Get complete information related to latest Modular Structure Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Modular Structure Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Modular Structure Tenders.
Tender For design, supply, construct, erection and commissioning of modularstructure through 3d monolithic precast technology for awcs (anganwadi centers) at various locations in the gujarat state at ahmedabad,anand,kheda,aravalli & sabarkantha districts.( phase-2, package-1)
Tender For supply of design, manufacturing, supply of dg set of 500 kva rating for site conditions as per annexure 1 , supply of emergency switch board as per annexure - 2 , supply of lighting distribution board and power distribution board as per annexure - 3. , supply and installation of led lights , supply of structural steel - ms equal angles, isa 50 x 6mm , ms plate-3.15 mm of either tata steel, jindal steel, rinl, sail make only. supply of gi pipes etc , charges towards installation and commissioning of dg set as per the scope of work attached. , supply and installation of auto changeover switch as per the scope of work attached herewith. , fabrication of structural steel along with painting the structures as per scope of work , shifting of cables from central stores and laying of cables over cable trays and binding the cables on the cable trays with cable tie as per scope of work , shifting of amf panels, esb,ldb and pdb panels and its accessories as per the scope of work
Tender For corrigendum : annual rate contract tender for fabrication, dismantling & erection of various steel structural work at lignite, limestone and ash handling system of gipcl-slpp year 2025-26
Tender For supply of materials for construction in gram panchayat bagsara athuna (for mgnrega verius ,plans on bsr 2025-26. f.y. 2025-26-, diesel road roar 8 to 10 tonne, , sheep foot roller, , truck 9 tonne, , tractor (25.40 hp), , tractor trolley, , tractor water tanker capacity 4000 litres water, , cement concrete mixer 57 pan foot, , pumping set 15 h.p., , niddle/plate vibrator with operator, , camel cart/bullock cart with driver, , grinding machine with operator (large motor driven), , compressor, , hydraulic excavater/jcb (bucket capacity 0.4cum), , dumper, , scraper, , shuttering of wooden planks with poles and other materials to be installed on tpsite and removed after the stipulated period, , shuttering of ply with poles and other materials to be installed on tpsite and removed after the stipulated period, , shuttering of iron plate with poles and other materials installed on tps site and removed after a specified period, , water and pumping material (filling), , grinding machine (small operator, hand operated), , padla/kankar/jhajra, , mortar-soil/mud-masala, , lime from brick kiln for roasted masonry work, cement, ppc, white cement, fine aggregate, sand/bajri, gravel local, fly ash, surkhi, stone dust in masonry work, gitti of stone/brick (for other than road work), 40mm measured stone (hand broken grit) (boids cut 1/11), 40mm grit of stone (broken by crusher) (boids cut 1/11), 20mm chit of stone (broken by crusher), 12/10/6mm chit of stone (broken by crusher), brick clay, material for machining work (5 km, including lead), 6340mm stone crushed stone (boids cut 1/11), 63.40mm stone crushed stone (boids cut 1/11) cut 1/11), 9045 mm, hand broken stone aggregate (boids cut 1/11), quarry ravinsh. boids cut 1/6), graven (voids cut 1/6), puncture (boids cut 1/6), (22.5 x 11 x 7.50 cm), pacham peni (1st class), dinesh cheni (ii class), bhonima masonry stone, vinai nerada (rr), nimai gada (cr), baja gaalim upto 15cm height for purge work), paraja monim (23cm height for gadak/gharanja work), jodhpuri rai stone strip dhap shovel pieces (mumbai 2-3. thickness 10-12", thickness 2.5-3.5"), flaky material (3-4" thick & length and width 1-, 2), minister (dpc, sill, coping, lintel, tand, almirha etc), upto 25mm thickness, upto 21-40mm thickness, upto 40-50mm thickness, upto 50-75mm thickness, upto 75-100mm thickness, upto 100-150mm thickness, parn / patti patan katja stone, ? , 001 to 2300 cm, , more than 200 sq. cm, marble powder, marble stone (gajnagar ii quality/local 20mm thick., 000 sq. cm, 901 to 2300 burn cm and, more than 2300 perm, stone frame, single patam size 100 x 75 mm,, either patam size 125 x 75 mm., stone strips, up to 1.5 m length, minimum 40mm thick, 1.5 m to 2.40 m length, minimum 50mm thick, 2.4m to 3.0 m length, minimum 65mm thick, above 3.0 m length, minimum 75mm thick, precast tiles/blocks, glazed size-30x45 cm, mosaic size 40mm thick, vitrified size-60x60 cm, interlock tiles/brick/block for road work, cement interlocking block m-30grade, 60mm thick, cement interlocking block m-30grade, 80mm thick, cement interlocking block m-30grade, 100mm thick, fr pvg insulated copper conductor single core cable 151 marked, 1.50 sq.mm, -, , 4.00 sq.mm, 6.00 sq.mm, 0.50 sq.mm, 1.00 sq.mm, local wood with fittings (for doors, doors and fences.) fire, acacia, others, factory made doors (30mm thick solid core single pane., structural steel, +, iron (door steel fe 415/500 for reinforcement), winding wire 18 gauge, iron girders, conia iron pokor bar/patti/angle iron, barbed iron wire (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, mesh, iron mesh (24 gauge, mesh), cement concrete mesh akash patal 40mm thick, 3mm thick glass, paint, enamel paint, distorter (water bound), lime for painting (aras/kali), primer (for iron/wood), petroleum products, diesel hsd, mobil oil, , hand wash-basin 450*300mm with cupintv p.v. m. vent pipe, stone bar (5.w.) pipe 100 m.m. diameter, 0.6 m. long, m. p. pillar cock (dia
Tender For material supply for the year 2025-26 for execution of works sanctioned under various schemes of mahatma gandhi nrega, rural development and panchayati raj department-, 2, diesel road roller 8 to 10 ton, sheep foot roller, truck 9 tom, tractor (25.40 hp), tractor trolley, tractor water tanker capacity 4000 liter water, cement concrete mixer 57 pan foot, pumping set 15 ab. p., niddle/plate biver with operator, camel gahhi/velbhadi with driver, grinding machine with operator (b-motor operated), compressor, hydraulic excavater/jcb (bucket capacity 0.4cum), imper, scraper, shuttering wooden planks with beams and other materials to be removed after the prescribed period of time, nuttering ply with beams and other materials to be removed after the prescribed period of time, shuttering iron plates with beams and other materials to be removed after the prescribed period of time, nani and pumpable (bhagai), grinding machine with operator (small, hand operated), padla/kankar/jhalra, mortar-soil/mud masala, lime from kali kiln for masonry work, , mement, p.p.c., white cement, fine aggregate, sand/gravel, gravel local, fly ash, surkhi, stone dust in masonry work, grit of stone brick (for other than road work), 40mm measured stone (hand broken grit) (cut balls 1/11), stone chips (broken with saffron) (cut balls 1/11), 20mm stone grit (broken with saffron), 12/10/6mm stone chips (broken with saffron), brick chips, material for machining work (5 km, including lead), 6340mm stone crushed stone chips in crusher (cut balls 1/11), 63.40mm stone crushed stone chips in hand (cut balls 1/11), 9045 mm. hand broken stone rohi (boids cut 1/11), fery ravish (boids cut 1/6), weight (boids cut 1/6), car (voids cut 1/6), +, , (22.5 x 11 x 7.50 cm), 1st class (1 st class), 2nd class (class), monig / baranja / masonry stone, masonry berda (rr), masonry radda (cr), gharanja monig (for perch work upto 15cm height), gharanja molig (for road/kharanja work upto 23cm height), -jodhpuri type stone strip / chash katal pieces (length 2-3', width 10-12", thickness 2.5-3.5"), stone theep (flaky material) (3-4" thick & length and width 1-2"), sandstrein (dpcl, coping, lintel, tand almirha etc), upto 25mm thickness, 0.2, upto 25-40mm thickness, 10.3, upto 40-50mm thickness, 10.4, upto 50-75mm thickness, 10.5, upto 75-100mm thickness, 10.6, 11, upto 100-150mm thickness, 11.1, floor patina fatma stone, floor tiles upto 35mm thick, min. 3 sqft or more area, 11.2, color for strip coating 80-75mm thickness min. 3 sqft or more area, 11.3, rough kota stone without polish, 1.3.1, upto 500 sq.m., 1.3.2, 41 to 2300 sq.m., 1.3.3, more than 2300 sq.m., 11.4, polished kota stone (one side polished), 11.4.1, 900 sq.m., 11.4.2, 101 to 2300 sq.m., 11.4.3, 0, more than 2300 sq.m., 0.1, , upto 900 sq.m., upto 2300 sq.m. in 50%, more than 2300 sq.m., marble chips, marble powder, marble stone (rajnagar ii quality/local 20mm thick), +, upto 700 sq.m., 901 to upto 2300 sq. cm, more than 2300 sq. cm, stone frame, echal paitaam size 100 x 75 mm., echal mainam size 125 x 75 mm., stone strips, up to 1.5 m length, minimum 40mm thick, 1.5 m to 2.40 m length, minimum 50mm thick, 2.4m to 3.0 m length, minimum 65mm thick, above 3.0 m length, minimum 75mm thick, precast tiles/blacks, glazed size-30x45 cm, mosaic size-40mm thick, vitrified size-60x60 cm, interlock tiles/brick/block for road work, cement interlocking block m-30grade, 60mm thick, cement interlocking block m-30grade, 80mm thick, cement interlocking block m-30grade, 100mm thick", fr pvmi immunated copper conductor single core coil isi marked, 1.50 sq. m,, 1, , 4.00 sq mm, 6.00 sq mm, 0.50 sq mm, 1.00 sq mm, local wood with fittings (for doors, windows and furniture), mango, acacia, others, factory made doors (30 mm thick, solid single panel), structural steel, iron (tor metal fe 415/500 for reinforcement), binding wire 18 mesh, iron girders, conical iron/square bar/patti/angle iron, barbed iron wire (size 12 gauge wire and 12 gauge stra
Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka jhalod dist dahod under taluka panchayat, jhalod dist dahod under mgnrega (annual unit rate)-, , brick aggregate (single size):40 mm nominal size , stone aggregate(single size):63 mm nominal size , stone aggregate(single size):50 mm nominal size , stone aggregate(single size): 40 mm nominal size , stone aggregate(single size):20 mm nominal size , stone aggregate(single size): 10 mm nominal size , stone aggregate(single size): 06 mm nominal size , safeda ballies 125 mm diameter , paving bitumen of grade vg 10 of approved quality , bitumen grade pmb - 40 , premoulded joing filler 12 mm thick , coal tar , blasting powder , brick bats , wire brush , soft brush , portland cement , white cement , coal (steam) , brass handles 125 mm with plate 175x32 mm , brass handles 100 mm with plate 150x32 mm mm , brass door latch 300x16x5x mm (0.380 kg) , brass door latch 250x16x5 mm (0.350 kg) , brass screws 20 mm , nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide , , cement concrete jali 50 mm thick , cement concrete jali 40 mm thick , cement concrete jali 25 mm thick , kerosene oil , unslaked lime , marble dust/ powder , acrylic distemper ist quality, having voc content less than 50 gm/litre , exterior primer , moorum , dry distemper , oil bound washable distemper/ acrylic distemper , linseed oil (double boiled) , distemper primer , acid proof paint (chocolate or black) , anticorrosive bituminous paint (black) , black japan , enamel paint , plastic emulsion paint , water proofing cement paint , ordinary varnish , superior copal varnish , superior spar varnish , black colour dark shade pigment , rolling shutter made of 80x1.25 mm machine rolled laths , coarse sand (zone iii) , fine sand (zone iv) , galvanised steel plain sheets , mild steel round bar 12 mm dia and below , mild steel round bar above 12 mm dia , , twisted steel/deformed bars , mild steel square bars , structural steel such as tees, angles, channels and r.s. joists , flats up to 10 mm in thickness , flats exceeding 10 mm in thickness , mild steel plates , mild steel hooks , mild steel rivets , galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots , galvanised steel j or l hooks 8 mm dia , galvanished steel barbed wire , stone for masonry work , stone for pitching 15 cm x 22.5 cm , stone dust , precast terrazzo tiles 22 mm thick (light shade) , precast terrazzo tiles 22 mm thick (dark shade) , g.i limpet washer , bitumen washer , g.i. plain washer thick , water proofing materials , wire mesh (rabbit) , chequered terrazzo tiles 22 mm thick (light shade) , chequered terrazzo tiles 22 mm thick (dark shade) , diesel oil , 18 mm thick flamed finish granite stone slab , brass bib-cock-15 mm dia , brass stop-cock 15 mm dia , c.i. cover and frame 300x300 mm inside , c.i. grating 100x100 mm , , twisted steel/deformed bars , mild steel square bars , structural steel such as tees, angles, channels and r.s. joists , flats up to 10 mm in thickness , flats exceeding 10 mm in thickness , mild steel plates , mild steel hooks , mild steel rivets , galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots , galvanised steel j or l hooks 8 mm dia , galvanished steel barbed wire , stone for masonry work , stone for pitching 15 cm , 22.5 cm , stone dust , precast terrazzo tiles 22 mm thick (light shade) , precast terrazzo tiles 22 mm thick (dark shade) , g.i limpet washer , bitumen washer , g.i. plain washer thick , water proofing materials , wire mesh (rabbit) , chequered terrazzo tiles 22 mm thick (light shade) , chequered terrazzo tiles 22 mm thick (dark shade) , diesel oil , 18 mm thick flamed finish granite stone slab , brass bib-cock-15 mm dia , brass stop-cock 15 mm dia , c.i. cover and frame 300x300 mm inside , c.i. grating 100x100 mm , s.c.i. gully or nahani grating 100 mm dia , vitreous china pedestal
Tender For fabrication and erection of various piping work including associated supporting structural steel works for residual utilities and offsite facilities for mw-i part-a rajasthan refinery project of hrrl at pachpadra barmer