Latest ms office 2010 Tenders | Government ms office 2010 Tenders

Central Government/Public Sector

CTN :35630490

28 Feb, 2024 NA

Multi City - Punjab

Tender For corrigendum : set of 2 instrumented wheel sets (4 imws mounted in pairs on each of 2 axles) alongwith the accessories and services shall be supplied for running trials of the prototypes for lhb coaches as per rdso technical document no. tst/tc/pmw/2015/e 18519, dated 15.05.2023, rev.03 (dated 18.10.2023) for the analysis and validation of the developed design and as per rcf-md-ps-2023-5 rev. 1 and special condition of tender supply and commissioning as per annexure-8 of rcf specification rcf-md-ps-2023-5 rev 2 or latest and special terms & conditions as per dy.cple-iii's letter no. rcf/hsq/plg/mpbg/46183 dt. 06/02/2024 [ warranty period: 78 months after the date of delivery ]

Central Government/Public Sector

CTN :36256200

18 Jun, 2024 6.75 Lacs

Daman - Gujarat

Tender For consultancy for preparation of architectural structural design drawings including soil investigation and estimation market analysis of buildings structures for provision of technical building at daman

CTN :36238438

17 Jun, 2024 NA

Liluah - West Bengal

Tender For supply, installation & commissioning of iot enabled coach real time tank(s) water level indicat or with historical data analysis, sms support, real time feedback on water filling and digital twin dashboard for u nderslung water tank in lhb coaches as per attached technical specification . [ warranty period: 30 months aft er the date of delivery ]

State Government

CTN :36005354

14 Jun, 2024 11.00 Lacs

Nagpur - Maharashtra

Tender For corrigendum : supply of library books - hydraulic machines , fluid mechanics for engineers , a handbook of fire workmanship , principles of heat transfer , fundamental of heat and mass transfer 4th ed. , introduction to operational amplifier theory and applications , the art of electronics 2nd ed. , electronic devices 9th ed. , digital logic and computer design , fundamentals of digital circuits , modern digital electronics 3rd ed. , digital electronics an introduction to theory and practice , modern digital electronics 4th ed. , power electronics circuits, devices and applications , power electronics converters, applications and design , fundamentals of power electronics , power electronics essentials and applications , wireless and personal communication systems , principles of mobile communications 2nd ed. , introduction to space time wireless communications , space time wireless communication systems , satellite communications 2nd ed. , satellite communications systems systems, techniques and technology 5th ed. , principles of fire safety standards for building construction , fire stopping book , enclosure fire dynamics , fundamentals of fire phenomena , an introduction to combustion , automobile engineering , automotive mechanics , motor vehicle technology , fundamentals of industrial instrumentation and process control , industrial instrumentation and control 3rd ed. , process dynamics and control 2nd ed , chemical process control an introduction to theory and practice , control systems principles and design , automatic control system , control systems engineering , design of feedback control systems , linear control system analysis and design conventional and modern , instrumentation and control systems , mechanical measurements 6th ed. , process, industrial instruments and controls handbook 5th ed. , electronic instrumentation and measurements 2nd ed. , management , essentials of management , industrial engineering and management , engineering management industrial engineering and management , management 6th ed. , management information systems 8th ed. , operations research , hamilton, boyal and messmani human embryology , morris human anatomy , bainddbridge and mainsions principles of physiology, essentials of human physiology , mcdowell halliburtons handbook of physiology and biochemistry , parson biochemistry in relation to human physiology , burns introduction to biophysics , findlay physical chemistry for students of medicine , wintrobe haematology , ghosh materia medica , burn practical pharmacology , a first course in the finite element method , the finite element method its basis and fundamentals , introduction to mathematical fire modeling , sfpe guide to human behavior in fire , fire dynamics simulator technical reference guide , industrial safety 3rd ed. , industrial safety , industrial fire protection handbook , nfpa 557 standard for determination of fire load for use in structural fire protection design , fire safety management 3rd ed. , occupational health and safety management , industrial safety management , fire and arson investigation , arson investigation , hazard analysis techniques for system , an introduction to reliability and maintainability engineering , probabilistic risk assessment and management for engineers and scientists 2nd ed. , quantitative risk assessment in fire safety , fire protection detection, notification and suppression 2nd ed. , nuclear reactor engineering principles and concepts , elements of nuclear safety , nuclear power reactor safety , nuclear safety , nptelweb course on nuclear reactor technology , principles of occupational health and hygiene an introduction 2nd ed. , hunters diseases of occupation 7th ed. , human factors in engineering and design 7th ed. , industrial and occupational health , handbook of occupational health and safety , safety, health and environment hand book , international occupational hygiene association ioha , vulnerability in disaster discourse ,

Central Government/Public Sector

CTN :36225506

31 May, 2024 8.41 Lacs

Kolkata - West Bengal

Tender For supply of geo technical investigation - mobilization , shifting , drilling , extra drilling , drilling nx ,vane shear test , cbr , undisturbed , disturbed , spt ,water samples , moisture content , atterberg limits ,specific gravity , grain size analysis , direct shear , natural density , consolidation test , unconfined compression test, tri axial test , density test , water absorption , hardness ,point load test , modulus of elasticity , abrasion testing ,ph value , soil ph value , report submission , unforeseen

Central Government/Public Sector

CTN :35973884

27 May, 2024 NA

Krishnagiri - Tamil Nadu

Tender For corrigendum : supply of supply, installation commissioning of toga chromatograph system as per ts and detailed boq. , additional accessories as per ts and detailed boq , amc charges for 1st year as per ts and detailed boq , amc charges for 2nd year as per ts and detailed boq , amc charges for 3rd year as per ts and detailed boq , amc charges for 4th year as per ts and detailed boq , amc charges for 5th year as per ts and detailed boq mse exemption for years of experience and turnover/ ) no startup exemption for years of experience and turnover/ ) . % no document required from seller/ / . certificate (requested in atc),oem authorization certificate,oem annual turnover,additional doc 1 (requested in atc),additional doc 2 (requested in atc),additional doc 3 (requested in atc),additional doc 4 (requested in atc),compliance of boq specification and supporting document *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer bid to ra enabled/ 1 % 3/ 3 no type of bid/ 4 two packet bid primary product category supply, installation commissioning of toga chromatograph system as per ts and detailed boq. bid number/ / ( 5 ): gem/2024/b/4743185 dated/3 : 22-03-2024 bid document/ . 1 / 13 time allowed for technical clarifications during technical evaluation/ < . > 3 days inspection required (by empanelled inspection authority / agencies pre registered with gem)no evaluation method/ < ? total value wise evaluation financial document required/ a . d yes bid details/ emd detail/ advisory bank/ f state bank of india emd amount/ 112146 epbg detail/ advisory bank/ f state bank of india epbg percentage(%)/ 4 (%) 5.00 duration of epbg required (months)/ ij ( ). 15 (a). emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy./ ) k % . 4. % . % 4 f n 1 o (b). emd & performance security should be in favour of beneficiary, wherever it is applicable./ , , q j r 3 beneficiary/ q : fully automatic computer controlled toga (transformer oil gas analysis) gas chromatograph with headspace auto sampler along with essential accessories & post warrantee amc for 5 years at rtdc, hosur s power grid corporation of india limited, yelahanka, bengaluru. (power grid corporation of india limited) splitting/ bid splitting not applied/ 3 . 2 / 13 mii purchase preference/ mii purchase preference/ yes mse purchase preference/ mse purchase preference/ yes 1. preference to make in india products (for bids < 200 crore):preference shall be given to class 1 local supplier as defined in public procurement (preference to make in india), order 2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimum local content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail the purchase preference, the bidder must upload a certificate from the oem regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a company and by a practicing cost accountant or a chartered accountant for oems other than companies as per the public procurement (preference to make-in -india) order 2017 dated 04.06.2020. only class-i and class-ii local suppliers as per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 are

Central Government/Public Sector

CTN :36200759

27 May, 2024 NA

Ambala - Haryana

Tender For data analyser retrieval analysis and printing od data for speedometer of electric locomotive. ma ke: - medha type mrt922 technical specification attached with annexure-a. scope of supply: 1. laser jet pri nter a4 size canon/samsung or equivalent. 2. memory card reader unit for mrt 922. 3. laptop with charger a nd data downloading cables. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :36178233

04 Jun, 2024 NA

Lumding - Assam

Tender For supply of data analyzer 3 retrieval analysis a and printing of data for speedometer of electric locomotives. make medha type mrt 922 or laxvan or telpro or steaslit ltd. or similar scope of supply 1. laser jet printer a4 size hp/canon, 2. memory card reader unit for mrt 922, 3. laptop with charger and data downloading cables. material to be supplied as per technical specification with latest specification. , memory reader unit with usb cable as per aal part no. 3450001000/04 for aal make speedometers. , monochrome laser printer. make-hp/epson/ canon , intel core i5 all-in- one pc with 23.8 inch display/ windows 11 professional. make- hp/dell/ lenovo/asus , small angle grinders, power 220-240v ac 50/60 hz. brand bosch (detailed description/ specification as per product#1 of gem contract no. gemc- 511687783569216 dtd. 06.11.2023) , set of megger (500v & 1000v) make- shanti/ yokins , office table of size 1200x900x750mm made from 18mm thick plpb board with a drawer below for keeping files. lock should be provided and buffers below for ground support , visitor chair. make- eros/ godrej featherlite , locomotive towing equipment , industrial locker cabinet-18 locker code-il/s/18 overall size 78"hx36"wx19 d having 18 lockers, each of size 12"hx12"wx17'd provided with stapple arranegment for pad-locking. ventilating, lovers & handle doors in 20g & other parts in 22g steel sheets with suitable arranegment for dropping of letter make-eros/ , revolving chair with arm tilt working with torsion bar mechanism. make- godrej/ featherlite/ eros/ steel n style , aquaguard ro & uv both ss304 drinking water coolers with built in water purification system. brand: aquaguard (detailed specification as per product #1 of gem contract no. gemc- 511687708587836 dtd. 13.11.2023) , industrial safety helmet is:2925 (detailed description as per product #1 of gem contract no. gemc- 511687708587836 dtd. 13.11.2023) , metal shelving rack (size: 2200mm x 3000mm)

CTN :36156689

18 May, 2024 NA

Mumbai - Maharashtra

Tender For supply of geo technical investigation mob demob charges so , borehole upto 10 m depth , borehole 10 to 20 m depth , borehole 20 to 30 m depth , boring of hard rock , water chemical analysis test , collection of uds soil sample , testing of earth resistivity , field cbr test , testing of peizometer test , natural moisture content sampl , sample for dry and bulk density , grain size and sieve analysis , hydrometer analysis , atterberg limits , specific gravity , unconfined compression test , triaxial cd test , consolidation test , direct shear test , testing compressive strengt , testing of soil cbr , free swelling index , chemical analysis test of soil , prep and sub of report , topographical survey , bench mark -

CTN :36118463

21 May, 2024 NA

Delhi - Delhi

Tender For providing of custom bid for services - assistive service for technical work in 03 lab: work for assistive services : job work 1. assistive services for technical work in nanotechnology lab : activity 1: chemical functionalisation of nanomaterials/hybrid inorganic organic composites, activity 2: chemical synthesis of nanoparticles, metal organic frameworks for biomedical applications and optimization using design of experiment/response surface methodologies , activity 3: physiochemical analysis (bet, dls, sem, edx, ftir, tga, xrd etc) , activity 4: ex vivo analysis for first contact in vivo evaluations, animal handling for in vivo studies , activity 5: management of records and data analysis , job work 2. assistive services for technical work in peptide chemistry lab : activity 1: peptide/small molecule based drug formulation. and their chacterization and purification, activity 2: pre-clinical study of drug formulation (drug release, characterization, haematological and biochemical evaluation etc) , activity 3: design and preparation of pre-clinical pharmacology development strategies, activity 4: practical experience of animal models, animals handling (rodents) and acute toxicity evaluation activity 5: management of records and data analysis, job work 3. assistive services for technical work in tissue engineering and stem cells lab : activity 1: development of scaffold/hydrogel/nanofibers sheets for bone regeneration (material fabrication) using biomaterial and analysis , activity 2: electrospinning and parameter optimization for fabrications strategies to enhance the regeneration process., activity 3: biomechanical properties (tensile, young modulus elasticity etc), swelling, degradation study of the material , activity 4: isolation and maintenance of stem cells culture (mscs,), functional assays like mtt, cell proliferation, migration on developed material, activity 5: flow cytometry, uv-vis spectroscopy, fluorescence microscopic evaluation, molecular techniques such as rna/protein isolation, cdna synthesis and rt- pcr..

Ms Office 2010 Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector