Web Analytics Made Easy - StatCounter

Motor Control Centre Panel Tenders

Get complete information related to latest Motor Control Centre Panel Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Motor Control Centre Panel Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Motor Control Centre Panel Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :44815771 Due date: 22 Apr, 202622 Apr, 2026 NA
Tender For corrigendum : auction sale of depot miscellaneous scrap - 98414501]scrap condemned released and un-serviceable ac electrical scrap such as rmpu unit with condenser coil, evaporator coil and ac control panel complete set on as is where condition available under the custody cdms 07 ward ap. loc: bin no.1103 beside weigh bridge ref ds8 no-062042-23-05301 dtd 26-12-2023 note. the successful bidder should produce at least once during the currency of the original pcb certificate on the basis of which the depot officer will certify the xerox copy and keep in record for further action. this should be done before making first delivery. the successful bidder should also submit the relevant documents as per the extant rules at the time of taking delivery for verification of originals. if the purchaser fails to comply with this, emd will be forfeited.

Central Government/Public Sector

CTN :44820325 Due date: 21 Apr, 202621 Apr, 2026 NA
Tender For corrigendum : 5 hp bore well submersible pump set suitable for 4" bore well capable to delivery cold unfiltered water (head range 55-150mts, discharge range 4000-10000 lph) complete with water lubricated and suitable to operate on 415volts, 50hz ac three phase supply conforming to is:8034/2002 or latest with full automatic starter control panel along with, single phase preventer with phase reversal sensing and dry run relay protection (current sensing type), voltmeter digital or analog (range of 0 to 500v), ammeter digital or analog (range of 0a to 40a), r,y,b indications lamps, on/off switch /push button and auto/manual mode switch. authorised dealer certificate to be submitted along with offer. test certificate, warranty certificate of the starter along with supply of material. pump make: ksb, kriloskar, deccan, texmo, cg and cri1 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44820591 Due date: 22 Apr, 202622 Apr, 2026 NA
Tender For corrigendum : bore well submersible pump 5 hp submersible pumps 5hp submersible pumpset suitable for 4" borewell capable to delivery cold unfiltered water (head range 55-150 mts, discharge range 4000-10000 lph)complete with water lubricanted and suitable to operate on 415volts,50hz ac three phase supply conforming to is:8034/2002 or latestwith full automatic starter control panel along with, single phase preventer with phase reversal sensing and dry run relay protection ( current sensing type), voltmeter digital or analog (range of 0 to 500v), ammeter digital or analog ( range of 0ato40a), r,y,b indications lamps,on/off switch /push button and auto/manual mode switch. authorised dealer certificate to be submitted along with offer. test certificate, warranty certificate and user manualwith drawing circuit of the starter along with supply of material .pump make : ksb/kriloskar/deccan/texmo/cg/cri or similar ,starter make : c&s/l&t/siemens/abb/bch/powerpro or similar. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44539772 Due date: 24 Apr, 202624 Apr, 2026 NA
Tender For corrigendum : supply of various types lighting material for emd-iii-common, colony electrical maint. & electrical fuel section at gsecl ukai tps. (emd-iii (common) et-6227) - industrial exhaust fan 1 phase 230 v, size: 305 mm,900 rpm suitable for heavy duty having minimum sound, ring mounted to give maximum volume under free air flow., cg make,bracket type wall mounted fan,230volt,ac,50hz,sweep-450mm( 18 inch ),oscillating & tilting type, industrial wall mounted fan 1ph, pedestal fan, size 450mm (18-inch) ,rpm-1440,1-phase,3-speed, 230 volt,100 watt with regulator., heavy duty industrial pedestal fan with regulator, 1-phase,230 v ac, sweep: 450 mm, totally metal body., industrial wall mounted fan, sweep-750 mm, voltage - 230 v ac, 3 cx1.5 sqmm flexible copper conductor 1100 v, copper flexible wire 3 cx2.5 sqmm ,1.1 kv, flexible unsheathed pvc insulated copper cable of size 4 corex6 sqmm, 1.1kv,multi stranded anealed tinned copper,epr insulated,extruded pcp sheath flexible cable size 4cx4 sqmm, pvc twin wire 2.5mm sqr., ictpn switch 415 volts,200 amp. t.p. heavy duty., ictp switch 415 volts,100 amp. t.p. heavy duty., led tube light fixture 4 ft long 18/20 watt., mcb single pole 6 amp., elcb+mcb 32 amp,30 ma, 4-pole (3 + n) 240/415 v, 50 hz, miniature circuit breaker 3 - pole, 32 a, 415 v, rccb,240/415v ac, 63 amp, 4 pole, sens:30ma ,mounting- din rail, mcbs(3 pole+nutral) miniature circuit breker current rating 63amp., ring spanner set model 1812 taparia make, fix spanner size 6x7 mm to 30x32 mm jhalani make, tubular spanner set (8 pcs ) product no ts 08 taparia make, taparia combination plier, product no.1621-8,210 mm, crimping tools, capacity: 6 mm2 to 50 mm2., crimping tools capacity: 10 mm2 to 185 mm2., wooden lighting board with elcb+mcb, 5 pin switch socket, control fuse, flexible cable, industrial top etc as per detail specification, 2 switch + 2 plug wooden board with top sunmica, lighting panel with 18 outgoing c.k.t., supplied with double door, insulated busbar, insulated neutral bars, earth bar, cable ties, circuit identification lables, modular type 16/20 amp 1-way swich,240 volt, 5 / 6 ampere modular switch, 230 volts, 50 hz., switch socket combined 6 & 16 amp.anchor make, 6/16a uni.socket code -4191, 15 / 16 ampere modular socket, 230 volts, 50 hz., plug socket 6 amp 230v,5 hole, led lamp 9 watt, 230v, elmex terminal connector 35 sqmm type cst-35, indication led lamp 25.5 mm dia. 110v ac, 0.5w, red with lvgp, smc junction box : dimension (outside-mm) 730 x 510 x 220, dimension (inside-mm) 700 x 480 x 200, make : sintex, pvc adhesive insulation tape roll, ht tap roll, wolf make air blower, bosch make hot air gun model ghg 630 dce power input: 2000 watts, temprature range: 50-630 degree c, air flow rate: 150/300/5001/min, weight: 0.73kgs, digital multimeter, industrial exhaust fan 1 phase 230 v, size: 305 mm,900 rpm suitable for heavy duty having minimum sound, ring mounted to give maximum volume under free air flow., digital clamp meter, cg make,bracket type wall mounted fan,230volt,ac,50hz,sweep-450mm( 18 inch ),oscillating & tilting type, industrial wall mounted fan 1ph, pedestal fan, size 450mm (18-inch) ,rpm-1440,1-phase,3-speed, 230 volt,100 watt with regulator., heavy duty industrial pedestal fan with regulator, 1-phase,230 v ac, sweep: 450 mm, totally metal body., industrial wall mounted fan, sweep-750 mm, voltage - 230 v ac, 3 cx1.5 sqmm flexible copper conductor 1100 v, copper flexible wire 3 cx2.5 sqmm ,1.1 kv, flexible unsheathed pvc insulated copper cable of size 4 corex6 sqmm, 1.1kv,multi stranded anealed tinned copper,epr insulated,extruded pcp sheath flexible cable size 4cx4 sqmm, pvc twin wire 2.5mm sqr., ictpn switch 415 volts,200 amp. t.p. heavy duty., ictp switch 415 volts,100 amp. t.p. heavy duty., led tube light fixture 4 ft long 18/20 watt., mcb single pole 6 amp., elcb+mcb 32 amp,30 ma, 4-pole (3 + n) 240/415 v, 50 hz, miniature circuit breaker 3 - pole, 32 a, 415 v, rccb,240/

