Latest ortho implant Tenders | Government ortho implant Tenders

CTN :42989508

09 Dec, 2025 1.00 Crore

Churu - Rajasthan

Tender For tender for orthopedic implant for d.b. hospital churu

CTN :42966398

15 Dec, 2025 15.00 Lacs

Sojat - Rajasthan

Tender For orthopedic implants in sojat hospital

CTN :42756584

08 Dec, 2025 10.00 Lacs

Gwalior - Madhya Pradesh

Tender For supply of orthopedic implant - d.h.s.plate l/b(38 mm)with r/h 125 ,to 140 , 2 holes--8holes, 9 holes--18 hole, d.h.s. screw 22 mm threading with compression screw (top-bolt).(36mm) 115mm,in 5mm increments., d.c.s. plate(95)with r/h holes, 4 holes -10 hole, 11 holes -24 hole, condylar buttress plate with r/h, 3 holes -10 hole, 11 holes--20 hole, distal femur locking compression plate (right & left) anatomical pre shaped & contoured with self-trapping locking head screws" with r/l/holes for metaphyseal portion of plate & combi holes for shaft of plate., medial & lateral proximal tibial buttress plate (t- & l-shape) as per ao specifications. { t- buttress}locking, 3 holes--10 hole, 11 holes -20 hole, proximal lateral tibial locking plate for 405 mm screw, 2 holes -08 hole, 09 holes --13 hole, dital medial tibial locking plates 2.7/3.5mm, 4 holes--08 hole, 09holes--14 hole, anrerolateral distal tibial locking plate 3.5 mm, 4 holes --08 hole, 09 holes--14 hole, proximal humerus locking plate (philos) plate, 3 holes --07 hole, 08 holes --12 hole, contoured locking plate for distal end humerus.(prices to be quoted separately for the following 2 items)., 3 holes --07 hole, 08 holes--14 hole, d.c.p. small 3.5, 4 holes --08 hole, 09 holes--14 hole, d.c.p. narrow 4.5, 4 holes --10 hole, 11 holes--20 hole, d.c.p.board. 5 holes to 20 holes 4.5, 5 holes --10 hole, 11 holes --20 hole, l.c.p. small locking 3.5, 3 holes --08 hole, 09 holes --14 hole, l.c.p. narrow locking 4.5, 3 holes --10 hole, 11 holes --20 hole, l.c.p. board locking 4.5, 3 holes -10 hole, 11 holes --20 hole, cortical screw 4.5mm(tpi-20)14,16,18 ..60mm increments, cortical screw 3.5mm(tpi-20)8,10,12 .mm, in 2 mm,increments, locking cortical screw 5.0mm 14,16,18 .60mm,in 2mm,increments, locking cortical screw 3.5mm. 8,10,12 60mm,in 2mm increments., 16mm threaded cannulated cancellous screws 4mm. 25,30 115mm,in 5mm increments, fully threaded locking solid cancellous screws 6.5mm 25,30 .115mm,in 5mm increment, interlocking femur nail ( as per ao specifications) with compatible locking bolts diameter- 8mm to 12mm - length-340 to 440mm, proximal femur nail(p.f.n.) (as per ao specification)with compatible locking bolts diameter- 8mm to 11mm length-340 to 440mm, interlocking tibia nail(as per ao specification)with compatible locking bolts diameter- 8mm to 11mm length-280 to 380mm, interlocking bolts(as per ao specification) diameter- 2.9mm length-12 to 30mm diameter-3.9mm length-14 to 48mm diameter- 4.9mm length-16 to 120mm, proximal bolt p.f.n. cannulated(as per ao specification) diameter- 6.4mm length-60 to110mm diameter- 8.0mm length-60 to 120mm, titanium elastic nailing system(tens), non fenestrated bipolar prosthesis 37.39, .51,53mm, bone cement (price to be quoted separately for the following 4 items) 1. high viscocity poly methyl meth-acrlate 40gms with working time of 5-6 min. 2. medium to low viscocity poly methyl meth-acrylate 40gms 3. high viscocity poly methyl meth-acrylate 40gms with working time of 5-6 min with gentamycin. 4. medium to low viscocity poly methyl meth-acrylate 40gms with gentamycin. cost of disposable nozzle to be provided separately., k wires ----0.5mm,1.5mm,2mm,2.5mm,3mm, malleable wires --- different gazes., austein moor prosthesis 37-53, interlocking humers nail with compatible locking band, modular bipolar prosthesis 37--53, total hip prosthesis fenestrated, total hip prosthesis non fenestrated, total knee prosthesis fenestrated, total knee prosthesis non fenestrated, sanction drain 500 ml 12, 14, 16, soframycin glycerin dressing, silk no 1, bitadin solution 100 ml, traction kit a/k, b/k, bitadin powder 15mg, dyanaplast, prolene 2-0, polypipe drain, harniya mess kit, sumag ointment, lignocaine 10% spray, 1.5 mm mini plate (2 hole gap, 4 hole gap, 6 hole gap), 2 mm mini plate (2 hole gap, 4 hole gap, 6 hole gap), 2 mm 900 plate (lt & rt) 2 pair, 4 hole gap, 2 mm plate t plate 4 hole gap, 2 mm 3d plate 2x2 hole, 2.5 mm plate (

CTN :42914947

09 Dec, 2025 NA

Mandala - Madhya Pradesh

Tender For supply of orthopedic implant over all rate will be considered as l1 not seprate item rate - ortho implants, a.o. clamp, c.c. screw 4.0mm (15mm - 85mm), c.c. screw 6.5mm 16mm threaded (25mm - 110mm) (titanium), c.c. screw 6.5mm 32mm threaded (25mm - 110mm) (titanium), c.c. screw 6.5mm full threaded (25mm - 110mm) (titanium), cable synthesis, calcancal plate (steel), calcaneal plate (titanium), cancellous locking fully threaded screw 6.5mm, cancellous locking partially threaded screw 6.5mm, cancellous screw 6.5mm full threaded (steel), centre slotted bolt, clavicle nail, d.h.s. plate long barrel (all size), d.h.s. plate short barrel (all angle & size), dcp locking plate narrow, dcp small locking plate (all size), denham pin (all size), dhs screw 60 to 110 mm, distal femoral nail (sizes : width 9-12mm & length 5-35cm), distal radius locking plate ellies type, distal tibia locking plate (5 to 8 hole) anatomic contoured, distal tibia locking plate screw (2.7mm), distal tibia nail sizes (width 8 mm to 10mm) length : 28-38cm., elastic nail / stainless steel nail (size 3 to 4mm) / 10.5, ellis buttress plate (3 to 8 hole) for radium (all size), ender nail (size : width 3, 3.5 & 4mm), female post (1 hole, 3 hole, 5 hole), femur interlocking nail sizes (width : 8mm to 12mm length : 36 cm to 44cm), flexible drill bit (all size), guarded drill bit, half pins, half rings (s.s.) (all size), herbert screw 4mm thickness (titanium), hexagonal socket, hollow connecting rod (8"-20") 10mm, hook plate for olecranon, humerus interlock bolt 3.4 bolt, humerus interlocking nail (all size), 1/3 tubular plate (4 to 8 hole), ilizarov and other external fixator implant, illiosacral screw (all size), inter lock bolt 4.9 mm (length 18 mm to 60mm), interlocking bolt 3.9mm (length 18 to 52mm), italian arch (s.s.), jess fixator / distractor set, k wire bayonet tip, k-nail for femur (sizes : width 7-9mm, length 26-38cm), k-wire (1.8/2.0/2.5mm width) (6" to 9"), k-wire trochar tip, locking cortical screw 3.0mm, locking cortical screw 4.0mm, locking cortical screw 5.0mm, male post (1 hole, 3 hole, 5 hole), malleolar screw 4.5mm (15mm to 95mm), mini plates (non locking) for metacarpal fixation 2-8 hole mini plates, thickness 2.5mm, 6mm to 16mm length, multiplanar clamp, narrow dcp for tibia and hemerus (4.5mm), nuts, olive wires, ordinary bolt, pelvis - contoured plate, spring plate, symphysis plate, proximal (upperend) tibia hokey plate (left and right) 6 to 12 hole, proximal bolt p.f.n. 6.5 mm (60-100mm), proximal bolt p.f.n. 7.5mm (70-110mm), proximal femoral locking compression plaet, proximal femoral nail - long (sizes : width 9-12mm & length 36-42cm), proximal femoral nail - short (sizes : width 9-12mm & length 25mm), proximal humerus locking plate (4-6 hole) philos type, proximal tibia i buttress plate (4-10 hole), proximal tibia locking plate (rt. and lt.) (5 to 12 hole), proximal tibia nail sizes (width 8mm to 10mm) length : 28-38 cm., proximal tibia t buttress plate (4-10 hole), rail road external fix. (8", 10", 12", 16") / lrs, rancho cube (1 hole, 2 hole, 3 hole), reconstruction plate 3.5mm (all size), reconstruction plate 4.5mm (all size), rod to rod clamp, sacroillac screw (all size), schanz pin (2.5,3,3.5,4,4.5mm), schanz pin fixation bolt, screw for mini plates thickness 2.5mm, 6mm to 16mm length, side slotted bolt, simple cancellous screw 4.0mm (15mm-85mm), simple cancellous screw 6.5mm 16mm threads (steel), simple cancellous screw 6.5mm 32mm threads (steel), simple cortical screw 3.5mm, simple cortical screw 4.5mm, small dcp (3.5mm), scanz, square radius nail (width 2,2.5,3 & 3.5mm), square ulna nail (width 2,2.5, 3 & 3.5mm), ss wire (16 to 24 g), steinmann pin (all size), straight plate (2 hole, 3 hole, 4 hole), straight plate with threaded rod - 6 hole, t and l locking buttress (4 to 8 hole), taper schanz pin 6.5mm, telescopic nail (all size), telescopic rods (8", 10", 12"), tensioner / dynamometer, threaded rods (4",