Latest nylon sleeve Tenders | Government nylon sleeve Tenders

CTN :41487925

29 Aug, 2025 NA

Sonitpur - Assam

Tender For supply of roller ring , part set of seal , gasket for feed pump , cam shaft , sliding sleeve , fulcrum , sealing kit , service kit , roller kit , friction washer

CTN :41453903

25 Aug, 2025 NA

Navsari - Gujarat

Tender For expression of interest for providing, making and supplying furniture & furnishing items at all centres of navsari agricultural university (unit rate offer) - providing, supplying & installation of snap-fit modular wall paneling using 8mm pre-laminated cement fiber board the framework shall consist of 0.55mm thick cold-rolled g.i. perimeter channels (30x27x20mm) fixed at 600mm centers with nylon sleeves and wood screws. w shaped ceiling sections (26x50x26x80mm, gyptech or equivalent) shall be inserted horizontally and vertically to create a 600x600mm grid (or as per design) and fixed using appropriate screws.work includes marking levels on walls/partitions as per design, leaving allowance for panel thickness. installation shall use 8mm thick wood-textured pre-laminated cement fiber boards (make approved by nau authority) fixed in a modular snap-fit system.packing of solid pvc/marine ply to be provided as required. aluminum grid sections (24x9mm) extruded from 6063 grade alloy shall be fixed to the ceiling section, or directly on the wall/partition where space constraints exist. panels will be secured using 14x13mm snap-fit powder-coated or anodized aluminum clips. all work to be executed in true line and level, with approved finish and as per directions of engineer-in-charge., providing, supplying & installation of 12mm x 120mm prelaminated solid core wall paneling work includes providing and installing 12mm thick x 120mm wide prelaminated solid core wall panels (e-3 clad) with a seamless joining system. wall/surface to be prepared and marked for alignment and design. a grid of 50mm x 15/20mm solid pvc strips (density 550600 kg/m) shall be fixed to the wall at 600mm x 600mm spacing using screws. panels shall be mounted using double-sided adhesive tape and silicone adhesive (dow corning or equivalent). all work shall be completed in true line, level, and finish as per design and instructions of the engineer-in-charge., providing, supplying & installation of vox / pare brand thermal printed wall & ceiling paneling work includes supply and installation of 3mm thick x 340mm wide vox/pare brand thermal printed panels approved by nau authority) with a tongue-and-groove joining system for ceiling and wall paneling. levels shall be marked as per design, allowing for panel thickness. 0.55mm thick g.i. perimeter channels (30x27x20mm, make approved by nau authority) shall be fixed to walls/partitions at 600mm centers using nylon sleeves and wood screws. a 1200x1200mm hanger grid shall be marked on the ceiling/slab. 0.55mm thick g.i. hangers (18x18mm), cut 6" longer than the drop, shall be fixed to the slab and intermediate channels using self-drilling screws. 0.9mm thick c-sections (15x45x15mm) will be suspended at 12001500mm centers. overlaps of 6" shall be provided for extended lengths. 0.55mm thick w-sections (26x50x26x80mm) shall be fixed perpendicularly at 450600mm centers to form the ceiling grid. panels will be screw-fixed to the frame with longitudinal alignment across ceiling sections. panel joints will be finished using matching brand j sections (19x40mm) or connector profiles (76x12mm). all joints and caps will be bonded with cyanoacrylate adhesive (make approved by nau authority). work must be executed in true line, level, and finish as per approved design and under the supervision of the engineer-in-charge., providing, supplying & installation of snap-fit modular wall paneling using 12mm prelaminated wood chip particle board work includes installation of 12mm thick prelaminated wood chip base particle boards (make approved by nau authority) in a modular snap-fit paneling system. mark levels on walls/partitions as per drawings. fix 0.55mm thick g.i. perimeter channels (30x27x20mm, make approved by nau authority) at 600mm centers using nylon sleeves and wood screws. install 0.55mm thick w shaped ceiling sections (26x50x26x80mm) vertically and horizontally to form a 600x600mm grid, or as per design, secur

CTN :41403698

22 Aug, 2025 NA

Hoshiarpur - Punjab

Tender For supply of spare parts required for tata 1212 and 1613 - 1460422368 sliding sleeve , 1461074328 sealing plate , 1463104614 tdpiston , 1467030308 supply pump , 1468376023 hyd head , 2464633002 compression spring , f002c40020 noozle , f00vc17503 nozzle washer , 2460140021 cross disc , 0433172377 noozle

Central Government/Public Sector

CTN :41425209

03 Sep, 2025 NA

Salem - Tamil Nadu

Tender For supply of lever right 300 for entry looper dolly , lever left 300 for entry looper dolly , lever right 380 for entry looper dolly , lever left 380 for entry looper dolly , lever right 460 for entry looper dolly , lever left 460 for entry looper dolly , lever right 540 for entry looper dolly , lever left 540 for entry looper dolly , lever right bot 380forentry looper dolly , lever left bot 380for entry looper dolly , lever right bot 460forentry looper dolly , lever left bot 460for entry looper dolly , sliding block for entry looper dolly , bolt2-guide wheel for entry looper dolly , plate 1 for entry looper dolly , hook 1 for entry looper dolly , bolt 1 for entry looper dolly , cross beam for entry looper dolly , hook 2 for entry looper dolly , guide wheel for entry looper dolly , eccentric bush for entry looper dolly , sleeve for entry looper dolly , bolt1 exit looper car-entry looper dolly , pulley for exit looper , centre shaft for pulley exit looper car , tension lock for exit looper car , sleeve for exit looper dolly , spindle for looper rope drum , nut for looper rope drum

CTN :41011322

16 Aug, 2025 NA

Ri Bhoi - Meghalaya

Tender For bid to ras supply of ply wood commercial as per is-3003 l 8ft w 4ft thickness 12mm bwr , mirror looking l 20 inch w 16 inch with pvc frame , bathroom cabinet mirror pvc , plywood commercial l 7 ft w 3ft thickness 12 mm bwr , kitchen sink 36 inch 18 inch 7 inch stainless steel with drainage board , plywood commercial l 8 ft w 4ft thickness 4 mm , bib cock cp 15 mm , cp health faucet with hook and 1 mtr tube15mm , pillar cock fancy type 15 mm cp , bib cock cp long body 15 mm , cp angle cock 15 mm , bib cock brass 15mm , flushing cistern pvc low level 10 ltr capacity complete , kitchen rack s s l 24 inch w 30inch d 10inch , stop cock brass 15 mm external thread , bitumin felt l 20 mtr w 1 mtr 3 mm thick , float valve pvc 20 mm , pvc pipe 40 mm 3 mtr long , cp tubular towel rail 20 mm dia 600 mm long body , glass shelf straight 20 inch with cp railing 15mm , glass shelf corner l 12inch w 12 inch with cp railing 15mm , bib cock pvc 15mm , single lever basin mixer 6 inch , hydraulic door closer isi marked , sink mixer cp 15mm , stop cock cp 15 mm internal thread , cp soap dish , gate valve brass 15 mm , seat cover plastic for ewc white colour , gi tubing med gde 20 mm is 1239 , pvc waste coupling 50 mm for stainless steel kitchen sink , telescopic channel 12 to 24 inch , waste pipe pvc 32 mm , shower rose cp 15 mm , paint enamelled og in 1 ltrs pack high glossy , paint enamelled grey in 1 ltrs pack high glossy , pvc seat for chair dining , door stoper alumunium double , float valve pvc 25 mm dia , cpvc reducer socket l 20mm w 15mm brass , red oxide primer 1 ltr in pack , curtain rod aluminium silver 20mm , bib cock pvc long body 15mm , fevicol sh 1 kgs pack , aluminium door handle 150mm , aluminium door handle 100mm , cp towel ring round pil4504b , curtain rod holder lattu 20mm silver , toilet paper holder with stainless steel flap 15mm , sliding door bolt alu 300mm rod dia 16 mm , cpvc pipe 15mm , cpvc mta brass 20mm , pvc angle cock 15 mm , paint enamelled black in 1 ltrs pack high glossy , pvc seat and back for chair verandah offrs , tower bolt alu 150 mm dia 12mm , nipple gi 15 mm 6inch long , cpvc socket brass 20mm , cpvc mta brass 15mm , pvc stop cock internal thread 15mm , cpvc pipe 20mm , cpvc fta brass 20mm , cpvc tank connector mt oblique ft 20mm , cpvc ball valve 15mm , helicol door spring 150mm , cpvc plain elbow 20mm , grating pvc 125 mm , pegs alluminium 100 mm , cpvc socket plain 20mm , pvc tank nipple 20mm , cpvc plain tee 20mm , pvc flush bend 40 mm , cpvc plain elbow 15mm , nylon sleeve 35mm pvc wall plug , cpvc socket plain 15mm , cpvc plain tee 15mm , cpvc pipe clip 20mm , cpvc union plain socket 20mm , cpvc fta plastic 20mm , cpvc end cap 20mm , grating cp 100 mm with hole , enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3)

CTN :41290715

13 Aug, 2025 NA

Hisar - Haryana

Tender For bid to ras supply of anchor spikes, screne latrine, complete, brake drum remover, dust cover, sliding hammer, trim door lh, 3/8 hose demister line to swc bracket, oil seal, (od35xid19xw10), sleeve seal seat, spring leaf, flange, nylon brush 5cm, width x20cm, wind shield glass(5.76 thk) e certified, assy drive shaft, right complete, battery cable (ve), door glass rh, dual brake valve, fixing bracket assy, gasket, gasket oil drain, hose flexible, insul washer, oil seal, oil seal, pipe (engine outlet to, radiator inlet), rear brake, chamber/acuator, assy, repair kit for air, filter consisting, rotor final assy, rubber mounting

CTN :41290897

19 Aug, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of thermometer , temprature sensor fr-98703000034 , transmitter , pressure transmitter , transmitter , sliding distributor fr-98725900001 , a washer 65 , pressure transmitter , o-ring , o-ring , gasket (figure 5 , item 33) , micro console card , o-ring , nut , gasket , gasket , o-ring , snap ring 10x1 , washer , schnorr washer , bearing sleeve , t319-3 , sliding rail , bearing shells (lines 51 & 52) , gasket a 21x26 cu b1 , liner o-ring , o-ring , peel shim , washer , small end bush , cover , washer , receptacle seal for distributor 541 iso 1 , resilient pad vibrachoc e1n-3391-01 , o-ring (rear bearing of compressor pinion shaft) , t312-9 , h nut m-14 , washer , plug , snep nut h130 m16-200 , element 68 / 78c ch7 / pl10 / 29 , back-up battery tsx bat m01 , pin , wire sealing and lead for safety locking , fuel make up pump , star filter element , fr-xxbnn151349 , clip dn 113 , o-ring (front bearing of compressor pinion shaft) , lock tab , roller , lower gasket , spring , lock tab , nut , motor compressor cover o-ring (timing gear side) , motor compressor casing o-ring , cotter pin m10-20 , o-ring (shaft assembly) , gasket , sealing bush , a gasket33x39 , stop washer engine side , lock tab , gasket a 10-15 , handling of cylinder head , lock tab , o-ring (for diffuser) , position switch , tempreture sensor , o ring , gasket , o-ring r11 (-953/954) , bearing shell , sealing ring , o-ring , ball joint , ball bearing , lock tab , lock tab , lock tab , lock tab , lock nut , o-ring di 30x4 21a7 , e pin 12-30 , seal washer bs c18 20a8 , cetering pin , expansion bellows , gasket , lock tab , gasket 4 holes 120x120x1 , 2 , shim , o-ring , snep nut h130 m10-150 , pin , stop washer , guiding bush , air distributer , rear sleeve bearing , driven feeding pump , gasket , t312-10 , h screw m14-60 , t3011-1 , half-crown , t307-1 , cap , o-ring r14 (-952 / 953) , sealing ring , o-ring , gasket , ball joint , bush , gasket (-951/953) , o-ring r35 (-953 / 954) , temperature sensor , broach assembly gasket , lock tab , lock tab , lock tab , o-ring , clutch gasket , ring (ch7-pl5-83) , top ring , gasket kit , gasket , gasket , filtering element , t307-3 , driving dog , expansion bellows , air filter , scraper ring , compressor front bearing labyrinth gasket , lock nut , stop pin , exhaust valve fr-xxbnn151341 , o-ring fr-xxbnn151345 , o-ring fr-xxbnn151342 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , tools for cyl head fr-xxbnk151342 , combustion chamber cock fr-xxbnn151341

CTN :41216611

20 Aug, 2025 NA

Birbhum - West Bengal

Tender For procurement of spares of vm-12 breaker for u-2 and 5 overhauling under emi dept. at bktps - shroud,finger contact $for vcb 6.6kv bhel vm-12,drg no:15212001530-001additional data:shroud for finger contact for vcb vm-12 1250a,only cover of finger contact; drawing no: 15212001530-001, coil,shunt trip/close for vaccum circuit breaker 6.6 kv vm12 25211001563-009 bhel-bhopal es 900085additional data:coil shunt trip/ closing, bhel vcb, 6.6 kv, 220v dc, es 900085drawing no:25211001563-009, trip unit assembly for 6.6kv vcb for 6.6kv vm12, bhel make bhel-bhopaldrawing no-35211001918-v00.additional data:drawing no: 35211001918-v00, tripping spring,drg.no35211001516-001 for 6.6 kv vcb bheladditional data: tripping spring, 6 dia.drawing no:35211001516-001, closing and tripping knob for vcb 6.6kvfig no:5,item no-13 of bhel manual,documentno.bp-om-179/182/505-0091additional data:drawing no:45211001599-v01, plug socket assy bhel vcb 6.6kv 32 wayadditional data:vcb vm12, 1250 a; drawing no:35212001745-v01, motor cut off limit switch for circuit breaker 7.2kv vm12 bheldrg.no.25212001514-002additional data:drawing no:25212001514-001, insulating barrier for vcb 6.6kvfig no:1,item no-16 of bhel manual,documentno.bp-om-179/182/505-0091additional data:type:vm-12,1250a , fig no:1,item no-16 of bhelmanual,document no.bp-om-179/182/505-0091;drawing no:35211001541-v01, bush for vaccum circuit breaker 6.6 kv vm1245211001545-001 bhel-bhopalwith inner gasket of neoprenerubber,l-15mm,od-18mm,id-12mmadditional data:with inner gasket of neoprenerubber,length-15mm,od-18mm,id 12mm,for vm-12.drawing no:45211001545-001, aux switch 8no 8nc for 6.6kv vcb,bhel #additional data:52 a/b contact switch, 8no-8nc,for 6.6 kv vcb,vm-12, 1250a; drawing no:05212001510-v03, contact aux 6.6kv vcb breaker 6no 6ncadditional data:52 a/b contact switch, 6no-6nc, for 6.6 kv vcb,vm-12, 1250a;drawing no:05212001510-v02, operating drive assembly 15212001525-v00bhel-bhopal for operating 52-a/b contact assembly of 6.6 kv, vm12 vcbadditional data:operating drive assembly (inside breaker trolley) for operating 52-a/b contact assembly;drawing no:15212001525-v00, operating drive assembly #inside breaker trolley for operating 52-c/d contact assembly# for vm-12,6.6kv vcbadditional data:operating drive assembly (inside breaker trolley) for operating 52- c/d contact assembly.drawing no:15095001530-v02, closing damper for 6.6kv vcb vm-12 1250a # bheladditional data:vm-12 1250a ;drawing no:35211001720-v00, gear box for circuit breaker 7.2kv vm12 bhel drg no: 05211001502-02additional data:drawing no: 05211001502-02, rod for vaccum circuit breaker 6.6 kv vm1245211001564-v01 bhel-bhopalfor tripping spring assemblyadditional data:rod for vaccum circuit breaker 6.6 kv vm12 bhel-bhopal for tripping spring assembly;drawing no:45211001564-v01, rod spring charge/discharge for vaccumcircuit breaker 6.6 kv vm12 45211001559-001 bhel-bhopal for motor cut-off limit switch assemblyadditional data:rod spring charge/discharge for vaccumcircuit breaker 6.6 kv vm12 bhel-bhopal for motor cut-off limit switch assembly;drawing no:45211001559 001, roll pin for vaccum circuit breaker 6.6 kv vm12 e-9211016-005 bhel-bhopalfor interlock assembly (sl. 910075)additional data:for vaccum circuit breaker 6.6 kv vm12bhel-bhopal for interlock assembly (sl.910075);drawing no:e-9211016-005, roll pin for vaccum circuit breaker 6.6 kv vm12 e-9211016-007 bhel-bhopal for interlock assemblyadditional data:roll pin for vaccum circuit breaker 6.6 kvvm12 bhel-bhopal for interlock assembly;drawing no:e-9211016-007, bush for vaccum circuit breaker 6.6 kv vm1245211001505-001 bhel-bhopalfor mechanism shaft assemblyadditional data:bush for vaccum circuit breaker 6.6 kv vm12 bhel-bhopal for mechanism shaftassembly;drawing no:45211001505-001, nylon sleeve for vaccum circuit breaker 6.6 kv vm12 b-9411154-001 bhel-bhopal for mechanism (additional parts)additional data: for vaccum circuit breaker 6.6 kv vm12b-9411154-001 bhel-bhopal for mechanism(add

Nylon Sleeve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector