Latest niobium rod Tenders | Government niobium rod Tenders

Central Government/Public Sector

CTN :45160136

19 May, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - disposal of ferrous scrap released material (mild steel) such as: (1) m.s cut pieces, qty=7374 kg. (2) bolster spring, qty=490 nos.=1950 kg. (3) sab, qty=22 nos.=710 kg. (4) brake cylinder 14", qty=20 nos.=1345 kg. (5) brake cylinder 12", qty=10 nos.=588 kg. (6) coupler rod, qty=310 nos.=2248 kg. (7) m.s. sheet off size, qty=4685 kg. (8) elastomeric pad, qty=510 nos.=ms.-2430 kg, burnt ruber-270 kg. having local lot no. cw/peh/25-26/27. location:-scrap yard c&w/peh.

corporations/Associations/Others

CTN :45166020

15 May, 2026 NA

Kalaburgi - Karnataka

Tender For auction sale of ms scrap w/w/o aluminum attachments,scrap seat frames and legs and luggage carriers,scrap armature tt/ll/eicher,scrap auto items grade-1,scrap auto items grade 2,scrap bearings,scrap auto electrical items,scrap spring steel blades all size,scrap rubber items consisting,scrap tread rubber powder and pieces,scrap stator,scrap clutch plates /clutch disc (ll/tt/eicher- round & fan type),scrap gear box bell housing,scrap rotor,scrap clutch covers assemblies/ pressure plate ll/tt/eicher),scrap brake drums,scrap paint drum 4/5 ltr capacity,scrap tubes full round with / without neck,scrap field coil,scrap flaps full round with cut,scrap empty grease barrel,scrap single/two/three seater cusion with rexine,scrap paints and thinner drums & bvc tin 20/25/30 ltr capacity,scrap fip noszzles ,elements , automiser body and spares,scrap waste/used/burnt engine oil with barrel 210 ltr. capacity,scrap sleeper bed cuashion w/w/o rexine,scrap water body assy / water pump (tata /ll//eicher),scrap viscous assy. with fan tt/ll,scrap brass synchro ring/ thrust washer/king pin bush,scrap turbo charger assy with exhaust manifold,scrap radiator core,tata/al/eicher,scrap inter cooler ,tata/al/eicher,scrap slack adjuster tata/al rh/lh (w/w/o gear),scrap vane pump tata / ll/ eicher/midi,scrap tie rod and push rod assy,scrap pressure plate back plate tt/ll,scrap power steering box assy. tt/ll,scrap rear cj shaft w/w/o cross bearing tt/ll,scrap axle shaft tata / leyland / eicher,scrap diesel tank 240/250/ 165/180 ltr capacity,scrap pvc/polythene scrap generated at trp,scrap crown pinion assy with carrier tata/leyland,scrap pure aluminum,scrap mechanical /hydralic jacks,scrap broken head light assy,scrap wheel disk without ring,scrap curing envelops & bag,scrap e.t.m small pipe,scrap returder corona vehicle,scrap wiper motor,scrap fly wheel,scrap shock absorber,scrap pvc coolant reserve tank,scrap fire extinguisher 1/2/4/6/9 kg

Co-operative

CTN :45096137

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For c.s. item on conversion and supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. no. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg. kcp-mh-70 and texmaco mh-32supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b as per drg. kcp-mh-13-ii and texmaco mh-13-isupply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate, as per drg., c.s.trash beam as per is-1030/is 2708 as per drg. kcp-mh-84-r and texmaco mh-36supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per drg no mh-17-b for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-31for top roller housingsupply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79 for bottom roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, as per drg. blr-73/1, c.s.sprocket/gear for bagasse elevator (pilot bore) pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm, boss- 270x130 mm, as per drg. mh-75, cs sprocket (pilot bore) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm, od 258.8mm, for bagasse elevator drive, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for inter carrier, as per drg. mh-72, teeth 12, od-302mm, pcd- 290mm, rd-242 mm, pitch-75mm, b1 100mm, b2 75mm, s.s. wear plate is 304 quality, as per drg. mh-60(i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg. mh-90 (texmaco), c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg. cu-26-ii, pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg. mh-200716, clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete as per drg. mh-39-r, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-210 mm, pcd-198 mm, pitch- 20 mm, module-6 as per drg. no. cu-16-r, pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, as per drg. blr 32/93, od- 646mm, pcd-573mm, rd-497mm, nos of teeth 12, pitch-150.00mm, chain sprocket for int

CTN :45163137

22 May, 2026 NA

Dimapur - Nagaland

Tender For supply of shelter parts complete for or living shelter 20 men , pcc cement is 1489 , coarse sand , 20mm aggregates , 40mm aggregates , hardcore 63mm stone aggegates , pcc solid block 400 into 200 into 200mm , 12mm dia tmt bars , 8mm dia tmt bars , non skid ceramic coloured tiles size of 600mm into 600mm into 8 to 10mm thick , chequred tiles 250 into 250 into 25mm , binding wire 0 point 9mm , nails 4 inch long , water proof plywood 8 feet into 4 feet into 18mm thick , weather coat paint for external paint for wall , primer paint for external paint for wall , roller brush 4 inch of best quality , colour aluminium composite panel 1 point 50 into 1 board , stainless steel 300mm word , drappery curtain rod 5 feet long 20mm dia , drappery curtain rod 4 feet long 20mm dia , ms bracket with end knobs for curtain rod best quality , white cement , water proofing compound , earthing set complete as per ts of appx i , lc set complete with safe chemicals as per ts of appx i , led battern surface 4 feet long 15 w output 1600 lumens , pixel bulk head fittings led lamp 15 watt , cealing fan 1200mm with regulator conf to isi marked , pedestal fan 400mm sweep isi marked with heavy motor , pvc insulated heavy duty 1100 volt grade cable 10 sqmm aluminium twin core , pvc sheathered unarmoured standard copper conductor cable 1 sqmm dia conf to is 694 90 mtr long , pvc sheathered unarmoured standard copper conductor cable 1 point 5 sqmm dia conf to is 694 90 mtr long , pvc sheathered unarmoured standard copper conductor cable 2 point 5 sqmm dia conf to is 694 90 mtr long , pvc sheathered unarmoured standard copper conductor cable 4 sqmm dia conf to is 694 90 mtr long , pvc junction linker 75 into 75 mm , modular switch piano flush type 6 amps 240 volts single pole one way isi marked , modular switch piano flush type 16 amps 240 volts single pole one ) /bid number : gem/2026/b/7527899 * /dated: 12-05-2026 & & / bid document 1 / 43 way isi marked , modular socket outlet 2 by 3 pin 6 amps 240 volts witch piano button type , modular socket outlet multi purpose2 in 1 6 to 16 amps isi marked , surface mounting plastic boxes suit for switches 12 module of size 8 inch into 6 inch , surface mounting plastic boxes suit for switches 6 module of size 9 inch into 3 inch , surface mounting plastic boxes suit for switches 4 module of size 5 inch into 3 inch , combined cover plate with frame inner and outer of 12 module , combined cover plate with frame inner and outer of 6 module , combined cover plate with frame inner and outer of 4 module , blanking plate for switch or socket , cealing rose with square box 65 into 50mm 2 to 3 terminals , pvc flexible nibbed pipe 20mm dia , pvc casing caping 38mm wide not less than 2mm thick , pvc coupler for 38mm casing capping pipe , pvc tee for 38mm dia pvc pipe , pvc elbow for 38mm dia pvc conduit pipe , pvc space bar saddies for 20mm dia pvc pipe , pvc corner bend for 38mm casing capping pie , house service bracket hook type complete with 3mm long gi pipe 40mm dia , mcb db 8 a sp 240 volt conf to iec and is 8828 , mcb db 10a sp 240 volt conf to iec and is 8828 capacity 10 ka , mcb db 20a sp 240 volt conf to iec and is 8828 capacity 10 ka , mcb db 32a sp 240 volt conf to iec and is 8828 capacity 10 ka , insulation tape 1 point 80 cm width and 7 point 5 mtr long , no 8 into 32 csk screw full threaded , screw drywall fine threaded 13 by 6 1000 pcs , double sleeping bunk with mattress as per tech specification given in appx c , bed side locker as per tech specification given in appx d , chair writing as per tech specification given in appx e , writing table as per tech specification given in appx e , water dispenser as per tech specification given in appx e , powder based fire extinguisher as per tech specification given in appx e

