Latest milliammeter Tenders | Government milliammeter Tenders

State Government

CTN :41300864

07 Aug, 2025 49.50 Lacs

Chittorgarh - Rajasthan

Tender For supply of building material & equipements supply at gp kankrwa --, sand/gravel, , gravel, , gravel - local, , rakhi (fly ash), , surkhi, , stone turning (in stonework, masonry), , soling. kharanja / masonry stone, , masonry berdada (rr), , masonry ratta (cr), , kharanja molig (for floor work upto 15cm height), , kharja soling (23cm height for mudka kharja work), , soil stoneware (for other than road work) 40mm measuring stone (hand broken grit) cut into 1/11, , 40mm stone cut (broken by crusher) 1/11, , 20mm grit stone (broken by crusher) cut into 1/11, , 12/10/6mm stone chips (broken by crusher) 1/11, , torn, , brick ballast, , cement (ppc fly ash based is code 1479 part-11991), , white cement, , structural steel, , iron (tor steel fe 415/500 for reinforcement), , winding wire 18 gauge, , iron guard, , konia iron/ square bar/ patti/ angle iron, , barbed tohe wire, , size 12 gauge wire and 12 gauge strad, , plain sheet, , gi sheet 22 gauge (0.80 mm), , g.i. sheet 24 gauge (0.63mm.), , m.s. sheet 22 gauge (0.80 m.m.), , m.s.sheet 24 gauge(0.63m.μ.), , corrugated sheet, , gi sheet 1mm thick, , gi sheet 22 gauge (0.80 m.m.), , other ingredients, , ghila/kankar/jhajhra, , mud masala, , lime of kali bhatt for lime masonry work, , corrugated sheet, , asbestos cement ghaddar 6mm (2.5/2.75x1m), , other rank, , pvc wall 1mm thick (coloured / plain), , lighteruf expo sheet in green yellow (183×90), , road work materials, , 63-40 mm crushed stone aggregate cut into 1/11, , 63-40mm hand broken stone aggregate 1/11 cut, , 90-45 mm. hand broken stone aggregate 1/11 split, , qderi ravish 1/6 cut, , gravel cut 1/6, , kakar 1/11 phat, , biding material(pi 4-6), , camel (22.5 x 11 x 7.50 cm), , is class (, , izfke js.kh, , ii class, , flaky material, , ), , stone ivvh (ave. length 3" to 4", width 2", , to 3", thick 1" to 2" flaky material), , sandstone (dpc, sill, coping, lintel, tand, almirh, , a etc), , up to 25mm thickness, , up to 25-40mm thickness, , upto 40-50mm thickness, , 00-150mm thickness, , do. patti pattan kata stone, , curry leaves upto 35mm thick, min. 3 sqft or, , more area, , katla for butti filling 60-75mm thickness, min., , soft or more area, , palika and kodar don (3 sqft), , up to 800 sq. m, , from 201 to 2300 sq.m., , more than 2300 sq.cm, , moulish kanda stone one side polished (3 sqft) from maha, , upto 200 sq.cm, , 501 to 2300 sq. cm., , more than 2300 cm, , parbal stone (bigger than 3 sqft), , makrana adanga marble 15 to 20 cm thickness, , upto 800 sq.cm, , 901 to 2300 sq. cm rock, , more than 2300 sq.cm, , rajnagar first quality marble 15 to 20 cm thickness, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble pips, , marble powder, , stone threshold, , single patam size 100 x 75mm, , double patam size 125 x 75 mm, , stone slab, , up to 1.5m length, minimum 40mm thick, , 1.5 to2.40mlength, minimum 50mm thick, , 2.4 to3m length, minimum 65mm thick, , above 3m' length, minimum 75mm thick, , local wood with fittings (doors, windows and, , for furniture), , mango, , change, , other, , factory made doors (30mm thick, solid core single, , palle), , caste, , iron mesh (24 gauge, 14 mesh), , cement concrete mesh sky underground 40mm thick, , glass, , 3 mm nota glass, , complexion belly, , inamil paint, , distemper, , lime - for painting (rest / bud), , primer, , petroleum substance diesel hsd, , mobil oil, , bitumen shalitax board, , sanitary, , indian w.c., , omisa w.c., , european w.c, , foot rest, , porcelain lipped urinal, , 430-350-300mm with coupling, bracket and pvc., , wash-basin 450*300mm with waste pipe, , coupling bracket and pvc waste pipe, , stone brother (s.w.) pipe 100 m.m. diameter, 0.6 m. long, , c.p. pillar cock (is mark), , c p bibb kak (is mark), , 125mm diameter cp grating, , rcc np3 hyam pipe with collar, , 1200mm diameter, , 1000mm diameter, , 750mm diameter, , 600mm yyas, , l, , 450mm diameter, , 2, , 300mm diameter, , 3, , fr pvc insulated copper conductor single core, , cable

CTN :38924587

22 Aug, 2025 12.74 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin wireman tradeat iti kubernagar, gujarat, indiapackage 5: wireman trade - low voltage control and systems., residential and small business systems, electrical machine trainer, motor-generator (ac to dc), motor generator (dc to ac) set, linear i.c. trainer, digital i.c. trainer, grid connected industrial photovoltaic training system three phase system, component of typical small hydro power, component of typical water mill, off-grid photovoltaic training system with solar pump system single phase system, building control systems and automation, industrial control system and automation, 20 kv voltage distribution and grid control system, testing lab, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester

CTN :38924592

22 Aug, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin electrician tradeat iti vyara, gujarat, india - electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. induction motor rating: dc shunt generator rating: induction motor rating: dc shunt generator rating:, motor generator (dc to ac) set consisting of-shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. shunt motor rating: ac generator rating:, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems. with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, residential and small business systems with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, building control systems and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, industrial control system and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, solar system lab suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility with circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the testing by the student, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester

corporations/Associations/Others

CTN :41277675

07 Aug, 2025 NA

Pimpri - Maharashtra

Tender For 3/2025-26 estimated rates for uhwc instruments - estimated rate for instruments uhwc, technical specification of dressing tray with cover material should be stainless steel medical grade size 300*200*50mm with led, technical specification of dressing drums with cover 11 19 material should be stainless steel ss 304 capacity 0.945 liters should be seamless, technical specification of weighing machine (infant) capacity upto 20 kg resolution 10 gm. accuracy + 1to 10 gm. measuring position supine, sitting and standing. large lcd display, technical specification of surgical scissors made of stainless steel 150 mm, 6 inch size, technical specification of sphygmomanometer aneroid 300mm with cuffkey technical specifications:cuff: typically made of durable, washable material (e.g., nylon) and reinforced at the sides. size: ranges from child to adult sizes (small, medium, large, extra-large), and ideally, the cuff bladder length should be at least 80% of the patients arm circumference and the width at least 40%. fastening: usually features velcro or similar for a secure fit. bladder: inflatable bag within the cuff, connected to the inflation system. inflation system: bulb with a valve for inflating the bladder and a pressure release valve. gauge:aneroid: features a dial with a needle indicating pressure, usually graduated in 2 mmhg increments from 0 to 300 mmhg. digital: provides electronic readings of blood pressure and may include features like pulse rate measurement. tube: typically made of rubber or silicone, crack-resistant, with a length of around 70 cm. accuracy: aneroid gauges are generally calibrated to meet certain accuracy standards, such as +/- 3 mmhg. materials: materials used in sphygmomanometers must be durable, corrosion-resistant, and suitable for the intended use. environmental: sphygmomanometers are designed to function within specific temperature and humidity ranges, typically 5 to 40 c and 15 to 85% rh. , technical specification of sims retractor/depressor 1/2/3/4 size stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of cheatle foreceps 8/10/12 size stainless steel material should be medical grade anticorrosive and nonmagnetic, technical specification of sponge holder 6/8/10/12 size stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of plain forcep plain forcep of size 6/8 inchs stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of tooth forcep tooth forcep of size 6/8 inchs stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of needle holder 6/8 inchs long, locking stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of stethoscope chest piece finish : black, machined stainless steel chest piece size : 1.75 inch / 4.4 cm chest piece technology : double sided diaphragm material :epoxy/fiberglass eartip type : soft sealing headset material : wide diameter aerospace alloy / anodized aluminium length : 28 inch stethoscope with extra ear plug & diapharm, technical specification of hub cutter the cutting blade of the cutter will be made of stainless the thickness of the blade will not be less than 0.5 mm one side sharpen to cut minimum of 10,000 cuts. all other metal if used in the hub cutter will be made of galvanized carbon steel which will withstand rusting even in rough weather with high humidity coastal region for a minimum of five year(is 277 of 2003 galvanized steel sheet specification) the sharp container should be made of polypropylene (pp) of not less than 4 mm thick and should be white/translucent. shape: the shape of the container will be such that the lid is tightened with the body. capacity range : able to destroy from hub of ad syringe with needles from 18-28 gauge diameter and from 10-25 mm length and fitted with all types of needle fitti

Central Government / Public Sector

CTN :41279960

06 Aug, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of wheel diameter gauge (folding type) for wag-9 loco measuring range 1000 to 1 120mm, accuracy 0.1mm, as per s.c. rly. drg. no. c/els/lgd/genl/3/5 alt- 2 or latest [ warranty pe riod: 30 months after the date of delivery ]

CTN :40886623

02 Aug, 2025 NA

Belgaum - Karnataka

Tender For bid to ras supply of oil charging rig , hydrometer , medium size stainless steel funnel with wire mesh strainer diameter 1 inch , glass sampling jar with metal lid 250 ml , glass measuring jar 500 ml , sampling jar with metal lid 1000 ml , thermometer , pressure hoses 15 mtr , pressure hoses 3 mtr , pressure gauge , detonator cavity gauge , injector tester , spark plug tester , crocodile jack , bench vice , dip tray , tyre lever , metal job , gloves heat resistance , dip tray , injector tester , injector , hydraulic jack with handle , notch adjuster

CTN :41192702

29 Aug, 2025 NA

Srinagar - Jammu And Kashmir

Tender For surgical instruments for ent surgeries. - ear speculum (shea & lempert), lempert endaural speculum, jenson mastoid retractor, micro ear suction cannulas with adaptor all different sizes (12-22 gauge), chisel with adapter., ear dissector, curved backwards, working length 5.5cm, total length 16cm., ear dissector, curved backwards, working length 5.5 cm total length 16cm., curette spoon shaped, diameter 1 mm, length 16 cm, house double curette, medium, spoon size 1x1.8mm, and 1x1.2mm, length 17cm, lempert s curette, rosens round knife diameter 3 mm, with suction pores, ear up forceps (delicate oval cupped jaws, 0.6 mm working length 10 cm), cat s paw retractor., faraboeuf periosteum elevator-115-117m length, 11mm wide curved, suction cannula angular luer lock outer diameter 1.3mm, 1.5mm & 2mm length 6 cm, myringotomy knife, luer cone suction adaptor for connection to suction tube with hole., micro scissors, delicate curved to left & right working length 8 cm and 8mm blade, ear alligator forceps extra delicate serrate 1x4.5mm working length 8cm, rosen sround knife with 1mm 1.5mm, 2mm, 2.3mm, 3.0mm, 3.5mm diameter, working length 16 cm and angle 45 , flag knife., wullstein curved needle,, right angled needle, flap repository, micro ear scissors, ossicles holding nibbler, cell seeker, micro ball probe, aditus seeker, plester sickle knife, duckbill, shea bellucci micro ear scissors straight, adjustable self-retaining surgical ear speculum, castroviejo iris scissors straight curved (14cm), micro ear forceps-oval cupped jaw straight 80mm,shaft 1.5mm thick, micro alligator forceps-line, wullestein needle-straight sharp 165mm length, wullestein post aural retractor-3x3 sharp prongs 110mm length, plester retractor 2x2 prongs 130mm length, belluci micro scissior -4 mm blade 80 mm length, i. straight, ii. right curved, iii. left curved, angled picks (45 degree and 90 degree), shea s perforators (0.6mm, 0.8mm), house gel foam pressure forceps large platform 30mm x 30mm, schwaber adjustable self retaining surgical ear speculum 50 mm blade, length 165mm, grommet applicator, autoclave instrument box with silicon mat, graft spreader, burr points, cutting 1 mm , 0.8mm tungsten carbide coated, cutting 2mm, tungsten carbide coated, cutting 3mm, tungsten carbide coated, cutting 4mm, tungsten carbide coated, cutting 5mm, tungsten carbide coated, cutting 6mm, tungsten carbide coated, cutting 1.2mm, tungsten carbide coated, cutting 0.1mm, tungsten carbide coated, diamond burr points 2min,, diamond burr points 1mm,, diamond burr points 0.8mm, diamond burr points 3mm, diamond burr points 4mm, sphenoid punch., stapes footplate perforator (0.3mm, 0.4mm,0.5mm,0.6mm,), fisch perforator 0.3mm, 0.4mm, 0.5mm, 0.6mm (length-160mm), crurotomy scissors (fisch, prosthesis crimper., fisch hook for piston, measuring plate for stapes (zig), micropick 45 and 90 angled , 0.2mm and 0.4mm (165mm length), measuring rod, crimping forceps., myringotomy knife, grommet applicator, microdrill with motors, hopkins rod wide angle straight forward telescope 0 , enlarged view, diameter 4mm, length 18 cm, autoclavable, fiber optic light transmission incorporated, color code: green., nasal endoscopes (hopkin s ) rod system of 2.7mm, with 0 . 30 .45 . 70 . 90 angles & length 18cm., nasal endoscopes (hopkin s) rod system of 3mm, with 0 . 30 .45 . 70 . 90 angles & length 18cm., nasal endoscopes (hopkin s) rod systemof 4mm with 0 . 30 .45 . 70 . 90 angles & length 18cm, frontal sinus curette. 55 curved, oval, forward cutting , length 19-20cm, nasal sickle knife, pointed, length 19-20 cm., freer elevator, double ended, semi sharp and blunt, length 20cm., antrum curette, oblong, small size, length 19 cm., frontal sinus curette, 90 curved, oval forward cutting length 19 cm., probe double ended, maxillary sinus ostium secker, ball-shaped, cottle elevator double ended, semisharp and blunt graduated, length 20cm, bipolar coagulating forceps, insulated,angular, blunt, fo

CTN :41232425

12 Aug, 2025 NA

Gaya - Bihar

Tender For supply of core cutter , pycnometer , sand pouring cylender , liquid limit set devicecasagrande grooving tools and gauge block with ac supply , plastic limit set,glass plate , shrinkage limit set , hydrometer , i.s. sieves 20 cm diameter brass aperture , infrared moisture meter , direct shear apparatus , digital laboratory oven , proctor test apparatus for light compaction , proctor test apparatus for heavy compaction, , electronic balance , sieve shaker, motorized, with built-in digital timer , density bottle , 15 litre capacity, temperature controlled led water bath , stopwatch, accuracy , glass measuring cylender , meter scale , sand bath,device with tray, stove, palet, knife, , thermometer , rapid moisture meter, speedy moisture meter, , non corrodible air tight container or can , relative density apparatus , standard penetration test , triaxial shear test apparatus , prismatic compass with tripodm ring , cloth tape 50 m , ranging rod3 meter , leveling staff, aluminum leveling staff , plain table with all assoceries , cross staff , prismatic square with pwd pattern , engineer measuring chain 30m , arrows, metal , transit theodolite ) /bid number : gem/2025/b/6486296 * /dated: 28-07-2025 & & / bid document 1 / 29

Central Government/Public Sector

CTN :41224443

04 Aug, 2025 NA

Thane - Maharashtra

Tender For measuring instruments including survey instruments (other than electrical gauges, scales, m easuring portable wheel diameter gauge, suitable for open wheel sets showing the reading of wheel diamet er directly on scale coated with anti reflection material for clear visibility. the gauges is suitable for open w heel set only. supplied in nicely wooden strong and transportation box with carrying handle specification m easuring ranges 800 to 1010 mm, measuring accuracy +0.1 mm, least count 0.1mm, make-pie, bpi tesa or any other reputed make along with 1)calibrated certificate from approved laboratory. 2) supplier must hav e successfully supplied any type wheel gauge to any depot of indian railways, offer will be passed on, if doc uments for successful supply not made available. ( warranty period : up to 30 months from the date of sup ply) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41201541

14 Aug, 2025 NA

Bikaner - Rajasthan

Tender For supply of wheel diameter gauge and specification- measuring accuracy*: +-0.2 mm (for tread with s urface finish n7/n8 or better) & +- 1.5 mm (for tread with surface finish n 10 to n11), least count: 0.1 m m, applicability: b.g. wheels (solid & some tyred)., measuring range: 660 - 1150 mm., diameter reading: directly displayed on lcd display (no tables required), weight: 1250 gms. (approx). make/model: wd-3 (e ) or equivalent. [ warranty period: 30 months after the date of delivery ]

Milliammeter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector