Latest murrum Tenders | Government murrum Tenders

corporations/Associations/Others

CTN :42063030

06 Oct, 2025 1.00 Crore

Kashipur - Uttarakhand

Tender For supply of electric slaughterhouse (for animals) - primary & secondary chamber primary chamber* single chmber furnace of size 4270 mm x 1980 mm x 1820 mm.* plate thickness- 5 to 8 mm.* lining of interior of furnace- 400 mm wall cermaic blanketk, high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006* operation temperature- 800o c to 1000o c.* top smoke discharge for secondary chamber.* ash removal doors to be provided for ash collection after combustion.* ingtion- automatic.* temperature control- automatic* material loading- front gate- automaticsecondary chamber* operating temperature - 1050o c to 1250o c.* material of construction- mild steel with high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006.* made from is 2062 grade mild steel materials (or better) duty lined with insulation bricks, refractory bricks, hysil boards.* burner mounting arrangement with refractory burner block.furnace door:furnace door charging & discharging side fabricated from 5mm to 6 mm thickness door opening & closing automatic.ash door:* ash door (with casted cement lining) to remove nonhazardous ash from the chamber.* top inlet bottom smoke discharge for longer gas residence time.* furnace door charging & discharging side fabricated from 5mm to 6 mm thickness.* door opening & closing automatic/manual.refractory:{complete set of refractory shaped bricks for construction electric cremation of i.s. 8 bricks (approx. 1007nos bricks,insulation 4000 nos. refractory slid for construction of flue duct , as required, refractory heat resistant fire clay , ceramic blanket hysil board, asbestos ropes etc. as required for outer side of the furnace shall be constructed by red bricks by sand and cement as mortars and construction of chimney from basement of roof level including painting i.e. bricks portion shall be painted by two coats of red oxide as primer and to coats of synthetic enamel. (a) complete lining & assembling of entire cremation chamber according to standard size with proper arrangement of accommodation of heating elements, resting of dead body with sufficient opening for falling of ashes to the ash chamber & sufficient ventilation for fresh air spraying. (b) complete lining and assembling of entire cremation chamber according to standard size with provision of drawing out aces from the rear side and sufficient ventilation for fresh air injection. complete lining and assembling of entire cremation chamber according to the standard size with provision of air inlet supplying by fresh air blower and arrangement of multi ventilation path for fresh air}. osspl make, thermocouple heat sensor supply & fixing the thermocouple of heat sensing range 0 - 1200 c (cr.-al) sensor housed in s.s 304 casing of dimension 1200 mm long 22 mm od complete encased to and fitted terminal on other and for connection of compensating of 2 cores 0.5 aq. mm cr- al for heat sensing from thermocouple to temperature controller covered with asbestos embedded rope about 50 m length as per direction of eic., f.d. fan/centrifugal air blower with electric motor * supply and delivery at site, installation, testing and commissioing.* of fresh air injection system forced draft fan mild steel.* type: centrifugal.* capacity:- 500 cmh.* pressure:- 220 mmwg.* motor rating:- 2hp (kirloskar/crompton), burner assembly * total 2 nos. of lpg/cng/png fired automatic burner required.* the burner should be provided with comprising diffuser plate/ burner plate, photo cell housing electrodes with holding brackets, solenoid valve, electrodes caps, flexible hose pipes, spary nozzles, oil filter, blower, etc. connected with electric motor (each burner) & in built air regulator.* burners will work on auto on/off as per the set temperature for the combustion chambers.* the in-built bolwer will provide continuous air flow to the burners to prevent demages due to high temperature., supply and fixing of manifold with a p

CTN :42021067

09 Oct, 2025 NA

Umaria - Madhya Pradesh

Tender For item supply for forestry item - white paint (asian, berger, nerolac brand)_(premium quality), green paint (asian, berger, nerolac brand)_(premium quality), aluminum paint (asian, berger, nerolac brand)_(premium quality), black japan paint_(premium quality), measuring tape 2 metre_(freemans brand), measuring tape 5 metre_(freemans brand), measuring tape 10 metre_(freemans brand), measuring tape 30 metre_(freemans brand), paint brush small (2" inch)_(premium quality), paint brush big (4" inch)_(premium quality), paint brush big (6" inch)_(premium quality), oil chalk_(premium quality), writing brush (plate no.-1)_(premium quality), writing brush (plate no.-2)_(premium quality), tupentine oil_(premium quality), coal tar_(premium quality), joga rassa_(premium quality), nylon rope_(premium quality), zed pen nipul_(premium quality), cross cut saw_(premium quality), chapras_(premium quality), kanasi_(premium quality), marker pen_(premium quality), power chain saw machine_(petrol with 16 inch bar and chain ), cement ppc grade 53 (birla, acc, utratech)_(premium quality cement. the compresive strength must be 53 mpa after 28 days of curing. weight of bag is 50 kg. ), cement opc grade 43 (birla, acc, utratech)_(premium quality cement. the compresive strength must be 43 mpa after 28 days of curing. weight of bag is 50 kg.), sand (river) _(sand must be free from silt and other organic impurities. ), sand (balu) _(sand must be free from silt, stones and other organic impurities.), murrum (red)_(well graded, free from vegetation), coarse aggregate 10 mm _(cubical and angular shape without dust and organic matters), coarse aggregate 20 mm _(cubical and angular shape without dust and organic matters), coarse aggregate 40 mm _(cubical and angular shape without dust and organic matters), boulder stone (60-100 mm)_(round shape ), stone dust_(without soil and stone ), tmt bar 6 mm_(isi mark thermo mechanically treated bars), tmt bar 8 mm_(isi mark thermo mechanically treated bars), tmt bar 10 mm_(isi mark thermo mechanically treated bars), tmt bar 12 mm_(isi mark thermo mechanically treated bars), binding wire _(corrosion resistance, galvanized iron coating ), brick (fly ash) _(modular size 190x90x90 mm), brick (open bhatta)_(well brunt 9x4x3 inch size, uniform copper-red color and free from cracks, flaws), brick (chimney)_(well brunt 9x4x3 inch size, uniform copper-red color and free from cracks, flaws), kota stone_(25 mm thick), granite stone (kitchen)_(premium quality), vitrified tiles 2x2 feet_(glossy double charge), vitrified tiles 2x2 feet_(glossy double charge), vitrified tiles 2x4 feet_(glossy double charge), vitrified tiles 4x4 feet_(glossy double charge), bathroom tiles 12x12 inch _(premium quality ceremic tiles), wall tiles 18x12 inch_(premium quality ceremic tiles), border tiles 8x3 inch_(premium quality ceremic tiles), paver block_(dumble shape 200x160x80mm premium quality), paver block_(hexagon shape premium quality), wood primer_(premium quality), wood paint_(premium quality), wooden door frame 7.0" x 3.6"_(good quality timber), wooden door frame 7.0" x 2.9"_(good quality timber), window frame 5.0" x 4.6"_(good quality timber), window frame 4.0" x 4.6"_(good quality timber), window frame 3.0" x 4.6"_(good quality timber), ventilation frame 2.0" x 1.6"_(good quality timber), wpc door & window frame _(premium quality), iron door with making & fitting charge_(premium quality), aluminium door_(premium quality), panel door_(premium quality), doors & window panel prelaminated board with decorative lamination_(premium quality), plywood 18mm _(premium quality), plywood 9mm _(premium quality), mica 0.8 mm_(premium quality), colour mica sheet _(premium quality), fevicol_(premium quality), sand paper_(premium quality), mosquito mesh steel_(premium quality), window grill with making charge_(premium quality), aluminum window frame 3 track sliding (2 glass + 1 mosquito shutter)_(5 feet x 4 feet premium quality), aluminum window frame 3

CTN :41602577

04 Oct, 2025 NA

Barnala - Punjab

Tender For bid to ras bid to ras supply of impact testing machine charpy and izod , digital torsion testing machine , digital spring testing machine , rockwell cum brinell hardness tester , universal testing machine , wheel balancing machine , abs system trainer , electric vehicle kit , diesel fuel supply system , mpfi, four stroke four cylinder petrol engine test rig with eddy current dynamometer , model of mpfi system , model of crdi system , metallurgical microscope , metallurgical cut off machine , polishing machine , spark test apparatus , tool maker microscope , magnetic v block , angle deckor with set of angle gauges , profile projector , screw thread micrometer , sine bar , gear tooth vernier , sand mix muller , hand rammer , pneumatic rammer , shaper , milling , power hacksaw , circle cutting machine , edge folding machine , foot shear machine , digital multimeter , portable digital power factor meter , dc regulated power supply , portable digital wattmeter three phase , analog multimeter , digital lcr meter , digital clip on meter , current transformer , potential transformer , digital earth tester , portable digital power factor meter, single phase , portable digital frequency meter , digital flux meter , analog megger insulation tester , digital megger insulation tester , variac single phase , variac three phase , stroboscope , synchroscope , single phase resistive load , three phase resistive load , sliding rheostat wire wound , lte mobile trainer kit , am modulaor demodulator kit , psk modulator demodulator kit , qpsk modulator demodulator kit , am transmitter kit , arduino kits with modules , trainer board to study the effects of negative feedback on the amplifier characteristics , trainer board of two stage transformer coupled amplifier , trainer board of two stage direct coupled amplifier , trainer board to study characteristics of class a amplifier , optical fiber splicing machine , optical time domain reflectometer , pcb etching machine , pcb drilling machine , oil fired tilting type furnace impact testing machine (charpy & izod) with maximum capacity= 300 j for charpy 168 j for izod maximum scale graduation = 2 j, digital torsion testing machine with maximum torque capacity= 100 nm and lc 0.01 nm, digital spring testing machine with maximum capacity= 100 kn measuring range = 0- 100 kn load resolution= 5 n resolution of piston movement= 0.1 mm, rockwell cum brinell hardness tester with manual load selection and automatic zero setting dial gauge, universal testing machine with max capacity 100 kn load range: 0 100 kn load resolution: 2 n ram stroke: 150 mm, wheel balancing machine with weight of rotor= 0.5-10 kg max. weight on each pedestal= 7.5 kg max. diameter of rotor over bed= 600 mm, abs system trainer with four two wheels with wheel sensors and abs hydraulic actuator (modulator) unit which is controlled by the on-board computer system (ecu)., electric vehicle kit with ev controller, motor used in electric vehicle, battery used in electric vehicle, on board charger dc to dc converter,ac complete kit, transmission system etc, diesel fuel supply system with training board tank, the fuel transfer pumps, filters, injection pumps and the injection nozzles., mpfi, four stroke four cylinder petrol engine test rig with eddy current dynamometer, actual working metallic model showing various parts of mpfi system, actual working metallic model showing various //bid details 2 / 58

Central Government/Public Sector

CTN :42095012

20 Oct, 2025 NA

Jorhat - Assam

Tender For supply of consumables for construction of hybrid energy device - mild steel sheet, 8ft x 4ft x 1.2 mm, mild steel angle rod, 1.5 inch x 20 ft, mild steel angle rod, 1 inch x 20 ft, mild steel welding rod, diameter: 3.15 mm, mild steel perforated sheet, 8ft x 4ft x 1.2 mm., stainless steel 304 sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 perforated sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 pipe, 1.5 inch dia, 1.5 inch dia, 1.2 mm, 20 ft, zinc alloy door handle lock, stainless steel 304 welding rod, 2.5 mm diameter, ceramic fibre blanket insulation, 24"x12"x1", ceramic fibre rope, 10 mm diameter, 30 m length, heat insulating gasket, 8 ft x 4 ft, 5mm thickness, heat resistant spray paint 225 ml, silicon pipe 1/2 inch inner dia, 10 m, high temperature silicon hose pipe, 2 inch inner dia, 12 feet, worm-drive tubing clamps.chrome steel, hose clamp, 1/2 inch dia, worm-drive tubing clamps.chrome steel, hose clamp, 1 inch dia, worm-drive tubing clamps.chrome steel, hose clamp, 2 inch dia, worm-drive tubing clamps.chrome steel, hose clamp, 3 inch dia, galvanized mild steel set of nut, bolt and washer, 8 mm diameter, 2 inch length, temperature sensor with digital display, k type, 0-1250 с, adruino uno r3 development board, rod heater, 8.2 mm diameter, 12 inch length, quartz furnace observation glass, temperature: 1200 °c, 10 em diameter, 5 mm thickness, copper tube 1/2 inch dia, 23 swg, copper electric wire 6 sq. mm, 90 m, copper electric wire 2.5 sq. mm, 90 m, mcb dp 32 a, electric socket 16 a, electric plug 16 a, combined box 20 a, anabond gasket maker 85 g, heavy load caster swivel diameter: 100 mm, galvanized iron pipe b class diameter: 1.5 inch, length: 40 ft, galvanized iron pipe b class diameter: 1/2 inch, length: 20, galvanized iron pipe b class diameter: 3/4 inch, length: 20 a, stainless steel 304 ball valve diameter: 1.5 inch, stainless steel 304 ball valve diameter: 3/4 inch, stainless steel 304 hall valve diameter: 1/2 inch, check valve, brass diameter: 1.5 inch, check valve, brass diameter: 3/4 inch, check valve, brass diameter: 1/2 inch, metal cutter grinder disc, pack of 10, grit number 220, diameter: 4 inch, grit material: aluminium oxide, metal cutter grinding wheel, pack of 5, grit number 4., diameter: 4 inch, grit material: aluminium oxide, flap disc, pack of 10, grit number 80, diameter: 4 inch, grit material: aluminium oxide, flexible heavy duty 3 layer pvc water pipe, diameter: % inch, length: 30 m, teflon tape for plumbing, pack of 10, 12 mm thick and 10 m length, heat resistant gloves, material: leather, size: 30.48 cm, nitrile disposable hand gloves, pack of 50 pieces, size: l, 150 microfarad capacitor, 230 v, 150 microfarad, 230 v, anti vibration rubber ribbed pads, pack of 4, 150mm x 150mm x 12mm, square pillow block bearing ucf204, 20 mm diameter, inner ball mounted pillow block insert bearing kp08, 8 mim bore, step down transformer, 220v ac to 12-0-12 v.1.5a, single strand wire, diameter 0.51mm,5m, moc3021 moc 3021 optocoupler, bta16-600b triac, 600v 16a, switch. sw-spst, in4007 diode, 100%via, bldc motor with compatible e-bike controller, 48v 900w 3300rpm, lithium-ion battery, a grade 3.2v 2000mah (5c), battery management system, li-ion 135 48v 20a, nickel strip, 0.2 mm thickness, 10 mm width, 5 m length, silicon wire, 12awg, insulation paper, 65mm, glue gun, 40 w, spot welding rod 5000 w, cpu fan 12 v dc, thermoelectric generator (teg), 150°c, module., configuration: sp1848-27145, tungsten rhenium thermocouple, minimum temperature reading: 0°c, maximum temperature reading: between 2300°c and 2871°c, max31856 instrumentation amplifier,, resolution: 0.0078125°c, supply voltage: 3.3v to 5v, arduino uno r3 with adapter cable, miniature circuit breaker fuse, d type, 32 a, power rocker switch, voltage rating: 24 vdc, current, rating: 14 ma, 19mm size red power symbol led s.s. momentary type, push button switch 5v-24v dc, potentiometers 100 kohm, potentiometers 1 m ohm, relay module-(ssr-2 channel), 2 chann

Central Government/Public Sector

CTN :42075820

13 Oct, 2025 NA

Multi City - Multi State

Tender For supply of spare parts for hero super splendor - piston with pin lock set , cylinder block assembly , valve inlet and exhaust , valve seat inlet and exhaust , valve guide inlet and exhaust , valve cotter , carburettor assembly , clutch plate assembly , pressure plate assembly , complete engine overhauling gasket , clutch cable , speedometer cable , front brake cable , chain sprocket assembly , front shock absorber , rear shock absorber , front mud fendor , front brake shoe , rear brake shoe , side stand with spring , front wheel bearing , rear wheel bearing , air filter assembly , seat cover , fuel cock assembly with pipe , fuel pipe , side mirror both side , kick rubber , brake lever rubber , speedometer gear set , valve oil seal inlet and exhaust , drum rubber rear wheel , ignition key with lock set with tank , ignition coil with ht lead , spark plug cap , spark plug , cdi unit , head visor , fuel float , brake switch front rear , back light assembly with bulb , indicator front lh and rh , indicator rear lh and rh , starting motor abc , starting relay , insulation tape , zorspring wire harness , bulb 53 ) /bid number : gem/2025/b/6735203 * /dated: 27-09-2025 & & / bid document 1 / 39

CTN :42061738

17 Oct, 2025 NA

Bardhaman - West Bengal

Tender For supply of first aid box first aid kit lashing chain chaser die head e e - first aid box , first aid kit , lashing chain 1 by 2 inch , chaser die head 3 by 4 inch , g i wire netting mesh , rotary portable cutter machine , grinding wheel , sign board , sign board danger reflective , electrical insulation floor mat , signalling cable pvc 1 1 kv 3c 1 point 5 sqmm , electrode e6013 4 mm x 450 mm , sensitive earth leakage relay 80 150 ma with cbt , carbon brush 50 x 40 x 20 mm , hard wood block size 2 in x 8 in x 8 in

CTN :41778557

08 Oct, 2025 NA

Guna - Madhya Pradesh

Tender For corrigendum : supply of electrical measuring instruments d d - 6152701581 bosch grinder gws 750 100 sn 15 , 6208215001 rotary drill machine battery operated sn 3and11 , 6208891021 electric drill machine sn 16 , 7594100301 clampmeter fluke 337 sn 5 , 7594101531 clampmeter ac lekge 30 or300and3 or30 or300ma sn 6 , 7594109411 clampmeter 1000v sn 9and18 , 7594239271 insulation tester 1 kv sn 12 , 7594239331 insulation tester sn 19 , 7594488091 hv insulationtester 5kv sn 13and20 , 7594488101 contact resistance measurement kit sn 22 , 7594491111 motor checker digital sn 8 , 7594509981 rotating machine tester sn 7 , 7594510011 digital multimeter sn 14and17 , 7594690121 infrared thermometer,digital display sn 1 , 7594775011 oil bdv tester 100kv sn 21 , 7594828031 earth resistance tester digital display sn 24 , 7788409591 hydraulic crimping tool sn 4 , 8164414041 dry block temperature calibration bath sn 2 , 9130750011 phase sequence meter sn 23 , 9320806011 ferrule printing machine with accessorie sn 10 ) /bid number : gem/2025/b/6660745 * /dated: 10-09-2025 & & / bid document 1 / 20

CTN :42027047

06 Oct, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of filter for fuel plant , fevicol , hand gloves , socket fifty five mm , socker fifty mm , socket thirty fourmm , l handle , insulation tape , sell taping screw twoinch , wooden screw block oneinch , rust remover we forty big , bty terminal brass , safety gloves , cutting wheel fourinch , fuel filter cloth for plant , cutting wheel fourteen inch , nails , plywood for sealing repair , rubber mat for bty charging shop , welding rod , cotton waste , anabond tube , araldite , hussain cloth , cloth dasooti yellow , floor mat for dust proof , flux for gas welding , hose inlet for fuel plant , hose outlet for fuel plant , water separator for plant , fuel hose , connector six no , connector eight no , connector twelve no , connector fourteen no , fuel filter for plant

Central Government And Public Sector

CTN :42027246

16 Oct, 2025 NA

Kudankulam - Tamil Nadu

Tender For supply of switched-mode power supply, 1-phase, with push-in clip, control in primary circuit, input ac 100-240v, output dc 24v-5a as per annexure-1a , switched-mode power supply, 1-phase, with push-in clip, control in primary circuit, input ac 100-240v, output dc 24v-10a as per annexure-1a , switched-mode power supply, 3-phase, control in primary circuit, input 3ac 320-575v, output dc 24v-40a as per annexure-1a , insertable miniature relay dc 60v, 1co, load - 230v-6a as per annexure-1a , insertable miniature relay dc 110v, 2co, load - 250v-8a as per annexure-1a , modular unit for relay mounting, 1co, power supply ac-dc 230v, width 6.2mm, rcz-filter in control circuit side as per annexure-1a , modular unit for relay mounting, 2co, power supply ac-dc 230v, width 14mm, rcz-filter in control circuit side as per annexure-1a , universal terminal block, gray, 32a, 1000v, standart size 2.5, width 5.2mm, double- side screw connection as per annexure-1a , pe-terminal yellow-green, 32a, 1000v, standart size 2.5, width 5.2mm, double-side screw connection as per annexure-1a , universal terminal block, gray, 41a, 1000v, standart size 4, width 6.2mm, double-side screw connection as per annexure-1a , divider plate, length 42.5mm, width 2.5 mm, height 30.5 mm, colour gray as per annexure-1a , fuse terminal, black, 6.3a, 24v, standart size 4, width 6.2 mm, fuse 5x20, indicator 24v ac-dc as per annexure-1a , modular relay insulation, ac 230v, 50-60 hz 2co, load - 250v-8a, relay, base, led, clamp, plate as per annexure-1a , power socket, 3-pole l-n-pe, rated current - 16a, 230 v ac as per annexure-1a , spd, for 4-wire power supply systems as per annexure-1a , switched-mode power supply, 3- phase, control in primary circuit, input 3ac 320-575v, output dc 24v-5a as per annexure-1a , modular relay insulation, ac 230v, 50-60 hz 4co, load - 250v-5a, relay, base, led, clamp, plate as per annexure-1a , terminal with overvoltage protection, 10a, 24v, width 6.2 mm, black, double-side screw connection as per annexure-1a , switched-mode power supply, 1-phase, with pushin clip, control in primary circuit, input ac 100-240v, output dc 24v-3a as per annexure-1a

corporations/Associations/Others

CTN :42011420

03 Oct, 2025 3.38 Lacs

Multi City - Karnataka

Tender For filling of murrum on upstream splayed wing wall of drops at ch 19.00 km and repairs to damged portion of special repair at ch.19.00 to tail end of distry no.13 of ibc

Murrum Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others