Latest ms plate Tenders | Government ms plate Tenders

Central Government/Public Sector

CTN :38190254

21 Nov, 2024 NA

Ghaziabad - Uttar Pradesh

Tender For supply of ms plate for brake shoe as per drg no. d/bg- 1753/2 grade -a and is 2062. [ warranty per iod: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38208978

22 Nov, 2024 NA

Kota - Rajasthan

Tender For supply of m.s. plate, size: 6300 x 1400 x 8 mm gr- e250a cu (sk) as per spec. no. is:2062/201 1 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38005126

18 Nov, 2024 45.72 Lacs

Mundra - Gujarat

Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

CTN :38191367

02 Dec, 2024 NA

Jamalpur - Bihar

Tender For supply of ms plate of size 25xswxsl mm to specification is: 2062:2011 e 250 a with cu. [ warranty period: 30 months after the date of delivery ]

CTN :37721881

15 Nov, 2024 NA

Gorakhpur - Uttar Pradesh

Tender For corrigendum : supply of ms plate 45 mm x 2500 mm x 12500 mm, is: 2062-2011 quality-a grade, designation-e-250, killed & norma

CTN :38176189

02 Dec, 2024 NA

Tawang - Arunachal Pradesh

Tender For accs for rd construction - thermocol having 10 kg per cum density , dimensions 1 m x 0.5 m x .025 m , rope manila 2 inches dia at 1.52 kg per m , rope manila 1.5 inch at 0.848 kg per m , rope manila 0.50 inch at 0.104 kg per m , nylon rope 0.50-inch dia at 10m per kg , ms plate 5 mm thick 8 ft x 4 ft , ms square bar 12 x 12 mm , hexagonal bolt and nut size -16 x 10.9 x 50mm for shuttering purpose , tullu pump , 1hp , suction pipe for 1hp tullu pump 1 inch dia 20m long , foot valve for 1 inch suction pump , non-recording type rain gauge , standard rain gauge with graduated glass of accuracy 0.1mm , digital infrared thermometer - with -38 degree c to 520 degree c temperature range & ip 20 , high precision wheel odometer - 5 digit mechanical counter with quick reset button. , vibrator roller , drum width-600mm , vibration frequency-75hz , amplitude-0.5mm , oil filled radiator heater 2900w , room heater 1500 watts oscillating quartz heat pillar room heater with fan , red color tower type with 2 rods , tile cutter for cutting granite tiles 1 , 200w , 12 , 000 rpm , 110 mm saw blade dia. , ergonomic handle , disc-blade for tile cutter 110 mm , steel cutter electric angle grinder with disc diameter 180 mm , 200w , 8 , 500 rpm , steel cutter electric for metal cut off , 400w , cutting disc 355 x 25.4 mm , lamination machine a3 size , hot and cold , oper temp 80 to 180 degree c , steel cutter blade 180 mm , ddl adhesive

CTN :36910735

14 Nov, 2024 NA

Nagpur - Maharashtra

Tender For bid to ras supply of en24 round bar dia 100 mm , en24 round bar dia 120 mm , en24 round bar dia 150 mm , en24 round bar dia 30 mm , en24 round bar dia 35 mm , en24 round bar dia 45 mm , en24 round bar dia 60 mm , en24 round bar dia 65 mm , en24 round bar dia 75 mm , en24 round bar dia 80 mm , en24 round bar dia 90 mm , en47 round bar dia 45 mm , en47 round bar dia 55 mm , en47 round bar dia 70 mm , en8 round bar dia 30 mm , en8 round bar dia 32 mm , en8 round bar dia 35 mm , en8 round bar dia 45 mm , m.s. flat 100 x 6 mm , m.s. flat 40 x 6 mm , m.s. angle 65 x 65 x 6 mm , m.s. channel 75 x 40 x 4.8 , m.s. plate 10 mm thk , m.s plate 25 mm thk , m.s plate 8 mm thk , gun metal od 65mm x id 30mm x l 300mm , al rod grade dia 50 mm , al rod grade dia 70 mm

CTN :37347394

14 Nov, 2024 NA

Sriharikota - Andhra Pradesh

Tender For bid to ras supply of 100mm mild steel channel , 150mm mild steel channel , 200mm mild steel channel , 250mm mild steel channel , 1.6mm thick mild steel plate , 2mm thick mild steel plate , 4mm thick mild steel plate , 5mm thick mild steel plate , 6mm thick mild steel plate , 8mm thick mild steel plate , 10mm thick mild steel plate , 20mm thick mild steel plate , 32mm thick mild steel plate , 6mm thick m s chequered plate , 50mm mild steel angle 50x50x6 mmx6m long , 45mm mild steel angle 45x45x6 mmx6m long , 40mm mild steel angle 40x40x6 mmx6m long , 30mm mild steel angle 30x30x5 mmx6m long , 25mm mild steel angle 25x25x3 mmx6m long , 25mm mild steel hollow tubes 25x25x3 mmx6m long , 35mm mild steel hollow tubes 35x35x3 mmx6m long , 50mm mild steel hollow tubes 50x 50 x4 mmx6m long , 60mm mild steel hollow tubes 60 x 60 x5 mmx6m long , 75mm mild steel hollow tubes 75 x 75 x5 mmx6m long , 100mm mild steel hollow tubes 100x 100 x6 mmx6m long

CTN :38113878

18 Nov, 2024 NA

Tuticorin - Tamil Nadu

Tender For supply of 6 mm. thick m.s. plate for unit iv & v airpreheater and flue gas duct, as per is 2062 note :1. d.d. towards postal charges for obtaining enquiry by post shall be drawn in favour of se/p&a/ttps payable at tirunelveli.2. prospective bidders may get the specification free of cost by down loading from websites. tnpgcl www.tangedco.gov.innic https://tntenders.gov.in/nicgep/apptender opening (electronically) :o/o. the superintending engineer/p&a/ttps tuticorin.(executive engineer/mm/ttps)

Central Government/Public Sector

CTN :38191336

20 Nov, 2024 NA

Multi City - Multi State

Tender For supply of electric point machine rotary locking type, high thrust 220 mm throw, ac immunity 160 v ac , non trailable to operate on 110v dc completed with lock detector slides, cable termination box as per rd so specification no.irs: s:24/2002 amendment 1 or latest as per drg. no. rdso/s-11000 and rdso/s-3395 . the point machine and ground connections are as per drawing no. mentioned in rdso's letter no. sts/e/ pm/220 mm vol-ii dated 25.01.2023. ground connection shall be as per rdso drawing no. rdso/s-3454 al t.-a consisting of (i) 1 in 12 turn outs bg 60 kg on prestressed concrete sleepers fitted with irs point machi ne ( 220 mm throw) for independent switch locking and clamp point lock (160 mm throw of point) with p-br acket as per drawing no. rdso/s-3454 alt.-a (ii) facing point bg switch extension bracket/insulation plate l eft hand and right hand as per drawing no. rdso/s- 3591-3592-3593 (iii) facing point bg detector rod far end/near end as per drawing no.rdso/s-3594-95 (iv) facing point bg lock rod far end /near end as per dra wing no. rdso/s-3596-97 (v) detector rod lug and lock rod lug as per drawing no. rdso/s-3598 (vi) special ms plate for s&t fittings on psc sleepers as per drawing no. rdso/t-3901 (vii) clamp type lock 60kg (tws) -bg-bolt special head as per drawing no. rdso/s/3599 latest alteration if any are applicable. one set of tool s in a suitable tool box shall be supplied of point machines consisting of (i) m6/m8/m18/m22/m20 box spann ers (ii) m10/12 spanners (iii) adjustable wrench (iv) screwdriver 300 mm long. [ warranty period: 30 mon ths after the date of delivery ]

Ms Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector