Tender For purchase of mini lorry for public health use in p.n.patty town panchayat - a hopper tipper dumper is a truck designed for carryingmaterial, which may be garbage, construction material,mining minerals and any other loose material. the truck isfi tted with specially designed hydraulic tipping mechanismdriven by pto or power pack, which enables the dumper(rear portion expect the driver cage) to move up and downfor unloading of the material. it is the safest way to quicklytransport loose materials from one site to another., generic parametersvehicle category, generic parametersvehicle category, vehicle engine cubic capacity (cc), type of fuel, vehicle emission compliance, number of cylinder in engine (nos), vehicle mileage (declared by oem as certified by test agencyunder rule 115 of cmvr 1989) (kmpl), gradeability of vehicle (degree in first gear), maximum engine power range (in kw), max engine power (kw@rpm), max engine torque (nm@rpm), fuel tank capacity (liter), category of vehicle for which chassis to be used, overall length of vehicle (mm), overall width of vehicle (mm), overall height of vehicle (mm), ground clearance (mm), minimum wheel base (mm), type of tyre and tube (for both front and rear), front vehicle brake, rear vehicle brake, vehicle transmission system, type of steering, turning radius (mm), nos of forward gears, vehicle air intake system, type of clutch, axle configuration, front axle suspension system, rear axle suspension system, air conditioning, standard spare wheel and tool kit, warranty period, battery warranty (month), number of free service (nos), fabrication description, type of tipper, define type of tipper, tipping angle (degree), hopper tipper dumper container capacity/volume (cubicmetres), tipper body pivot length (mm), tipper body length (mm), tipper body height (mm), overall height of tipper from ground (mm), dumping height (mm), body plate thickness (mm), tipper sub frame thickness (mm), hydraulic system, tipping hydraulic cylinders(make), hydraulic system driven by, tipper container material, engine oil pressure level indicator in control panel, fuel gauge indicator in control panel, engine cooling liquid temperature indicator in control panel, operating hour meter, locking/unlocking of tipper discharge container, lowering/lifting of tipper discharge container, counter weight, insurance charges, temporary registration charges & permanent registration charges
Tender For corrigendum : supply of power distribution unit , 6/16a , snap fit socket-06 nos , rocker sw with red indicator light-06 nos , horizontal , 19 inch mount , power distribution unit , 6/16a , snap fit socket-12 nos , rocker sw with red indicator light-12 nos , horizontal , 19 inch mount , fan , 230v ac , 120x120x38 mm , 2800-3200 rpm , 80-120 cfm , rack mount type , copper bus bar , electrolytic tough pitch , tin plated , 1642x3x25 mm , 20 no of holes , m6 at 70mm pitch , conical insulator , ht 30mm , top dia 25mm , btm dia 30mm , depth 7mm , body mat-dmc , insert mat-al/brass/steel zinc pasv
Tender For corrigendum : supply of w90311941141 oil module unit as per document no. 4-11939-j3500 size: l2 , w99311941638 pressure relief valve of jacking oil system (l2-module) kks tag: mav35aa151 set pressur , w99311939854 complete assembly of main oil pump without motor with compl ete coupling (design q= 69 , w99311939463 complete assembly of emergency oil pump with dc motor for l2 oil module , w99311939447 complete assembly of lifting oil pump with ac motor size: t7e 050 , w99311941646 following spares for 3way temp erature control valve for l2 module: 1. valve trim (incl , w99311941620 oil throttle valve in lube oil header for l2-module kks tag: mav21aa251 size: l2 , w99318137273 bearings of ac motor for lube oil centrifugal pump for oil module-l2 , w99318137338 bearings for ac motor of lifting oil pump for oil module-l2 , w99318137532 bearings for ac motor for oil mist seperator (oil vapour exhauster) of oil module-l2 , w99318137265 ac motor for lube oil centri- fugal pump of oil module-l2 (147.2 kw, 3000 rpm) , w99318137320 ac motor for lifting oil pump for oil module -l2 (82.8 kw, 1500rpm) , w99318137516 ac motor for oil mist seperator( oil vapour exhauster) of oil module-l2 , w99318137400 carbon brushes for dc motor of emergency oil pump for oil module-l2 , w99318137486 carbon brushes for dc motor for lifting oil pump of oil module , w99318137419 brush assembly for dc motor for emergency oil pump of oil module-l2 , w99318137494 brush assembly for dc motor for lifting oil pump of oil module , w99318137389 dc motor for emergency oil pump for oil module-l2 (28.2 kw) , w99318137575 dc motor for lifting oil pump of oil module , w99318137397 bearings for dc motor of emergency oil pump of oil module-l2 , w99318137478 bearings for dc motor for lifting oil pump of oil module , w99318137052 pressure transmitter for oil module, range 0-250 bar , w99318137060 pressure transmitter for oil module, range 0-6 bar , w99318137079 pressure transmitters for oil module, range 0-(-15) mbar , w99318137087 level transmitters for oil module l2, range (850-1750) mm , w99318137192 pressure switch for oil module, range- (0.5-10) bar , w99318137206 differential pressure switch for oil module, (0-4.2) bar , w99318137214 differential pressure switch for oil module, (0-1.2) bar , w99318137125 rtd for oil module, range- (0-100) degc , w99318137095 level indicators for oil module l2, range-(850-1750) mm , w99318137150 pressure gauges for oil module, range- (0-10) bar , w99318137168 pressure gauges for oil module, range-(0-400) bar , w99318137176 pressure gauges for oil module, range-[ (-) 60-0] mbar , w99318137184 pressure gauges for oil module range -[ (-) 160-0] mbar , w99318137141 temperature indicator for oil module, range- (0- 100) degc , w99318137915 pressure transmitter for oil module, range 0-10 bar , commissioning spares as per document no. 4-11939-om013 rev 01 (one set of commissioning spares shoul , lump sum per man day charges at site, including every expense at our site i. e. boarding & lodging, l , lump sum per visit charges (to&fro) including travelling time & all expenses up to our project site
Tender For procurement of lab instruments for chemical lab of ogcd, dtps, htps, kasimpur - sension5 portable conductivity meter specification range:#conductivity s/cm 0 to 19.99; 200 to 1999#conductivity ms/cm 2 to 19.99; 20 to 199.9#tds: 0 to 50,000 mg/l as nacl salinity: 0 to 42 g/l (ppt)#temperature: -10.0 to 105.0 c#resolution:#conductivity 0.01; 1.0#conductivity ms/cm 0.01; 0.1#tds: 0 .00-199.9 mg/l 0.1mg/l 2 00-1999 mg/l 1 mg/l 2 .00 -19.99 g/l 0.01 g/l 2 0-50 g/l 0.1g/l #salinity: 0.1 g/l (ppt)#temperature: 0.1 c#accuracy:#conductivity: 0.5% in the first 3 ranges, 1% at highest range #td of full scale #salinity: 0.1 ppt (-2 to 35 c) #temperature: 0.1 c# , make-hach, ph meter probe (ph meter sension ph3) cat no-lzw5010t.92.0002 make hachdetails in photograph enclosed in tender document, manual sieves shaker (with sieves set - mesh size-50,+100,+200) any standard make details in photograph enclosed in tender document, centrifugal machine for oil testing, any standard maketube capacity:no.12-24:size 15 mlshould have a digital timerbody should be made of strong fabricated & corrosion resistant steel.control panel- for start/stop switch, dynamic brakes, step less speed regulator with zero start switch & speed indicator with timer and protective fuses.door interlock.maintenance free brushless drive motor with exact speed preselection and display. speed range 100 to3000 rpm and above, accuracy 1 rpm. details in photograph enclosed in tender document, orset appratus (complete set), any standard make details in photograph enclosed in tender document, ph 2700 ph meter specification #ph range -2.000 to 20.000 ph #resolution 0.1 / 0.01 / 0.001 ph #accuracy 0.002 ph + 1 lsd #cal. points up to 6 preset or 5 custom #buffer sets usa, nist, din, user 1, user 2, custom #or range 2000.0 mv #rel. mv range 2000.0 mv on 0.1 mv# accuracy 0.2 mv #temperature,range (meter) 0.0 to 100.0 c / 32.0 to 212.0 f #resolution 0.1 c / 0.1 f #accuracy 0.3 c / 0.5 f #compensation atc / mtc #power requirements 9 v dc adapter, 1.3 a (100/240 vac, smps)# make- eutech
Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230a15 volts a/c), stirring capacity: 50-1500 rpm, capacity of stirrer: 2 litre, plate size: 18.4x18.4 cm(approx.), make & model: branded, bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is stan
Tender For supply of spare parts for prd 750 drilling unit - tower light amber as per specifications and part number in the annexure , breather as per specifications and part number in the annexure , air breather as per specifications and part number in the annexure , safe spiral for hose as per specifications and part number in the annexure , safe spiral for hose as per specifications and part number in the annexure , cylinder as per specifications and part number in the annexure , piston cup as per specifications and part number in the annexure , valve cover as per specifications and part number in the annexure , sansel rpm sensor without sensor as per specifications and part number in the annexure , sensor as per specifications and part number in the annexure , grease nipple m10 as per specifications and part number in the annexure , grease nipple m8 as per specifications and part number in the annexure , cam follwer bearing as per specifications and part number in the annexure , hose as per specifications and part number in the annexure , fuel display indicator as per specifications and part number in the annexure , fuel sensor as per specifications and part number in the annexure , digital temperature controller as per specifications and part number in the annexure , thermocouple as per specifications and part number in the annexure , hour meter as per specifications and part number in the annexure , magnetic pick up as per specifications and part number in the annexure , suction strainer as per specifications and part number in the annexure , filter element as per specifications and part number in the annexure , 6 mtr throttle lever assy as per specifications and part number in the annexure , bronze plate as per specifications and part number in the annexure , hyd piston pump_variable as per specifications and part number in the annexure , l nylon as per specifications and part number in the annexure , valve ball as per specifications and part number in the annexure , valve seat as per specifications and part number in the annexure