Latest ohsas 18001 Tenders | Government ohsas 18001 Tenders

Central Government/Public Sector

CTN :36330185

01 Jul, 2024 NA

Ranipet - Tamil Nadu

Tender For set of fully threaded hex head s.s bolt with spring , flat washer and nutsize:(1) fully threaded ss 304 hex head bolt m10x40( as per din933, a2-70),qty-900 nos/set.(2).fully threaded ss 304 hex head bolt m10x100( as per din 933, a2-70) , qty: 300no./set .(3). ss 304 hex nut 10mm(as per din 934, a2-70)-600 nos./set .(4).ss 304 spring washer 10mm(asper din 127/ is 3063, a2-70)- 600 nos/set .(5). ss 304 plain washer 10mm(as per din 125/ iso 7089, a2-70)-1200nos/set . make: lps/ unbrako/bbbb/tvs/apl.note : material should be supplied by authorized dealer or firm should supply the material with oem test certificate. [ warranty period: 18 months after the date of delivery ]

Central Government/Public Sector

CTN :36119898

11 Jun, 2024 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : supply of flash back arrestor(dry type) for torch end of acetylene/lpg lines to prevent flash backs in oxy fu el system conforming to en 730/iso 5175-1/is 11006 standards with flame arrestor(fa) and non return valve(nrv) w orking pressure: 1.5 bar for acetylene/5.0 bar for lpg. end connections g 3/8" lh to en 560/iso 3253 standards. mak e: messer(cg-91 fuel) or esab(fr-18) or gce(fr-20t fuel) only. note:1) offers of oems or their authorised dealers enclosing valid authorised dealership certificate only will be considered. 2) the suppliers shall send test cer tificate from govt. authorised test house. in case of international brand, the test certificate from reputed in stitute like bam, germany is mandatory. 3) the suppliers should have equipments for testing of flash back arre stors and calibration. the purchaser has the right to inspect these installations. as per specn. en 730/iso 5175-1/is 11006 [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :36305641

24 Jun, 2024 NA

Yelahanka - Karnataka

Tender For supply of short link chain for lifting purposes grade-t(type t),fine tolerance(calib rated)hoist chain to is/iso:3077-2001(superseded is 6216-1982)and is/iso 1834:1999.- genera l condition:nominal size:-14mm,pitch 42mm and working load limit 6 ton,supplier shou ld furnish inspection test certificate with respect to material,dimensions and load testing with identification marks,for grade,inspection,etc.

Central Government/Public Sector

CTN :36310885

13 Jun, 2024 NA

Chennai - Tamil Nadu

Tender For supply of three seater two piece pnm gas cutting nozzle to size 1/16 inch for bcg cutting work as per is 7 653:1975 or en iso 5172. make :-swps/ador/messer/esab/hmp/gce (authorized dealership certificate t o be attached during quote) [ warranty period: 30 months after the date of delivery ]

State Government

CTN :36286265

10 Jun, 2024 19.82 Lacs

Multi City - Karnataka

Tender For consultancy for work of renewal of nabl accrediation certificate as per iso/iec 17205 2017 to bwssb water testing laboratory situated at 4th block, jayanagar

Central Government/Public Sector

CTN :36295665

25 Jun, 2024 NA

Rajkot - Gujarat

Tender For supply of 1. dc to dc convertor for cctv system fitted in lhb ac & nac coaches as per specification no. icf/md/spec-269, issue status:02, rev.:00 or latest 6.nos 2. p networking cable for cctv system fitted in lhb ac & nac coaches as per specification no. icf/md/spec-269, issue status:02, rev.:00 or latest 100.mtr 3. m12 connector male for cctv system fitted in lhb ac & nac coaches as per specification no. icf/md/spec-269, issue status:02, rev.:00 or latest 12.nos 4. m12 connector female for cctv system fitted in lhb ac & nac coaches as per specification no. icf/md/spec-269, issue status:02, rev.:00 or latest 12.nos 5. ssd of storage capacity 2 tb for cctv system fitted in lhb ac & nac coaches as per specification no. icf/md/spec-269, issue status:02, rev.:00 or latest 2.nos 6. nvr (network video recorder) for cctv system fitted in lhb ac & nac coaches as per specification no. icf/md/spec-269, issue status:02, rev.:00 or latest 2.nos 7. ip camera for cctv system fitted in lhb ac & nac coaches as per specification no. icf/md/spec-269, issue status:02, rev.:00 or lates 2.nos 8. safety shoes of various sizes as per is 15298(part2):2011/iso 20345:2004 with following features.1) steel toe cap confirming to is 5852 with minimum impact energy of 200 joules.2) oil ,chemical & heat resistance ,antistatic, anti sleep & electric hazard smooth upper mash fabric for cooling effect. 3) double density directly injected . some of reputed brand are bata, liberty, red chief, woodland, lee cooper & action only. 15.pairs 9. indian national flag size 30 feet x 20 feet knitted polyester fabric, 180 gsm nylon webbing all four side protected from wind as per flag core of india 8.nos 10. bosch corded small angle grinders, power 220-240v ac, 50/60 hz brand: bosch (detailed description/specification as per product # 1 of gem contract no. gemc-511687783456932 dt.08/02/2024) model:- bosch gws 600.note: item shall be supplied along with warranty certificate. 2.nos 11. bosch cordless small angle grinders, power 220-240v ac, 50/60 hz to model no. gws 180li cordless angle grinder 100mm to gem product id:- 5116877-30356786709. make: bosch, stanley, makita only. note: item shall be supplied along with warranty certificate. 1.nos 12. fridge 100 litre of whirlpool, haier, godrej, lg or similar 1.set sr divisional mechanical 13. desktop pc core-i3 13th gen 4 gb sram 512 ssd hard disk with window 10 lic with wired keyboard and mosue,21 led monitor with 3 year on site warranty make:-hp,dell,lenovo

Central Government/Public Sector

CTN :36281943

21 Jun, 2024 NA

Chennai - Tamil Nadu

Tender For single stage lpg regulator conforming to specification is: 6901-2009 or latest (iso 2503-1998 or latest). detailed specification: 1) inlet pressure range: 0- 25 bar. 2) outlet pressure 0-2.5 bar (minimum range). 3 ) inlet connection : 21.8x1.814 mm(0.860 bswx 14 tpi lh) (female) . 4) outlet connection : g 3/8 inches lh. 5 ) pressure gauges: 2 nos. make- gce / messer/ esab /victor/hmp ador/swc(star welding com pany) only. note : 1) one sample to be provided for suitability before bulk supply. 2) copy of the certificate for conformance to the specification from the oem should be provided along with supply. [ warranty period: 12 mo nths after the date of delivery ]

State Government

CTN :36286438

22 Jun, 2024 NA

Varanasi - Uttar Pradesh

Tender For supply of cranial fixation system assorted sets two hole with gap straight plate 20mm sterile,ce certificate from notified body. oem must have iso ,gmp & ce certified and suppiler should be oem authorized certified & iso certified from notified body. instruments should be provided for on loner basic by suppiler, cranial fixation system assorted sets four hole with gap straight plate 20mm sterile,ce certificate from notified body. oem must have iso ,gmp & ce certified and suppiler should be oem authorized certified & iso certified from notified body.instruments should be provided for on loner basic by suppiler, synthetic fabric patch is designed to repair defects in soft tissues & re-enforcement of soft tissues such as durameter , peritoneal pleura etc. the patch is made of poly propylene non woven patch (same as prolene mesh).its a non absorbable size 8x10 cm - oem must have iso ,gmp & ce certified and suppiler should be oem authorized certified & iso certified from notified body, synthetic fabric patch is designed to repair defects in soft tissues & re-enforcement of soft tissues such as durameter , peritoneal pleura etc. the patch is made of poly propylene non woven patch (same as prolene mesh).its a non absorbable size 10 x 12 cm -oem must have iso ,gmp & ce certified and suppiler should be oem authorized certified & iso certified from notified body, cranial fixation system pre curve mesh size 120x 180mm -oem must have iso ,gmp & ce certified and suppiler should be oem authorized certified & iso certified from notified body.instruments should be provided for on loner basic by suppiler, cranial fixation system pre curve mesh size 120x 120mm -oem must have iso ,gmp & ce certified and suppiler should be oem authorized certified & iso certified from notified body.instruments should be provided for on loner basic by suppiler, self tapping screw sterile with screw holder size 1.6 x 4mm-oem must have iso ,gmp & ce certified and suppiler should be oem authorized certified & iso certified from notified body.instruments should be provided for on loner basic by suppiler, self tapping screw sterile with screw holder size 1.6 x 5mm- oem must have iso ,gmp & ce certified and suppiler should be oem authorized certified & iso certified from notified body.instruments should be provided for on loner basic by suppiler, evd catheter shunt for patented advantage impregnation process- medium id applied to core the substrate, reduced the potential for bacterial colonization,choice of neurosurgeons for soft,flexible, pliable slicone catheters.each of the bactiseal evd catheters is a 35 cm silicone catheter. the catheter is marked with numbers or rings at each centimeter between 3 cm and 15 cm from the proximal tip. these markings serve as a scale to determine depth of insertion. the catheter characteristics vary- oem must have iso ,usfda & ce certified and suppiler should be oem authorized certified & iso certified from notified body, shunt infection rates are in 5% to 15% rage, infection is second most common cause of vps malfuction, a unique, effective barrier to gram positive bacterial colonization on all catheter surfaces.oem must have iso ,usfda & ce certified and suppiler should be oem authorized certified & iso certified from notified body, dura substitute for type-1 collagen, suture less adhesion barrier matrix , size 1x1 inch,oem must have iso ,usfda & ce certified and suppiler should be oem authorized certified & iso certified from notified body, dura substitute for type-1 collagen, suture less adhesion barrier matrix, size 2x2 inch,oem must have iso ,usfda & ce certified and suppiler should be oem authorized certified & iso certified from notified body, dura substitute for type-1 collagen, suture less adhesion barrier matrix, size 1x3 inch,oem must have iso ,usfda & ce certified and suppiler should be oem authorized certified &

Central Government/Public Sector

CTN :36231567

06 Jun, 2024 NA

Chennai - Tamil Nadu

Tender For supply of adjustable interchangeable torque wrench with spigot end classified to din en iso 6789:2003 ty pe ii class a, with a factory calibration certificate for controlled bi-directional tightening having dual scale nm and lbf-ft with micrometer scale for main nm scale for setting interim values. torque range : 250-850 nm, length 135 0 mm max and max weight of 4.5 kgs with open end fittings and ring end fittings of sizes 24 mm, 30 mm, 32 mm. make -gedore / armstrong /snap-on/bahco/blue point [ warranty period: 30 months after the da te of delivery ]

Central Government/Public Sector

CTN :36192726

06 Jun, 2024 NA

Ajmer - Rajasthan

Tender For safety chain to be as per is 3076:1984 grade t (8) or latest. the specifications as issued by rds o( attached in nit) are to be adhered to in their entirety except that the nominal size (thickness) of the short link chain is to be 13 mm (+/- 0.5mm) to 14 mm (+/- 0.5 mm) and long links at ends with ring/suitable locking arrange ment for padlocking is to be of the length of 4.5 meters. further, the length of the short link chains is to be kept at 50 mm and width at 35 mm. these are electrically welded round steel short link chains, fully heat treated and test ed and comply with the general conditions of acceptance of iso 1834 or latest. the sizes range from 5 to 45 mm . (based on user requirement). the steel used shall be produced by the open hearth or electric process, or by an oxygen blow process. it shall be steel alloy. marking shall be done as per is 3076:1984 grade t(8) or latest. sup plier shall supply a certificate of test and examination carried out by the government owned lab or nabl approve d labs with every supply of chain. there should be name of the chain maker, grade of material, size of chain, iden tification marking, proof force applied to the whole chain. no. of test sample taken, breaking force of each sample , total ultimate elongation at fracture, during manufacture the heat treated chain shall be subjected to force of 60 % of the minimum breaking force. [ warranty period: 30 months after the date of delivery ]

Ohsas 18001 Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors