Latest ms sheet Tenders | Government ms sheet Tenders

corporations/Associations/Others

CTN :42723701

10 Dec, 2025 1.50 Crore

Kumbakonam - Tamil Nadu

Tender For revamping civil infrastructure -construction of crew rest room, canteen building, office building, and toilet room, providingcement concrete in front of m-shed in tnstc depot at pattukkottai branch in pudukkotail region - towards the hire charges for leveling the heavy undulation portion with using jcb as per the direction of the departmental officers.,the rate including conveyance, fuel, driver charges, providing and laying, spreading and compacting graded stone aggregates to wet mix macadam 300mm thick specification including premixing the materials with water at omc in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base/base course on well prepared surface and compacting with vibratoy roller to acheive the desired density including cost of material, labour charges,rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of morth rev-5supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the corporation officials., dismantling the old damaged building and within the compound in places shown by the departmental officers and clearing and levelling the site, etc.,, brick / stone masonry in cement mortar walls under 3m high, corrugated iron sheet roofing over pan tiles without roof timbers, earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., supplying and filling in foundation and basement with river sand in layers of 15cm thick well rammed and consolidated complying with standard specification etc., complete, supply with serenely gravel in layers of not exceeding 15cm thick including watering well ramming and deconsolidation etc complete, cement concrete 1:5:10 (one cement, five sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification ( the rate is inclusive of necessary planking for panelling whereever necessary and as directed by departmental officers), plain cement concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers., steel centering to the sides and of all the rcc works such as lintel waist slab, beams, floor slab, roof slab and other simulation work with necessary strut and cross bracing including removing the same of curing time of concrete without damaging the rcc works in all floors up to 4.5m height etc. complete as per tnsps., supplying, fabricating and placing in position mild steel / ribbed tor steel grills for all rcc works as per design given including cost of steel and g.i. binding wire in all floors etc. complete complying with standard specification. (contractor has to make his own arrangements for the supply of steel and binding wire), brick work using country bricks of size 9" x 4-3/8" x2-3/4" in cement mortar 1:5 (one cement and five sand) including curing neat finishing, etc., complete complying with standard specifiction complete., rate for foundation & basement, rate for super structure, reinforced cement concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all rcc items of works excluding cost of reinforcement grill and fabricating charges, centering and shut

corporations/Associations/Others

CTN :42721109

26 Nov, 2025 2.21 Crore

Tiruchirappalli - Tamil Nadu

Tender For manufacture, fabrication, supply,erection, testing and commissioning with 1x8 mva pr.tr,stn transformer, associated equipments, accessories, control panels, control room and electrical works at o.krishnapuram in trichy metro under tkc thro e tener - electrical material supply, power transformer 33/11kv, 8mva power transformer with oltc, breaker along with ct for outdoor ss 33 kv (gc) vcb (out door) 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (600-300/1-1a) with structure and complete accessories with breaker platform., 11kv (lv) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulatedwith permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (1200-600/1-1a) with structure and complete accessories with breaker platform., 11kv (feeder) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (400-200/1-1a) with structure and complete accessories with breaker platform., potential transformer 33kv potential transformer with tc (single phase unit), 11kv potential transformer with tc (three phase unit), panels ac panel for 33kv ss, 110 v dc annunciation panel type b, 110v dc indoor c&r panel for gc breaker, 110v dc indoor c&r panel for lv breaker, 110 v dc indoor c&r panel for twin feeder, control cables, junction box and accessories 14c x 2.5 sq.mm copper cable armoured, 8c x 4 sq.mm copper cable armoured, 4c x 4 sq.mm copper cable armoured, 4c x 2.5 sq.mm copper cable armoured, 2c x 2.5 sq.mm copper cable armoured, isi mark 19 / 22 mm cable gland as directed by the field engineer., isi mark 25 mm cable gland as directed by the field engineer., isi mark cable 28 mm gland as directed by the field engineer., lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination, supply of gi chequerred plate 6mm thickness, junction box supply of ct/pt junction box made out of 14swg (2mm) m.s.sheet wherever required as directed by the field engineer. the box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials. 400w x 300h x 150d, supply of ac junction box of size 535x310x127mm of 18swg ms sheet including hrc fuse unit-18 nos. should be fitted with base, consumables etc. (the box shall be vermin proof, shall have sturdy hinges and locking arrangements), supply of mounting channel suitable for cbtm 5 terminal block in panel /box as required and as directed by the field engineer., supply of disconnected type terminal block suitable for ct circuits in panels/ box as required & as directed by the field engineer, supply of isi mark bakelite hrc fuse holder with fuse of 2/5/10/16 amps reputed make in panels/ boxes for ac/dc/pt circuits wherever required as directed by the field engineer. 16 amps - fuse holder with hrc fuse, 63amps - fuse holder with hrc fuse, bus & bus materials zebra acsr conductor, 2.0" / 50 mm aluminium bus bar (thickness:5 mm), 22/33 kv pt insulators, 11kv pt insulator, 11kv, 120kn disc insulators (antifog), strung bus eye bolt of 18 - 20 mm dia gi rod of required length suitable for 33kv, 22kv and 11kv strung bus including cost of gi rod and 2nos gi nuts & washer as directed by the field engineer., clamps and connectors tension fitting clamp 4 bolted for zebra, t clamp for 2" bus to single zebra, t clamp for zebra to zebra, switchend clamp for single zebra, switchend clamp for 2" busbar, reducer clamp for 2" bus to zebra, pg clamp for zebra, free end clamp for 2"busbar, corana bell for 50mm bus bar, switch end clamp for mink, seating block for 2" bus bar(for giving elect co

Central Government/Public Sector

CTN :42737833

11 Dec, 2025 NA

Hyderabad - Telangana

Tender For supply of hot rolled ms sheet 1500* 2500* 3 mm, grade e250a, is: 2062-2011 , hot rolled ms sheet 1500* 2500* 4 mm, grade e250a, is: 2062-2011

CTN :42735276

20 Nov, 2025 NA

Darrang - Assam

Tender For supply and delivery of gi corrugated sheet at ipps-3 project site sipajhar darrang assam

CTN :42760030

02 Dec, 2025 15.00 Lacs

Siang - Arunachal Pradesh

Tender For supply of anabond gaskert rtv 65 red medium size , fevi quick 20 gm , araldite 36 gram tube , m seal 100 gram , thread tape oblique tefflon tape 10 mtr , brass rod 10mm dia , brass rod 20mm dia , brass rod 30mm dia , brass rod 40mm dia , brass rod 50mm dia , ms round bar 25 m , ms round bar 30 m , ms steet 2400mm by 1200mm by 1mm , ms sheet 2400mm by 1200mm by 3mm , ms sheet 2400mm by 1200mm by 5mm , ms sheet 2400mm by 1200mm 6mm , angle iron 25mm by 25mm by 3mm , angle iron 25mm by 25mm by 4mm , angle iron 35mm by 35mm by 5mm , angle iron 50mm by 50mm by 6mm , ms flat 25mm by 3mm , ms flat 25mm by 4mm , ms flat 40mm by 6mm , spring washer 10mm id , spring washer 11mm id , spring washer 12mm id , spring washer 13mm id , spring washer 14mm id , hose clamp 15mm size , hose clamp 25mm size , hose clamp 50mm size , hose clamp 75mm size , hose clamp 100mm size , copper benjo washer 12mm pkt of 100 nos , benjo washer inner dia 17mm pkt of 100 nos , benjo washer inner dia 10mm pkt of 100 nos , benjo washer inner dia 19mm pkt of 100 nos , benjo washer inner dia 14mm pkt of 100 nos , plain washer 10mm size , plain washer 12mm size , plain washer 14mm size , pain washer 16mm size , plain washer 18mm size , plain washer 20mm size , soap yellow , cotton waste superior quality , rear oblique side view mirror with complete fitting for all model vehicles , horn 12v for maruti gypsy , horn 24 v for all veh , battery terminal plus light duty , battery terminal minuslight duty , battery terminal plus ve heavy duty , battery terminal minus ve heavy duty , battery cable plus size 16 mm , battery cable minus size 16 mm , loom tape pvc , battery thimble 18 mm heavy duty , battery thimble 16 mm heavy duty , battery thimble 13 mm small , battery thimble 12 mm small , male female thimbles 2 pt 5 mm comma 4 pt 8 ) /bid number: gem/2025/b/6892760 * /dated: 14-11-2025 & & / bid document1 / 69 & & ' ' /item category mm , battery pole lead , crocodile clip , lt wire 1 pt 5 sqmm , lt wire 2 pt 5 sqmm , lt wire 4 pt 0 sqmm , lt wire 10 sqmm , micro relay 4 pin 12v , micro relay 4 pin 24v , micro relay 5 pin 24v , micro relay 5 pin 12v , insulation tape 10 mtr long , insulation tape 25 mtr long , micro fuse 5 amp comma 10 amp comma 15 amp comma 20 amp comma each 25 , bulb single 21w comma 9w comma 2w , bulb double 21w , ingnition switch , push button , sleeve silicon for wire 4mm dia and 45mm length , ply wood 8 ft by by 4 ft by 12 mm , ply wood 8 ft by 4 ft by 6 mm , u form 4 inch by 6 inch by3 inch density 40 , u foam 3 inch by 6 inch by 4 inch density 40 , rexine white 1 pt 5 mtr , thread no. 30 black each roll 900 mtr , thread no 20 og , dentrite , velcro 1 inch bealcron 1inch , multipurpose machine oil , gas regulator oxygen , gas regulator actlene , gas cutter make , gas nozzle a8 , gas nozzle a12 , gas nozzle a16 , rubber hose for gas welding heavy duty colour red , rubber hose for gas welding heavy duty colour blue , gas pipe clamp 1inch , gas brazing flux , gas brazing rod brass no 1 pt 5 mm , gas brazing rod brass no 3 mm , gas welding ms rod copper no 1 pt 5 mm , welding ms rod copper 3 mm , drill bit 12 pcs set , green grinding wheel 150 by 25 by 25 , rough grinding wheel 150 by 25 by 25 , grinding wheel silicon carbide 150mm by 3mm by 16 pt 5mm for angle grinder model 35100 ralli wolf , grinding wheel for cutter 355mm by 3 pt mm by 25 pt 4mm dia , grinding stone silicon carbide smooth for bench 150 mm by 25mm by 31pt 75 mm make compass , grinding stone roughsilicon carbide for bench 150mm by 25mm by 31 pt 75 mm make compass , welding apron , hand gloves leather set , spark lighter , measuring tape 5 mtr , welding screen , welding glass black , welding glass white , key for gas cylinders , distiled water , multi purpose rust spray 450 ml

CTN :42597684

18 Nov, 2025 NA

Aligarh - Uttar Pradesh

Tender For corrigendum : supply of spair parts - backhoe loader (mahindra) filter kit, excavator loader jcb 20 filter kit, load on crane jcb filter kit, tata ace filter kit, tractor (new holland) filter kit, tractor (eicher) filter kit, excavator loader tmx- 50 filter kit, excavator loader (tata hitachi) filter kit, backhoe loader 3 dx filter kit, backhoe loader ace filter kit, tractor loader (john deere) filter kit, skid steer loader (bactra) filter kit, skid steer loader (bobcat) filter kit, nala cleaning machine (leyland) filter kit, hydraulic tipper (tata-1613) filter kit, tractor (power track) filter kit, compactor (tata 1613) filter kit, dumper pressure (eicher) filter kit, small tractor (mahindra) filter kit, trolla (tata) filter kit, hydraulic trolley jack 05 ton capacity, tractor umbrella complete, small tractor umbrella complete, backhoe loader teeth (front/rear) set complete, vehicle lifting jack-10 ton, portable welding machine, tractor (eicher-312) bearing 31305 (nbc/skf), tractor (eicher-312) bearing 31207 (nbc/skf), tractor (mahindra-265) bearing 30205 (nbc/skf), tractor (mahindra-265) bearing 30207 (nbc/skf), tractor (sonalika) bearing 30305 (nbc/skf), tractor (sonalika) bearing 32207 (nbc/skf), tractor (eicher-312) engine overhauling kit, tractor (mahindra) engine overhauling kit, tractor (eicher) front axle spindle, trolley hub 7.50x16, tata hyva clutch kit set, tractor (eicher) fan belt-48, tractor (mahindra) fan belt, tata ace (fan belt with teeth), backhoe loader (mahindra) filter kit, hyva tipper filter kit, tata ace clutch cylinder (upper/lower), tampo tipper tata ace clutch set, road sweeping ready con brush set, tractor (mahindra) clutch set, tractor (eicher) clutch set, tata ace sound system, section pipe 4 inch (pbc), section pipe 3 inch (pbc), rickshaw front wheel rim with tire (solid rubber), rickshaw rear wheel rim with tire (solid rubber), rickshaw wheel bearing, rickshaw handle, skid steer loader rim (10.16.5), tampo tata ace rim (145.80.12), hydraulic trolley rim (7.50 .16), backhoe loader front bucket 6 in 1 multi-purpose, backhoe loader front wheel bearing (tata hitachi), tata ace engine overhauling kit, tractor (sonalika) engine overhauling kit, mechanic loader filter kit escort, thrust bearing (eicher), sheet 12 gauge ms, sheet 10 gauge ms, sheet 16 gauge ms, checker sheet 8 gauge ms, sheet 08 gauge 2 inch ms, angle 1.5 inch 2 strand ms, angle 1 inch 2 strand ms, channel 4x6 inch ms (3x), channel 5x6 inch ms, channel 2 inch 6 strand ms, channel 4x6 inch ms, backhoe loader front wheel bearing (nbc/skf), skid steer loader front wheel bearing (nbc/skf), hydraulic pipe 5 ton capacity trolley (nbc/skf), hydraulic pipe shovel bucket, nut bolt various sizes, welding rod packet (10 nos maruti company), welding rod packet (12 nos maruti company), welding rod packet (16 nos maruti company), welding rod packet steel (10 nos maruti company), welding rod packet steel (10 nos maruti company), mobile toilet tap plastic, mobile toilet seat, tractor hitch, trolley hook, rim 16.9 x28, rim 12.4 x28, rim 1000x20, dustbin capacity 10 liter, tata ace radiator, tractor (mahindra) radiator, tractor (new holland) radiator, tractor (sonalika) radiator, tata-709 radiator, excavator (mahindra) loader radiator, excavator (tata hitachi) radiator, excavator bm radiator, rim (600x16), asbestos jetting pipe, backhoe loader hydraulic pipe 514, oxygen cylinder, lpg cylinder, mechanic loader 3 kg front wheel bearing, hydraulic trolley bearing-32213 (nbc/skf), hydraulic trolley bearing-32214 (nbc/skf), hydraulic trolley bearing-32216 (nbc/skf), hydraulic trolley bearing-32212 (nbc/skf), gas cutter pipe, welding lead, welding goggles, air compressor pipe, hyva tata 1518 ultra diesel filter kit, tampo (tata ace) water body, tractor (sonalika) water body, tata (709) water body, tractor (new holland) water body-fan belt, tractor (mahindra) water body, driver seat, hammer chisel, spanner set various sizes, wrench set, diesel pipe tractor mahi

CTN :42720496

27 Nov, 2025 NA

Vyara - Gujarat

Tender For supply of ms sheet as per is 1079 (q3)

CTN :42703143

18 Nov, 2025 8.72 Lacs

Dharuhera - Haryana

Tender For construction of floor, side ms sheeting and other work of garbage collection point on sohna road in ward no. 4 in mc dharuhera.

CTN :42457315

15 Nov, 2025 1.00 Lacs

West Kameng - Arunachal Pradesh

Tender For corrigendum : supply of wheel cutter 4 inch , wheel cutter 14 inch , wheel grinder 4 inch , welding rod , ms sheet 18 gage , ms sheet 16 gage , flat patti 3mm , flat patti 5mm , foam sheet 4 inch , oil filter , fuel filter

CTN :42707624

21 Nov, 2025 95.0 Thousand

Jalpaiguri - West Bengal

Tender For supply of benjo washer , washer steel bolt 14mm , nut and bolt , nut with bolt , bolt metrics , clip c small , foam sheet high density 2mm , carburetor cleaner , welding iron , abrasive cloth emery , packing tape , lt wire , ms sheet 4 x 8 18 g , fuse grip

Ms Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector