Get complete information related to latest Ms Erw Tube Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ms Erw Tube Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ms Erw Tube Tenders.
Tender For supply of ms square tube 45x45x2.6mm to specn is:4923-97 with latestamendment no.1 h f shs gr.yst 240 with plain carbon steel withminimum carbon of 0. 15% (or) steel with eq uivalent carbon contentof maximum 0.39% in specific length of 6.14 mtrs. [ warranty peri od: 30 months after the date of delivery ]
Tender For auction sale of m. s .scraps_43.310 mt_rate per mt,m. s .scraps_light weight _8.930 mt_rate per mt,cast steel_2.180mt_rate per mt,old transmission wheel (steel)_2.500mt,old ss tube and other ss scrap_0.617mt_rate per mt,empty carbouys_60 ltrs capacity_1 lot_rate per lot,air conditioner_1 lot _rate per lot,old weighing scale _1 lot _rate per lot,old electronic weighing scale _1 lot _rate per lot,empty ms barrels_200 ltrs capacity _1 lot _rate per lot_1 lot _rate per lot,empty ms paint tin_20 ltrs capacity _1 lot _rate per lot,electricals & instruments scraps _1 lot _rate per lot,old computer spares _1 lot _rate per lot
Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa
Tender For bid to ras bid to ras bid seamless alloy steel tubes - to ras supply of tube od 69.85 x 5.08 x 11000-sa213t11 , tube od 69.85 x 5.08 x 11500-sa213t11 , tube od 69.85 x 5.08 x 8200- sa213t11 , tube od 69.85 x 5.08 x 9000-sa213t11 , tube od 69.85 x 5.08 x 9600-sa213t11 , tube od 44.5 x 7.6 x 11500-sa213t22 , tube od 50.8 x 8.13 x 10000-sa213t22 , tube od 38.1 x 6.6 x 10000-sa213t22 , tube od 38.1 x 8.13 x 10000-sa213t22 , tube od 69.85 x 5.08 x 10000 sa213t22 , tube od 69.85 x 5.08 x 10800-sa213t22 , tube od 69.85 x 5.08 x 11100-sa213t22 , tube od 69.85 x 5.08 x 11800-sa213t22 , tube od 69.85 x 5.08 x 13100- sa213t22 , tube od 69.85 x 5.08 x 9000-sa213t22 , tube od 57.15 x 9.6 x 10000-sa213t22 , tube od 69.85 x 8 x 10000-sa213t22 , tube od 38.1 x 8.13 x 10000-sa213t12 , tube od 38.1 x 8.13 x 11000-sa213t12 , tube od 38.1 x 8.13 x 7000-sa213t12 , tube od 38.1 x 8.13 x 9200- sa213t12 , tube od 38.1 x 7.11 x 10000-sa213t12 , tube od 38.1 x 7.11 x 11000-sa213t12 , tube od 38.1 x 7.11 x 9000-sa213t12 , tube od 38.1 x 6.6 x 10000-sa213t12 , tube od 50.8 x 8.13 x 10000-sa213t12 , tube od 50.8 x 8.13 x 10500-sa213t12 , tube od 50.8 x 8.13 x 12150- sa213t12 , tube od 50.8 x 8.64 x 10000-sa213t12 , tube od 54 x8.13 x 10000-sa213t12 , tube od 54 x 8.13 x 12150-sa213t12 , tube od 38.1 x 8 x 9000-sa213t12 , tube od 60.3 x 10.16 x 10000-sa213t12 , tube od 60.3 x 10.16 x 11000-sa213t12 , tube od 60.3 x 10.16 x 9500- sa213t12 , tube od 44.45 x 7.62 x 10000-sa213t12 , tube od 44.45 x 7.62 x 11000-sa213t12 , tube od 44.45 x 7.62 x 7500-sa213t12 , tube od 44.45 x 7.62 x9000- sa213t12 , tube od 33.4 x 5.6 x 10000-sa213t12 , tube od 41.3 x 7.8 x 10000-sa213t12 , tube od 41.3 x 7.8 x 11000-sa213t12 , tube od 41.3 x 7.8 x 12000-sa213t12 , tube od 41.3 x 7.8 x 9000-sa213t12 bid number/ ( ( ) ): gem/2024/b/5173129 dated/* : 18-07-2024 bid document/ 3 1 / 44
Tender For supply of stainless steel bourdon tube pressure gauge as per npcil ts , type test for stainless steel bourdon tube pressure gauge as per npcil ts , differential pressure gauge type level gauge with remote diaphgram seal and capillary as per npc ts , type test for differential pressure gauge type level gauge with remote diaphgram seal and capillary , remote diaphgram seal type compound pressure gauges with capillary as per npcil ts , type test for remote diaphgram seal type compound pressure gauges with capillary as per npcil ts , temperature gauge with thermowell (gas filled type) with capillary as per npcil ts , type test for temperature gauge with thermowell (gas filled type) with capillary as per npcil ts
Tender For corrigendum : supply of vehicle spare parts - spanner box tubular hexagonal steel plated de 10 x 11 mm , spanner ojde bs and w spear head normal series bs 3 by 8 x 7 by 16 , spanner ring cracked double ended steel plated 7 x 8 , drift pin brass parallel 13 x 160 mm , pounches round 5 mm , spanner open jaw fixed double ended steel 5 x 5 mm , plier round short nose 150 mm , spanner socket bihexagon metric 1 by 2 in 21mm , spanner socket bihexagon metric 1 by 2 in 22mm , spanner socket bihex american and unified 3 by 4 sq drive size american 1by 16 , spanner socket bihex american and unified 3 by sq drive size american 15 by16 , oiler hand lubricating conical , spanner ojde bs and w spear head normal series bs 3 by 4 x 5 by 16 , file round smooth 200mm , spanner open jaw fixed double ended steel plated 19 x 22 , pad lock ig 4 lever 40mm , combination plier side cutting insulated 200mm , spanner socket bihexagon metric 1 by 2 in sq drive 24 mm , pounches round 6 mm , files knife bastard 150 mm , cutter tube , spanner socket bihexagon metric 1 by 2 in sq drive 26 mm bid number/ ( ( ) ): gem/2024/b/5534681 dated/* : 22-10-2024 bid document/ 1 1 / 18