Latest nitrogen storage tank Tenders | Government nitrogen storage tank Tenders

CTN :38476287

26 Dec, 2024 11.48 Lacs

Multi City - Multi State

Tender For invitation of quotation for supply of cat b stores - ac motor 3 phase 415v 1hp, 1420 rpm make: hindustan/delta, ac motor 3 phase 415v 2hp, 1420 rpm make: hindustan/delta, ac motor 3 phase 415v 3hp, 1420 rpm make: hindustan/delta, ac motor 3 phase 415v 5hp, 1420 rpm make: hindustan/delta, ac motor 3 phase 415v 7hp make: hindustan/delta, ac motor 3 phase 415v 7.5hp make: hindustan/delta, ac motor 3 phase 415v 15hp make: hindustan/delta, ac motor 3 phase 415v 30hp make: hindustan/delta, ac motor 3 phase 415v 40hp make: hindustan/delta, ac motor 3 phase 415v 3hp with water pump, ac motor 3 phase 415v 3hp 2800 rmp, tyre inflator-led double display with following specification:- (a) led display to indicate set and measured tyre pressure. vandal proof, ip-65 rated front panel metal buttons. (b) multi unit measurement facility-psi, kpa, bar and kgcm. (c) fail-safe circuitry to prevent air leakage, if sensor fails. (d) electronically adjustable screen brightness. (e) loud buzzer alarm system to alert the user about errors and when inflation is complete. (f) measurement range: 0-150 psi. (g) minimum tire pressure to start inflation: 5 psi. (h) resolution: 1 psi. (j) accuracy: +/-1 psi. (k) operating environment-50 to 65 c. 95% rh. (1) display: 3" x 3" led display. (m) power supply: 220v ac, 60 hz, single phase. (n) dimensions (only functional module) 8" x 8" x 4.5" mm (approx). double acting, reciprocating, high pressure air compressor with following specifications:- (a) max pressure: 175 psi (b) air tank capacity: 300 l (c) fad (cfm): 28.00 (d) electric motor & fittings -10 hp, 3 phase. high pressure car washer-3hp, 1ph. minimum technical specification:-

CTN :38325816

23 Dec, 2024 NA

Birbhum - West Bengal

Tender For corrigendum : procurement of spares for fly and bottom ash evacuation system for u-4 oh under ahm dept. at bktps. - chain (pitch 1-1/2 inch)additional data:chain (pitch 1-1/2 inch) for driving ofclinker grinder(model 2x3 wide clinkergrinder) of ahp-ii no. of link in chain = 172 nos, bearing support $for clinker grindermoc: ci fg-260 (is:210),part no.552-010additional data:bearing support of clinker grinder(model3" wide),material-ci fg-260 (is:210),part no-552-010-01,( 01 set = 2nos.)for ahp ii.id = 120 mm. make : indure pvt. ltd. or equivalent, split lantern ring of clinker grinderadditional data:spilit lantern ring in set of 3 pieces forclinker grinder(model a-553-l/r), moc :gun metal, o.d - 119 mm.make : indure pvt. ltd. or equivalent, wear piece -intermediate for hydro ejector200x200 moc: ms,550 bhn,part no.a-606-r,make-iadditional data:intermediate wear piece of 200 x 200 nb hydrojector,partno-216-013, material : high chrome as per is :4771 type 1(a),min 4.5% ni with 500 - 550 bhn make : indure or equivalent, nozzle plate of 200 x 200 nb hydrojector forpar 64 spoadditional data:nozzle plate of 200 x 200 nb hydrojector,partno-216-302,for ahp-ii.moc : ms, is - 2062, grade "a"., valve seat of 65nb vent -eq valve for drysystem ahp-2 bktppmoc: high chrome alloy ci, y type strainer,150nb,ci,f/f-385 #flange as per is1538 with companion flanges, hose connector,male #size: 1/2inx3/8in bsp# for crusher & slurry pump(ahp-ii), door guide rail left for ba feed gatemoc: ms,part no.547-306l,make-indure,f, door guide rail right for ba feed gatemoc: ms,part no.547-306r,make-indure,f, roller wedge $for ba feed gatemoc: ss-304,part no.547-012,make-indure, roller wedge $for ba feed gatemoc: ss-304,part no.547-012-01,make-ind, roller wedge $for ba feed gatemoc: ss-304,part no.547-012-02,make-ind, roller for ba feed gatemoc: ss-420,part no.542-018,make-indure, roller bearing for ba feed gatemoc: ci,part no.542-015,make-indure,fo, roller axle $for ba feed gatemoc: ss-304,part no.542-019-02,make-ind, nozzle tip for hydro ejector 200x200moc: ceramic lined ss,550 bhn,part no.21, tersg complete assemblyfor 250 nb ms line,size: 10",moc:body(qty-2,g4,200-230 bhn),slide(gr-4,200-230bhn),shaft(en8),for ahp, match piece,300mm long for 8 inch tersg forvacuum system sgtpp dcips as per bs-1211 cl-d,code no.19v4832additional data:8"bs 1211 class d match piece (300 mm long), bevel one end/plain on the other,moc : alloy cast iron with bhn350(min), id : 207 2 mm,od : 234 2 mm , bevel end od : 279 mm, plain end to be machined match with 8"bs 1211class d, match piece,300mm long,10 inch tersg forvacuum system sgtpp dcipsas per bs-1211 cl-d,code no.19v5032, band clamp #moc: ss# for tersg valve (10in), seal strip (tersg) 8" # part no.5seal strip (part no.5) for fly ash header valve(tersg) 8 as per drg no.28p03-t-1b-040, seat/casing guard for (tersg) 8" #seat/casing guard for fly ash header valve(tersg) 8 as per drg no.28p03-t-1b-040, spool piece both end flanged for alv rotarysegregating valve indure new delhio/d : 300/345, i/d : 205/205, pcd : 280/300, no. of bolthole: 8/8, hole dia : 12/22, flange end to flangeend distance : 122, material handling valve as for fly ashsystem induresize: 300x150,make: indure,for ahp-iiadditional data:12x6(300x150 mm) material handlingvalve assembly(right),part no-a-102x-pr,make - indure pvt. ltd., new delhi, adapter below esp hopperbetween hopper and ash intake valve, adapter below aph hopper between aph hopper and diffuser/ash intake valve, wetting head assy 200nb for fly ash systemmoc: alloy ci,part no.a-248,make: indure,forahp-iiadditional data:200 nb wetting head assembly,part no-a-248,make-m/s.indure pvt ltd. or equivalent.moc of body : alloy ci (cr. - minimum 3 %)moc of inlet piece : alloy ci ( minimum hardness - 450 bhn) moc of nozzles : high carbon, highchromium ( minimum hardness - 550 bhn), collector tank (6 thk withmoc: body-ms,liner-ss 304,size detail: ffor wetash systemadditional data:6mm thick ms collector tank con

CTN :38560511

28 Dec, 2024 10.64 Lacs

Mudigere - Karnataka

Tender For supplying of materials for sajivini shed in agrahara lakshmi pura grama gonibidu gp - qnt50 mm thick plain glass, ser1 licenced plumber with tools ser1, ser1 mixer concrete 1 cum capacity ser1, ser1 mixer concrete small used in culvert ser1, ser1 hom of welding and grinding machine ser1, ser2 hom of vibrator 0 71 days ser2, ser1 hom of cutting and grinding machine ser1, ser1 mason class i with tools ser1, ser1 mason class ii with tools ser1, ser1 painter class i ser1, ser1 stone chistler class ii ser1, ser1 labour charges for handing errection of rcc rings etc ser1, ser2 transportation charges of materials beyond 5 km10 ser2, ser2 tools & plants and electrical charges 2 ser2, ser2 add watering charges at 2 on material ser2, ser1 add watering charges at 1 on material ser1, ser1 add sundries charges at 2 on material ser1, ser1 add sundries charges at 1 on material ser1, ser1 add providing and removing scaffolding at 3 on labour ser1, ser2 add hom of welding and grinding machine 4 on material ser2, ser2 add hom of welding and grinding machine 2 on material ser2, ser2 add handling loading and unloading at 2 on material ser2, ser2 add handling loading and unloading at 1 on material ser2, ser1 add cutting and other wastage 5 ser1, ser2 add brush putty sand paper roller at 5 on cost of paint ser2, ser1 welder grade i ser1, ser1 fitter class i ser1, ser1 fabricator ser1, ser1 handling loading and unloading 3 on material ser1, ser1 labour charges for lifting and placing in position and making connection at 7 on material ser1, pvc pipe of 4kgs cum 63mm qnt, fabrication charges qnt , cost of 6 5mm m s coil qnt, indian type water closet of size 580 mm of specified make with footrests qnt, white vitreous china clay flat back wash basin size 630x450mm qnt, vitrified tiles 600x600 mm qnt, ms angle iron 50mm x 50mm x 6mm 33 8 metre in length at 4.5 kgs per metre qnt, ms angle iron 40mm x 40mm x 6mm 23 metre in length at 3 5 kgs per metre qnt, gusset plates 6 mm thick qnt, copper plated brass piller tap qnt5mm qnt, brick bats 25 to qnt00 mm qntqnt, base plate base plate qnt, anchor bolts 750mm qnt, rcc cap qnt000 mm diaqnt00 mm thick qnt, bolts and nuts qnt, ms flat qnt, unit cost as per the specification qnt, brick bats 25 to qnt00 mm qnt, c i m s brackets for flushing cistern qnt, mr9609 add qnt, whitening qnt, tmt bars fe 500 qnt, size stone 20 x 20 x 25 cms qnt, silver oak or equivalent planks 38 mm thick qnt, rubber beading for shutters beading qnt, ready mix primer paint ready mix red lead paint qnt, nylon rollers qnt, mathi nandi wood planks for panels 25 mm thick qnt, mangalore tiles first class and special tile for ridges and hips qnt, lead or pvc connection pipe 32mm dia for wash basin qnt, jungle wood runners and planks qnt, honnewood planks for panels 20 mm thick qnt, honne wood qnt, granite trap broken metal qnt00 mm and down size qnt, granite metal 40 mm qnt, granite metal 20 mm qnt, enamel metal paint qnt, corbon electrodes qnt, cleat angles qnt, chrominum plated screws qnt, ceramic tiles of size qnt 30 x 30 cms, casurina poles 75 qnt00mm dia, casurina poles qnt00 qnt50mm qnt, cp brass waste 32 mm of standard pattern qnt, cp brass chain with plug qnt, burnt bricks class 35 qnt, broken stone aggregate 40 mm size qnt, broken stone aggregate 20 mm size qnt, broken stone aggregate qnt2 mm to qnt0 mm size qnt, brass stop cock qnt, boulders qnt, bond stone 20 x 20 x 45 cm qnt, aluminium window frame section qnt 20 mm thick qnt, alluminium tower bolt 20 cm qnt, alluminium handles qnt5 mm qnt, glazed tiles 300x450 qnt, polyenthylene water storage tank of specified capacity l qnt, m s rods qnt, border tiles 30 x qnt0 cms qnt, table moulded bricks of class designation 50 qnt, c i manhole cover with frame qnt, binding wire qnt, plasticizer super plasticizer qnt, display board qnt, pvc edge beadingqnt, water proofing materialsqnt, coarse sandqnt, plastic emulsion paintqnt, dry distemperqnt, portland cementqnt

CTN :38588454

06 Jan, 2025 NA

Budgam - Jammu And Kashmir

Tender For supply of socket,socket,socket,socket,socket,socket,socket,socket,stop cock,bib cock,bib cock,bib cock,bib cock,pillar cock,bib cock,water storage tank,water storage tank,flushing cistern,tape,ewc,geyser,wc,whb,waste pipe,bib cock,towel rail,urinal pot,metal gate,metal gate,pipe,pipe,pipe

State Government

CTN :38560547

24 Dec, 2024 23.01 Lacs

Multi City - Karnataka

Tender For procurement of material for contruction of grey water management works cc drain, soakpit, septic tank, wetland in lakya village of lakya gp in chikkamagaluru taluk and district - stone aggregate(single size) 20 mm nominal size (lak) , waterproofing compound at one kg per 50kg (lak) , pvc pipe of 6kg cum200 mm (lak) , granite metal 40 mm(lak) , mild steel 6 mm dia (lak) , table moulded bricks of class designation 50( non modular (lak) , c.i manhole cover with frame (lak) , granite/trap broken metal 100 mm and down size (lak) , aqua nylon mesh (lak) , charcoal (lak) , cost of 6.5mm m.s. coil(lak) , fabrication charges (lak) , rcc cap 1000 mm dia, 100 mm thick(lak) , size stone 20 x 20 x 25 cms(lak) , bond stone 20 x 20 x 45 cm (lak) , boulders (lak) , mason class ii (with tools) (lak) , stone chistler class ii (lak) , solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm (lak) , water proofing cement paint (lak) , painter class i (lak) , pvc pipe of 4kgcum,63 mm (lak) , burnt stone slabs 10 cms thick (lak) , plasticizer / super plasticizer (lak) , broken stone aggregates 40mm size (lak) , broken stone aggregates 20 mm size (lak) , broken stone aggregates 12 mm to 10mm size (lak) , coarse sand (lak) , portland cement (lak) , mixer (concrete )-1 cum capcity(lak) , tmt bars fe 500 (lak) , binding wire (lak) , add 24% centering charges (lak) , water tanker (lak) , name board (lak) , solid concrete blocks (40 x 20 x 20 cms)-4.00 n/sqmm (lak) , mason class i (with tools) (lak) , pvc pipe of 6kgcum 75 mm(lak) , stone aggregate(single size) 40 mm nominal size (lak)

State Government

CTN :38560551

24 Dec, 2024 38.22 Lacs

Multi City - Karnataka

Tender For procurement of material for gwm works like cc drainage, septic tank, wetland and community soak pit in k.b.hall village of k.b.hall gp chikkamagaluru taluk and district - granite or trap broken metal 100 mm and down size kbh,coarse sand kbh,stone aggregate single size 40 mm nominal size kbh,stone aggregate single size 20 mm nominal size kbh,aqua nylon mesh kbh,charcoal kbh,broken stone aggregate 20 mm size kbh,broken stone aggregate 12 mm to 10 mm size kbh,portland cement kbh,plasticizer or super plasticizer kbh,mixer 1 cum capacity kbh,cost of 6 5mm ms coil kbh,fabrication charges kbh,rcc cap 1000 mm dia 100 mm thick kbh,size stone kbh,bond stone kbh,boulders kbh,mason class 1 kbh,mason class 2 kbh,stone chistler class 2 kbh,solid concrete blocks 40 15 20 cms kbh,water proofing cement paint kbh,painter class 2 kbh,pvc pipe of 63 mm kbh,name board kbh,burnt stone slabs 10 cms thick kbh,broken stone aggregate 40 mm size kbh,solid concrete blocks 40 20 20 cms kbh,tmt bars fe 500 kbh,binding wire kbh,waterproofing compound at one kg per 50kg kbh,pvc pipe of 200 mm kbh,granite metal 40 mm kbh,granite metal 20 mm kbh,mild steel 6 mm dia kbh,table moulded bricks of class designation 50 non modular kbh,c i manhole cover with frame kbh,pvc pipe of 75 mm kbh,centering charges kbh,water tanker kbh

State Government

CTN :38560555

24 Dec, 2024 44.21 Lacs

Multi City - Karnataka

Tender For procurement of material for gwm works like cc drainage, septic tank, wetland and community soak pit in k.b.hall village of k.b.hall gp chikkamagaluru taluk and district - granite or trap broken metal 100 mm and down size kbh,coarse sand kbh,stone aggregate single size 40 mm nominal size kbh,stone aggregate single size 20 mm nominal size kbh,aqua nylon mesh kbh,charcoal kbh,broken stone aggregate 20 mm size kbh,broken stone aggregate 12 mm to 10 mm size kbh,portland cement kbh,plasticizer or super plasticizer kbh,mixer 1 cum capacity kbh,cost of 6 5mm ms coil kbh,fabrication charges kbh,rcc cap 1000 mm dia 100 mm thick kbh,size stone kbh,bond stone kbh,boulders kbh,mason class 1 kbh,mason class 2 kbh,stone chistler class 2 kbh,solid concrete blocks 40 15 20 cms kbh,water proofing cement paint kbh,painter class 2 kbh,pvc pipe of 63 mm kbh,name board kbh,burnt stone slabs 10 cms thick kbh,broken stone aggregate 40 mm size kbh,solid concrete blocks 40 20 20 cms kbh,tmt bars fe 500 kbh,binding wire kbh,waterproofing compound at one kg per 50kg kbh,pvc pipe of 200 mm kbh,granite metal 40 mm kbh,granite metal 20 mm kbh,mild steel 6 mm dia kbh,table moulded bricks of class designation 50 non modular kbh,c i manhole cover with frame kbh,pvc pipe of 75 mm kbh,centering charges kbh,water tanker kbh

corporations/Associations/Others

CTN :38546015

19 Dec, 2024 NA

Bangalore - Karnataka

Tender For auction sale of m.s. heavy melting scrap,m.s. melting scrap / rusted obsolete ms sheets,ms turning boring scrap,stainless steel scrap in assorted sizes / shapes,scrapped ms packing sheet,scrapped ms bale patty,condemned /scrapped small size plastic pvc empty spools,condemened/scrap/used plastic chairs,aluminum scrap in assorted sizes/shapes,condemned/scrapped electrical items,cond/scrapped electrical items such as isolator switches,m s mixed scrap-cond/ scrapped acid pickling tank,m s mixed scrap,cond/scrapped packing cartons box waste/packing cartons,ms punching scrap,ms gas cut/flame cut powder (burrs)/slag only,cond/scrapped old machine sets and its accessories,cond/scrap /used band sawing machine,cond/scrap bystronic cnc laser cutting machine,scrapped wood in assorted sizes & shapes,cond broken /damaged/ bulged (20 to 30 liters capacity) empty metal paint drums,cond. broken/damaged/bulged 200/210 lts &220 kgs capacity,condemned pvc empty plastic carbous, buckets,scrapped pvc insulated copper wire / cable end bits,condemned /used coolant oil in 200 / 210 ltrs,cond/used/scrapped batteries of assorted sizes,condemned empty silicon/anti spatter spray cans

Central Government/Public Sector

CTN :38157116

27 Dec, 2024 1.30 Crore

Agra - Uttar Pradesh

Tender For corrigendum : special repair for renewel of e/m items and plant/ machinery held in charge of age (e/m) rnd agra cantt under ge (i) rnd delhi - supply , installatation , testing and commissioning of diesel driven generating set to give an out put of 500 kva, 415v ac supply 3 phase, 50 hz, 4 wire radiator mounted on common base plate complete with fuel tank, vibration damper and other accessories with fuel tank viberation damper and other accessories with acoustic enclouser as per latest cpcb-iv norms and amf panel including pcc foundation work as per oem reccommandation and taking out the old dg set from the location and deposited to mes store yard complete all as specified and directed, interanally comprising of following :-(a) diesel driven engine :- developing a net output suitable matched to give a net rated output of minimum 604 hp/suitable to drive 500 kva alternator, at 0.8 power factor 415 volts. the engine should be capable of delivering the required output at 1500 rpm, water cooled, self start, with a provision of 10% overload for one hour in every 12 hours with the following accessories and all as specified.(i) fly wheel to suit flexible coupling and fly wheel housing.(ii) air cleaner complete as per manufacturer specification. (iii) fuel injection pump. (iv) flexible coupling with guard, nuts and bolts.(v) fuel filter with mounting. (vi) oil filter with mounting.(vii) starter motor as per manufactures design.(viii) exhaust, silencer industrial type with exhaust pipe suitable length.(ix) batteries 12 volts 2x180 ah maintenance free batteries with copper lead, terminals etc.(x) instrument panel complete with microprocessor based controller comprising shut down valve indication, lcd hour counter indication, rpm indication , led lamps for fail to start, over speed /under speed . low lub oil pressure, high engine coolant temperature. gaugae.(xi) dynamo/alternator suitable rating., (b) alternator :-the above engine will be coupled through flexible coupling on an indigenous alternator mounted on a strong steel fabricated common base frame suitable for mounting in an acoustic enclousre. the alternator will be 3 phase 50 hz 1500 rpm self regulating self exciting type and have class h insulation of stator and rotor windings and generate 500 kva output at .8 power factor 4 wire 415 volts ac supply under ntp condition with a provision of 10% overload for 1 hour in every 12 hrs running. the alternator would be screen protected and fitted with shield ball/roller bearing, automatic voltage regulator.(c) control panel :- s&f amf (automatic on mains failure) control panel cpri approved outdoor ype kiosk water, dust and vermin proof and fabricated out of 3.15 mm thick crca sheet and 50mm x 50mm x 6mm angle iron powder coated suitable for 415 volts 3 phase 50 hz ac supply with and incl the following :-(i) mccb of suitable capacity(ii) necessary relays, times and power contractors of suitable rating/capacity for auto on-off the dg set and changeover of the load in case of power failure.(iii) digital mulfifunctional meter for phase wise reading of amps, voltage kwh and frequency -01(iv) internal wriring with single core solid copper conductor cable of appropriae gauge incl mumbering ferrules and control fuses.(v) earthing terminals 02 nos(vi) auto/manual start switch to by pass auto start.(vii) battery charging system suitable for charging for charging the battery provided with the dg set incl boost/stickle switch and system, dc voltmeter digital type., (d) fuel tank :- one no built in sheet metal steel tank mounted inside the acoustic encloser and of adequate capacitynot less than 740 ltr with inlet and outlet connection including the following :-(i) level indicator with float and gauge.(ii) fuel piping for fuel supply to engine and over flow to tank(iii) fuel strainer(e) acoustic enclosure :- enclousre be designed for reducing the sound level up to 75+/ 5db (average) as per is 8528 part 10 and as per approved cpcb morms. the acous

State Government

CTN :38065194

23 Dec, 2024 16.51 Lacs

Jamnagar - Gujarat

Tender For corrigendum : supply and application of metal protective compound for fire water storage tank & fire water pipes lines & related structure of unit no. 3 & 4 at sikka tps.

Nitrogen Storage Tank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector

State Government