CTN :44808034 Due date: 20 Apr, 202620 Apr, 2026 15.00 Lacs
Tender For work of providing electrical repairing material for led lights installed in the municipal area. - providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i/is:7098 p-1 of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6%, inner / outer sheath confirming to is:5831 in existing rcc/hume/stoneware / pvc pipe/open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 1 6x 2 sq. mm. (insulated) , providing & fixing of 240/415 v ac mcb with positive isolation ka breaking capacity (b/c/d tripping characteristic as load and site requirement) 4 kv impulse withstand voltage, isi marked is 8828(1996)/conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum, energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm., conductor line load reversibility, ip 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 a rating and 10,000 upto 63 a, 5000 for 80 a & above rating including making connections, testing etc. as required. oem shall have submit nabl/cpri / erda accrediated lab type test reports & all as per pre approved by engineer in 0.5 a to 5 a ratin , double pole mcb(with b/c curve tripping characteristics) , four pole mcb (with b/c curve tripping characteristics) , supplying and fixing of aluminium (iec 60105 iso 209-1,2) / copper (iec 60028) bus bar by means of smc / dmc type insulator with standard short circuit withstand capacity, high tensile nuts and bolts spring washers in existing panel including bending, cutting in required shape and size and colour coding with heat shrinkable pvc sleeves. all as per pre approved by engineer in-charge. for additional technical parameters of products/work, refer annexure "a" attached with this bsr. , main panel street light control panel commissioning kiosk type weathe proof panel out door main cubic panel size 750x1250x500 they shall be in two section comaring as follows bsr 2017 (59.57) , supply & drawing wiring for sub mains isi marked (is:694) 110volts grade pvc insulated flat twin core sheathed solid aluminium 4 sq mm 2 core flat

CTN :44808213 Due date: 18 Apr, 202618 Apr, 2026 12.88 Lacs
Tender For providing of electricls tools & equipments - heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle , knife double bladed electrician , chisel firmer with wooden handle , , (a) crimping tool , wire cutter and stripper , hacksaw frame , tweezers , drill hand brace , plane cutters , smoothing cutters , file flat rough , file flat bastard , file rasp, half round , de soldering gun , contactor & auxiliary contacts (rm) , contactor & auxiliary contacts. (rm) , pin type, shackle type, egg typ & suspension type insulators including , hardware fitting , portable electric drill machine , load bank (lamp/heater typ , brake test arrangement with tv spring balance rating , laboratory type induction coi , series test lamp (rm) , knife switch dpdt fitted with fuse terminals (rm) , knife switch tpdt fitted with fuse terminals (rm) , miniature circuit breaker (rm , earth plate (rm) , earth electrode (rm) , elcb and rccb (rm) , fuses (rm) , rheostat (sliding type) , capacitors (rm) , various electronic components (rm) , various lamps (rm) , plug socket piano switch lamp holder (rm) , cables , twisted pair , non-metallic sheathed cable , underground feeder cable , ribbon cable , metallic sheathed cable multi- , conductor cable coaxial cable , direct-buried cable (rm) , rubber mat (rm) , electrician helmet , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials , ohm meter; series type & shunt type, portable box type , digital multi meter , a.c. voltmeter m.i. analog, portable box type housed in bakelite case , milli voltmeter centre zero analog, portable box type housed in bakelite case , ammeter mc analog, portable box type housed in bakelite case , ac ammeter mi, analog, portable box type housed in bakelite case , kilo wattmeter analog , (b) frequency meter (digital) , magnetic flux meter , tachometer , tong tester/clamp meter , megger , single phase variable auto transformer , growler , ac starters , oscilloscope dual trace , function generator , discrete component trainer , linear i.c. trainer , digital i.c. trainer , domestic appliances- , 2. mixture & grinder , h. washing machine semi-automatic , i. motor pump set , oil testing kit , battery charger , current transformer , potential transformer , 15 or 17 computer or latest version , d.c. shunt generator with control panel , motor-generator (ac to dc) with control panel , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker , fire buckets , fire extinguisher co2 , black board/white board , almirah , metal rack , lockers with drawers , working bench , writing board , instructor's table , instructor's chair , diesel generator set with changeover switch, over current breaker and water/air-cooled with armature, star-delta connections ac 3 phase , dc generators-series, shunt and compound type for overhauling practice , pillar electric drill machine motorized , motorised bench grinder , a.c. series type motor , single phase capacitor motor with starter switch , ceiling fan coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger (home) , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load. , ac phase-wound slip ring motor with starter switch , universal motor with starter/switch , synchronous motor with accessories like starter, excitation arrangements. , thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement , thyristor/igbt controlled a.c. motor drive with , single phase transformer, core type, air cooled , three phase transformer, shell type oil cooled with delta/ star , electrical machine trainer

Central Government / Public Sector

CTN :44800546 Due date: 29 Apr, 202629 Apr, 2026 NA
Tender For supply and installation of aerosol fire detection& suppressions system cartridge 20gm(1no) provided inpowerpanel/control panel of 3-phase memu/emu coaches as per rdsospecification no.rdso/pe/spec/ac/0192-2018(rev.1) and rdsoapproved makes only. all necessary modifications & accessoriesrequired for the installation of this item shall be with in the scope ofthe supplier. (warranty period : upto 12 months from the date ofdelivery.) [ warranty period: 12 months after the date of delivery ]

Central Government / Public Sector

CTN :44800547 Due date: 29 Apr, 202629 Apr, 2026 NA
Tender For supply and installation of aerosol fire detection & suppressions system cartridge 40gm(1no) provided in power panel/control panel of 3-phase memu/emu coaches as per rdso specification no.rdso/pe/spec/ac/0192-2018(rev.1) and rdso approved makes only. all necessary modifications & accessories required for the installation of this item shall be with in the scope of the supplier. (warranty period : upto 120 months from the date of delivery.) [ warranty period: 120 months after the date of delivery ]

CTN :44522613 Due date: 14 Apr, 202614 Apr, 2026 NA
Tender For corrigendum : procurement of spares for rawl 02 mk ii a system - procurement of b&d spares of rawl 02 mk iii system - 2kw power amp assy, rf driver unit, power combiner (l band), power supply unit - sspa, coupler dual dir n(f-f) 1-2ghz 15 f.w 5008, passive solid state limiter, connector rf 50 ad waveg-u-ide to co-axial, vswr aasy, radar signal distribution pcb, interface pcb, stc card, wgm, signal processor, digital video gen card, radar video interface card, tracker card, centroider card, downconverter pcb assy, upconverter pcb assy, synthesisor pcb-1, synthesisor pcb-2, l0-1 pcb assy, l0-2 pcb assy, status card - lo, status card - up, status card - dc, lna box assemly, detector dual channel 10-400mhz 10db, power supply unit-rx, motor starter manual 6.3a to 10a, fuse mains 30a 600v, fuse time-lag cube 600v 10a, pdu accs voltage relay, relay ph-montrg dgtl 3ph 3x90 to 400vac, contactor 4p 440vac 22a, contactor 3p 440vac 22a, filter emi 3ph m5 480vac 20a, filter emi 3ph m5 480v ac 30a, filter emi 1ph ms 300vac 10a, pou control card, power supply ac-dc 1ph 230 vin mlt-0/p, wg driyer spares, chiller spares, circuit breaker mcb 4p 10ka 230v 16a, miniature circuit breaker 2a,10ka, miniature,circuit breaker 8a, 10ka, miniature circuit breaker 4a, dpu mother board, rx- mother board, rx -child mother board, cold plate assy(sspa), rfd cold palte assy, cold plate assy(combiner), hose assy 1(ss 316), hose assy 2(ss 316), hose assy 3(ss 316), hose assy 4(ss 316), hose assy 5(ss 316), hose assy 6(ss 316), hose assy 7(ss 316), hose assy 8(ss 316), hose assy 9(ss 316), hose assy 10(ss 316), flow sensor 1.5-30 l/min, socket hex-27x50, plug hex-22x44.5, panel indication lamp, 230v, 8mm, red, panel indication lamp, 230v, 8mm, yel, panel indication lamp, 230v, 8mm, blue, bma straight jack smp female right-angle, bma straight jack smp female right-angle, bma straight jack smp female right-angle, bma straight jack smp female right-angle, cable assy bma straight jack sma rt280mm, cable assy bma straight jack sma rt180mm, bma straight jack sma straight plug flex, cable assembly ,2 sma right-angle plug s, 60 contracts double row cable assembly, 60 contracts double row cable assembly, conn rj 45 panel mount, sma adapter (female to female), con cirs thd pl ss11 mn13/3a crp tpl, conn cir st pl 25ss 19pos crp w/o cont, conn rf75 pin coax size 12 fir cablerg17, cable assy set-rf dr-iv--r 0/p, combiner cas set, 1/2" superflex cable (p-3110501), 1/2" superflex cable (p-3110501), 1/2" superflex cable (p-3110501), 1/2" superflex cable (p-3110501), 2 n-18 right-angle plug shf8 350mm, ddc - wg to coax adapter cable, conn cir pl st 5525 17p crp w/bma coax, conn cir pl st 5521 20p crp w/bma coax, bpa assy, control card (slave) asy, pre driver assy, driver 1 25w assembly, driver 2 500w assembly, control card(master) assy, main bias card, amplifier pwr 30mhz to 3 ghz 1w, power combiner 4- way, detector assy, track ball, sealed, 50mm, 88 key backlet panel (usb), waveguide assy 90deg e-bend 1.2-1.4 ghz, waveguide assy 90deg h-bend 1.2-1.4 ghz, flexible wave guide, circulatr hp 1.2-1.4ghz 10kw, rugged 24 port switch

CTN :44793308 Due date: 07 May, 202607 May, 2026 NA
Tender For supply & installation of aerosol based fire detection & suppression system cartridge for sg ac coaches. the cartridge contains 01 no. of minimum 40gm for power panel, 02 no. of minimum 15gm for rmpu control panel & 02 no. of minimum 10gm for inverter panel of sg ac coaches as per thetechnical requirement in annexure-g1 of rdso specification no. rdso/pe/spec/ac/0192-2018(rev-1) & rdso letter no. el/7.1.108/mssbc/main dated 12.05.2022. all necessary modification, clamping arrangement& accessories required for installation of this item for sg ac coaches shall be with the scope of this supplier. note: location of installation of aerosol fire cartridge shall be as per rdso letter no. el/7.1.108/mssbc/main dated 12.05.2022 & cartridge may be provided in line with technical parameters note: aerosol-basedfire detection & suppression system having action temperature should be 68-72 degree celsius as per latest rdso l. no. el/7.1.108/sbc/main dated 06.08.2025 [ warranty period: 30 months after the date of delivery ]
 Loading, Please wait...

Connect us via What's Up