Latest ms trusses Tenders | Government ms trusses Tenders

State Government

CTN :39561897

11 Mar, 2025 63.73 Lacs

Thiruvananthapuram - Kerala

Tender For general-pre fabricated structure for govt arts and science college kulathoor-construction of class rooms store room and toilets civil work

Central Government / Public Sector

CTN :39568954

25 Mar, 2025 NA

Secunderabad - Telangana

Tender For l-shaped counter table supply to over telangana,maharastra, karnataka states with the following specific ations. main worktop: made of 25mm thick pre-laminated board(plb) of e1-p@ grade and approved shade confirming to is-12823:1990, edge banded with matching 2mm thick pvc lipping. access flap provided on work surface for wire mana gement. return worktop: made of 25mm thick pre-laminated board(plb) of e1-p2 grade and approved shade confirmin g to is-12823-1990, edge banded with matching 2mm thick pvc lipping. modesty pane:made of 18mm thick pre-lamina ted board(plb) of e1-p2 grade and approved shade confirming to is-12823-1990, edge banded with matching 2mm thic k pvc lipping. legs: cube legs are fabricated from ms erw tube of 50mm x 25mm x 1.2 mm thick and 40mm x 40mm x 1.2mm thick ( as peri s:7138). at the top surface of legs, support brackets of 3mm thick hr ( as per is:2062) are weld ed for fixing work shop. these are welded together by argo shiled welding. this welded structure is coated with 50micro n epoxy polyster coating. at the base, a plastic cap with m8 molded insert is fixed, on to which a straight m8 leveler fitte d which allows for adjustment of the height upto 50mm. cross members; cross members in unitized t-2 desk series are made from 50mm x 25mm x 1.2mm thick erw tube ( as per is:7138) these are coated with 50microns epoxy polyster c oating. cross members are assembled by friction fit pdc joinery abd grubscrews. there are always two cross members f or one table. access flap:soft closing access flap is used in unitized t-2 desk series. provision for standard size of 8 mo dule electrical (anchor roma) is offered.access flap is made from alumunium extension, pdc parts made from aluminiu m alloy and plastic parts are made from nylon 6 and wire brush with nylon bristles. power box: power box made with 0. 8mm thick crca (is:513), with switch plate (8 module cutout provision for anchor roma). this is fixed with workshop al ong the depth of access flap position. integrated hinge door storage with drawer: made of 18mm thick pre-laminated t win board of e-1 to p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2mm thick pvc lipping. door is fixed with slide on hinges and handles is providedfor ease of mpening drawer is provided with ebco meta box slide and lock for security. certification: green guard, green pro, indoor air quality, griha certified. make pre ferable: godrej/wipro/damaro ]

State Government

CTN :39530478

10 Mar, 2025 12.07 Lacs

Jammu - Jammu And Kashmir

Tender For establishment of pre-fabricated structure for medical general stores at top floor of the sci jammu electrical part.

Central Government/Public Sector

CTN :39388039

05 Mar, 2025 5.00 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : repairing of pontoon, floating drum structure including their shed and railings and fixing of mesh/grizzly on existing and newly fabricated ladders/ stairs and its strengthening for monsoon at krishnashila project.

Central Government And Public Sector

CTN :39518383

24 Mar, 2025 14.27 Crore

Chengalpattu - Tamil Nadu

Tender For supply of electrical equipments and installation works of electrical and instrumentation system for oesc at maps site - supply of following pre-fabricated and galvanized cable tray supporting structure materials as per specification, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/ 2002, 2003 & 2004/dd., 22 first rod with m22x55 long threading on one end & m 22 hex nut, isa 65x65x6, 22 rod, isa 65x65x8, ismc 75 channels, couplers (36 odx6 thk.), weld attachment (made of 75x10 thk. plate,320 long), swivel washer seat (46 x16 thk.), swivel washer (40 x16 thk.), iso 1234, 3.5x32 spilit pin, shear bolt m10x70 with hex. head & nut & washer, washer for shear bolt, nut for shear bolt, iso 1234, 3.5x20 split pin, washer (48 , is 2016), 3 mm thick l clamp with m8x30 mm long bolt, 2 plain washer, 1 spring washer and nut, 600mm long, 30 mm wide & 2.5 mm hot dip galvanized strip with two nos of m8x30 mm long bolt, 4 plain washer, 2 spring washer and 2 nuts, installation of cable tray supporting structure including site works such as cutting, drilling, threading, welding, fixing the hardware, touch up painting using zinc rich paint for welded surfaces etc., as per the specification, cable installation note, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/2002, 2003 & 2004/dd, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 150 mm width, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 300 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 150 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 300 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 150 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 300 mm width, common cable tray and ventilation duct support for supporting 1 tier of straight tray or elbow of 150 mm width, cabling systemsupply of following sizes of 6.6kv/11kv rated, al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed, gi wire/ strip armoured power cables along with steel cable drums, 3cx185 sqmm armoured cable, supply of following sizes of 1100v rated, cu/ al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed power cables along with steel/ wooden cable drums, 3.5cx400 sqmm, al conductor, armoured cable (gi armour) with steel cable drum, 3cx2.5 sqmm, cu conductor, un-armoured cable with wooden cable drum, supply of following sizes of 1100v/ 650v rated, cu conductor, pvc (type-a) insulated, overall screened, frls pvc (st1) inner and outer sheathed, gi armoured control cables along with steel/ wooden cable drums, 4cx2.5 sqmm, 1100v rated with wooden cable drum, 2cx2.5 sqmm, 1100v rated with wooden cable drum, 4cx10 sqmm, 1100v rated with steel cable drum, 2cx10 sqmm, 1100v rated with steel cable drum, 10px1.5 sqmm, 650v rated with steel cable drum, supply of following medium duty gi pipes/ heavy duty erw rigid conduits/hume pipe for routing cables from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following medium duty gi pipes/ conduits/hume pipes for routing cables (from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge), including supply and installation of clamps/ fasteners/ supports, accessories like bends/ couplers along with cutting, threading etc., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following sizes and types of cable trays and accessories as detailed in drawings and specification including supply & inst

CTN :39357208

08 Mar, 2025 NA

Mumbai - Maharashtra

Tender For providing of custom bid for services - construction of pre fabricated structure based school

CTN :39333422

25 Feb, 2025 20.09 Crore

Jaipur - Rajasthan

Tender For fabricated steel items (non-welded) a. s/s structure for mounting of 11/0.4 kv transformers on double pole &amp b. 1.4 mtr. m.s. channel cut point bracket with clamp

Central Government/Public Sector

CTN :39350288

25 Mar, 2025 NA

Kanakapura - Karnataka

Tender For set of carline assly for 3 phase memu tc coach, as per drawing: mpmemut3cla version 3, packing instruction: carline assly the supplier shall pack the three c/set (segme nts) of carlines in a suitably designed robust returnable metallic cage/structure in su ch a way that carlines shall not get entangle, damaged, twisted, dented during trans portation, storage, handling and lifting and to avoid scratches on outer surface suit able environment friendly cushioning material is to be placed between two segments, t ransit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear appr oximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature pr ofile of bottom carline should match with the profile of packing cage and it can acco mmodate fork lifter arms for lifting and transportation. it should have standard cla mping/fastening mechanism to facilitate easy unpacking & unloading. it should have fir m's identification/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open s ky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warra nty period: 30 months after the date of delivery ]

Ms Trusses Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector