Latest newspaper stand Tenders | Government newspaper stand Tenders

CTN :36081138

03 May, 2025 5.00 Lacs

Laheriasarai - Bihar

Tender For corrigendum : tender for supply of personal floatation device (life jacket made of polyurethane foam) , torch or emergency light (solar enabled) , safety gloves (canvas/leather) , 30 mtrs 10/11 mm bob nylon rope , lifebuoys , oars & rowlocks , paddles , anchors , galvanized metal bucket or bailer , outboard motor minimum 30 hp , dcp fire extinguisher , emergency spot light with minimum 12 hours run time , tool kit (colt cutier , pliers , screw driver set) , axe/hatchet 3 kg , fibreglass backboard stretcher , radio walkie sets 5 watt , blankets , park pickets , first aid kit , twin progned graphel/cat hooks , throw bag , gum boots , safety goggles , safety helmet (water rafting) , gps sets , navigation lights , maps , charts and compass , chain saw machine , camping tent (water resistant)+ mosquito net , inflatable rescue boat with 40 hp obm

State Government

CTN :40125270

05 May, 2025 70.0 Thousand

Meerut - Uttar Pradesh

Tender For supply of polycarbonate seal - 1- seals should be made of high quality of uv stabilized polycarbonate plastic materials (engineering plastic), which shall give complete visualization of its fixing mechanism and shall show clear indication if tampered and it should not be effected by boiling water etc- the seal must be able to withstand harsh environment direct sunlight exposure.the seal will be tamper evident with double locking system with additional third locking system facility, which works when the double anchor system is put in place with the female part of the seal. the seal should be transparent clear. the seal should be of one- piece polycarbonate body consisting of capsule and double locking anchor having stainless steel twisted wire (two stained) of 20 cm long molded itself in the temper proof seal male part. the wire should be non-corrosive and nonmagnetic made of 304 grades. sequential serial nos. of one alpha and six numeric numbers to be provided on the female part. the seal should have high rise molded logo be embossed of purchaser and companys name one each side of the seal. the provision for tamperproof sticker signature in the field of13.5mm x 21.5mm should be given, as and when the purchaser requires the need for the same for its proper utilization. the sealing arrangement should be such that its original position cannot be restored after any effort of tamper or breaking of the seals. the third lock as said should work as deterrent for opening the main male & female part of the seal.packaging: the seal should be supplied in packet of 100 seals. each packet shall be labeled for following information., 1.1- the seal should have following essential features.a. tamper resistanceb. heat resistance c. environmentally safed. should withstand direct sun light & rain water exposuree. tamper evident: material must show clear sign of tampering when material is compromised by penetration, drilling cutting, bending or pulling etc.f. one end of the wire should be loose and other end of wire should be permanently fixed on the upper part of female body passing thru the male part of sealg. ultra violet ray resistant h. must have third lock to secure male & female part from tampering.the sealing mechanism should be such that it can be sealed without using any pliers or tools. the sealing procedure must be fool proof and there should not any scope of pre tampering/malpractice with sealing wire while sealing.above mentioned essential features of seal must be verified by approved laboratory test report including melting point test, boiling water test, temperature with stand test etc.construction: one piece construction comprising of polycarbonate capsule & anchor and integrally connected pin part lock & non corrosive & nonmagnetic 2 strand twisted stainless steel sealing wire, all these features molded into one piece {called seal}capsule: contains and internal locking mechanism which accepts the anchor and permanently secure the sealing wire.anchor: the locking cap shall have double anchors, which secures the loose end of the sealing wire into the capsule locking mechanism.pin lock: lt is molded in the seal at time of manufacturing of the said seal and passes. through female part and locks the male part and secures the seal at the operational level

CTN :40134775

16 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For custom bid for services - 2 years so for isbl piping jobs-1) pre-fab : fillet j, pre-fab : butt joint (cs), pre-fab : rf pad cs weld joints, pre-fab: corrosion pad cs weld joints, pre-fab: corrosion pad (cs) with shoe, pre-fab: fillet joint (alloy steel) tig, pre-fab: fillet joint (ss) tig, pre-fab: fillet joint (dss/sdss) tig, pre-fab: fillet joint (inconel/monel) ti, pre-fab: butt joint (alloy steel), pre-fab: butt joint (ss), pre-fab: butt joint (dss/sdss), pre-fab: butt joint (inconel/monel), field: fillet joint (cs) tig, field: butt joint (cs), field: rf pad cs weld joints, field: corrosion pad cs weld joints, field: corrosion pad (cs) with shoe supp, field: butt joint (ss), field: butt joint (alloy steel), field: butt joint (dss/sdss), field: butt joint (inconel/monel), pre-fab : rf pad as weld joints, pre-fab : rf pad ss weld joints, pre-fab: corrosion pad ss weld joints, pre-fab: corrosion pad as weld joints, pre-fab: corrosion pad (ss) with shoe, pre-fab: corrosion pad (as) with shoe, field: corrosion pad ss weld joints, field: corrosion pad as weld joints, field: rf pad ss weld joints, field: rf pad as weld joints, field: corrosion pad (ss) with shoe supp, field: corrosion pad (as) with shoe supp, overlay patch - cs-upto 6mm thick, overlay patch - as/ss-upto 6mm thick, overlay patch - inconel/monel-upto 6mm t, inlay patch - cs - upto 6mm thick, inlay patch - as/ss - upto 6mm thick, inlay patch - inconel/monel - upto 6mm t, weld run - cs (tig), weld run - cs (arc), weld run - with ss/as electrodes, weld run - with ss/as filler, weld run - with dss/sdss filler, weld run - with dss/sdss electrodes, weld run - with monel/inconel filler, weld run - with inconel/monel electrodes, non-pressurized piping welding joint, bending of plate for patch welding jobs , hot bending of pipe/tube below 1.5" dia, cold bending of pipes/tube below 1.5" di, rolling of plate into pipe, replacement of structural beams/columns , replacement of structurals-angles flats , replacement of grating/chequer plate (by, replacment of gratings (with welding), pipe clamp fabrication, blind fabrication, plate flange fabrication, welding of pin holes/spot welding (excep, fabrication of sample cooler coil n repl, dp test(piping), dp test(other than piping), dp test - surface area/tube sheet, mobilization of closed proximity radiogr, radiography upto 1.5" dia. - rate applic, radiography - above 1.5" dia. and upto 3, radiography - above 3" dia. and upto 6" , radiography (above 6"), radiography(other than piping), stress relieving upto 1.5" dia. - applic, stress relieving above 1.5" and upto 3" , sr - (above 3"), sr (other than piping), mobilisation of wfmpt/ufdt equipment wit, wfmpt, ufdt, mobilization charges for digital radiogr, hardness test, replacement of hexmesh (shell connected , replacement of hex mesh (inside cyclones, manual cleaning of piping/eqpt, copper slag / grit blasting, painting of zinc silicate, painting of zinc phosphate, hiring of mobile crane, supply and operation of tractor trailer, supply and operation of jeep/pick-up tru, hiring of air compressor - weekly, running hour rate for air compressor, supply and operation of diesel de-wateri, blind removal/installation, threaded fittings, valve - dropping/ installation, insulation removal, hydro test of pipelines, system scaffolding - rate per block 2.5m, manway opening/box-up, cold cutting of pipelines, bolts cutting with hacksaw/grinding/gas , chipping - rcc/ refractory, chipping - pcc, pcc - 1:4:8 ratio, pcc - 1:1.5:3 ratio, rcc of 1:1.5:3 ratio, excavation and back filling, provision of concrete box to arrest leak, replacement of ss anchors, replacement of cs anchors, replacement of inconel anchors, unplugging as per operation, tech data entry services, addtnl hrs : tech data entry srvcs, cs welding crew at workshop/fabrication , cs welding crew at unit/site, cutting crew (gas cutter/grinder), rigging crew, ss/monel/inconel welding crew at unit/si, ss/as/monel/inconel welding crew at shop

State Government

CTN :40144505

01 May, 2025 NA

Srinagar - Jammu And Kashmir

Tender For as per nit serial no-1 stage works at high court srinagar - engagement of skilled and un-skilled labors ., mazdoor., carpenter 1st class., carpenter 2nd class, mason 1st class., mason 2nd class., plumber., black smith., earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:(all kinds of soil), providing and laying in position cement concrete of specified grade of mix 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including curing and carriages of material involved but excluding the cost of centring and shuttering., providing and laying in position cement concrete of specified grade of mix 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including curing and carriages of material involved but excluding the cost of centring and shuttering., providing and laying in position cement concrete of specified grade of mix1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including curing and carriages of material involved but excluding the cost of centring and shuttering., providing and laying in position specified grade of reinforced cement concrete of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including curing and carriages of material involved but excluding the cost of centering, shuttering, finishing and reinforcement., providing & laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) including all carriages and curing complete., providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including all carriages and curing complete., providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. all works upto plinth level 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), providing and laying cement concrete of mix 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone agg. 20 mm nominal size) crushed in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor v level, including curing and all carriages of material involved but excluding the cost of centring, shuttering and finishing complete., reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 , landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level thermo-mechanically treated bars of grade fe-500d or more including carriages complete., structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.hot finished seamless type tubes, steel work weld

corporations/Associations/Others

CTN :38520804

28 Apr, 2025 NA

Barsingsar - Rajasthan

Tender For bid to ras supply of stainless steel anchors of ss-310 grade 80mm length 30x6 mm size. , stainless steel anchors of ss-310 grade 100mm length 30x6 mm size. , ss" y" anchors 175 mm length (30x6 mm) with lap of 40mm , ss" y" anchors 275 mm length (30x6 mm) with lap of 40mm

CTN :40091106

13 May, 2025 NA

Kolkata - West Bengal

Tender For supply of 4 point 5 slace 5 slace 5 point 5mm anatomical lcp for distal femur 05 slace 16 , antirotation proximal femoral nail with screws assorted sizes , uncemented thr consisting of grit-blasted biocompatible titanium stem , primary uncemented thr system, proximally coated double slace triple taper , primary uncemented thr system, fully coated double slace triple taper , ao pattern dhs fixed angle barrel plate 130-150 degrees, 3-6 combi-holes , interference screw with sheath construct non metallic for secure fixation , cannulated tibial nail with 5 proximal locking and 4 distal locking options , 4 point 5mm narrow lcp with combi-hole technology, plate length 8-16 holes, , proximal humerus anatomical locking plate complete construct with 80 percentage , uncemented thr with ceramic head, long stem, dual mobility linner , ortho roll cast padding cotton size 10 cm x 3 mtr slace 15cm x 3 mtr , bone cement antibiotic loaded 40 gm , vicryl no 2 with os needle , prolene polypropylene size no 1 40mm cutting needle , polybutylate coated braided polyester size 2 slace 5, 1 slace 2 circle taper , vertical isolation drape for hip surgery of clear transparent water proof , sterile disposable u drape with tube holders coma 80inch x 124inch , knee arthroplasty drape set , adjustable loop cortical button device , calcium sulphate pelletable powder for antibiotic delivery 10cc , meniscal repair system with trigger based positive deployment of 2 slace 4 , disposable pulse lavage system , trabecular metal shell slace liner with augment, ceramic head, stem and 5 screws , augmented posterior stabilized modular knee replacement prosthesis , posterior stabilized fixed bearing modular knee replacement prosthesis , locking proximal tibial osteotomy plate titanium plate with 8 x compatible , 3 point 5mm locking proximal humerus periarticular plate 5-14 shaft , cemented bipolar hip prosthesis with double slace triple tapered polished , 3 point 5mm lcp, 5-18 holes, with compatible 60 percentage locking head , distal radius fixed slace preferably variable angle volar locking plate 2 point 4 , distal radius fixed slace preferably variable angle volar locking plate 2 point 4 , railroad fixator set- small, medium and larege with tapered ha coated , knotless biocomposite suture anchors with closed eyelet 1 point 8 slace 2 , 2point7slace3point5mm low profile reconstruction plates - straight 3-20 holes , ethibond excel no 5 green braided polyester,75cm long,48mm 1slace2 circle , ethibond suture no 2 , revision knee prosthesis with rotating hinge, femoral component and tibial , olecranon plate, anatomical 3point5mm right or left, all sizes 2 ,12 hole , anatomical clavicle shaft locking plate 2point7slace3point5mm all lengths , ao pattern 4 point0 mm partially threaded cannulated cancellous screws , external stabilizing system set for ctev complete small slace medium slace large , hook plate 2point7slace3point5mm, all lengths, with combi-hole technology , hip spacer mould different sizes with 2 packets of low viscosity antibiotic , topical dynapar plus 30 ml diclofenac diethylamine bp 2 , sterile packed 1point5slace1point8slace2point5slace2slace9slace3point5 , non-adhesive elastic reusable compression crepe bandage 10 cm x 4point , iodophor impregnated sterile adhesive incise drape 35x35cmslace60cm , sterile packed transparent cling drape , vac hydrophobic dressing with 400-600 micron size reticulated structure , water resistant synthetic orthopaedic cast padding 10 cm x 3 meter , disposable mould for knee articulating spacer different sizes small

CTN :40077747

12 May, 2025 19.58 Lacs

Lucknow - Uttar Pradesh

Tender For supply of reverse cutting interference screw biocomposite 8 x 28 and 30 mm , reverse cutting interference screw biocomposite 9 x 28 and 30 mm , reverse cutting interference screw biocomposite 10 x 28 and 30 mm , reverse cutting interference screw biocomposite 8 x 23 and 25 mm , reverse cutting interference screw biocomposite 9 x 23 and 25mm , sterile packed 3point 5mm titanium anchor with preloaded with 2 x no 2 , sterile packed 5 point 5 mm titanium corkscrew anchor with 2 x no 2 , knotless biocomposite suture anchors closed eyelet 2 point 4 and 2point 5 mm , tap in knotless biocomposite suture anchors closed eyelet 2 point 9 and 3 mm , tap in knotless biocomposite suture anchors closed eyelet 3 pt4 and 3pt 5mm , tap in twist in knotless biocomposite suture anchors with closed eyelet 4 pt5mm , tap in twist in knotless biocomposite suture anchors with closed eyelet 5pt5mm , sterile packed 6 point 5 mm titanium corkscrew anchor with 2 x no 2 , arthroscopy radiofrequency suction ablators hand piece 60 degree , arthroscopy radiofrequency suction ablators hand piece compatible , shoulder arthroscopy twist in canulla 8 point 5mm.implants , aggressive cutter shaver blades for arthroscopoic shaver system box of 6 , end cutter shaver blades for arthroscopoic shaver system implants box of 6 , meniscal repair system trigger based positive deployment of 2 peek implants , meniscal repair system trigger based positive deployment of 4 peek implants , functional knee suture side quick loading bottom jaw suture 6mm canula , functional shoulder suture passer quick loading bottom jaw suture 8mm canula , endobutton with adjustible length fiberwire orthochord loop for acl implants , turp irrigation set , knotless 5pt 5 mm anchor bio absorbabe btcp mateial peek tipclyindrical shape , orthopaedic fibre tape made of non absorbable uhmwpe 2mm wide and 90 cm suture , short proximal femoral nail antirotation125 and130 and135 degree 170 slash 200 bid details/ 2 / 28

Central Government And Public Sector

CTN :40080665

30 Apr, 2025 NA

Alipurduar - West Bengal

Tender For supply of rail anchors

Central Government And Public Sector

CTN :40081322

30 Apr, 2025 NA

Alipurduar - West Bengal

Tender For supply of rail anchors to drawing

CTN :38932670

24 Apr, 2025 NA

Bangalore - Karnataka

Tender For bid to ras supply of furnitures- wooden 5 seater sofa set 3 1 1 , office chair visitor chair with arm rest with steel frame and cushioned seat back chair without wheels holds upto 130kg heavy design brown , maxon ergonomic pre assembled with heavy duty metal stand ergonomic premium leather revolving office chir with 2 years warranty tilt pushback mechanism , magazine holder newspaper stand storage rack for home book shelf school office storage organizer steel 4 tray 4 rack black matt , wooden 40x20x16 storage centre table for living room solid waterproof wood large modren coffee table for home furniture stylish oval design for 3 4 seater sofa chestnut , slimline 3 door steel almirah tex sea pine 1 year warranty 1 locker 8 shelves 2 drawers , almirah neolite 2 door steel amirah cupboard for clothes textured demin blue 1 year warranty 4 shelves 1 locker , scholar study and office desk 1 year warranty multipurpose workstation for students professionals office , 360 rotating bookshelf bamboo storage display rack open design shelving for living room study office standing shelves size 72x18x18 inch , filing cabinet 4 drawer metal file cabinet for home office brown color for legal size

Newspaper Stand Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

Central Government And Public Sector

Central Government And Public Sector