Latest ms joint Tenders | Government ms joint Tenders

Central Government / Public Sector

CTN :40484371

17 Jun, 2025 NA

Vijayawada - Andhra Pradesh

Tender For bza division:-bza-vskp sec:- provision of pvc pipe covering on bottom x-bracings and covering of cg top flanges with galvanized ms sheet and replacing of ms side pathway at isolated damaged locations with ss chequered plate on br.no.248a (rail cum road bridge) in sse/br/ii/rjy section under aden/br/n/bza jurisdiction.

CTN :40451089

26 May, 2025 4.04 Lacs

Multi City - Telangana

Tender For maintenance of water supply items like gatevalves flanges ,end caps , tees and ms flanges in thukkuguda municipality under mgf(reserved for sc)

CTN :40389042

09 Jun, 2025 NA

Kolkata - West Bengal

Tender For construction of artificial rock climbing wall cum slithering platform in garrison battalion ground - earth work in excavation by mechanical means hydraulic excavator oblique manual means in foundation trenches or drains not exceeding 1 dot 5 m in width or 10 sqm on plan , providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering , providing and laying in position specified grade of reinforced cement concrete , brick work with burnt clay fps non modular bricks of class designation 7 dot 5 in foundation and plinth in ratio cement mortar 1 ratio 4 bracket 1 cement ratio 4 coarse sand , 12mm thick cement plaster 1ratio4 , filling available excavated earth excluding rock in trenches plinth sides of foundations , supplying and filling in plinth with jamuna sand under floors including watering ramming consolidating and dressing complete , steel reinforcement for rcc work including straightening cutting bending placing in position and binding all complete upto plinth level thermo mechanically treated bars , supplying of m s bolts round holding down of anchor boltds with nuts and washer plates complete , structural steel work , providing and fixing ms chequered plate 5mm thick , providing and fixing 0dot8mm thick colour coated sheet for shed , designing providing and fixing frp 3d panel with minimum 6 mm thickness at center and 10 mm at flanges , providing and fixing ss top belay bar , movable climbing holds , providing seat harness , static rope 10 mm , carabiner , providing bracket fdotodot8 bracket , providing mitton , gri gri , providing quick draw , 30mm manila rope bid number/ & ( * ) : gem/2025/b/6191380 dated/ + : 18-05-2025 bid document/ 3 3 1 / 19

CTN :40431850

05 Jun, 2025 4.22 Lacs

Multi City - Andhra Pradesh

Tender For supply and delivery of water supply materials for maintenance of water supply in piduguralla municipality under general funds - manufacture, supply, & delivery of hdpe (pe ?100 grade) fittings conforming to is 4984 - 2016 including transportation to anywhere in a.p. excluding all taxes ms flanges 250mm dia

Corporations/Associations/Others

CTN :40418440

06 Jun, 2025 4.31 Lacs

Chikkodi - Karnataka

Tender For annual supply of water supply materials of town municipal council chikkodi - handpump rods, motor cover box, plier (pakkad), flexible rubber 1inch pipe, flexible rubber 3/4inch pipe, flexible rubber 1/2inch pipe, steel grip tape, quick setting cement, dr. fixit water proof solution, cement 53grade, kodli., kurpi., nylon rope, rope., rubber footvalve tongue, leather footvalve tongue, grease., gasket, dori, kaccha rubber, fuse wire, fuse, main switch, ltlk 25hp starters, ltlk 15hp starters, ltlk 10hp starters, ltlk 7.5hp starters, ltlk 5hp starters, ltlk 1hp starters, column pipes 2inch, cable 6 sqmm, cable 4 sqmm, cable 2.5 sqmm, monoblocks motors 15hp, monoblocks motors 10hp, monoblocks motors 2hp, grdinder / cutter small 4inch dia, grinding blades 4inch, cutting blades 4inch, tester, binding wire 1/18, electrical wire 10mm, electrical wire 7.2mm, electrical wire 3.2mm, wired brush 6inch (metal), brush painting 2inch., brush painting 1inch, oil bonds, oil paints, measuring tape, insulator tap, tixo tape, teflon. tape., hammer., hacksaw blade double, hacksaw blade single, kaav (handle), pharoah tata (sanaki), pickaxe tata (tikaav), feviquick, carpetch, water m-seal, m-seal., lambi, araldite., apvc solution, solution, kanas, pipe leakage filler, white rubber packing, ms big locks, ms medium locks, ms small locks, plastic charging battery, plastic butti., plastic bucket., ms star screw driver, ms screw driver, ms 1inch crow bar (haari), ms 3/4inch crow bar (haari), gi 8x10 ring spanner, gi 6x8 ring spanner, gi 10x12 patti spanner, gi 8x10 patti spanner, gi 6x8 patti spanner, ms 14inch nr valves, ms 12inch nr valves, ms 8inch nr valves, ms 4inch nr valves, ms 3inch nr valves, ms 2inch clips, ms 1inch clips, ms 3/4inch clips, ms 1/2inch clips, ms vicors, ms nut bolts, ms j hooks, ms tar nails, ms gattu nails, gi 3inch barrell nipple, gi 2 1/2inch barrell nipple, gi 2inch barrell nipple, gi 1inch barrell nipple, gi 3/4inch barrell nipple, gi 1/2inch barrell nipple, ms 8inch check nutt, ms 6inch check nutt, ms 5inch check nutt, ms 4inch check nutt, ms 3inch check nutt, ms 14inch flanges, ms 8inch flanges, ms 6inch flanges, ms 4inch flanges, ms 3inch flanges, ms 2 1/2inch flanges, ms 2inch flanges, ci 8inch flanges, ci 6inch flanges, ci 4inch flanges, ci 3inch flanges, ci 2 1/2inch flanges, ci 2inch flanges, ci 1 1/2inch flanges, ci 1inch gattu valve, ci 3/4inch gattu valve, ci 1/2inch gattu valve, gi 2inch unions, gi 1inch unions, gi 3/4inch unions, gi 1/2inch unions, ci 3inch foot valve, ci 2 1/2inch foot valve, ci 2inch foot valve, ci 2 1/2inch ball valve, ci 2inch ball valve, brass 1inch ball valve, brass 3/4inch ball valve, brass 1/2inch ball valve, ms 8inch tail piece, ms 6inch tail piece, ms 4inch tail piece, ms 3inch tail piece, ms 2 1/2inch tail piece, ms 2inch tail piece, ci 1inch air valve, ci 3/4inch air valve, ci 1/2inch air valve, steel 3/4inch cock, steel 1/2inch cock, brass 3/4inch cock, brass 1/2inch cock, metal 1inch cock, metal 3/4inch cock, metal 1/2inch cock, gi 1inch plugs, gi 3/4inch plugs, gi 1/2inch plugs, gi 3/4inch - 1inch tee reducer, gi 1/2inch - 1inch tee reducer, gi 1/2inch - 3/4inch tee reducer, gi 2 1/2inch - 3inch reducer, gi 2inch - 3inch reducer, gi 2inch - 2 1/2inch reducer, gi 1inch - 2inch reducer, gi 3/4inch - 1inch reducer, gi 1/2inch - 1inch reducer, gi 1/2inch - 3/4inch reducer, ms 8inch tee, gi 3inch tee, gi 2 1/2inch tee, gi 2inch tee, gi 3/4inch tee, gi 1/2inch tee, ms 9inch end cap, ms 8inch end cap, gi 3inch end cap, gi 2 1/2inch end cap, gi 2inch end cap, gi 3/4inch end cap, gi 1/2inch end cap, ms 9inch bend, ms 8inch bend, gi 3inch bend, gi 2 1/2inch bend, gi 2inch bend, gi 3/4inch bend, gi 1/2inch bend, ms 8inch elbow, gi 3inch elbow, gi 2 1/2inch elbow, gi 2inch elbow, gi 3/4inch elbow, gi 1/2inch elbow, ms 9inch collar, ms 8inch collar, gi 3inch collar, gi 2 1/2inch collar, gi 2inch collar, gi 3/4inch collar, gi 1/2inch collar, ms 9inch pipe, ms 8inch pipe, gi 3inch pipe, gi 2 1/2in

Central Government/Public Sector

CTN :40388050

09 Jun, 2025 NA

Sonbhadra - Uttar Pradesh

Tender For supply of flanges ms 250 mm, pln face , flanges ms 300 mm, pln face , flanges ms 150 mm, pln face

Central Government/Public Sector

CTN :40217857

21 May, 2025 53.35 Lacs

Angul - Odisha

Tender For bid to ras supply of ms flanges - ms pipe flange 100 mm , ms pipe flange 150 mm , ms pipe flange 200 mm , ms pipe flange 250 mm , ms pipe flange 300 mm

Central Government And Public Sector

CTN :40343928

06 Jun, 2025 5.09 Lacs

Jodhpur - Rajasthan

Tender For tender for supply of shifting of pac units from jaisalmer to sardarpura and basni jodhpur - supplying , installing , balancing and commissioning of fabricated at site gss sheet metal rectangular/ round ducting complete with neoprene rubber gaskets , elbows , splitter dampers , vanes , hangers , support as per approved drawing and specifications of 0.63mm thick gss sheet etc complete as required. , supplying , installing , balancing and commissioning of fabricated at site gss sheet metal rectangular/ round ducting complete with neoprene rubber gaskets , elbows , splitter dampers , vanes , hangers , support as per approved drawing and specifications of 0.80mm thick gss sheet etc complete as required. , supplying , installing , balancing and commissioning of fabricated at site gss sheet metal rectangular/ round ducting complete with neoprene rubber gaskets , elbows , splitter dampers , vanes , hangers , support as per approved drawing and specifications of 1.00mm thick gss sheet etc complete as required. , sitc of gi volume control damper complete with neoprene rubber gaskets , nuts , bolts , screws linkages , flanges etc. as per specifications etc complete as reqd.. , supplying & fixing of powder coated extruded aluminium return air grills with louvers but without volume control dampers complete as required. , sitc of 4x16 sqmm pvc insulated pvc sheathed aluminum conductor armoured cable on the existing ms tray /walls with saddles/pvc of cables with glands etc. as required , sitc of 3x2.5 sqmm pvc insulated pvc sheathed copper conductor armoured cable for control wiring on the existing ms tray / walls with saddles/pvc thread/cable tie , screws etc. i/c end termination of cables with glands etc as required. , sitc of 40mm upvc pipe for plumbing work for drainage requirement i/c reducer , elbows , tees , unions , bends , sockets , flanges etc. for making water line connection forvarious package units of system etc. complete as required. , sitc of 20mm upvc pipe for plumbing work for drainage requirement i/c reducer , elbows , tees , unions , bends , sockets , flanges etc. for making water line connection forvarious package units of system etc. complete as required. , sitc of 100mm width x 50mm x 1.6mm thickness size of perforated ms cable tray i/c fabricating i/c horizontal and vertical bends reducers tees , cross members and other accessories as reqd , and duly suspended from the ceiling with ms suspenders and including paint etc. as required. , sitc of 150mm width x 50mm x 1.6mm thickness size of perforated ms cable tray i/c fabricating , horizontal and vertical bends reducers tees , cross members and other accessories as reqd , and duly suspended from the ceiling with ms suspenders and including paint etc. as required. , sitc 25mmx5mm thick g.i. strip for loop earthing on cable tray wall etc complete as required , dismantling & removing the existing laid old power/control cables of booster fans , old package units , condenser units , heaters/pre-heaters system , humidification etc. complete by unscrewing/cutting from the related m.s. racks/tray as required , lowering down the same from different floor to ground floor & shifting the same to the place inside the exchange premises as directed by eng.-in-charge. , dismantling / removing the existing fitted old defective/working/ /worn out 05 nos.package a.c. units with related condensers & accessories like canvas connection , duct damper & place at out side ac plant room at same floor etc as directed by eng.-in-charge. , recovering the existing laid refrigerant piping of old defective/working / worn out hot gas & cold gas of different sizes complete by cutting/unscrewing /opening etc. fitted in between the package unit & condenser unit lowering down the same from different floor to ground floor and shifting the same to the place inside the exchange premises/keeping in safe custody as directed by eng.-in-charge. , dismantling the existing old ducts of pac

corporations/Associations/Others

CTN :40359187

20 May, 2025 NA

Panvel - Maharashtra

Tender For auction sale of ms plate,blind flanges,pizza box

CTN :40212867

17 May, 2025 14.96 Lacs

Bardhaman - West Bengal

Tender For corrigendum : making of 03 nos of 8 inch dia ms pipeline range (welding of flanges, shifting, laying and jointing of pipes) from rvi to outside nallah discharge for smooth dewatering under s.b. project.

Ms Joint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others