CTN :45163208

22 May, 2026 NA

Ferozepur - Punjab

Tender For supply of rod weldinng steel mild 3.15mm , plywood for general purpose 19mm , rivets counter sunkl flat head 90 degrees , ms sheet 4 8 , screw wood slotted csk head mild steel , anabond rtv silicon sealant 666

CTN :45107744

13 May, 2026 NA

Parganas - West Bengal

Tender For supply of spare parts for bd 80 veh - anabond red (175 gm) part no nk, araldite 175 gm part no nk, cloth emery - 120 part no nk, cloth emery - 180 part no nk, cloth emery - 60 part no nk, cloth white muslin part no h28305000243, cotton waste part no nk, electrod (e 900) 4 mm part no 3439000147, electrod ms 4 mm part no nk, electrodes welding ms gp 2.50 mm part no g23439000016, female pin part no nk, feviquick (20gm) part no nk, france chalk powder part no nk, halide sheet 0.5 mm part no nk, halide sheet 1 mm part no nk, hasp and staple shed latch lock (aps) part no nk, hinges part no nk, hollow pipe 12 mm part no nk, insulation tape part no nk, iron rod 8 mm part no nk, lt wire 2.5 sq mm part no nk, m seal part no h18010000084, male pin part no nk, muskin tape 2 "/3" inch part no nk, paint aluminium (silver) 1/2 ltr part no h18010000114, paint red oxide part no h18010000110, paint rfu og part no hi8010007499, paint syn enamel black part no h18010007482, paint syn enamel blue part no nk, paint syn enamel white part no h18010000014, plastic tag part no nk, ps green part no nk, putty part no nk, rust cleaner(zorrik 180 gm) part no nk, sodium hydroxide(caustic soda) part no h18040000019, solder soft 40-60(200grm=1pkt) part no nk, steel 40c8 r/bar dia 20 mm to is : 1570 part no nk, strap 2" part no nk, thermal sleeve 8 mm part no nk, thinner part no nk, thread tape part no nk, welding electrode cast iron 3.15mm e 115 part no nk, welding electrode ms dia 3.15 mm part no nk, dummy switch part no nk

CTN :45166505

15 May, 2026 NA

Garhwa - Jharkhand

Tender For supply of lot boards with specification= 10 mm dia rod - 1524 mm height and board size- 300 mm x 450 mm by m.s. plate [ warranty period: 30 months after the date of delivery ]

CTN :45105959

21 May, 2026 NA

Bazpur - Uttarakhand

Tender For supply of mill store materials in sugar unit - manila rope 1 with test certificate. isi/iso standard, manila rope with test certificate. - do -, manila rope - do -, manila rope 2 - do -, round gauge glass size x 14 isi/iso standard, round gauge glass size x 16. - do -, round gauge glass, size: 30 mm. dia. x 43 . - do -, round gauge glass, size: 30 mm. dia. x 44 . - do -, round gauge glass, size: 1 dia. x 43 . - do -, round gauge glass, size: 1 dia. x 44 . - do -, round gauge glass, size: dia. x 53 . - do -, plug sleeves for gauge glass . - do -, emery paper rough & fine (all sizes) - do -, emery tap rough & fine (all sizes) - do -, emery cloths rough & fine (all sizes) - do -, emery paste rough 400 gm. pack. - do -, emery paste fine 400 gm. pack - do -, emery stone 6 x 2 . - do -, m.s. u-clamp,size 3/8 for sugar elivator & seed elivator.as per sample. isi/iso standard, m.s. u clamp 5/8 . isi/iso standard, m.s. u clamp . isi/iso standard, m.s. u clamp with holder and nut,size: (as per sample). isi/iso standard, steel ball 3 mm. isi/iso standard, do 5 mm. - do -, do 6 mm. - do -, do 8 mm. - do -, do 12 mm. - do -, steel ball, size: 4 mm. isi/iso standard, do size: 6.5 mm. -do-, do size: 7 mm. -do-, do size: 10 mm. -do-, holetite compound yellow packing in 400 gms. isi/iso standard, graphite powder in 1/2 kg. pack. isi/iso standard, brasso in 500 m.l. packing isi/iso standard, red lead in 25 kg. packing. isi/iso standard, white lead in 10 kg. packing isi/iso standard, h.s.s.hacksaw power blade all size isi/iso standard, hose pipe (rubber) all sizes. isi/iso standard, synthetic rubber hose pipe (all sizes). isi/iso standard, flat wire brush 6 x 3 with wooden handle. isi/iso standard, break liner 3/8 x 4 isi/iso standard, break liner x 6 isi/iso standard, plumber block (all sizes) jmc/smr make isi/iso standard, e.n.8 shaft squire/round all size isi/iso standard, asbestos taper sleeve . leader make isi/iso standard, grease cup. no.6. isi/iso standard, do no.8. isi/iso standard, araldite 1.80 kg. pack. isi/iso standard, teflon tape . isi/iso standard, teflon rod 1 . isi/iso standard, do 1 . -do-, do 2 . -do-, dunlop adhesive 1 ltr. pack. isi/iso standard, restoline 500 m.l. pack. -do-, white metal for bearing. isi/iso standard, cotton waste isi/iso standard, tube expander all size power master make isi/iso standard, chain pully block induf make with test certificate 1" to 5", chain pully block morris make with test certificate 1" to 5", rubber insertion sheet all size 3 mm., 6 mm. thick, 10 mm., 12 mm. thickness. isi/iso stnd., diamond make simplex & duplex chain all size with test certificate, air blower, isi/iso standard, bearing retainer, 638. isi/iso standard, flat belt, size: 6 x 6 ply, isi/iso standard, flat belt, size: 6 x 8 ply, isi/iso standard, brake liner, size: x 6 . isi/iso standard, brake liner, size: x 4 . isi/iso standard, brake liner, size: x 8 . isi/iso standard, crushable no. 120. isi/iso standard, do 150. - do -, do 200. . - do -, boiler flat gauge glass with gaskit kilinger make isi/iso standard, do h 7 size: 280 x 34 x 22 isi/iso standard, do h 9 size: 340 x 34x 22. -do-, gasket for flat gauge glass size: 280 x 34 x 22 isi/iso standard, do size: 340 x 34 x 22 -do-, d.p. kit (set of 03 pieces). isi/iso standard, jointing past stag b (1 kg. each pack). isi/iso standard, ana bond 666 (100 gm. each pack).tube blue isi/iso standard, oil seal (all size) mykoda make isi/iso standard, steel wire rope usha martin make (all sizes) with test certificate. isi/iso standard, coir string , or . - do-, spring steel flat 5mm./6mm. x 40 mm. isi/iso standard, rubber conical washer . isi/iso standard, belt alligator no. 45 isi/iso standard, belt alligator no.55 isi/iso standard, m. seal. isi/iso standard, glue in 5 grams packing, isi/iso standard, lead, isi/iso standard, tin (kalai). isi/iso standard, black lead. isi/iso standard, grinding/cutting wheel (all sizes) isi/iso standard, neoprine rubber cone size: 30

CTN :45105965

21 May, 2026 NA

Bazpur - Uttarakhand

Tender For supply of hardware materials in sugar mill - m.s. washer (all sizes). isi/iso standard, m.s. rivit (all sizes). isi/iso standard, aluminum rivits (all sizes) isi/iso standard, copper rivit (all sizes) isi/iso standard, m.s. bolt & nuts b.s.w (all sizes) isi/iso standard, m.s. bolt & nuts f.t. in m.m. size isi/iso standard, m.s. nut bsw (all sizes) isi/iso standard, s.s. bolt with nuts f.t. (all sizes) grade 304 isi/iso standard, spring washer (all sizes) flat section . isi/iso standard, copper rod size- to 2 isi/iso standard, wire nail (all sizes). isi/iso standard, s.s. botl with nut (all sizes). grade 304 isi/iso standard, s.s. washer (all sizes). isi/iso standard, nyloc nut (all sizes). isi/iso standard, brass rod all size isi/iso standard, split pin (all sizes). isi/iso standard, high tensile bolts & nut. isi/iso standard, high tensile allen key bolt (all sizes) isi/iso standard, s.s. rod all size grade 304 isi/iso standard, m.s. stud, size: 10 x 100 mm. isi/iso standard, locktite-262. isi/iso standard, s.s. plate grade- 304., size: 16 mm. x 400 mm. x 370 mm. isi/iso standard, s.s. plate size: 16 mm. x 400 mm. x 370 mm. grade 304 isi/iso standard, brass sim size: 0.05 mm. x 1 mtr. x 1 mtr. isi/iso standard, do size: 0.10 mm. x 1 mtr. x 1 mtr. isi/iso standard, do size: 0.15 mm. x 1 mtr. x 1 mtr. isi/iso standard, do size: 0.20 mm. x 1 mtr. x 1 mtr. isi/iso standard, do size: 0.25 mm. x 1 mtr. x 1 mtr. isi/iso standard, do size: 0.50 mm. x 1 mtr. x 1 mtr. isi/iso standard, h.t. counter shank screw (full thread). size: 5/8 x 2 isi/iso standard, m.s. counter shank screw, size: x 3 . isi/iso standard, s.s. stud size: 12 mm. x 50 mm., do - size: 10 mm. x 50 mm., do - size: 12 mm. x 115 mm., do - size: 16 mm. x 115 mm., m.s. counter shank bolt, size: 5/8 x 1 ., do - size: x 3 ., s.s. squire head bolt, size: 14 x 35 mm., do - size: 16 x 35 mm., s.s. counter shank bolt, size: 12 mm. x 65 mm., s.s. stud, size: 12mm. x 50 mm., do - size: 10mm. x 50 mm., do - size: 12mm. x 115 mm., do - size: 16mm. x 115 mm., counter shank bolt size- " x 1 ", m.s. round plain size- " dia, do - size- 5/8" dia, do - size- 1" dia, do - size- 1 " x dia, m.s. squre size 3" x 3" both side right angle straight size 3" x 3" square x 2mtr. long, mt&ut certificate required, -do-size 4" x 4" x 2mtr mt&ut certificate required

CTN :45154680

09 Jun, 2026 NA

West Singhbhum - Jharkhand

Tender For making, fabrication and supply of the isolator lock with key made of ms plate with nut and bolt and cover with hollow pipe in face and welded including key and triangular safe with handle and zinc plating. the dimensions are given in annexure "a". key points of drawing description: (1)hollow pipe should fully cover the lock rod and move freely over it. (2) triangular portions of lock and key should facilitate smooth turning of the locking rod. (3)no extra gap should exist between the key triangular portion and the lock rod triangular portion. [ warranty period: 30 months after the date of delivery ]

Niobium Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Co-operative