable sheet, hicks bs-x976 white infrared thermometer, clear & sure frosted microscope glass slide, ground edges & lint free packing/ pack of 50 slide, derma pen battery operated (derma ultima pro basic 0.25mm to 2.0mm) with 10 pieces needle cartridge, 18 ga dispensing needle (100 piece), surgical magnifying lens 4 inch, flat bottom borosilicate glass dish- 4.6" diameter -, laboratory watch glass (pack of 6) (10 mm), gem lab small test tube 15ml (6 pieces) with plastic test tube stand and borosilicate glass with rim and wooden handle chromium plated test tube holder combo of 8 products, wart speckle remover pen -dimension 10x5x5 cm,material abs,item form -pen, indo surgicals silvery stethoscope, gas / electric burner-bunsen burner, test tube stand-100 capacity, department of salyatantra, clinical thermometer (mercury), mosquito forceps, suture cutting scissors, foleys urinary catheter (16 f), butterfly iv cannula 19g (yellow), roof fitted shadowless lamp with reflectors for operation theatre halogen series 700 s, electro cautery machine 50w (small), salyathantra ot, examination gloves (disposable) medium- 100 nos box, absorbent gauze cloth 10 m x 1 m, department of rachanasareera, disposable gloves box, rubber gloves, washable apron, department of shalakyatantra, trial frame adult, paediatric t frame, led mini near vision chart, prism bar set, raf ruler, salakyatantra dental op, airotor handpiece, glass ionomer cement (no 9), normal saline -500ml, disposable glass, lignocaine hydrochloride injection, syringe 2.5ml, mouth mirror, probe, tweezer, hand piece lubrication tube spray, suction tip plastic, rc help, polishing bur, round bur, salakyatantra ot, sterile gauze and pad for eye bandaging, mortar and pestle --- clay, insulin syringe - 3 ig x 6 mm, 3m micropore 1530-1, 1 inch x 10 ya rd, surgical blade 11, surgical scissors, ordinary scissors, department of kayachikitsa, fort shaped medical monofilament, rubber tube (nadi swedam), infrared lamp, cheatle forceps (10 inch), sponge holding forceps, astery forceps, vasti netram (bronze), department of panchakarma, janu vasthi apparatus - small, medium, large, xl-5 each, ir lamp - deep penetration, ir lamp, cautery pen - surgical cautery pencilsurgical cautery, mini pocket weighing scale digital, department of r&b, fulcrum hand pallet truck, mortar of pes

CTN :38748465

17 Jan, 2025 70.00 Lacs

Ujjain - Madhya Pradesh

Tender For suppllay of leb equpment - :supplay of leb equpment, laserdistancemeter, gps(waterproof), digital camera(dslr), videocamera, drone, electric generator (solarpanel), portable genrator, tripoddigital, studio light, glmbal strilizer, camaraeosr6markiiandextralence2pcs, lensforcamera, autolevel, vernier calliper (digital), eletromagnetic metal detector, 3d imaging metal detector, compass digital, total station, telescope, digital placo meter, microscope, phmeter, weighing balance (0.0001), colourimeter, magnetic stirrer, fumigation chamber, hotplates, judo mats

Milk Weigher Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government