Latest or switch Tenders | Government or switch Tenders

Central Government/Public Sector

CTN :39822931

15 Apr, 2025 NA

Bengaluru - Karnataka

Tender For corrigendum : supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial k

Central Government / Public Sector

CTN :40007453

22 Apr, 2025 NA

Chirang - Assam

Tender For supply of auto-switch cutting tool for dcu-2 coke cutting

Central Government / Public Sector

CTN :40004319

26 Apr, 2025 NA

Digboi - Assam

Tender For supply of rockwell automation make ecs system spares - control logix control net module , 1794-acnr15 i o comm.module rockwell , 85-256v ac power supply,cat no.1756-pa72 , o p mod,16 point 24v dc,p n,1756 ob16d , cl 1756-ob16i a dcout-isol q01 module , 1794-ie8 analog i p mod 8 ch rockwell , 1794-ob16 o p module 16 ch.rockwell , flex 32 chann digital input p n1794-ib32 , 7 slot contrologix chassis 1756-a7 , controllogix 4 mb controller,1756-l72 , redundancy enhcd. module p n,1756-rm2 , 4 slot chassis, catalog no. 1756 - a4 , 1756-a10k control logix 10 slots chassis , ab pwr.sup-1756-psca2 a , vac redundant power supply,1756-pa75r , controllogix 5570 1756-l71 , redundancy module cable,1756-rmc1 , ethernet dual port module p n,1756-en2tr , ethernet bridge module,1756-en2t , 12 channel ai module part no 1794-ie12 , 36 pin screw clamp block,p n,1756-tbch , ai module - rtd 1794-ir8 , 1794-ob32p o p module 32 ch rockwell , 1794-ib16 ip module 16 ch.rockwell , 1786-xt end terminator rockwell , analog input modul 4-20ma,p n,1756-if16k , controlnet t-tap straight,cat no1786-tps , stratix 5700 switch p n,1783-bms20cl , 13 slot controllogix chassis , 17 slot controllogix chassis , flex terminal base p n 1794-tb32 , cosel s,ad480-24,smps,allen bradley , power monitor 3000

Central Government / Public Sector

CTN :40004695

22 Apr, 2025 80.37 Lacs

Kandla - Gujarat

Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0

Central Government/Public Sector

CTN :40000444

03 May, 2025 1.00 Lacs

Kudligi - Karnataka

Tender For electrical and plumbing items-, led tube light set - 05 wt to 20 wt, , led street light set - 30 wt to 50 wt, , led bulb 9 wt to 12 wt 240 v, , led flood light 35 to 200 wts, , sp switch modular- 6 ams 240 v, , insulation tape 10 mtrs, , 3 pin top - 6a, 240v, , step regulator modular -5 steps- consid and dimmer type, , ceiling fan condenser (oil condenser) 2.5 mfd, , mcb-16 ams sp, , 1 sq mm multi stand copper wire, , 1.5 multi stand copper wire, , 2.5 sq mm multi stand copper wire -per coil, , 4 sq mm multi stand copper wire - per coil, , 10 sq mm aluminium wire, , 2 core - per coil, , 10 sq mm aluminium wire 4 core - per coil, , single pole mcb box, , porclain fuse 32 ams, , screw per box, , pvc c clamp, , metal c clamp, , fan regulator, , modular switch 6a, 240 v, , holder-angle/batten/ p holder, , mcb 10 amps, single pole, , mcb 20 amps, single pole, , mcb 40 amps, 240v, double pole, , fuse-cut-outs, 32 amps 240v, , mccb 125 amps 4, 3 phase, 415v, , digital electric meter, single phase 240v, 50 hz, 0-30 amps, heavy duty, isi mark, , 3-pin top 16 amps 240v, , capacitors 20-40 mfd, , modulor switch board 4 to 16 way, , modulor dummy switch, , under ground armoured cable 15mm to 30 mm, , , pvc pipe, , cpvc pipe, , brass full torn taps, , pvc full torn taps, , , pvc elbow, , cpvc elbo, , pvc callar, , cpvc callar, , pvc gum, , cpvc gum, , pvc fta, , cpvc fta, , pvc mta, , cpvc mta, , cpvc brass elbo, , cpvc brass tee, , cpvc tee., , pvc trap cover, , clamps, , brass valve, , brass ball valve, , there are valves, , , , , , , , , ,

State Government

CTN :40013661

05 May, 2025 NA

Rupnagar - Punjab

Tender For supply of layer 2 access switch (v2),layer 2 access switch (v2)

Central Government/Public Sector

CTN :40010639

25 Apr, 2025 NA

Multi City - Multi State

Tender For supply of pressure switch swc.

State Government

CTN :40004773

05 May, 2025 NA

Chennai - Tamil Nadu

Tender For supply of auxiliary convertor busbars - bus bar barre connexion isolee xplus 4qc , bus bar barre connexion isolee xminus 4qc , bus bar joint , bus bar joint de traversee , bus bar barre connexion isolee xminus inv , bus bar barre connexion isolee xplus inv , bus bar barre de connexion , bus bar barre de connexion equipee neutre , bus bar barre de connexion equipee minus , bus bar barre de connexion equipee plus , bus bar barre de connexion alt 1 a0 equipee , bus bar barre de connexion alt 2 b0 equipee , bus bar barre de connexion alt 3 c0 equipee , bus bar connexion 8 equipee , bus bar connexion 7 equipee , bus bar connexion 1 equipee , bus bar connexion 2 equipee , bus bar barre , bus bar barre connection equipee , bus bar barre equipee , switch 5 positions wash off temp 1 2 bid number/ & ( * ) : gem/2025/b/6102776 dated/ + : 12-04-2025 bid document/ 3 3 1 / 27

corporations/Associations/Others

CTN :40014319

19 Apr, 2025 NA

Tuticorin - Tamil Nadu

Tender For supply, erection, testing and commissioning of new gaseous fire protection system inergen ig 541 for unit control room, 6.6 kv switch gear room, bmcc, cable gallery, zero mtr cable gallery, 9.5mtr cable gallery and battery room at unit 3

corporations/Associations/Others

CTN :40014008

24 Apr, 2025 10.00 Lacs

Coimbatore - Tamil Nadu

Tender For procurement of vertically operated 11 kv gang operated air breaker switch with composite polymer insulators

Or Switch Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors