Latest ms pipe Tenders | Government ms pipe Tenders

Corporations/Associations/Others

CTN :40348791

29 May, 2025 2.42 Lacs

Kudachi - Karnataka

Tender For providing, laying and fixing of ms pipe, valves along with allied accessories at wtp kudachi water supply.

State Government

CTN :40495651

10 Jun, 2025 NA

Pune - Maharashtra

Tender For providing supplying and erecting various different electric material for 1 year at grampanchayat(fund) - electric material for 1 year, 11/4" gi pl pipe, 3/4 " gi pl pipe, g.i.pipe 1-2, g.i.pipe 1*1/2"r, 1.5mm polycab 90mtr, 1.5sqmm 3c cu flex wire, 16*4 c alu armd cable, 2.5 mm polycab /syska 90mtrs, 4.0 sq mm service wire heavy, 4 mm polycab 90 mtr, 6 sqmm x 2 c service wire, g.i.wire, wire 16sq mm 4c alu arm, 120w led driver 10amp, led chip 100w, led chip48w, led chip 50w, led driver 100w, led driver 36w, led driver 48w, led driver 60w, led driver 65w, mcb 63am/2p, mcb box 2way, mcb single pole, mcb s.p 40amp, meter box 2*2.5 gi, mnx45 240v contactor, mnx 50 contactor coil, mnx50 contactor l & t, 32amp single pole main switch, 50w led flood light, led flood 100w, led street light s40 30w, 1 x 36 lx pl street light fitting, 2 x 36 w pl alu fitting, led lamp 45w, led pll 18w, led solar street light 40w, led streetlight 36w, led streetlight 50w, 63a kitkat fuse, 63 amps /415 v smtp main switch, 48" ceiling fan, ballast 36/40w destello electronic, battery 12v, busbar 200a/415v, cable tie 100 mm, cable tie 300mm, crement pole clamp, fan 16 wallfan cromton, fan 24 crompton celling, finolex pl 36w cdl pl tube 36w 4 pin, flood light 100w, gic qt timer, hallogen fitting 500w, hallogen lamp 500w, halonix led lamp 09w, halonix led lamp 20w, halonix led lamp 50w, holder porcelain e27, holder pvc 36w pl, led streetlight 36w, led street light 48w, kit kat fuse 16a/415, led batten 20w, led batten 36w, plier 8" taparia, pvc tapes/g 8mtr, rawal plug 25*8, rawal plug 35*8, screw 25*8, screw 35*8, screw 75*8, service insulator, sholder gun, sholder pest, sholder wire, streetlight 1*36 cfl eco, t-5 clip, taparia tester 813 yellow, timer for street light, tourch rechargable, 5meter ms pole, 7meter ms pole, 9meter ms pole, streetlight pole bracket single arm, streetlight pole bracket double arm, streetlight pole bracket junction box, pl tube light 4 pints lamps, 36 w choke pl osaram 4 pins, 36 w led bulb, 18 w led bulb, 15 w led bulb, 40 w led bulb, 2 core service wire 6mm, mnx 50 contactor l&t, coil for mnx 50 l&t, 2 core service wire 4mm, 50 w led bulb threded, panle box gi single dore 1.5*2, panle box gi double dore 2.5*2, 6 amp 5 pin socket, 6 amp switch, fan dimer socket type, board modle 4*4, board modle 8*8, board modle 8*16, 10 mm 4 aluminium armand cable, 3.5 mfd kadser, mcb 32 amp/2p, led flood 250w, pvc pipe 1", wall can, battery 100 amp, main switch 63 amp 3 pole, kit kat fuse 63 amp, kit kat fuse 32 amp, 16 meter ms pole, 30 w led repair, 36 w led repair, 48 w to 50 w led repair, 70 w to 75 w led repair, 100 w led repair, 75 w flood light repair, 100 w flood light repair, 125 w flood light repair, 150 w flood light repair, supplying and erecting m.s. pipe pole b grade 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. oh-pl/gip+b131:b141, making cement concrete foundation including excavation (60 * 60 * 150) cm deep in 1:3:6 cement concrete 20 * 25 mm stone metal, (45 * 45 * 45) * cm / 45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (above 6 m to 9 m poles), supplying and erecting led street light fitting suitable for above 70w-75 lamp, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete per specification no fg-odf/fls, providingt and erectinggalvanised 1000mm single arm sword type bracket with frp dome and ball as per specification no. oh-pl/pbkt, supplying, erecting & making dpmcb 6 a to 32 a in provided distribution board, supplying and erecting mains with 2x 2.5 sq mm frlsh copper pvc insulatedwire laid in prouied candot/trunking/insidepole/busbor or any other place as per specification wg/ma/bw, providing pipe type earthing with 40mm dia. gl pipe or 20mm dia. gi rod complete with all materials, supplying and erecting mains with isi mark

State Government

CTN :40486288

02 Jun, 2025 78.71 Lacs

Delhi - Delhi

Tender For construction of rcc drainage system at road no.40 service road from inderlok subway to near inderlok metro station gate no.4 and laying m.s. pipe 600mm dia by jack pushing technology from near inderlok metro station gate no. 4 to nirankari bhawan....

Central Government/Public Sector

CTN :40511976

12 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply of ladder trolley complete set generally confirming to rdso specification no. tm/sm/465 dated 03.02.2014 (rev 01 of2020) enclosed with following minor deviations. 1. each trolley set comprises of (1) wheel and axle 2 nos. (2) detachable frame- 1 no. and foldable ms ladder-1 no. 2. the wheel and axle set , frame for the trolley and the ladder for the trolley shall be as per the drawing enclosed. 3.the materials especially steel used for fabrication of wheel and axle should confirm to relevant standards wherever appli cable. only isi marked, branded ms pipe should be used for fabrication of ladder. the finished ladder shoul d be given one coat of anti-corrosive painting 4.seating arrangements, any arrangement for tool box are no t required in the trolley though mentioned in the rdso specification. 5. where there is any minor deviation in the dimensions between the drawing and the rdso specification is noticed if any, the dimensions in the enclosed drawing shall be adopted. 6. suitable insulating pad or similar insulating material should be provi ded in the axle such that the two wheels of the axle are not electrically shorted. 7. inspection will be carried out by consignee either at firm's premises or after receipt of the material. tenderers shall specifically note that the trolley requires to be field tested and any minor alterations/modification required for the same sho uld be carried out at the field by firms representatives in co-ordination with consignees after effecting the s upply. encl: 1. rdso specification no.tm/sm/465dt.03.02.2014 (rev 01 of 2020) 2. drawing no. m/trd/sk/ 589. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40503851

03 Jun, 2025 NA

Bangalore - Karnataka

Tender For auction sale of scrapped rubber hose pipes with brass end couplings,scrapped fire extinguishers,scrapped chairs,steel rack,scrapped chain link fencing,scrapped ms water pipes,scrapped electric light poles,scrapped pump/motors,scrapped vehicle,disposal of scrapped weigh bridge,miscellaneous electrical scrap,scrapped aluminium cables,scrapped copper cables,air receiver,scrapped ms pipe sections,scrapped ms chain conveyor sections,scrapped equipment,scrapped m s angles and pipes,damaged retail outlet rvi material,disposal of scrap cylinders in crushed condition

Co-operative

CTN :40475982

02 Jun, 2025 5.35 Lacs

Jaipur - Rajasthan

Tender For 12 g choti gss godawn consttruction item - profile sheet 0.8 mm th isi marked (with zinc coating not less than 275 gm/sqm , plan sheet .8 mm th isi marked (with zinc coating not less than 275 gm/sqm-(guter sheet), , 3" dia round ms pipe (isi marked), , 1.25" dia round ms pipe (isi marked), , 1.5 "x3" rectanglar ms pipe marked) (isi, , angle 2.5"x2.5"x1.5 soot th or 65mmx65mmx5mm), , screw 12x55 no 2.25" long with washer, , welding rod 10no, , enamel paint black (isi marked), , cement paint (snowcem), , white wash (lime), , roller shutters of approved make, made of 80 x 1.25 mm. m.s. laths interlocked together through their entire length, inside and outside locking with push and pull operation,including cost of spring hooks, wire spring grade no. 2 and m.s. top cover 1.2 mm thick, , window (z section + mullion), , ventilator (z-section), , steel sq bar, , unplasticzed poly vinal chloride (upvc)pipe type b (is13592 :1992 marked) 110 mm dia, , unplasticzed poly vinal chloride (upvc)pipe type b (is13592 :1992 marked) 110 mm dia bend, , cutter wheel (5")

Co-operative

CTN :40476121

30 May, 2025 5.30 Lacs

Jaipur - Rajasthan

Tender For 94 takhthajra gss ltd godawn item construction item - profile sheet 0.8 mm th isi marked (with zinc coating not less than 275 gm /sqm , plan sheet .8 mm th isi marked (with zinc coating not less than 275 gm/sqm, , 3 dia round ms pipe (isi marked), , 36 on, , 14, , 1.25" dia round ms pipe marked) (isi, , 1.5"x3" rectanglar ms pipe (isi marked), , 12, , 80, , 8, , w, , angle 2.5"x2.5"x1.5 soot th or 65mmx65mmx5mm), , screw 12x55 no 2.25" long with waser ( make tata), , welding rod 10 no, , cement paint (snowcem), , white wash (lime), , enamel paint black (isi marked), , ventilator (z-section), , window (z section + mullion), , steel sq bar, , roller shutters of approved make, made of 80 x 1.25 mm. m.s. laths interlocked together throgh their entire length, inside and outside locking with push and pull operation, including cost of spring hooks, wire spring grade no. 2 and m.s. top cover 1.2 mm thick, , air fan 24" dia with fiber sheet base, , unplasticzed poly vinal chloride, , (upvc) pipe type b (is13592:1992 marked) 110 mm dia, , unplasticzed poly vinal chloride, , 10 (upvc) pipe type b (is13592:1992 marked) 110 mm dia bend

State Government

CTN :40501476

09 Jun, 2025 NA

Hamirpur(Hp) - Himachal Pradesh

Tender For drilling,lowering of assembly and development of tubewell 90m deep dth method including chamber and with mserw pipe casing along with lift irrigation components under hpcdp p-ii jica-oda