Latest operation trolley Tenders | Government operation trolley Tenders

State Government

CTN :42915120

03 Dec, 2025 90.65 Lacs

Kota - Rajasthan

Tender For - rmc to mawasa - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator machine complete wi

State Government

CTN :42966383

04 Dec, 2025 30.00 Lacs

Kota - Rajasthan

Tender For name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator mach

Central Government/Public Sector

CTN :42998132

22 Dec, 2025 6.20 Lacs

Ranga Reddy-T - Telangana

Tender For providing of custom bid for services - supply of shaker body bellows for 3 point 5 ton vibration stand (sdyn make) quantity: 4 numbers,custom bid for services - supply of armature suspension system along with all the accessories as per sow quantity: 8 numbers,custom bid for services - supply of hydraulic pipe for interconnection hyd tank and slip table with necessary end fittings quantity: 2 metres,custom bid for services - supply of armature centering assembly along with all the accessories as per sow quantity: 1 set,custom bid for services - service charges per man-day for maintenance of 3 point 5 ton sdyn vibration stand quantity: 3 man-days

CTN :42704140

02 Dec, 2025 1.20 Lacs

Multi City - Telangana

Tender For procurement of hydraulic lifting table (gear box jacks) on specific make basis for area workshop, rg-i area

CTN :42971187

12 Dec, 2025 20.00 Lacs

Chandigarh - Chandigarh

Tender For supply of crockery/cutlety and glass items - full plate, bone china with logo, quarter plate bone china with logo, half plate bone china with logo, cup bone china with logo, saucer bone china with logo, soup bowl bone china with logo, soup spoon, bone china, hi ball glass with logo, water tumbler with logo, tea spoon with logo, table spoon with logo, juice glass with logo, venus chafing dish round (hydraulic 6 ltr.), heating element with installation, venus ladle

CTN :42998168

23 Dec, 2025 4.31 Crore

Delhi - Delhi

Tender For supply of table , table officer , table dining big , table computer , table wooden for conference , table center , chair , chair revolving , chair officer , chair training room , stool revolving , sofa set 3 seater , sofa set 1 seater , rack 6 shelf , rack shoe , rack adjustable , almirah , locker wall mounted , ladder aluminium foldable , ladder aluminium medium , hydraulic hard pallet heavy , hydraulic hard pallet medium , hydraulic pallet with big basket , modular counter , attendant bed , attendant stool , goods trolley , plastic curtain with tracking system , step stool double

CTN :42312082

02 Dec, 2025 NA

Udhampur - Jammu And Kashmir

Tender For bid to ras bid to ras corrigendum : supply of purchase of machinery and equipments c c - seam welding machine , rockwell brinell hardness tester , izod charpy impact testing machine , torsion testing machine , spring testing machine , surface grinder , drilling cum milling machine manual with all accessories , vernier caliper , disc flange micrometer , universal bevel protractor , sine plate , milling machine with all accessories , slotter machine , pedestral grinder , refigeration gas charging kit , vapour compression refrigeration cycle test rig , air conditioning test rig , complete refigeration and ac tool kit , sample of all valves used in refrigeration and air conditioning , model of lancashire boiler , model of babcock and wilcox boiler , model of locomotive boiler , model of cochran boiler , model of vertical water tube boiler , mounting and accessories of steam boilers , pyrometer , infrared thermometer , abrasive cut off machine , polishing machines , muffle furnace , quenching tank , two stroke petrol engine , single cylinder diesel engine , instruction panel for battery ignition system , cooling system of ic engine , lubrication system of ic engine , morse test , surface roughness tester , profile projector , auto collimator , centrifugal pump single stage test rig , air compressor test rig , models , hydraulic bench with apparatus accessories , closed circuit machine pipe fricton apparatus , double wheel pedestal bench grinder with built in dust collector , 3 in 1 shearing brake and rolling machine , hand operated sheet bending machine , table working table for fitting shop , 3d printer , water cooler , stablizer for water cooler , water purifier , frost free refrigerator , convection microwave , pillar room heater , semi automatic washing machine , induction pedestal fan farata , dry and wet vaccum cleaner , high pressure induction washer , 4 stroke bush cutter , desert air cooler , gi pipes , straight grinder , flexible shaft grinder , inflation air compressor , dry lead acid battery charger , wood planer , fixed base bench vice

CTN :42974930

08 Dec, 2025 NA

Parganas - West Bengal

Tender For supply of copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , bathroom water shower (v2) (q3) , flushing cistern (q3) , toilet seat covers (v2) (q4) , table top glass 1200mm x 600mm x 10mm thick plate tined glass with colour , curtain rod cp 20 mm dia 12ft long with socket , hydraulic door closer , mccb db 4 way double door spn , mccb db double door tpn vertical type 4 way , mccb db 8 way double door spn , mirror for table dressing ladies 1220x365x5 point 5mm , gi tubing 20 mm dia 6mt long , top for table 4 ft x 3 ft , mirror for table dressing gents 760mmx389mmx4 mm thick longx4mm

Central Government/Public Sector

CTN :42757777

06 Dec, 2025 NA

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of hemodialysis machine , 12 channel ecg machine , opthalmic hydraulic table and chair , multipara monitor , air conditioner 1. 5 ton , refrigerator 236-246 l

Central Government/Public Sector

CTN :42811114

02 Dec, 2025 NA

Bhilai - Chhattisgarh

Tender For corrigendum : tender for supply of hydraulic cylinders and seal kits d d - hyd cyl mbttgpcp2375 rev a eaton fpl , seal kit pn s02375 eaton fpl , seal kit pn so2366 eaton , hyd cylinder mbttencp2372 rev a eaton , seal kit pn s02372 eaton fpl , hyd cylinder mbttencp2373 rev a eaton , seal kit pn s02373 eaton fpl , swing table cyl mbrshscp2365 rev a eaton , seal kit pn so2365 eaton

Operation Trolley Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector