Latest ms socket Tenders | Government ms socket Tenders

Trust

CTN :41795000

25 Sep, 2025 NA

Shirdi - Maharashtra

Tender For purchase of electrical equipment- pvc insulation ,tape ,starter coil ,starter coil (dol) ,starter coil ,starter contactor coil ,starter contactor complete strip set ,starter contactor complete strip set ,starter contactor complete strip set ,flat cable 3 core ,star delta starter 13- ,21 amp ,starter contactor full ,starter contactor ,starter contactor ,mycon (gic) electronic timer batch no. 0548a ,50 hp fully automatic star & delta ,starter 45-75 a cs96009cojo ,kitkat fuse

CTN :41814284

22 Sep, 2025 NA

Multi City - Multi State

Tender For supply of electronic voltage regulator , self starter , leather cloth black , cellular sheet , adhesive special repair 998 , plywood , cable elect , gas oxygen industrial , maforn gas

CTN :41819602

17 Sep, 2025 NA

Multi City - Multi State

Tender For supply of g i heavy duty pipe size 4" dia x 10 ft length both side thread with heavy duty ms socket 02nos.make- bansal/jindal/tata or similar. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :41757199

15 Sep, 2025 NA

Surat - Gujarat

Tender For quotation for setc of different types of electrical item- supplying & erecting approved make horizontal, cement concrete foundation & with plastering, erecting roof type 16 g.m.s. sheet cover, erecting flexible pvc insulated multi strand multi core 1.1kv grade isi marked copper wires, erecting isi mark medium class rigid pvc pipes,erecting direct-on-line, starter with 15a.rating contractor and with 4-14a. range, directly operated thermal overload relay, erecting industrial bell gong type suitable for 230 volts, 50 c/s. ac supply complete erected, erecting electronic type cordless call bell erected

CTN :41759027

19 Sep, 2025 NA

Poonch - Jammu And Kashmir

Tender For supply of mt spares d d - cab tilt ram assy , wabco clutch booster alternate , dual brake valve , self starter 24v , shaft propeller , brake drum , crank shaft , assy turbocharger , pressure plate assy , 4 x 4 electronic shifter motor , bracket mounting rear

CTN :41729254

17 Sep, 2025 NA

Agra - Uttar Pradesh

Tender For supply of nozzle assy , cable assy speedometer , water pump assy , fuel pump motor , cable assy clutch , spring assy front , brush carrier assy , starter kit drive pinion , starter motor assy , holder assy rectifier , electronic point less regulator for alternator , fear lever kit , packing mc top , rubber mould wind shield galss , knuckle bearing

CTN :41476393

15 Sep, 2025 NA

Panchkula - Haryana

Tender For corrigendum : supply of mainline valve 1/2" , mainifold 1x4 , mainifold valve , pressure guage 4kg with valve , s/w elbow 3/8" , ms socket 3/8" , nut coupling 1/2" , brass adaptor 1/2" , cylinder pigtail 2' , click on type adapter 1/2: (nt) , non retrun valve , burner pugtail 6' , needle control valve , cylinder cabinet 4 cylinder , ms class pipe 15mm, 05" dully welded with paint , semless bend 15mm , s/w tee 15mm , clamp 1/2" , regulator 15 psi vinaaz , flexible pipe , adjustable regulator , burner pugtail 4' , cylinder cabinet 6 cylinder , installation charge per mess

State Government

CTN :41713719

11 Sep, 2025 8.17 Lacs

Belonia - Tripura

Tender For providing and fitting fixing of electrical accessories, spare of panel board of different water supply schemes at different locations under dws sub-division, belonia during the year 2025-26. - providing and fitting fixing of spare contact kits without coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., providing and fitting fixing of standard operating coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., supplying and fitting fixing of 4 pole ac control contactor (nhd series) suitable for bch made starter (standard coil voltages are 24, 110, 220/240 & 380/415 v, ac hz)., supplying and fitting fixing of 3 pole power contractor (type-mnx) suitable for 10 hp to 25 hp motor.mnx-25 (for l&t made starter), supplying and fitting fixing of pneumatic timer pn type delay relay-electro pneumatic) suitable for delay of time upto 30 sec. (bch made)., supplying and fitting fixing electronic timer type st-100 (l & t make) suitable for 240/300/415v, 50 hz having ranges for 3-30 secs/12-120 secs., supplying and fitting fixing of single phase preventer on delay 2 sec off delay 7 sec 65 vac asymmetry., providing & supplying of kit-kat rewireable porcelain fuse (cut-out) carrier & base of havells made (delux quality)., a) 63 amps/415 volt, b) 100 amps/415 volt, supplying and fitting fixing of 3 pole power contractor (type-ml) suitable for 10 hp to 25 hp motor.type ml-2 (for l&t make starter), supplying and fitting fixing of thermal timer type gt-200 (l & t make) suitable for 230/250v, 360v, 400/440v, 50 hz for 5-18 secs., supplying and fitting fixing of thermal overload relays mn2 type (directly operated& direct mounting on mnx 9-40 contactor) of l & t made. (suitable for ml/mnx type)., a) for relay range 9-15 a., b) for relay range 14-23 a., c) for relay range 20-33 a., supplying and fitting fixing of thermal overload relays (directly operated& direct mounting on ml-2/3 contactor) having relay range 9-14a/13-21a of l & t made. (suitable for ml-2/ml-3 type)., supplying and fitting fixing of citation-m overload relays (direct mounting with built in single phase protection) having relay range of bch made., a) for relay range 8.9-13.5 a., b) for relay range 13.2-30.00 a/17.4-24.00 a., c) for relay range 22.00-30.00 a., providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) gamair wood/ plywood pannel board for fitting fixing of electrical items, in/c 2 nos ms angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the engineer-in-charge., providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the engineer-in-charge., providing and fitting fixing heavy duty box type (resin filled) power factor correction capacitor l & t make etc. complete as per specification and direction of the engineer-in-charge.i) 5-15 kvar 440 v, supplying isi marked/ taparia make tools for water supply scheme., i) sly wrench, ii) screw driver, iii. pipe wrench, iv. plier, v. hexo frame with blade, providing and fitting fixing of moving iron type, range 0-500 v, 96 mm x 96 mm size ac volt meter ( l & t / ae make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the engineer-in-charge., providing and fitting fixing of moving iron type, range 0-100/0-200 amp, 96 mm x 96 mm size ac amps meter direct reading type ( l & t / ae make) with selector switch and ct coil as a electrical instrument of the pannel board as per specification and direction of the engineerin-charge., providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses), tripl

CTN :41725065

11 Sep, 2025 NA

Bazpur - Uttarakhand

Tender For supply of centrifugal machine spare parts in sugar mill - air filter element for centrifugal machine (small). isi/iso standard, air filter element for centrifugal machine (medium). isi/iso standard, air filter element for centrifugal machine (big). isi/iso standard, s.s. nozzle for centrifugal machine as per sample. isi/iso standard, teflon elbow as per sample. isi/iso standard, teflon nipple as per sample. isi/iso standard, teflon tee as per sample. isi/iso standard, brass elbow for centrifugal machine, size: . isi/iso standard, break liner, size: x 6 isi/iso standard, solenoid valve schrader below max. 10 bar air part no. g-53214 isi/iso standard, spare kit for above solenoid valve. isi/iso standard, air filter complete set connection. isi/iso standard, brake spring as per sample. isi/iso standard, s.s. clit for nk-1100 c/f machine. hole dia 10 mm. isi/iso standard, discharge cone strip for 1 ton c/f machine . isi/iso standard, gate valve rubber sheet as per sample. isi/iso standard, rotary distributor for c/f machine. isi/iso standard, epdm rubber seat switable for 300mm. butter fly valve isi/iso standard, teflon pipe 10mm. for centrifugal machine as per sample. isi/iso standard, teflon sheet, thick-2mm., width-1 mtr., length-1 mtr. isi/iso standard, teflon rod size:2 isi/iso standard, teflon rod size: 1, . isi/iso standard, solenoid valve single way , make-seetz rotex, type-crg-300 , pr. 7 kg/cm . isi/iso standard, solenoid valve double way , make-seetz rotex, type-cr-300 , pr. 7 kg/cm isi/iso standard , air filter for ng-700 centrifugal machine pressure- 10kgs/cm . isi/iso standard, s.s. nozzle with connector for ng-700 centrifugal machine, as per sample. isi/iso standard, s.s. nozzle size: 3/8 with connector for centrifugal machine, as per sample. isi/iso standard, s.s. socket size: 3/8 , as per sample. isi/iso standard, s.s. nozzle with connector for ng-700 batch type c/f machine. isi/iso standard, brass nozzle with connector for ng-700 batch type c/f machine. isi/iso standard, m.s. socket , as per sample. isi/iso standard, s.s. nozzle with elbow for one tone batch type c/f machine., as per sample. isi/iso standard, m.s. elbow , as per sample. isi/iso standard, quick adjustable valve, size: for ng-700 c/f machine. isi/iso standard, rubber o ring, size: 386 x 380 x 3 mm. for nk-1100 c/f machine. isi/iso standard, bearing housing shaft (forged steel) for nk-1100 nhec make centrifugal machine. isi/iso standard, bearing housing for nk-1100 nhec make centrifugal machine. isi/iso standard, grease cup of bearing housing for nk-1100 centrifugal machine. isi/iso standard, s.s. clit/clamp for nk-1100 centrifugal machine basket, hole size: 8 mm., as per drawing/sample. isi/iso standard, s.s. clit/clamp for dc-10 centrifugal machine basket, hole size: 10 mm., as per drawing/sample. isi/iso standard, brass bearing distance piece for bearing housing nk-1300 centrifugal machine. size: od:160 mm., bore: 98 mm., thick: 10 mm. as per drawing/sample. isi/iso standard, epdm rubber seat switable for 300mm. flap valve isi/iso standard, pneamatic actutor cylinder for 300mm. butter fly valve isi/iso standard, s.s. plough (scraper) for n.g. 700 centrifugal machine si/iso standard, bearing sleeve (m.s.) for bearing housing n.g.centrifugal machine as existing size, supply include satishfactory trial of ms basket with ss spider (arms), shaft & bearing sleeve for n.g.centrifugal machine.

CTN :41722543

11 Sep, 2025 NA

Rampur-Up - Uttar Pradesh

Tender For supply of spares for mill transmission and mill lubrication system for season 2025-26 - for mill transmission lubrication system, brass cock valve size-10mm both side externalthread, m.s. socket for cock valve (5/8)", m.s. nipple size (5/8x3" length), for mill lubrication system, brass ferrule long type (5/16)" bore size-1.5mm, ferrule connector (5/16)", copper pipe coil each coil for 15mtr (5/16)", brass nut (5/16)", for azad make oil & grease lubricator pump model no.- ae220, plunger spring, pumping unit assembly

Ms Socket Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Trust

corporations/Associations/Others

State Government