Get complete information related to latest Mixer Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Mixer Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Mixer Scrap Tenders.
Tender For supply of supply of ms keltron make actual value pcb, us-2710av1a for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs. , supply of ms keltron make buffer pcb aw 205 800 238 for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make bypass controller pcb un712 for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make charger regulator pcb un710b for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of harmonic capacitor 36mfd 415v ac 1-phase for 1.5 kva inverter , supply of ms keltron make inverter logic pcb un700 for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make inverter regulator pcb un-0713a for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make inverter transistor base drive pcb uns-3706 for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make mother board uns 3704 for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make parallel operation pcb un720 for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make power supply pcb un0974 for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make remote alarm pcb un0702a for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of transistor 2d1 150 m-050 dual pack- with freewheeling diode on heat sink trg- 21 for 1.5 kva inverter. , supply of dc spike protection capacitor 0.47 mfd and 1200 v, type no. 940c12p4k, cdet for modification , pcb installation and testing charge for unit-3and4 at site
Tender For bid to ras supply of without shelf 2 nos. drawer , without shelf 1 nos. drawer , blind frame , frame , frame for sink , with shelf unit upper glass shutter , extra hardware item
Tender For supply of cast copper alloy screw down bib taps and stop valves for water services as per is 781 (q3) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , sinks (q3) , towel rail / ring for bathroom (q3) , particle board prelaminated 8 ft by 4 ft by 12 mm , ply wood 8 ft by 4 ft by 6mm 5 ply , ply wood one side teak face size 8 ft by 4 ft by 4mm , particle board prelaminated 8 ft by 4 ft by 18 or 19 mm , pillar cock fancy type 15 mm cp , wire mesh gi 0point56 by 1 point 8 by 15 mtr length , hacksaw blade 15 by 300 mm , seat cover plastic for ewc white colour , hydraulic door closer , pvc adhesive tape 25 mm , flushing cistern pvc low level 10 ltr capacity , tubing gi med gde 20 mm , stop cock brass concealed 15 mm , ply wood 8 ft by 4 ft by 3mm 3 ply , nipple gi 15mm by 150mm long , sheet glass pane 5mm thick , gun metal gate valve lead tin bronze brass 15 mm , bathroom cabinet pvc , waste pipe 32 mm pvc dia for whb , mirror looking 16 inch by 12 inch with pvc frame , kitchen rack ss 24 inch by 24 inch by 10 inch , shower rose cp 15 mm , centre hole mixer cp 15 mm , stop cock pvc fancy type 15 mm , wash hand basin 500 by 400 mm , toilet paper holder cp , float valve 15 mm with ball , float valve 20 mm with ball , towel rail 900 mm long cp , ewc p trap , plug gi 15 mm , mirror looking 24 inch by 18 inch with pvc frame , handle for almirah medium steel 100 mm cp , sliding door bolt alu 300mm with nut and bolt , tubing gi med gde 15 mm , shower rose pvc 15 mm , lock for almirah steel , wc indian type 580 mm , nipple gi 15mm by 50 mm long , glass shelve diplomat cp 450 mm , sliding door bolt alu 200 mm , stop cock brass 15 mm , sliding door bolt alu 250mm , curtain rod stainless steel 15 to 20 mm , helicol door spring 300mm length , tower bolt alu 100 mm , wash hand basin 630 by 450mm , sliding door bolt ms 250mm with nut and bolt , p trap wc , cover for storage tank 500 or 1000 ltr , waste coupling 32 or 40 mm cp , butt hinges ms 100mm , wire netting 16 mesh 24 swg fly proof 15 mtr roll , urinal pipe pvc 80 or 100cm long , helicol door spring 150mm length , gi elbow 15 mm , bend gi 15 mm , door handle aluminium 100 mm , socket gi 15 mm , union socket 15mm , union socket g i 20mm , pvc adhesive tape 20 mm 6 mtr long , tee equal gi 15 mm , wash hand basin 550 by 400 mm with complete accessories , butt hinges ms 75 mm , shower rose cp 100 mm dia round type , gun metal gate valve lead tin bronze brass 25 mm , bib cock brass fancy type 15mm , glass putty , door stopper brass , bow handle aluminium 150 mm , helicol door spring 125mm length , cement white , cement in hdpe bags of 50 kgs each 43 gde opc , connection pipe pvc size 15mm dia 300mm long with 2 nos coupling , door stopper alu , bow handle aluminium 75 mm , gi elbow 20mm , super flash strip 4 inch by 10 mtr long , m seal , tower bolt alu 75 mm , nipple gi 15mm by 80 mm long , tee reducing 15 by 25 mm , thinner , hasp and stapple alu 100 mm , tee gi reducing 15 by 20 mm , painting brush 100 mm , butt hinges ms 125mm , hasp and stapple alu 125 mm , nipple gi 15 mm by 100mm long , hasp and stapple alu 75 mm , butt hinges ms 50mm , wc s trap european , kitchen sink 24 inch by 16 inch by 8 inch stainless steel , putty black , switch fuse unit 200a 4 p 415v , door stopper double brass , speed breaker 500mm , pvc door seal 900mm , knob for cupbord 40mm , cpvc pipe 15mm , cpvc pipe 20mm , elephant shield liquid rubber , angle cock 15mm cp , pillar cock 15mm , cp sink mixer 15mm , cp whb mixer 15mm , wall mixer with hand shower cp , nipple extension cp 15mm long , pvc pipe swr 75mm , pvc pipe swr 100mm , pvc bend 75mm , pvc socket 75mm , pvc tee 75mm , cp end bracket corner 20mm , water proofing epoxy rexin , cp female for curtain rod , brass door handle boe type 100mm , cp grating with hole 125 mm , cp grating with hole 100 mm , cp grating with out hole 125 mm , cp grating with out hole 100 mm , cp health faucet 15mm , pvc soap dish 120mm ,
Tender For supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial knife sterilize
Tender For bid to ras supply of frame for sink , l corner unit with shelf , without shelf drawers 2 nos , without shelf drawer 1 nos , frame , with shelf unit upper glassshutter , extra hardware item
Tender For bid to ras providing of up-gradtion under renovation of modular ot at atc - hermitically sealed door( repair) , hermitically sealed door ( repair) , surgeon control panel ( replacement) , hatch box ( repair) , x-ray viewing screen ( repair) , anti-static flooring (replacement with long sheet) , pressure relief damper p r d ( repair) , scrub sink unit (repair) , ots peripheral led lights (replacement) , single arm ceiling pendent ( repair) , laminar air flow with replacement of hepa & diffuser & repair , prefabricated walls and ceiling panels for antibacterial paint and primer , ot light (replacement) , integration & fixing of interactive panel in conference roomas per specs & scope of work enclosed , electrical distribution panel (repair) , storage unit (repair) , other misc. job works in modular ots. complete in all aspect , cmc for hermitically sealed door , cmc for hermitically sealed door , cmc for surgeon control panel , cmc for hatch box , cmc for x-ray viewing screen , cmc for anti-static flooring , cmc for pressure relief damper p r d , cmc for scrub sink unit , cmc for ots peripheral led lights , cmc for single arm ceiling pendent , cmc for laminar air flow with hepa & diffuser cloth , cmc for prefabricated walls and ceiling panels for antibacterial paint and primer , comprehensive cmc of ot light along withall allied items and their integration, interactive panel in conference room as per specs & scope of work enclosed , cmc for electrical distribution panel
Tender For supply of work table , low height single burner , s s exhaust hood , two burner range , chappatti rolling table , chappatti plate with puffer , chappatti collection table , s s tandoor , under counter refrigerator , over head shelf , four door refrigerator , mixer grinder , gravy machine , work table with sink , dough kneader machine , dosa plate , chapatti making machine , two door refrigerator , 2 door under counter freezer , dish landing table , three sink unit , wiping table , clean dish rack 5 shelves , pot rack 4 shelves , potato peeler , service counter , hot bain marie , work counter , storage rack 5 shelves , potato onion bin , s s pallet , commercial gas pipe line , g i ducting with cfm id blower , air washer unit
Tender For supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial knife sterilize