Latest ofc chassis Tenders | Government ofc chassis Tenders

CTN :38354664

25 Apr, 2025 872.43 Crore

Bengaluru - Karnataka

Tender For corrigendum : supply, erection, testing and commissioning of receiving substation with incoming cabling from grid substation including 25 kv-ac traction cum 33kv auxiliary main sub- stations, 25kv overhead equipment, auxiliary power supply and other works for bsrp

Central Government/Public Sector

CTN :39429488

25 Mar, 2025 NA

Delhi - Delhi

Tender For bid to ras supply of hydrothermic pool - container pool structure made in gi main frame , sitc of plain blue liner , sitc of water massage system , sitc of mini skimmer, vacuume point, vinly liner compartible , sitc of drain point, vinly liner compatible , sitc of counter current jet , sitc of underwater rgb light with controller , ladder in ss304, ss316 as moc, od-42, 4 step , sitc of railing bar in ss304, ss316 as moc in 22.96 rft , sitc of one side hand rail for steps in ss304, ss316 , cleaning accessories with test kit , chiorine , internal pipes, valves, fitting and cabling , plant room pipes, valves, fitting and cabling , 550 mm dia top mounted sand filter with multi port valve , 01 hp free flow pump , 3 hp spa pump , glass media , heat pump , quantum , salt chlorinator ic20 , power controller intellichlor , ozonator , automatic dosing system , aqua bike-manual, processing time-3 week , underwater tredmil, processing time-3 week , electrical panel to operate lighst and pool equipment

Central Government And Public Sector

CTN :39518383

14 Apr, 2025 14.27 Crore

Chengalpattu - Tamil Nadu

Tender For corrigendum : supply of electrical equipments and installation works of electrical and instrumentation system for oesc at maps site - supply of following pre-fabricated and galvanized cable tray supporting structure materials as per specification, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/ 2002, 2003 & 2004/dd., 22 first rod with m22x55 long threading on one end & m 22 hex nut, isa 65x65x6, 22 rod, isa 65x65x8, ismc 75 channels, couplers (36 odx6 thk.), weld attachment (made of 75x10 thk. plate,320 long), swivel washer seat (46 x16 thk.), swivel washer (40 x16 thk.), iso 1234, 3.5x32 spilit pin, shear bolt m10x70 with hex. head & nut & washer, washer for shear bolt, nut for shear bolt, iso 1234, 3.5x20 split pin, washer (48 , is 2016), 3 mm thick l clamp with m8x30 mm long bolt, 2 plain washer, 1 spring washer and nut, 600mm long, 30 mm wide & 2.5 mm hot dip galvanized strip with two nos of m8x30 mm long bolt, 4 plain washer, 2 spring washer and 2 nuts, installation of cable tray supporting structure including site works such as cutting, drilling, threading, welding, fixing the hardware, touch up painting using zinc rich paint for welded surfaces etc., as per the specification, cable installation note, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/2002, 2003 & 2004/dd, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 150 mm width, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 300 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 150 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 300 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 150 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 300 mm width, common cable tray and ventilation duct support for supporting 1 tier of straight tray or elbow of 150 mm width, cabling systemsupply of following sizes of 6.6kv/11kv rated, al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed, gi wire/ strip armoured power cables along with steel cable drums, 3cx185 sqmm armoured cable, supply of following sizes of 1100v rated, cu/ al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed power cables along with steel/ wooden cable drums, 3.5cx400 sqmm, al conductor, armoured cable (gi armour) with steel cable drum, 3cx2.5 sqmm, cu conductor, un-armoured cable with wooden cable drum, supply of following sizes of 1100v/ 650v rated, cu conductor, pvc (type-a) insulated, overall screened, frls pvc (st1) inner and outer sheathed, gi armoured control cables along with steel/ wooden cable drums, 4cx2.5 sqmm, 1100v rated with wooden cable drum, 2cx2.5 sqmm, 1100v rated with wooden cable drum, 4cx10 sqmm, 1100v rated with steel cable drum, 2cx10 sqmm, 1100v rated with steel cable drum, 10px1.5 sqmm, 650v rated with steel cable drum, supply of following medium duty gi pipes/ heavy duty erw rigid conduits/hume pipe for routing cables from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following medium duty gi pipes/ conduits/hume pipes for routing cables (from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge), including supply and installation of clamps/ fasteners/ supports, accessories like bends/ couplers along with cutting, threading etc., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following sizes and types of cable trays and accessories as detailed in drawings and specification including sup

CTN :39261023

24 Apr, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : design, support, supply, installation and commissioning, training, warranty and annual maintenance contract of medical cyclotron with turnkey (complete scope as per the attached document in specification) - [equipment -medical cyclotron system] medical cyclotron- bunker type, unshielded with 4 numbers niobium liquid target for 18f production (self shielded), 2 numbers niobium liquid target for 68ga production (unshielded or self shielded), 1 number solid target ( for production of 64cu,89zr, 68ga) (unshielded or self shielded) along with necessary operator and personnel safety interlock system, [equipment -medical cyclotron system] 18f based synthesis modulefully automated cassette-based synthesis module with suitable dual vertical hotcell or equvivalent to handle 20 ci of f18 radioactivity (each working chamber) for routine production of 18f based radiopharmaceuticals., [equipment -medical cyclotron system] synthesis research modulegeneral purpose 18f radiofluorination module with suitable dual vertical or equvivalent hot cell, [equipment -medical cyclotron system] solid target irradiation, processing and synthesis systemsolid target processing system with electroplating+recovery of enriched target+purification) automated module for synthesis of radiopharmaceuticals of zr89,64cu, with suitable hot cell (100 mm lead thickness) [separate prices to be provided for hotcell with camera and hotcell with pb glass window for the working chambers of the hotcells], [equipment -medical cyclotron system] fully automatic dispenser (18f)fully automatic dispenser for vial dispensing with suitable hot cell to handle 20 ci of f18 radioactivity, [equipment -medical cyclotron system] dispenser for solid target-based rpone dispenser for solid target-based radio-pharmaceuticals with suitable hot cell to handle minimum of 5 ci of activity., [equipment -medical cyclotron system] 68ga based synthesis module fully automated synthesis module for radio labelling of 68ga produced from cyclotron with suitable dual vertical hot cell or equvivalent [separate prices to be provided with camera and with pb glass window for the working chambers of the hotcells], [quality control system ] hplchplc with autosampler, [quality control system] gas chromatographygas chromatography with fid and autosampler, [quality control system]tlc scanner, [quality control system] ph reader, [quality control system] mca solid state based mca, [quality control system] dose calibratordose calibrator for qc, lead shielding, [quality control system] bet systemendotoxin test system for quality control, [quality control system]bod incubator, [quality control system] l-bench l-bench for target maintainance, [quality control system] l-bench (qc)l-bench for qc of pet radioharmaceutical, [quality control system]laminar flow benches, [radiation monitoring equipment] central radiation monitoring systemsystem includes software for online data acquisition and backup for six months., [radiation monitoring equipment] gamma area monitor gamma area monitor (0-100mr/h), [radiation monitoring equipment] remote probehigh range gamma monitor with remote probe, [radiation monitoring equipment] stack monitoring systemnai detector for on line stack monitoring systemlead castle for stack monitoring probeintegrated radiation monitoring computer system with complete cabling up to the top floor of building.stack monitoring channel local alarm unitssoftware system for stack monitoringmonitor channel connection kitspare parts kit for stack monitor, stacking monitor channels, area monitors, [radiation monitoring equipment]hand & foot monitor, [radiation monitoring equipment] personal pocket dosimeters (digital), [radiation monitoring equipment] portable gamma dose rateportable gamma dose rate meter + contamination probe, [radiation monitoring equipment] portable survey monitor for neutron, [radiation monitoring equipment] remote probe survey neutron monitor (high range), [radiation monitoring

CTN :39688026

01 May, 2025 NA

Kanchrapara - West Bengal

Tender For supply of complete control cubicle sb1 along with all equipment and cabling for 3-phase (wag9/wap7 ) as per spec no. clw/es/3/0194/i. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :39671177

26 Mar, 2025 NA

Kamrup - Assam

Tender For custom bid for services - inst shutdown jobs for tps dmp for 2 years at gr tender no 9010c25g44-1.skilled & unskilled jobs at tps & dm plant of guwahati refinery include all works that are to be carried out as per the instructions of the engineer-in-charge / site-in-charge during m&i shutdown. 2.electricians shall be responsible for field and control room wiring/cabling, termination, cable glanding, lugging, ferruling etc. as per the direction of engineer -in-charge. 3.fitters shall be responsible for tubing (ss tube, cu tube), cabling, cable tray laying, jb installation etc. 4.welders shall be responsible for fabrication jobs (impulse piping, support modification, cable route modification jobs, new installations of transmitters / valves etc. 5.helpers shall be required for rigging assistance to carry out all transportation, material handling & cleaning jobs and to assist electricians, fitters & welders to execute all instrument related jobs. 6.during the execution of the work, if the contractor is found lacking in skill/ experience/ mobilization, the contract will be forthwith discontinued. 7.iocl will not provide any extra cost for site supervisor. bidder to consider the same during price bid quotation. b. shutdown specific scope of work: 1. cable laying of different instrument cables multi-pair and single pair (signal / power / control / alarm / thermocouple / rtd / fo etc.) of different sizes and types (armoured/unarmoured) in existing cable trenches including routing through mct blocks. scope of splicing of fo cable is in vendor scope. 2.cable testing and transportation from stores to site, unpacking, straightening, dressing of cable & returning the empty drums with unused cable, if any to stores. 3.glanding & termination of signal/control/triad/t/c and power cables with double compression type ss cable glands. 4.cable termination at device end, junction box end and marshalling end shall be carried out under the supervision of m/s iocl. 5.loading, unloading and shifting of material from store / fire & safety etc. to site in all the sections of guwahati refinery. 6.dismantling and installation of misc. instruments, junction box, cables, cable glands, cable trays etc. under the supervision of m/s iocl. 7.laying and fabrication of ss / cu tubes as directed by site engineer. 8.dismantling and installation of control valves / on-off valves / their accessories / positioner mounting / air filter regulator cleaning / replacement etc. shall be carried out under the supervision of m/s iocl. 9. bidder is solely responsible for execution of each work executed by him / by his worker. for any nonstandard execution of the performed job , eic/sic may asked to repeat the job for correction purpose without paying any extra amount. 10.heavy equipment (i.e. tractor trailer & hydra) required for dismantling, transportation & installation of valves/equipments shall be in scope of contractor.

CTN :39599633

01 Apr, 2025 NA

Barwani - Madhya Pradesh

Tender For supply installation and commissioning of cctv equipment on item rate turnkey basis at swami amurtanand govt college anjad - supply, installation, commissioning and training of cctv system on turnkey basis for at sagc, anjad, madhya pradesh, nvr 32 ch project series up to 8 mp -2 sata as per specifications, hard disk 4 tb as per specifications, specification cctv camera colour view 5 mp as per specifications, cat6 305 m/bundle as per specifications, poe + 16 port data switch 10/100/1000 unmanaged as per specifications, poe + 8 port data switch 10/100/1000 unmanaged as per specifications, spike metel as per specifications, u rack 3 u with cable tray and fittings as per specifications, u rack 6 u with cable tray and fittings as per specifications, 2 x 2 dual band wireless access point as per specifications, installation, testing, commissioing and training of all cctv products as per specifications, speaker ceiling mount / wall mount as per specifications, control unit pa system as per specifications, 3 core cable as per specifications, power cable as per specifications, installation testing, commissioing of cbaling, accessories, junction boxes including at control boxes as per specifications, invertor 10 kva online as per specifications, tv as per specifications, wireless access point with cabling , data switch, racks and installation as per specifications

Central Government/Public Sector

CTN :39677920

31 Mar, 2025 NA

Delhi - Delhi

Tender For purchase of audio equipment ( studio microphone, studio headphone, studio monitor, microphone stands, broadcast and production studio console, phone in consoles telephone hybridge, audio codecs, sound cards, audio cable, various audio connector xlr patch cords, audio filters, audio amplifier, patch panels, patch chords and other audio related equipment ) it equipment ( computer desktop and workstation, computer server, nas storage, spare parts for computer parts ( like power supply, computer cards, ssd hard disk, keyboards, mouse, ram modules etc ) ethernet swithes, ethernet connector, cat-6 cables, cat-6 patchcords, fibre cables, fibre connector, fibre patch cords, telephone multicore cables, hdmi cable, high performance usb cables, pen drives, computer kiosks, digital display box etc ), maintenance equipment and tools ( soldering equipment, ups batteries, battereis, infrared thermometer, dry and wet hygrometer, screw driver sets, pliers / cutters, punching tools, spanner sets, wrenches, crimping trolls, line tester, twister, ac electrical connector, power cables, consumable items ( colins glas cleaners, dusters, cleaning powders, soap, iso propyle alcohol, pidilite adhesive, room freshners, transparent tapes, pvc tapes ) extension boards, air maonogrammed stickers, multimeter repeat oils, miscellaneous equipment ( tv set, set top box, revolving chairs, visitor chairs, transport services, assembly and disassembly of portable booths at, rf requipment 5g c bandpass fileter, c/l band splitter, c/l band combiner, c band lnbc, ku band lnbc and dish etc, repair of audio console, radyne satelite recievers, repair of studio doors / acoustic repair of it equipment servers, desktop, switches copper and fiber network cabling work

CTN :39644886

07 Apr, 2025 NA

Bathinda - Punjab

Tender For breakdown, periodical and preventive maintenance of building lighting, street lighting, security lighting and allied equipment like cabling, junction boxes, control panels etc

CTN :39606621

28 Mar, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For providing of repair and overhauling service - 4268 degutting and installation of new equipment and associated cabling onboard in lcu 56; cabling; yes; buyer premises

Ofc Chassis Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government / Public Sector

Central Government/Public Sector