Latest motor grader Tenders | Government motor grader Tenders

Central Government/Public Sector

CTN :44950482

05 May, 2026 1.36 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : offloading the work of fabrication and fitment of cutting edges of bg 825 motor grader of krishnashila project on as when required basis for a period of 365 days .

Central Government/Public Sector

CTN :45046576

09 May, 2026 9.70 Lacs

Sidhi - Madhya Pradesh

Tender For supply of cutting edge for motor grader bg825

Central Government/Public Sector

CTN :45030245

11 May, 2026 43.7 Thousand

Dhanbad - Jharkhand

Tender For repairing for transmission oil cooler of motor grader bg825 at adic kusunda area

corporations/Associations/Others

CTN :45034145

20 May, 2026 43.16 Lacs

Jhansi - Uttar Pradesh

Tender For providing of construction of drain for 2x210 mw ash water recirculation system at ptpp, parichha. - engaging jcb on hire bases including hire fuel driver helper etc. complete. , clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. , demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of material within 50 metres lead as per direction of engineer-in-charge in lime mortar , earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. , filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. , providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) , "centering and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform" , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars , random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) , brick work with fly ash (non modular) bricks of class designation 7.5 in foundation and plinth incement mortar 1:6 (1 cement : 6 coarse sand) , 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) , supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. , "hire charges of pump set of capacity 4000 litres/hour for dewatering which include cost of services of operating staff, cost of lubricating oil, diesel / petrol/ kerosene oil , other consumables for running the plant and machinery. the hire charges of plant machinery on per day basis are for single shift of eight working hours." , providing and laying non pressure np-4 class (heavy duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 900 mm dia rcc pipes.

CTN :44989245

05 May, 2026 3.19 Lacs

Ranchi - Jharkhand

Tender For repairing of draw bar, circle support and blade lifter of bg825 motor grader sl. no. 3247 for dakra ocp, n.k area.

CTN :44997333

04 May, 2026 3.23 Lacs

Chatra - Jharkhand

Tender For repairing/fabrication of 04 set cutting edge and its blade of motor graders (bg-825), sl.no. 25213 and 3239 of magadh project ,m-s area

Central Government/Public Sector

CTN :45011985

18 May, 2026 15.86 Lacs

Ranchi - Jharkhand

Tender For supply of hiring of excavators , motor grader , soil compactor , tractors with hydraulic trolley , tractor mounted water sprinkler

corporations/Associations/Others

CTN :45021663

05 May, 2026 NA

Valsad - Gujarat

Tender For annual rate tender for purchase of materials of construction / road resurfacing for year 2026-27 - brick, sand, kapchi 25 to 40 mm, grit 6 to 10 mm, handmade metal 40 to 63 mm, rubble 9 inch, cement (53 grade) 50kg, tor steel, 60 mm rubber rise, m40 paver block, 80 mm rubber rise, m40 paver block, g.s.b., dust (powder), brick masonry (1:6), stone masonry (1:6), plaster (1:4), r.c.c. slab filling 1:2:4, (to give the price of steel separately in kg), r.c.c. slab filling 1:1/2:3 (to give the price of steel separately in kg), p.c.c. (1:3:6), p.c.c. (1:4:8), pointing (1:2), yellow soil, hard murrum, handmade metal, np3 pipe 300mm, np3 pipe 450mm, np3 pipe 600mm, np3 pipe 900mm, np3 pipe 1200mm, j.c.b machine (including diesel driver), roller (including diesel driver), truck (including diesel driver), hydraulic center trailer (including diesel driver), semi dense carpet patch work on various roads in pardi municipal area, building materials and soil lifting work from pardi municipal area, compounding of tarkhuta in pardi municipal area (excavation including five wire, cross wire, cement pole), waterproofing, two coat putty or two coat of primer (including brushing), wall painting (three coat) with plastic emulsion paint, ceiling painting (three coat) with plastic emulsion paint, outer wall painting (three coat) with weather proof acrylic emulsion paint including priming coat, box cutting the road surface to proper slope and camber for making a base for the road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 mt lead., scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm depth including stacking useful materials on road side and disposing off remaining stuff, construction of granular sub-base by providing well-graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix-in place method with rotavator at omc and compacting smooth wheel roller to achieve the desired density, complete in two layers as per technical specification clause 401., providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in two layer. by mechanical means with 1 km lead, providing and laying bituminous base course 75 mm thick compacted in two layers with tack coat of asphalt (vg-30) 80/100 at the rate of 2.5 kg/10 sqmt and using b.t. stone aggregates of required gradation and asphalt 80/100 grade for mixing @ 1.99% by weight of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller including providing all materials, equipment’s, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 50mm thick compacted b.m. with b.t. aggregate as per mort&h specification and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and bitumen grade 80/100 for mixing at the rate 34.0 kg/m.t. i.e. 3.4% of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver censor finisher and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 25 mm thick compacted semi dense bituminuous concrete using stone chips as per mort&h gradation and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and 80/100 grade asphalt for mixing @ 5.0% by weight of total mix for binder including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibra

Central Government/Public Sector

CTN :44935864

04 May, 2026 22.89 Lacs

Dipka - Chhattisgarh

Tender For corrigendum : annual maintenance contract of the air conditioning system for cooling in 04 nos. water sprinklers (02 nos. bws 70 and 02 nos. ws 28-2), 03 nos. bd355 chain dozers, 02 wheel dozers, 07 nos. crane and 02 nos. motor graders, 02 tyre handlers, for a period of 365 days.

State Government

CTN :44953646

28 Apr, 2026 1.99 Lacs

Rewari - Haryana

Tender For - annual maintenance estimate of master road in urban estate dharuhera. making road pothole free by providing material, spreading in uniform layers with motor grader on prepared surface, spreading and compacting graded stone aggregate to wet mix macadam specification laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per technical clause 406 of mortandh specifications and all other works contingent thereto.

Motor Grader Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors