Latest movable jaw Tenders | Government movable jaw Tenders

Central Government/Public Sector

CTN :40957525

12 Aug, 2025 NA

Hubli - Karnataka

Tender For supply of procurement of glued joint for 60 kg rail on psc sleeper conforming to rdso drg. no. t -2572 as per manual of girj - 2024 with latest alt.and amendment if any. [ warranty period: 30 mon ths after the date of delivery ]

Central Government/Public Sector

CTN :41279691

07 Aug, 2025 NA

Mughalsarai - Uttar Pradesh

Tender For manufacture & supply of 52 kg special fish plate for glued insulated rail joint to rdso drg. no. t-671 with irs: t-1-2021. suitable for glued insulated rail joints as per manual for glued insulated rail joints (revised- 2024). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41279692

07 Aug, 2025 NA

Mughalsarai - Uttar Pradesh

Tender For manufacture & supply of 60 kg special fish plate for glued insulated rail joint to rdso drg. n o t-2572 with irs /t-1-2021 (first revision). suitable for glued insulated rail joints as per manual for glued insulated rail joint (revised 2024). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41280588

22 Sep, 2025 NA

Solapur - Maharashtra

Tender For manufacture and supply of glued insulated rail joints 6.5 m long g3(l) type for 52 kg rails with all fittings as per rdso drg. no. t-671 alt. 13 or latest alteration if any and specification as per man ual of glued insulated rail joint (revised - 2024) or latest if any. (the alt. in drawings & specification issu ed by rdso up to one month prior to tender opening date shall be applicable in this tender) note: - the r esponsibility to procure rails will solely lie with the manufacturer (bid including rail cost/per nos.) in ter ms of railway board letter no. 2022/tracki(p)/fabricators dt. 31.07.2023. ]

Central Government/Public Sector

CTN :41211448

18 Aug, 2025 NA

Delhi - Delhi

Tender For replacement of glued joint & switch expansion joint in the section of sse/p.way/hnzm under aden/hnzm

CTN :40899518

05 Aug, 2025 98.71 Lacs

Kota - Rajasthan

Tender For corrigendum : tn-20225 requirement of spares for railway track maintenance at kstps railway siding, kota. - antitheft rail clip rdso drg. no.t-6254 & t-6255, bolt & nut 25x390 mm rdso drg. no t-11534, bolt & nut 25x370mm rdso drg. no t-11532, bolt & nut 25x300 mm rdso drg. no t-11525, bolt & nut 25x260 mm rdso drg. no t-11521, bolt & nut 25x250 mm rdso drg. no t-11520, tapered split pin ce-22994/8, single coil spring washer (for 28 hook bolt), grooved rubber pad rdso drg. no t-5163, bolt&nut (t-5164)for guard rail bridge, 28 hook bolt (330 length), nut for 28 hook bolt (is-549), split pin (for 28 hook bolt)(is-549), grooved rubber pad (10mm) t-5199, elastomeric pad 25mm (245x270x25/30), elastomeric pad 25mm (245x410x25/30), elastomeric pad 25mm (245x220x25/30), check rail bolt rdso drg. no t-11513, curved switch 52 kg 1 in 12 rdso drg. no t-4733 (r), crossing 1 in 8 1/2 p&c t-20806 with complete fittings, elastic rail clip j type rdso drg. no t-4758, fish plate bolt (25x130) rdso drg. no t-11501, fish plate bolt (25x140) rdso drg. no t-1899, fish plate (1mtr.) rdso drg. no t-5915, glued joint 52 kg 6.5 mtr rdso drg. no t-5361, grooved rubber pad rdso drg. no (t-4610), grooved rubber pad rdso drg. no (t-4611), grooved rubber pad rdso drg. no (t-4612), grooved rubber pad rdso drg. no t-4613, grooved rubber pad rdso drg. no t-4614, grooved rubber pad rdso drg. no t-4615, grooved rubber pad rdso drg. no t-4616, grooved rubber pad rdso drg. no t-4617, grooved rubber pad rdso drg. no t-4618, grooved rubber pad rdso drg. no t-4619, grooved rubber pad rdso drg. no t-4620, grooved rubber pad rdso drg. no t-4621, grooved rubber pad rdso drg. no t-4622, p.c. sleepers (mono block)b6-60kg rdso drg. no t-2496, stock rail for 52 kg 1 in 8 1/2, sej 52 kg rdso drawing no. t - 4160, self sovening spring point (spring point) lever mech. -l3040, tongue raill, tongue raill 1 in 8 (approx 4.75 mtr length ) suitable for 52 kg bg track st layout as per rdso ( l), tongue raill 1 in 8 (approx 4.75 mtr length ) suitable for 52 kg bg track st layout as per rdso ( r), grooved rubber pad for sej 52 kg as per rdso drawing (t - 4161, t-4162 & t-4163), channnel sleeper (15 mc 160) 2540mm long, ms brackets rdso drawing no. t-4180, ms brackets rdso drawing no. t-4181, ms brackets rdso drawing no. t-4182, tee head bolts 25mm as per drawing no.t-2659, tee head bolts 25mm as per drawing no.t-2660, plate screw (140x24) mm rdso drawing no. t-3911, plate screw (130x24) mm rdso drawing no. t-3915, plate screw rdso drg no. t-3912, guage tie plate rdso drg. no. t-5203 & t-5203/2, slide chair rdso drawing no. t-4735, slide chair rdso drawing no. t-4736, slide chair rdso drawing no. t-4737, slide chair rdso drawing no. t-4738, slide chair rdso drawing no. t-4739, slide chair rdso drawing no. t-4740, slide chair rdso drawing no. t-4741, slide chair rdso drawing no. t-4742, slide chair rdso drawing no. t-4743, slide chair rdso drawing no. t-4744, slide chair rdso drawing no. t-4745, slide chair rdso drawing no. t-4746, slide chair rdso drawing no. t-4747, slide chair rdso drawing no. t-4748, fish plate (60/52kg) junction (t-696/699), m.s moon washer for s.t sleeper

State Government

CTN :40996362

13 Aug, 2025 NA

Wardha - Maharashtra

Tender For corrigendum : supply of cranial endoscopic set - cranial endoscopic set, straight forward telescope 0 , enlarged view, diameter 4 mm, length 18 cm, autoclavable. fiber optic light transmission incorporated., forward-oblique telescope 30 , enlarged view, diameter 4 mm, length 30 cm, autoclavable, fiber optic light, transmission incorporated., sheath for 0 degree 4mm & 18 cm scope, cup/pituitary/nucleus cutting forceps single action jaws, movable jaw opening upwards, diameter 3 - 4 mm, working length 18-20 cm, nasal forceps straight, upturned, size 1, with cleaning connector, working length 11-13 cm, sickle knife, pointed, length 18-20 cm, push button knife with telescopic blade, micro-knife pointed, in 3 parts handle shaft and knife insert, micro knife, sickle-shaped blade inserts only, micro knife, pointed, blade insert only, elevator,double-ended semi-sharp and blunt, length 25-26 cm, dissector, sharp, round spatula, tip angled 45 , size 2-4 mm, with round handle, length 25-26 cm, dissector, sharp, tip angled 15 , with round handle, size 2-4 mm, length 25-26 cm, scissors, straight, with small handle, with cleaning connector, working length 18-20 cm, scissors, curved to right, with small handle, with cleaning connector, working length 18-20 cm, scissors, curved to left, with small handle, with cleaning connector, working length 18-20 cm, scissors, curved upwards, with small handle, with cleaning connector, working length 18-20 cm, scissors, upturned 45 , delicate, sheath 360 rotatable, with cleaning connector, working length 18-20 cm, minature forceps, through- cutting, with fine flat jaws, bite 1-2 mm, straight, working length 18-20 cm, curette, round spoon, tip slightly angled, size 2-4 mm, with round handle, length 23-25 cm, curette, round spoon, tip slightly angled, size 1-4 mm, with round handle, length 23-25 cm, curette, round wire, id 3-5 mm, tip angled 90 , with round handle, length 23-25 cm, ring- curette, round wire, id 2-4 mm, tip laterally angled 90 , with round handle, length 23-25 cm, nasal forceps, with extra fine flat jaws, through-cutting, tissue sparing, width of cut 1-2 mm, straight sheath, straight jaws, jaws angled upwards 45 degree with cleaning connector, working length 16-18 cm, backbiter, backward cutting, cross-toothed, cutting width 3-4 mm, straight jaws, sheath diameter 2.5-3.5 mm, straight, handle with cleaning connector, working length 10-14cm

CTN :41096511

18 Aug, 2025 NA

Coonoor - Tamil Nadu

Tender For supply of machinery spares to all the factories of tantea - machinery spares - ctc, 21 teeth pinion shaft for sennova ctc gear box, 45 - teeth gear wheel shaft for sennova ctc gear box, 40 - teeth gear wheel shaft for sennova ctc gear box, high speed - housing block for sennova ctc, slow speed - housing block for sennova ctc, uj cross (srmt make) rll 793 type 47mm x 134mm (big cup), uj cross (srmt make) rll 790 type (small cup), uj cross 39.69 mm x 115.65 mm, uj cross 34.94 mm x 125 mm, propeller shaft - for sennova ctc, clutch shoe - for sennova ctc, movable jaw - for sennova ctc, fixed jaw - for sennova ctc, housing block axil spring - for sennova ctc, de-jamming - spring - for sennova ctc, mandrel adaptor with ring - for sennova ctc, mandrel end cap - for sennova ctc, conveyor drive v- pulley- for sennova ctc, gear box - adopter - for sennova ctc, gear box - adopter with combined- for sennova ctc, ss segments for 13" dia x 2" width (is 304 grade), roller bearing sleeve for kaizen super ctc machine 63.1 mm, bearing size 69.95, length 44 mm with m6 allen screw, roller bearing sleeve for kaizen super ctc machine 63.1 mm, bearing size 69.95, length 48 mm with m6 allen screw, clutch fixed jaw for keizen super ctc, clutch moveable jaw for keizen super ctc, gear box input shaft for keizen super ctc, roller bearing sleeve for sennova ctc, gun metal bush big for sennova ctc, gun metal bush small for sennova ctc, conveyor roller drum for sennova ctc - top and bottom, cam housing rh, cam housing lh, de-jamming lever 2" spring plate, micro dial assembly for sennova ctc, micro ball for sennova ctc, scraper spring for sennova ctc, clutch bracket with 6 mm bush, micro dial assembly for innova ctc, propeller shaft for innova ctc, mandrel adaptor for innova ctc, gear box adopter for innova ctc, clutch jaw (fixed and moving for innova ctc), clutch shoe - for innova ctc, high speed - housing block for innova ctc, slow speed - housing block for innova ctc, 7" od x 4c - civ pulley, 7 1/2" od x 4c - civ pulley, housing block for ctc( gem make), roller adopter for ctc gem make, roller end cup for ctc gem make, roller end cup with sprocket for ctc gem make, housing block for ctc(keizen super make), roller adopter for ctc (keizen super make), roller end cup for ctc keizen super make, gear box input shaft (t&i ctc keizen super), gear box input shaft (t&i ctc keizen nova), gear box input shaft (gem ctc ), gear box input shaft (mesco ctc ), drier, teflon bellow for kilburn drier ee model big size, teflon bellow for kilburn drier ee model small size, teflon bellow for kilnburn drier ff model 5500 mm x 250 mm x endless, gi tray 6 for tempest drier, gi tray 4 for tempest drier, tray carrying chain link small pin for tempest drier, drier chain link, 1 1/4" ms f bearing square, spring flat for kilburn drier, teflon bellow 250 mm width x 5240 mm endless, teflon bellow 250 mm width x 5250 mm endless, teflon bellow 5500 mm x 290 mm x endless, teflon bellow 4000 mm x 250 mm x endless, teflon bellow 4400 mm x 250 mm x endless, teflon bellow 5250 mm x 250 mm x endless, heater, c.i tube bank for 18 cm parucco heater, c.i fire bar for 18 cm parucco heater, c.i side tile lh & rh for 18 cm parucco heater, c.i centre tile for 18 cm parucco heater, c.i out side upper back plate lh & rh for 18 cm parucco heater, c.i inner side upper back plate lh & rh for 18 cm parucco heater, c.i lower back plate lh and rh for 18 cm parucco heater, c.i lower back plate centre for 18 cm parucco heater, c.i flue division plate lh & rh for 18 cm parucco heater, c.i upper centre back curved plate, ci fire bar for tea master heater- 18 cm, ci tube banks for tea master heater -18 cm, ms tube bank set for 18 cm parucco heater, ci fire bar for 33", rotor vane, coupling flange on shaft side (for 18" rotor vane), coupling flange on shaft side (for 18" rotor vane), coupling flange on gear box side side (for 15" rotor vane), coupling flange on shaft side (for 15" rotor van

CTN :41161926

12 Aug, 2025 NA

Netanar - Chhattisgarh

Tender For supply of glued insulated rail joint

Central Government/Public Sector

CTN :41118065

08 Aug, 2025 NA

Dhanbad - Jharkhand

Tender For dhanbad division:-through fittings renewal (tfr)=81.313 km. and renewal of sej(07 nos.) and glued joint (72 nos.) in the jurisdiction of sr. den/1/dhn.

Movable Jaw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector