Latest non return valve Tenders | Government non return valve Tenders

Corporations/Associations/Others

CTN :40955745

18 Jul, 2025 12.66 Lacs

Multi City - Karnataka

Tender For supplying of water supply materials for yearly tender of the year of 2025-26 - extra blade (size 24x2x0.100) (rate as per market rate)bkr, teflon tape (tape size 12 mm x 10 mtr) (rate as per market rate)bkr, solvent cement (rate as per market rate)bkr, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and valves and provision for corresponding dia ms flanges etc. complete for sluice valve of pn -10.0 and 80mm (item no. 2.23.2 page no. 22 volum-5 pwd sr-2023-24)bkr, size 80 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, size 65 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply and delivery at site of brand new best make non-return valve as per is 778/1984 with isi mark and as per its latest amendments size 50 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni, outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 indoor type note 1) dol- direct online starter 2) s-d- star delta starter etc. complete. for outdoor 3 to 6 hp pumps (item no. 13.24.2 page no. 155 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni with phase selector switch, isolating switch outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 no. electrcal protection like single phase preventor. upto 3 hp pumps (item no. 13.23.1 page no. 154 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 135 lpm at 110 m equl 12 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 155 lpm at 84 m equl 10 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-2000, 3phase, ss bowl and impeller with low volt motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. for 3 hp etc. complete 6.50 hp - 245 lpm at 70 m equl 8 stg outlet dia - 2.50 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing, single phase submersible pump sets of 100mm dia (4 inch) suitable for bore well confirming to is 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete 2.00 hp/1.5kw 20 stg (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24) bkr, supply of isi mark 175mm nominal bore, plain and steel casing pipe grade of steel fe 410 of wall thickness conforming to is 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to is 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends. isi marking weighing 25.10kg/m.prices include collar-medium duty. (item no. 12.32 page no. 134 volum-5 pwd sr-2023-24)bkr, for 150 mm dia gi tee (item no. 11.9.11 page no. 130 volum-5 pwd sr-2023-24)bkr, for 125 mm dia gi tee (item no. 11.9.10 page no. 130 volum-5 pwd sr-2023-24)bkr, for 100 mm dia gi tee (item no. 11.9.9 page no. 130 volum-5 pwd sr-2023-24)bkr, for 80 mm dia gi tee (item no. 11.9.8 page no. 130 volum-5 pwd sr-2023-24)bkr, for 65 mm dia gi tee (item no. 11.9.7 page no. 130 volum-5 pwd sr-2023-24)bkr, for 50 mm dia gi socket (item no. 11.9.6 page no. 130 volum-5 pwd sr-2023-24)bkr, for 40 mm dia gi tee (item no. 11.9.5 page no. 130

State Government

CTN :40950747

18 Jul, 2025 1.77 Crore

Srinagar - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of 2 no. chillers with cooling tower in central ac plant of main hospital at skims soura - sitc of vfd based, ahri/ eurovent certified, water-cooled, mono/ twin screw type chiller of capacity not less than 100 tr with allied items. the item shall be complete and ready to be connected with main headers in the existing central air conditioning plant of skims soura. the chiller shall be accompanied with microprocessor based control panel with all safety, switch gears needed for safe, smooth and hassle-free operation. the job includes laying of foundation as per oem recommendation which shall be not less than 6 inches above the finished floor level. the technical specifications are further detailed in annexure b., sitc electric-motor driven centrifugal pump for condenser and chiller sides having a discharge of 15 to 18 litres per second, head of 30 metres, 1450 rpm. the technical specifications are furhter detailled in annexure b., insulated chilled water piping (nitrile rubber insulation)supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 kg/ cum density, thermal conductivity 0.037 w/mk or better at 20 deg mean temperature class o insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.note: the pipes of sizes 150mm & below shall be m.s. c class as per is: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per is: 3589, from minimum 6.35mm thick m.s. sheet for pipes upto 350 mm dia., 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulationthickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulation thickness), 100 mm (32mm nitrile insulationthickness), 80 mm (32mm nitrile insulation thickness), 65 mm (32mm nitrile insulationthickness), sitc of butterfly valves with di body double flanged construction with epdm coated disc with long pitch and pn 16 pressure rating as per is 13095 (1991), 250 mm , 150 mm , 125 mm , 100 mm , 80 mm , 65 mm , providing and fixing of aluminum cladding of 0.63 mm thick sheet to the insulated pipelines including bends, valves, fittings, etc. the job includes grooving, providing and fixing of screws, washers etc. as per is : 2676 - 1981, 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulation thickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulationthickness), 100 mm (32mm nitrile insulation thickness), 80 mm (32mm nitrile insulationthickness), 65 mm (32mmnitrile insulation thickness), sitc of ductile iron non-return valve of following size with allied jobs as per site requirement. the valve shall be conforming to is-5312. pressure rating : pn16, 150 mm , 125 mm , 100 mm , sitc of y-strainer (ci) flanged end, of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , 100 mm , 80 mm , sitc of balancing valve (ductile iron) of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , sitc of t-strainer (c.i.) of following size with allied jobs as per site requirement. pressure rating : pn16, 250mm , sitc of fully stainless steel pressure gauge (bourdon beryllium copper, socket ss316l, case and bazel ss304), rugged construction with epdm blowback, safety glass. 0-40 kg/cm , dual display bar/psi or selectable, sitc in position the bi-metal dial thermometer temperature guage 4 dail size bsp (m) connection, ss case and ss wetted parts completer as required, sitc of air release valve of following size. air release valves shall be provided at all higher points in piping system for venting., 25 mm dia , sitc

Central Government/Public Sector

CTN :40962718

25 Jul, 2025 NA

Surat - Gujarat

Tender For supply of gate valves and non return valves d d - 3 inch nrv , 4 inch nrv , 6 inch nrv , 12 inch nrv , 2 inch gate valve , 3 inch gate valve , 4 inch gate valve , 6 inch gate valve , 12 inch gate valve

Central Government/Public Sector

CTN :40962967

24 Jul, 2025 3.73 Lacs

Sidhi - Madhya Pradesh

Tender For supply of spares for compressor d d ? g? g - pressure gauge-part no.95325148 , drain valve 1by4- part no.95081022 , elbow-part no.95229183 , pressure switch 100-200 psig-part no.97046932 , aux valve-part no.94465002 , safety valve-part no.72062078 , dischrge tube-part no.97045470 , union tube flare 1- part no.97051734 , tune up kit-part no.37693275 , assembly tube 36 inch-part no.32024697 , assembly tube 38.3by4 inch-part no.32025678 , screw-part no.96309359 , o ring-part no.95018149 , gauge pressure-part no.9630942096 , 37004827 halve complete 35ca-part no.37004827 , valve safety 190 p.s.i. h.p.un-part no.9630942089 , valve assy-part no.w75300t50xn , 32007163 set for piston ring-part no.32007163 , cleaner inlet air-part no.96309265 , switch pressure-part no.92589452 , switch low oil level complete-part no.96309268 , non return valve assy-part no.000314712

Corporations And Associations And Others

CTN :40950034

11 Jul, 2025 83.6 Thousand

Panipat - Haryana

Tender For a/mtc. of ephs (w/s) in sector-11 & 11 hbc, u/e panipat. repairing & mtc. of submersible pumping machinery including motor pump electrical control panel with starter submersible cable & other wiring, kit kats and all accessories, sluice valve (sv), non return valve (nrv), etc. of tubewells and all others works contingent thereto.

CTN :40962823

25 Jul, 2025 NA

Uttara Kannada - Karnataka

Tender For tender for supply of marflex pump spares d d - o-ring viton , o-ring viton , o-ring viton , o-ring viton , o-ring , viton , o-ring viton , o-ring viton , oil seal , purging set deepwellpump , hose shank , hexagon head screw , hexagon head screw , hexagon head screw , hexagon head screw , socket head cap screw , socket head cap screw , threaded rod l-110mm , circlip , circlip , ball bearing , ball bearing , air pressure reducer/filter , manometer , air hose , 15 mtr , quick coupling , female , ceramic sleeve , intermediate coupling , bearing holder , nitrile , bearing , railco , wear ring , wear ring support , seal support , upper , seal support , lower , long shaft upper l-4910mm , lower pin , gasket , lock pin , impeller bolt , plug , frame , double cargo seal , single cargo seal , seal support ring , ball bearing , cyl. rol. bearing , non return valve , pump shaft , impeller dia 310mm , gasket , upper sleeve , hose shank

CTN :40950954

18 Sep, 2025 NA

Delhi - Delhi

Tender For procurement of spares for mig-29 upg aircraft - ac monitoring & distribution eqpt, dc relay box (30e), cabin dc monitioring distribution equipment, ac relay box (81e), dc relay unit, druzhina, sps assy, copilot seat, grant shift s/w, sensor of cylinder lock position, control relay box kpcy 80 d, cabin dc monitioring and distribution equipment, dc monitioring and distribution equipment, dc power panel, panel of power safety unit 174 e, potentiometer, non-return valve, automatic relay unit, fiber rotation sensor, micro switch, communication box (12 us), ac relay unit, switching box of radio communication, dc monitioring and distribution equipment, ac monitioring and distribution equipment, dc monitioring and distribution equipment, time relay, dorsal tank