Latest oil tank scrap Tenders | Government oil tank scrap Tenders

CTN :45042586

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned scrap loaded boxnm1 & boxnr wagons no as following: [1] cr 10019704257 boxnm1 (ms scrap loaded) [2] ser 10079560640 boxnm1 (ms scrap loaded) [3] scr 10099460203 boxnm1 (ms scrap loaded) [4] ser 10079661514 boxnm1 (ms scrap loaded) [5] scr 25099560945 boxnr (ms scrap loaded) [6] scr 10099633188 boxnr (ms scrap loaded) condition:- [1] as is where is basis.[2] cutting is allowed for loading facilities only.[3] to be sold without all available excluded fittingsas follows:- (i) for boxnm1 & boxnr : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 03 & 05 are fitted with 22w(m) casnub bogie which are to be sold with wagon.[4] all wagons will be sold along with the scrap material present in wagons.[5] although sale unit of condemned wagon is in nos but delivery will be given on weighment basis(weight slip) at ssy weighbridge with saleable weight of 175 mt only.

CTN :45042587

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bfkhn wagons no as following: [1] cncr 98259100282 bfkhn. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (11.640 mt) is the lot quantity (11.640 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bfkhn : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01 is fitted with 22w casnub bogie which is to be sold with wagon.

CTN :45042589

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1 wagons no as following: [1] special repair 30069061629 bcnm1 [2] scr 30099060630 bcnm1 [3] nr 30038961448 bcnm1 [4] ser 30078965246 bcnm1 [5] nfr 30058960216 bcnm1 [6] er 30029125699 bcnm1 [7] nfr 30058964481 bcnm1 [8] wr 30088932580 bcnm1 [9] cr 30019161645 bcnm1. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (139.600 mt) is the lot quantity (139.600 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01, 04 & 09 are fitted with 22w(m) casnub bogie which are to be sold with wagon.

CTN :45042590

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, bobrnm1, boxnr & boxnrm2 wagons no as following: [1] scr 10099662256 boxnm1 [2] er 72029660312 bobrnm1 [3] ser 10079768312 boxnm1 [4] scr 10099734601 boxnm1 [5] scr 10099663109 boxnr [6] ser 10079664607 boxnm1 [7] cr 25019660267 boxnr [8] er 72029581600 bobrnm1 [9] special repair 10069660824 boxnm1 [10] scr 10099662881 boxnm1 [11] ser 10079664171 boxnm1 [12] scr 25099660645 boxnrm2 [13] ser 25079764509 boxnr condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (131.980 mt mt) is the lot quantity (131.980 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, boxnr & boxnrm2 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

Central Government/Public Sector

CTN :45031539

14 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - released mixed ferrous scrap: cutting pieces of engine block, bull gear, scrapped bogie parts ( bss pin, yoke pin, anchor link, silentent block, bss pin, yoke pin, anchor link, silentent block, bss hanger, circlip, anchor link bracket, lower spring seat, bearing, break beam etc., ) megi side bearer, spring, coupler spring, condemned alternator, gear, break disc, after cooler, housing pump, casing, armeture, push rod, cylinder head, nut bolt, pipes, cbc and screw coupler, coupler head assembly, carrer plates front and rear, supporting device, buffer plunger, protective tube, bogie bracket, break beam, hook and clamp, knuckle, m.s.plate and other miscellaneous mix ferrous scrap. excluding steel and aluminium. note 1. re-punching with other lots will not be allowed. 2. lading will be start at 09.00 a.m. loading will not be allowed after 15.00 hrs.

Central Government/Public Sector

CTN :45019353

08 May, 2026 NA

Kota - Rajasthan

Tender For auction sale of depot ferrous scrap - 98050126 scrap ferrous material consisting of various type of nut, bolt, rivets, peices of angle, channel, m.s. bracket, draft gear spring washer,m.s. liners,piston, door hinge, door hinge foot, small cut peices of tie bar, beater, clamp, pully side bearer housing, brake wear plate,side bearer housing top and bottom, knuckle pin, knuckle thrower, dog spike, g.i. ohe fitting, bk hanger lever, fish bolt, parts of ctrb bearing, liner, small p.way fittings, bk shoe key, s/pin, pu pad, axle box cover, and inner outer rings, m.s. pins, s/plate, peices of s.s and m.s. pipe, peices of huck bolt fresh cutting, push rod, cbc uncoupling rod, cbc lock and cbc components, safety loop, bk shoe head, released valve, cut peices of m s sheet, plates, buckles, ohe fitting, peices of ms rounds, equalizing lever, bridle bar, shackle stone, shackle, stricker casting wear plate, yoke pin, side bearer liner plate, hand brake wheel, suspension socker, g.i. nut bolt, tension device, main pull rod, cbc uncoupling rod, yoke pin, c.c. pad plate, m.s. round, bk shoe head, bk beam plate, reservoir tank patti, door catch, door check spring, annual repair supporting bracket, signal ground connection parts and other small wagon components and other ferrous items if any.

Central Government/Public Sector

CTN :45019358

08 May, 2026 NA

Kota - Rajasthan

Tender For auction sale of depot ferrous scrap - 98090800 scrap ferrous material consisting of m s sheets, plates, maximum quantity of lirries, cut peices of angles, channels, pipes and foot step, m.s. and s.s. ladders and g.i. pipe and s.s. pipe, m s pipe, door check spring, chairs, small pieces of irsm 44,sab regulator, parts of sab regulator and parts of bmbs brake cylinder, door hinge, door hinge foot, hand brake wheel, tmt bar, push rod,m.s. rounds, main pull rod, nut, bolt, rivets, angle frame and other wagon components and other ferrous items if any. with or without attachment. note: - (1) irsm-44 sheet plate not to be delivered. (2) cutting allowed before delivery if required.

Central Government/Public Sector

CTN :45000773

04 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - 98230025: cond & u/s aluminium scrap consisting of frames,aluminium gutter, window frames,beadings,end cover,fip cover,fan parts,piston, ladders, channels, doors frames, clamp, aluminium stand,chair frame, aluminium plate/flat/ angle/ sheet /cutting sheet/ channel/pipe,tappet cover, pump cover, sump cover, steady arm with/without gi,utensils/vessels,sign/caution board,loco parts, horn,pantograph parts, sleeve,push rod,fip support cover,cylinder head cover,floating bush,gear case top,glow rod gauge short and long,compressor piston,compressor fan,valve body,fan blade,slash sliding frame,radiator fan leaf,love joy coupling,various sizes of pulley,connecting rod ,various sizes of piston connector, piston enfield greaves,piston honda, various sizes of piston chain saw,crank case/barrel,chain saw/brush cutter cylinder,head chamber,aluminium pipe for brush cutter,honda brush cutter cylinder,broken pieces of various aluminium parts,gear case and plate,gear case brush cutter with broken parts,broken parts bifurcated impellers, extrusions, sign boar with/without wire attachments,propeller, pully,extrusions, aluminium pieces,convertor, valve, air dryer parts, wiper parts, cam house, pressure gauge, propeller,aluminium trolly parts, compressor case, light fittings and parts, water tight fittings, tube light fittings, gauge cum levels, antenna, slab and such other similar aluminium items with or without ferrous, nonferrous and other attachments as is where is condition. location:in front of rack no.6, adjacent to wall -3,4 and tub no.7 of ward 04/ssd/ptj

Central Government/Public Sector

CTN :44908309

23 Apr, 2026 NA

Multi City - Rajasthan

Tender For auction sale of depot ferrous scrap - 98050035 scrap us low melting scrap comprising of nut-bolt, rivets, keys, small pieces of angles/ channel /plate /sheet /rods, metal liner, springs pcs, side bearer pad, washer, pull-push rod, pcs. of striker casting, bearing plate, pandrol clips, keys, liners, fishplate, brackets, a/b housing, splinders, blocks/suspension, brackets, door check spg., br. head, tension rods, draw bar, slide chair, tie bars, chain links, cotter pin, dog spike, loose jaw, and similar items of melting scrap cond. 1- loading by purchaser (2) delivery in only rto registered vehicles. note: - all purchasers are kindly requested to communicate through ireps only for matters related to power of attorney, delivery orders (do), delivery dates, and other relevant correspondence. offline requests shall not be entertained. requests (related to final delivery) shall be placed atleast seven days in advance so that there is sufficient time with competent authority for scheduling of scrap delivery.

CTN :44882125

22 Apr, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnr, bobrmn1, boxnm1 & bcnm1 wagons no as following: [1] ser 25079617706 boxnr [2] er 72029660404 bobrnm1 [3] ser 10079666960 boxnm1 [4] nr 30038961066 bcnm1 [5] cr 30019060320 bcnm1 [6] er 30029020147 bcnm1 [7] cr 30019160457 bcnm1 [8] ser 30079160251 bcnm1 [9] er 30029125682 bcnm1 [10] ser 10079646511 boxnm1 [11] ser 10079662764 boxnm1. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (132.180 mt) is the lot quantity (132.180 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowedinside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for boxnr, boxnm1 & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

Oil Tank Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector