Latest ms sign board Tenders | Government ms sign board Tenders

Corporations/Associations/Others

CTN :40114272

06 May, 2025 29.45 Lacs

Dondaicha - Maharashtra

Tender For erected sign board of various colony and road

State Government

CTN :40145668

06 May, 2025 1.05 Crore

Thrissur - Kerala

Tender For pot hole filling 36mm, pot hole filling 12mm , bc overlay, traffic safety measures, provision for road marking with thermoplastic paint, fixing road studs for smooth drive-in night hours, fixing reflective tile, studs, fixing sign board, caution

CTN :40141352

17 May, 2025 NA

East Sikkim - Sikkim

Tender For supply of road furniture - solar delinator solar edge indicator size 1200 mmas per irc 67 2022 technical details of solar guide posts made of mild steel of 75 76 od and 1.5mm thickness with pure polyester powder coating with the minimum thickness of powder coating of not less than 60 micron for protection against corrosion. the surface should be concealed so that there should not be any exposed surface without powder coating. the posts should have a circular design with the height of 900 mm above the ground and 300mm base underground total 1200mm.the guide post shall have 8 red leds on equalivant gap total 48leds for brighter viewing of the motorists in fog. the leds shall start blinking as it gets dim. the solar delineator shall have solar panel on top of the surface for recharging. further it should have 2 strips of 150mm each of type xi sheeting specifications as per irc 67 and astm d 4956 which would ensure to obtain clear visibility of the road alignment during night time also. , delinators size 1200mm as per irc 67 2022 roadway indicators as guide poles guide posts made of mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion the surface should be concealed so that there should not be any exposed surface without powder coating the posts shall have an ellipsoidal design with the height of the pole shall be 900 mm above the ground with about 300mm base which can be anchored onto the ground as per irc 79 2019 mild steel guide poles shall conform to type 11 reflective sheeting specifications as per irc 67 2022 and astm d 4956 which would ensure to obtain clear visibility of the road alignment during night time to achieve enhanced visibility of the curved portion of the road guide poles shall have substantial area allocated to exihibit alternate band of black paint and white retroreflective sheeting the above arrangement shall be in place in both sides of the poles in the case of undivided carriageways having sharp curves as per fig 1 of irc 79 2019 , delinators size 900 1000 mm as per irc 67 2022 roadway indicators as guide poles. guide posts made of mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion. the surface should be concealed so that there should not be any exposed surface without powder coating. the posts shall have an ellipsoidal design with the height of the pole shall be 800 mm above the ground with about 200mm base which can be anchored onto the ground as per irc 79 2019. mild steel guide poles shall conform to type 11 reflective sheeting specifications as per irc 67 2022 and astm d 4956 which would ensure to obtain clear visibility of the road alignment during night time. to achieve enhanced visibility of the curved portion of the road guide poles shall have substantial area allocated to exihibit alternate band of black paint and white retroreflective sheeting. the above arrangement shall be in place in both sides of the poles in the case of undivided carriageways having sharp curves. as per fig 1 of irc 79 2019 , retroreflective tape 2 inch red 45 mtrs per roll , retroreflective tape 2inch yellow 45 mtrs per roll , retroreflective tape 2inch green 45 mtrs per roll , retroreflective tape 2 inch white 45 mtrs per roll , convex mirror size 40 inch or higher mirror thickness 05 mm or higher with mild steel pipe fittings length 98 inch dia 5 inch post suitable for convex morror mounting. , speed limit 40 kmph caution sign board of size 600 mm as per irc 67 2022 , speed limit 30 kmph caution sign board of size 600 mm as per irc 67 2022 , u turn prohibited caution sign board of size 600 mm as per irc 67 2022 , give way caution sign board of size 600 mm as per irc 67 2022 , stop caution sign board of size 600 mm as per irc 67 2022 , falling rocks caution sign board of size 600 mm as per irc 67 2022 , overtaking prohibited cau

CTN :40145863

02 May, 2025 12.6 Thousand

Thrissur - Kerala

Tender For thrissur corporation puthanpalli- side road vehicle restriction sign board placing

corporations/Associations/Others

CTN :40109842

01 May, 2025 10.50 Lacs

Ahmedabad - Gujarat

Tender For providing & fixing and necessary maintenance of sign board of diff.chali and society and diff. road in saijpur ward of north zone. (arc)

Central Government / Public Sector

CTN :40100831

16 May, 2025 2.55 Crore

Alipurduar - West Bengal

Tender For construction of concrete paver block road from cni church to sign board chowpathi via h/o riday narjinary at khoardanga-i gp under kumargram block in the district of alipurduar.

CTN :40097321

01 May, 2025 25.91 Lacs

Multi City - Multi State

Tender For aesthetic improvement of work in gpra colony under 1h sub-division. (sh:- replacement of old damaged m.s. signage boards with s.s. signage boards).subwork/packages:m.s. signage boards with s.s. signage boards

CTN :40085824

29 Apr, 2025 9.01 Crore

Biharsharif - Bihar

Tender For rrsmp/25-26 biharsharif/02 - deepnagar to rail way station rest part,length of road - 500 mclearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification., construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing, km stone- reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703., 200 m stone- reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703., 600 mm equilateral & triangle - providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification clause 801, 600 mm circular - providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification clause 801, providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35.the finished surface to be level, uniform and free from streaks and holes. (pcc), providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on

CTN :40085848

02 May, 2025 1.74 Crore

Rourkela - Odisha

Tender For pdlp-rkl-15 of 2024-25 - part-i, clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of grith upto 300mm removal of stumps of such trees cut earlier and disposal of unserviceable materials by manual means andstacking of serviceab, road a - goldaru to ganjutola or-30-209, road b - koelsata to bhuyanbasti or-30-414, road c - nuagaon to sahupada or-30-210, scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified materials with in all lifts and lead upto 1000 metres etc.complete., road b - koelsata to bhuyanbasti or-30-414, providing 37.5mm thick built up spray grouting after scrapping, cleaning the road surface applying tack coat using 3.00kg of bitumen for 10sqm and laying of one layer of 37.5mm thick by using 0.45cum of 25mm to 40mm grade bitumin for 10 sqm in each layer with 0.12 cum of 12mm size b.h.g. c.b chips as key stone for 10 sqm.spreading over and laying induding heating pouring, spreading bitumirl metal and chips and compacting with p.r.r including cost ,conveyance royalty taxes of all required metterials,hire and running chsrges of mechinaries t&p etc complete as per direction of the engineer-in-charge, road a - goldaru to ganjutola or-30-209, road c - nuagaon to sahupada or-30-210, painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new plastered /concrete surfaces as per drawing and technical specification under section 1700 of mord., road a - goldaru to ganjutola or-30-209, road b - koelsata to bhuyanbasti or-30-414, road c - nuagaon to sahupada or-30-210, providing rainforced cement concrete of (1:2.5:5) with 20mm to 40mm size stone aggregate in foundations upto a depth of 1.5m below ground level and upto a height of 1.5m above ground level / bed level including cost and conveyance of all materials to site, and all labour charges complete as per direction of e.i.c., road a - goldaru to ganjutola or-30-209, road b - koelsata to bhuyanbasti or-30-414, road c - nuagaon to sahupada or-30-210, providing and fixing of retro reflective cautionary, mandatory and informatory sign board as per irc:67 made of high intensity grade sheeting as per clause no 801.30 fixed over aluminium sheeting 1.5mm thick supported on a mild steel angle iron post 75x, 800x600 mm information board, road a - goldaru to ganjutola or-30-209, road b - koelsata to bhuyanbasti or-30-414, road c - nuagaon to sahupada or-30-210, 600 mm circular cautionary sign, road a - goldaru to ganjutola or-30-209, road b - koelsata to bhuyanbasti or-30-414, road c - nuagaon to sahupada or-30-210, 900 mm triangular cautionary sign, road a - goldaru to ganjutola or-30-209, road b - koelsata to bhuyanbasti or-30-414, road c - nuagaon to sahupada or-30-210, 600x450 mm place identification board, road a - goldaru to ganjutola or-30-209, road b - koelsata to bhuyanbasti or-30-414, road c - nuagaon to sahupada or-30-210, providing & laying good laterite moorum for filling road flanks including cost and conveyance of all materials to site, and all labour charges complete as per direction of e.i.c., road a - goldaru to ganjutola or-30-209, road b - koelsata to bhuyanbasti or-30-414, road c - nuagaon to sahupada or-30-210, providing,& laying following size metal as per most specification for irc. gr-ii/ gr-iii metalling to a uniform thicknes of 100mm and packing the voids with small stones and hnd packing the same to proper camber including conveying and spreading moorum etc complete, road a - goldaru to ganjutola or-30-209, road b - koelsata to bhuyanbasti or-30-414, road c - nuagaon to sahupada or-30-210, earth work in excavation of foundation in hard soil with all leads and lift including rough dressing breaking clods and leveling bed and depositing the excavated materials away from the working area etc. complete as directed e.i.c., road a - goldaru to ganjutola or-30-209, road b - koelsata to bhuyanbasti o

CTN :40085849

02 May, 2025 87.49 Lacs

Rourkela - Odisha

Tender For pdlp-rkl-14 of 2024-25 - clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of grith upto 300mm removal of stumps of such trees cut earlier and disposal of unserviceable materials by manual means and stacking etc. complete as per specification and direction of engineer-in-charge, road (a). mdr 26 to samarjhola (package no or-30-371 ), road (b). mdr 26 to dahitola (pmgsy package no or-30-373), road (c).mdr 26 to panerpathar (pmgsy package no or-30-221), providing 37.5mm thick built up spray grouting after scrapping, cleaning the road surface applying tack coat using 3.00kg of bitumen for 10sqm and laying of one layer of 37.5mm thick by using 0.45cum of 25mm to 40mm grade bitumin for 10 sqm in each layer with 0.12 cum of 12mm size b.h.g. c.b chips as key stone for 10 sqm.spreading over and laying induding heating pouring, spreading bitumirl metal and chips and compacting with p.r.r including cost ,conveyance royalty taxes of all required metterials,hire and running chsrges of mechinaries t&p etc complete as per direction of the engineer-in-charge, road (a). mdr 26 to samarjhola (package no or-30-371 ), road (b). mdr 26 to dahitola (pmgsy package no or-30-373), road (c).mdr 26 to panerpathar (pmgsy package no or-30-221), painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new plastered /concrete surfaces as per drawing and technical specification under section 1700 of mord.including cost ,conveyance royalty taxes of all required metterials,hire and running chsrges of mechinaries t&p etc complete as per direction of the engineer-in-charge, road (a). mdr 26 to samarjhola (package no or-30-371 ), road (b). mdr 26 to dahitola (pmgsy package no or-30-373), road (c).mdr 26 to panerpathar (pmgsy package no or-30-221), providing rainforced cement concrete of (1:2.5:5) with 20mm to 40mm size stone aggregate in foundations upto a depth of 1.5m below ground level and upto a height of 1.5m above ground level / bed level including cost and conveyance of all materials to site, and all labour charges complete as per direction of e.i.c., 200 m stone, road (a). mdr 26 to samarjhola (package no or-30-371 ), road (b). mdr 26 to dahitola (pmgsy package no or-30-373), road (c).mdr 26 to panerpathar (pmgsy package no or-30-221), providing and fixing of retro reflective cautionary, mandatory and informatory sign board as per irc:67 made of high intensity grade sheeting as per clause no 801.30 fixed over aluminium sheeting 1.5mm thick supported on a mild steel angle iron post etc. complete as per specification and direction of engineer-in-charge, 800x600 mm (information board), road (a). mdr 26 to samarjhola (package no or-30-371 ), road (b). mdr 26 to dahitola (pmgsy package no or-30-373), road (c).mdr 26 to panerpathar (pmgsy package no or-30-221), 600 mm circular (cautionary sign), road (a). mdr 26 to samarjhola (package no or-30-371 ), road (b). mdr 26 to dahitola (pmgsy package no or-30-373), road (c).mdr 26 to panerpathar (pmgsy package no or-30-221), 900 mm triangular (cautionary sign), road (a). mdr 26 to samarjhola (package no or-30-371 ), road (b). mdr 26 to dahitola (pmgsy package no or-30-373), road (c).mdr 26 to panerpathar (pmgsy package no or-30-221), 600x450 mm (place identification board), road (a). mdr 26 to samarjhola (package no or-30-371 ), road (b). mdr 26 to dahitola (pmgsy package no or-30-373), road (c).mdr 26 to panerpathar (pmgsy package no or-30-221), providing & laying good laterite moorum for filling road flanks including cost and conveyance of all materials to site, and all labour charges complete as per direction of e.i.c., road (a). mdr 26 to samarjhola (package no or-30-371 ), road (b). mdr 26 to dahitola (pmgsy package no or-30-373), road (c).mdr 26 to panerpathar (pmgsy package no or-30-221), earth work in excavation of foundation in hard soil with all leads and lift including rough dress

Ms Sign Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

State Government

corporations/Associations/Others

Central Government / Public Sector