Latest mocb panel scrap Tenders | Government mocb panel scrap Tenders

CTN :40581060

04 Aug, 2025 NA

Panchkula - Haryana

Tender For bid to ras tender for supply of mpcb and mcb - motor protection circuit breaker asper iec 947 having magnetic thermal release with 1no aux contact range 2.5 - 4 amps make siemens or schnider , motor protection circuit breaker asper iec 947 having magnetic thermal release with 1no aux contact range 0.25 - 0.4 amps make siemens or schnider , motor protection circuit breaker 10-16 amps 3pole over load range 10 -16 amps 1n0 make siemens or schnider , air break contactor ac3 duty 4kw dol minimum current rating 9a aux.contacts 2no+2nc coil voltage 220v 50/60 hz along with suitable coil suppressor make siemens or schnider , air break contactor ac3 duty 5.5kw dol minimum current rating 12amps aux contacts 2no + 2nc coil voltage 220v 50/60 hz make siemens or schnider , air break contactor ac3 duty 4kw dol minimum current rating 9 a aux contact 1no coil voltage 220v 50/60 hz along with suitable coil suppressor make siemens or schnider , miniature circuit breaker as per is 8828 1966 iec 898 c type 1amp sp breaking capacity 10 ka make siemens or schnider , miniature circuit breaker asper is8828-1996 iec 898 c type 2amps sp breaking capacity 10 ka make siemens or schnider , miniature circuit breaker as per is 8228 1996 iec 898 c type 6amps sp breaking capacity 10 ka make siemens or schnider , miniature circuit breaker as per is8828 1996 iec 898 type c 4 amps dp breaking cap 10ka make siemens or schnider , miniature circuit breaker , asper is8828 1996 iec 898 c type 6 amps dp breaking capacity 10 ka make siemens or schnider

CTN :41228018

04 Aug, 2025 11.68 Lacs

Chandigarh - Chandigarh

Tender For providing electrical supply to newly installed acs in various class of govt. model senior secondary school, school-16-d,chandigarh. - dsr item no. 2.10 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required., single pole, triple pole, dsr item no.2.5 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer) as required (note: vertical type mcb tpdb is normally used where 3 phase outlets are required)., 4 way (4 + 12) double door, dsr item no.14.16 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., 160 mm dia (od-160 mm & id-135 mm nominal), providing and fixing following rating mccb 4 pole 415 volt (thermal magnetic / microprocessor release) without ms enclosure for over load and short circuit protection, 36-55 ka breaking capacity (ics=100% icu) with positive isolation. (as per complete item no. 4 of the dnit)., 100 amp 4 pole 36 ka mccb (thermal magnetic release)., 250 amp 4 pole 36 ka mccb (thermal magnetic release)., 400 amp 4 pole 50/ 55 ka mccb (microprocessor release) with lsig protection., supply and laying of xlpe insulated pvc sheathed aluminium conductor cable of 1.1 kv grade as per is 7098 (part-i) 1988 (amended up to date) of the following sizes to be laid direct on surface with the help of m.s. clamp of suitable thickness. (as per complete item no. 5 of the dnit)., size 35 sq.mm 3.5 core xlpe al. arm. cond. cable, size 25 sq.mm 3.5 core xlpe al. arm. cond. cable, supply and laying of xlpe insulated pvc sheathed aluminum conductor cable of 1.1 kv grade as per is 7098 (part-i) 1988 (amended up to date) of the following sizes to be laid in existing rcc/hume/dwc/ metal pipe. (as per complete item no. 6 of the dnit)., size 300 sq.mm 3.5 core xlpe al. arm. cond. cable, supply, erection testing and commissioning of l.t. cubical panel indoor type with degree of protection ip 54 fabricated from 14 gms (2mm) thick crca sheet and ms flat, (as per complete item no. 7 of the dnit)., 01 no. lt panel approx. size 1150 mm x 2400 mm

CTN :41186169

02 Aug, 2025 NA

Darjeeling - West Bengal

Tender For supply of resistor , circuit breaker , electro magnetic valve , accelerator cable , radiator hose , door handle , luggage box lock , pinion

Central Government/Public Sector

CTN :40611509

29 Jul, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of 12kv, 2000a magnetic actuator based vacuum circuit breaker

State Government

CTN :40897481

28 Jul, 2025 NA

Amravati - Maharashtra

Tender For corrigendum : supply of various types of electrical materials - insulation tape roll (6 meter), steelgrip, nippon, anchor, supplying miniature circuit breaker of single pole breaker (confirming to is:8828) of 32 a c series) (note:- make with the lowest rate will be approved), havells, datar, legrand, c&s electric, supplying miniature circuit breaker of single pole breaker (confirming to is:8828) of 32 a b series) (note:- make with the lowest rate will be approved), havells, datar, legrand, c&s electric, supplying of four pole isolators / only switch version of miniature circuit breaker of 63 amps. (note:- make with the lowest rate will be approved), havells, datar, legrand, c&s electric, supplying electronic ding dong type call bell with heavy duty coil suitable to operate on 230 v a.c. & d.c. (note:- make with the lowest rate will be approved), anchor, leader, c&s electric, havells, modular switch 6 amp 1 module (for existing maintenance replacement), anchor rider, anchor penta, modular plug 5 pin 6 amp (for existing maintenance replacement), anchor rider, anchor penta, modular switch 16 amp 1 module (for existing maintenance replacement), anchor rider, anchor penta, modular plug 6 pin 16 amp (for existing maintenance replacement), anchor rider, anchor penta, compact led 18w tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated hf electronic driver complete. (note:- make with the lowest rate will be approved), philips, bajaj, crompton, four pole mcb c 63 amp. (note:- make with the lowest rate will be approved), havells, datar, legrand, triple pole mcb c 32 amp. (note:- make with the lowest rate will be approved), havells, datar, legrand, double pole mcb c 32 amp. (note:- make with the lowest rate will be approved), havells, datar, legrand, four pole isolators 100 amp. (note:- make with the lowest rate will be approved), havells, datar, legrand, double pole isolators 40 amp. (note:- make with the lowest rate will be approved), havells, datar, legrand, industrial plug original 1.25 mm crca sheet metal enclosureswith 20a. 2 pin plug & earth socket and 20a. 3 pin plug top with20a/30a single pole mcb complete erected on angle iron/ g.i. frame (note:- make with the lowest rate will be approved), havells, datar, legrand, copper cable 2 core wire 0.5 sqmm 90 meter (note:- make with the lowest rate will be approved), finolex, rr kabel, polycab, square led panel light 18 to 20 w. (slim edge-lit) provision for plain front frame with translucent cover fix to the housing complete. (note:- make with the lowest rate will be approved), philips, bajaj, crompton, led square / circular 9 to 12w down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete (note:- make with the lowest rate will be approved), philips, bajaj, crompton, led street light fitting suitable for above 40w to 48w lamp, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete (note:- make with the lowest rate will be approved), philips, bajaj, crompton, devalite, supplying ready to use retrofit t8 led 18 / 20 tube light with polycarbonate body, heat sink, integrated hf electronic driver complete & compatible to t8 / t12 led luminaire by disconnecting starter & ballast if necessary (for existing maintenance replacement), crompton, supplying decorative pre-wired box type fitting/batten suitable for 4 feet, t8 led tube light (excluding tube light). (for existing maintenance replacement), crompton, 3 pole mccb of 400a, 415v capacity with short circuit rating 36 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ uv/ trip alarm contact and mccb should have phase barriers both sides (note:- make with the lowest rate will be appr

Central Government And Public Sector

CTN :40918264

28 Jul, 2025 NA

Bongaigaon - Assam

Tender For supply of air circuit breaker(acb) for dg set application of system , voltage-750 v , capacity-800amp , breaking capacity - 50ka , frequency- 50 hz, 3 pole mf( with inbuilt uv protection , thermal ,magnetic re lease and 6 no+ 6 nc aux contact block) similar to l&t make acb type : cn-cs 800cconforming to rcf s pecification no : edts 103 , rev-d , am-07 or latest, make- l&t, abb or equivalent in all respect. note: ma terial should be supplied by oem or their authorized dealers only. [ warranty period: 30 months after the date of delivery ]

Mocb Panel Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government And Public Sector