Latest ms clamp Tenders | Government ms clamp Tenders

Corporations/Associations/Others

CTN :41246935

13 Aug, 2025 NA

Koradi - Maharashtra

Tender For supply of providing and fixing of led street light fitting 23 to 25w,providing and fixing of led street light fitting 26 to 30w,providing and fixing of led street light fitting 40 to 50w,providing and fixing of led street light fitting 60w,providing and fixing of led street light fitting 70 to 75w,providing and fixing of led street light fitting 85 to 90w,providing and fixing of led street light fitting 100 to 110w,providing and fixing of led street light fitting 120w,providing and fixing of street light bracket made from 40 mm.,providing and fixing of pvc aluminium service wire wptc 2 x 4 sq. mm.,providing and fixing of pvc aluminium service wire wptc 2 x 6 sq. mm.,providing and fixing of pvc aluminium service wire wptc 2 x 10 sq. mm.,providing and fixing of ms clamp,providing and fixing of single phase 240v street light control panel up to the max load of 6kw spn mcb 40a,providing and fixing of single phase 240v street light control panel up to the max load of 12kw spn mcb 63a,providing and fixing of three phase 415v

CTN :41228018

04 Aug, 2025 11.68 Lacs

Chandigarh - Chandigarh

Tender For providing electrical supply to newly installed acs in various class of govt. model senior secondary school, school-16-d,chandigarh. - dsr item no. 2.10 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required., single pole, triple pole, dsr item no.2.5 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer) as required (note: vertical type mcb tpdb is normally used where 3 phase outlets are required)., 4 way (4 + 12) double door, dsr item no.14.16 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., 160 mm dia (od-160 mm & id-135 mm nominal), providing and fixing following rating mccb 4 pole 415 volt (thermal magnetic / microprocessor release) without ms enclosure for over load and short circuit protection, 36-55 ka breaking capacity (ics=100% icu) with positive isolation. (as per complete item no. 4 of the dnit)., 100 amp 4 pole 36 ka mccb (thermal magnetic release)., 250 amp 4 pole 36 ka mccb (thermal magnetic release)., 400 amp 4 pole 50/ 55 ka mccb (microprocessor release) with lsig protection., supply and laying of xlpe insulated pvc sheathed aluminium conductor cable of 1.1 kv grade as per is 7098 (part-i) 1988 (amended up to date) of the following sizes to be laid direct on surface with the help of m.s. clamp of suitable thickness. (as per complete item no. 5 of the dnit)., size 35 sq.mm 3.5 core xlpe al. arm. cond. cable, size 25 sq.mm 3.5 core xlpe al. arm. cond. cable, supply and laying of xlpe insulated pvc sheathed aluminum conductor cable of 1.1 kv grade as per is 7098 (part-i) 1988 (amended up to date) of the following sizes to be laid in existing rcc/hume/dwc/ metal pipe. (as per complete item no. 6 of the dnit)., size 300 sq.mm 3.5 core xlpe al. arm. cond. cable, supply, erection testing and commissioning of l.t. cubical panel indoor type with degree of protection ip 54 fabricated from 14 gms (2mm) thick crca sheet and ms flat, (as per complete item no. 7 of the dnit)., 01 no. lt panel approx. size 1150 mm x 2400 mm

CTN :41228163

07 Aug, 2025 6.75 Lacs

Haveri - Karnataka

Tender For supply of nrlm shed matirials for kudal grama panchayath hanagal taluk haveri dist - display board / cib_kdll, lumpsum material_kdll, plasticizer or super plasticizer_kdll, binding wire_kdll, tmt bars fe 500_kdll, silver oak or equivalent planks 38 mm thick_kdll, solid concrete block (40x15x20 cms) 5.00 n sqmm_kdll, corbon electrodes_kdll, rms gusset plate_kdll, ms pipes of 80 mm to 100 mm dia_kdll, gi pipe 50 mm dia b class_kdll, broken stone aggregate 12 mm to 10 mm size_kdll, broken stone aggregate 20 mm size_kdll, z section_kdll, hinges 5 heavy duty_kdll, handles_kdll, ms clamps_kdll, t section_kdll, mathi or nandi wood planks for panels 25 mm thick_kdll, honnewood planks for panels 20 mm thick_kdll, honne wood_kdll, unit cost as per the specification_kdll, water proofing cement paint_kdll, dry distemper_kdll, enamel paint_kdll, vitrified tiles 600x600 mm_kdll, border tiles 30 x 10 cms_kdll, glazed tiles 300x450_kdll, coarse sand (zone iii)_kdll, portland cement_kdll, polyenthylene water storage tank of specified capacity l_kdll, pvc pipe of 10kg cum,110 mm_kdll, pvc pipe of 6kg cum,63 mm_kdll, polythylene pipes high density 32mm external dia_kdll, bib cock 20mm nominal bore_kdll

CTN :41221730

09 Aug, 2025 NA

Batote - Jammu And Kashmir

Tender For rate contract for fixing of rates for supply of materials for repair of distribution transformers at divisional store of electric division jpdcl batote for the financial year 2025-26 or till next year tender is finalized - super enameled aluminium wire swg-21 (isi mark) in exchange of scrap, super enameled aluminium wire swg-18 (isi mark) in exchange of scrap, super enameled aluminium wire swg-16 (isi mark) in exchange of scrap, super enameled aluminium wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-12 (isi mark) in exchange of scrap, super enameled copper wire swg-11 (isi mark) in exchange of scrap, aluminium strip for lt winding of sizes, copper strip for lt winding for 400 kva/630kva transformers 8/4 - 10/4.5, lt bush rod brass-complete 12 mm, lt bush rod brass-complete 20 mm, lt bush rod brass-complete 25 mm, lt bush rod brass-complete 30 mm, ht bush rod 12 mm brass for 11/0.440 kv transformer (complete), l.t bush for 11/0.440 kv transformer, 12 mm, l.t bush for 11/0.440 kv transformer, 20 mm, l.t bush for 11/0.440 kv transformer, 25 mm, l.t bush for 11/0.440 kv transformer, 30 mm, ht bush 12 mm for 11/0.440 kv transformer, butter paper, cotton tape 1 roll, rubberized cork sheet 4 mm thick 3x3, rubberized cork sheet 5 mm thick 3x3, cork strip 4mm, lethoride sheet, packing sheet 1mm & 1 mm, glass empire/glass sleeves 0-4mm, glass empire/glass sleeves 8-10mm, bakelite tubes of sizes (as per sample), packing gutties 1 ,1 , nuts and bolts for transformer of sizes, insulating varnish dr. beck, old cotton sarees/ waste, wooden wedges size, ht washers, lt washers m-20, lt washers m-25, lt washers m-12, ht bush clamps ( bimetallic, heavy duty), fevicol, transformer oil, three phase, 2 hp motor, filter paper pack 36 inch/3 feet, 2 kw heater 2.5 feet long, stainless steel type(u shape) tubular finned oven heating element, thermostat rotational type, contactor ml-2, 3-phase motor 1.5 hp, filter packs 2 feet micro, thermostat 0-110, indicator (ryb) big, sproket set 92x25x25, sproket 25, single teeth, chain 10 feet (big), 1/2, chain 10 feet (big), 3/4, chain small 10 feet, 1/2, chain small 10 feet, 3/4, hose pipe, 1 inch, electronic weighing machine (capacity 10kg), electronic weighing machine (capacity 200kg), electric chain pulley 3 ton, electric chain pulley 5 ton with remote, contactor ml-4, steel washer for transformer-as per sample, ms clamping ring-as per sample, m-seal

corporations/Associations/Others

CTN :41223665

05 Aug, 2025 20.00 Lacs

Ahmedabad - Gujarat

Tender For maintenance ,repairing,restoration,welding/fabrication works and upgradation works of water line wrok and water leakage reparing ci / di / ms. clamping method in bapunagar ward north zone.( annual rate contract tender)

State Government

CTN :41225832

02 Aug, 2025 NA

Delhi - Delhi

Tender For supply and installation of electrical and mechanical equipment of tubewell at ram nagar sps. - supply and installation of electrical and mechanical equipment of tubewell at ram nagar sps by carrying out following works:- dismantling/lifting of tubewells with the help of gas cutter and heavy manual labour., supply of pvc insulated sheathed copper conductor cable for submersible pump motor of size 6mmsqx3core make :- finolex/ havells/ grandlay/djb approved make, supply of 80 mm dia d/f g.i pipe in b class as per isi 3 mtr long complete with cutting flange for submersible cable and support welded. make :- jindal/ tata., supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia., supply of 80 mm dia g.i bend with both side flanged welded, s/o m.s. clamp of m.s. strip 8mm thick duly hole for holding the pipe of 80 mm dia with nut bolt and washer, s/o m.s bore cover made out of m.s. plate suitable for 12" dia bore complete with suitable hole for pssing the 80mm dia gi pipe., s/o ci, d/f swing type nrv of 80mm dia make:- kirloskar/ ivc, s/o electronic dozing pump (4lph,5.5 kg) electrically controlled operated 230v, 50 hz, supply chemical grade tank of 100 ltrs with pipe make- milton roy/clomax, s/o nut bolts with washer of good quality of 1/2"x2" size, s/o rubber packing sheet neoprene rubber 50% synthetic 50% make :- jyoti / national. (1.5 to 2.5 mm) thickness., lighting arrangement including providing fixing1 no. tube light fitting 40 watt , 1 no. bulb point, 1 no. flood light on wall of room and also control board.etc.i/c electrification of room., labour charges for lowering the submersible pump set with all allied e&m equipments and fixing delivery line, valves, electronic dozing pump i/c hardware items as nut, bolts & washer i/c cartage to & fro., lt panel work of tubewell in ram nagar sps :- dismantling of lt panel with allied equipment with the help of skilled labour.., s/o power contactor 32 a. triple pole. make l &t/ havells/djb approved make., s/o front mounting add on aux contact block. make : havells/l&t/djb approved make., s/o three pole power contractor -25a cap. make l&t/ havells/djb approved make., s/o ampare meter (0-30a) 4 size squ. type. make l&t/ae/djb approved make., s/o voltmeter (0-500v) 4 size squ. type. make ae/l&t/djb approved make., s/o indicating lamp set for ryb phase. make l &t/ havells/djb approved make., s/o single phase preventor. make l&t/ minilac/djb approved make., s/o timer switch digital/anolog type. make l&t / havells/djb approved make., s/o over load relay thermal type 14-23 a. make l &t/ havells/djb approved make., s/o star delta timer on delay. make l&t /havells/djb approved make., s/o sp mcb 6a. make : l&t/havells/djb approved make., s/o 3p mcb 63. make : l&t/havells/djb approved make., push button 22.5mm(red / green) make : l&t/havells/djb approved make., s/o 4p 63 amp elcb make : l&t/havells/djb approved make., changeover switch 63 amp. make : l&t/havells/djb approved make., s/o 100a 3p mccb 25ka. with spreader make : havells/l&t/djb approved make., s/o rubber mat for electrical purpose of size 1mx2m and 3mm thick. make:- jyoti/ national /djb approved make., labour charges for repairing of lt panel with installation of above components i/c electric connection , testing and commissioning on load.

State Government

CTN :41189579

12 Aug, 2025 8.09 Lacs

West Tripura - Tripura

Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi

State Government

CTN :41175074

30 Jul, 2025 NA

Delhi - Delhi

Tender For repairing of damaged enm equipments at tube well no nt 148 at shank no 17 d point palla area ward no 5 baktawakpur ac 01 - lifting of p/set by the help of chain pully, clamps and heavy men menpower after cuting rusted/wornout and opening of nut bolts to dismental the p/set, pipes, valves etc., s/o submersible cable with copper conductor having three core sizes 6 sq. mm working on 1100v. make:-finolex/plaza/unistar or any other make approved by djb., making and supply of ms clamp of 500 mm long x 75 width x 12 mm thick complete with nut and bolts and washers for holding the 100 mm dia pipe including bending and shaping etc. as required., s/o ci/m.s bend 100 mm dia 90deg. double flange. heavy class make: - ganesh/ isi, s/o of 3 mtr. gi pipe 100 mm dia size ,medium class with gi flange welded in both sides 3 mtr long with ms strips complete with threading work on each side of pipe each flange should be 4 holes and cut for cables. make :- jindal / tata., s/o g.i required off size threaded heavy duty nut-bolts of good quality., supply of ms bore cover 4 mm thick suitable for bore size in 2 pieces complete with bolting arrangement angle iron frame and provision of 100 mm dia hole in the center., s/o pressure gauge of 100 mm dia, 0-30 psi complete with socket, bush make:-h-guru/fiebig, making water sample point with the help of socket, niple, cook valve, tee and extended pipe etc. of size 1/2 inch., making and supply of g.i tail piece of 100 mm dia. , one mtr. long size made out of medium class pipe complete with one end threaded and other end fitted with g.i. flange heavy and cut for submersible cable. mak of pipe - jindal/tata., repairing of starter panel board suitable for 20 hp submersible pump set having following works :- 1. replace faulty power contacts.2. replace faulty relays.3. monir wiring work.4. repalce faulty push button and indication lamp.5. painting of panel board., supply of neoprene rubber sheet having 50% neoprene , 3 mm thick make jyoti/worth/djb approved, installation of all e&m equipments, lowering pump set into the bore all piping work fixing of valves and accessories executing minor civil works, making electrical connections with cable as required size by the help of chain pully to lower pump sets testing and commissioning of all e&m equipments at no load and full load conditions as per standard from full satisfaction of engineer-in-charge. the job also includes the transportation charges, providing/fixing of required gap piece, for fixing valves, pressure gauge with the help of welding machine etc. note- the repaired pset will be provide by the departmentlly; if required.

CTN :40713114

04 Aug, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : purchase of ms hinges, pillar locking arrangement, ms clamp (gland patti), pillar key

CTN :41138400

04 Aug, 2025 4.23 Lacs

Kurnool - Andhra Pradesh

Tender For supply of new led lights, ms clamp sets and 25 mm dia gi pipe for the maintenance of street lighting at extension areas in yemmiganur municipality

Ms Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

corporations/Associations/Others

State Government

State Government

State Government