Latest ms container scrap Tenders | Government ms container scrap Tenders

CTN :44530773

25 Mar, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1, bobrnm1, boxnr, boxnm1 & bobrm1 wagons no as following: [1] ser 30078963020 bcnm1 [2] er 72029678980 bobrnm1 [3] er 25029660899 boxnr [4] er 10029661281 boxnm1 [5] scr 10099662737 boxnm1 [6] er 72029561275 bobrnm1 [7] ser 25079662478 boxnr [8] er 72029661159 bobrnm1 [9] er 72029662002 bobrnm1 [10] cr 72019360383 bobrm1 [11] nr 10039660588 boxnm1 [12] ser 10079649802 boxnm1 condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (144.640 mt) is the lot quantity (144.640 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge .[3].if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund, or proportionate return of sale value shall be entertained.[4].if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5].no dispute regarding variation in weight shall be entertained after e-auction sale.[6].before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for bcnm1, boxnr & boxnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(ii)for bobrnm1 & bobrm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(iii) sl no. 05 and 08 are fitted with 22w(m) casnub bogie which are to be sold with wagon.

CTN :44530775

25 Mar, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bvzc wagons no as following: [1] scr 85099660762 bvzc [2] er 85029660251 bvzc [3] er 85020160019 bvzc [4] nr 85039660418 bvzc [5] ser 85079704424 bvzc [6] cr 85019960026 bvzc [7] secr 85140439545 bvzc [8] special repair 85060460087 bvzc [9] nr 85030150413 bvzc [10] special repair 85069757119 bvzc condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (92.350 mt) is the lot quantity (92.350 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge .[3].if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund, or proportionate return of sale value shall be entertained.[4].if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5].no dispute regarding variation in weight shall be entertained after e-auction sale.[6].before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- for bvzc : wheel set with rb and axle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024

Central Government / Public Sector

CTN :44530955

26 Mar, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - 031326010100 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons,bcn m1, boxn m1 , available on rails. 1) cr bcn m1 30019060474, 2) scr boxn m1 10099660337 ,3) ser boxn m1 10079660333 ,4) ser boxn m1 10079667271 ,5) nr bcn m1 30039018288 . location road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. wheel set with ctrb, 8. casnub bogies with all fittings, , 9. yoke pin support (1st plate),10. safety plate with anchor plate (2n d plate 11. yoke support plate(3rdplate), 12., yoke pin, 13) draft gear followers,14. knuckle pin 15.knuckle thrower.16. bcn swing. ds8 no:0999603100. dt:24.01.26. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 39.124 .mt sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

CTN :44481078

24 Mar, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - scrap iron and steel which will be released after cutting of cond. 8 wheeler bg bcnm type wagon. wagon no. 30099083066/ bcnm-1/scr tw 24.80mt 30019060504/ bcnm-1/cr tw 26.36 mt 30029024176/ bcnm-1/er tw 25.50mt 30079060599/ bcnm-1/ser tw 25.80 mt 30099060678/ bcnm-1/scr tw 27.20mt30079060087/ bcnm-1/ser tw 27.40 mt 30069004336/ bcnm-1/sr tw 26.27 mt 30039018387/ bcnm-1/nr 26.0 mt 30029060655/ bcnm-1/er tw 26.0 mt 30079060070/ bcnm-1/ser tw 25.10 mt30079067420/ bcnm-1/ser 25.0 mt 30039062656/ bcnm-1/nr 25.55 mt 30099060210/ bcnm-1/scr 25.80 mt 30039080810/ bcnm-1/nr 24.67 mt 30019038350/ bcnm-1/cr 27.26 mt 30019061136/ bcnm-1/cr 24.0mt 30079060605/ bcnm-1/ser tw 26.10 mt 30019060177/bcnm-1/cr 25.50 mt 30069060820/ bcnm-1/sr 25.90mt 30069061544/ bcnm-1/sr tw 26.10mt 30069062381/ bcnm-1/sr tw 26.90mt 30039062663/ bcnm-1/nr 27.20mt complete/incomplete, sort and sizes, with or without doors, without excluded items. (cutting allowed)lying at bg wagon repair shop mws iznd (gst 18% hsn 72044900)

Central Government/Public Sector

CTN :44481038

27 Mar, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - (a) scrap condemned unserviceable dg sets. capacity- 3.5 kva, qty - 02 nos, cr no. 431 & 433 , make - kirloskar, 1500 rpm, single phase, 230v, 50hz,15.2 amp, insulation class-f, excitation voltage-70v. (b) scrap condemned unserviceable portable petrol start kerosene run generators sets. the details are as follows:- (1) capacity- 2.2 kva, qty -02 nos., cr no 698 & 613 , make -birla, 1500 rpm, single phase, 230v, 50hz, 10amp, insulation class -f (2) capacity- 2.1 kva make- honda qty - 02 nos. , cr no 500 & 466 , 1500rpm, single phase, 230v, 50hz, 10amp, insulation class -f. total lot qty- 06 nos.

Central Government/Public Sector

CTN :44454288

21 Mar, 2026 NA

Multi City - Haryana

Tender For auction sale of rolling stock - scrap old iron & steel cut up material released from cond. wagon/judw. loc:- lying in store depot/stabling yard/judw [1]. 85079560198 bvzc ser [2]. 85019560066 bvzc cr [3]. 85100429777 bvzc ecr [4]. 85069760362 bvzc special repair [5]. 85050660046 bvzc nfr [6]. 85100360124 bvzc ecr [7]. 85069760096 bvzc special repair note:-[1] all are four wheeler bvzc wagon. [2] weight shown in approximate sold whole lot except nfs and excluded components of bvzc wagon. [3] all excluded components will be taken back as per list approved by hd. qtr ndls vide l/no.22- m/22/ec(mc-i)pt.iii dated 17/02/2005. [4] wheel and axle complete with roller brg. axel/box will be taken back vide cwm/judw l.no.126-s/12 dt.12/03/2019. [5] cutting will be allowed for loading purpose afterfollowing all the fire prevention related instruction of judw depot and loading by purchaser. qty = 07 nos = 07 units, app. wt.= 66.37 mt (pl no.98110032)

Central Government/Public Sector

CTN :44432463

19 Mar, 2026 NA

Ajmer - Rajasthan

Tender For auction sale of depot ferrous scrap - scrap u/s m.s. turning boring with admixture from wagon no. boxn-m1/10038360106/cr/188571, location: gs yard ajmer

Central Government/Public Sector

CTN :44432337

19 Mar, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - scrap wagon (1)ser-10079698534, boxnm1 (2)ser-10079667486, boxnm1 (3)ser-10079663198, boxnm1 (4)ser-10079662832,boxnm1 (5)wr-12089660013,boxnhsm1, (6)ser-10079673104, boxnm1 (7)cr-10019660041,boxnm1 (1-7)location-off track south side line no.-01/wcc/ddu (8)wr-10089762966, boxnm1 (9)ser-10079644616,boxnm1 (10)ser-10079664294 (8-10)location-line no.-01 wcc/ddu

Central Government/Public Sector

CTN :44432772

18 Mar, 2026 NA

Kota - Rajasthan

Tender For auction sale of others - 98050126 u/s ms scrap consisting of cut pieces of angle iron, channel, side bearer housing, nut, bolt, pins, door rester, lock assembly, cr, friction liner plats, stricker wear plates etc. .(stack 01). qty. 80mt for stock holder sse/c&w/g/kota. ss-11 no.- sse/c&w/g/ktt/2025-26/c/14 date 12.01.2026. ds-8 no. 043387 date 12.01.2026 lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot.the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidder must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date.delivery will be given by actual weight from govt. approved dharam kanta.material are lying in rajasthan state.

Central Government/Public Sector

CTN :44432713

19 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components, end shield, air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs, cowl, rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly, coupler front plate, coupler rear plate, break liver, bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover, axle guide and racer, traction link, the bar, traction housing, spheriblock, brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, pantograph, deflector for hitachi traction motor, protective tube collars, alternator cowl of various sorts, anchor link, flushing valve, hydraulic nut,emu scrap including fan body, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , semi permanent coupler, bogie mounted brake cylinder of ac loco,traction link with bush, emu after cooler, cr tank,cbc restrictor,centre pivot block assembly with rubber bush, draw and buff gear, side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 980

Ms Container Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector