Latest overhead bed table Tenders | Government overhead bed table Tenders

Central Government/Public Sector

CTN :41885819

29 Oct, 2025 11.40 Crore

Ranikhet - Uttarakhand

Tender For corrigendum : provn of icu, ot, hdu and allied ancillaries in mh ranikhet. - phase-i schedule a part-i (building work), construction of block of tech building for hospital icu, ot, hdu and allied ancillaries alongwith rcc covered ramp ( g+1) (rcc framed structure) , with permanent specification including plinth protection all as shown on drawings and as specified., construction of block of pump house (rcc framed structure) , with permanent specification including plinth protection all as shown on drawings and as specified., construction of under ground static water tank of capacity 100 kl, complete all as shown on drawings and as specified., schedule a part ii-a (internal water supply) for details refer sch a in pdf folder, schedule a part ii-b (internal water supply), s&f health faucet (abs body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and abs wall hook including making connections and fixed in position complete all specified and directed., s&f brass cp mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all specified and directed., s&f brass chromium plated angle valve, fancy type screwed for iron pipe suitable for 15 mm bore pipes complete all specified and directed., s&f brass chromium plated shower rose with 150 mm long cp shower arm 125 mm size revolving type suitable for 15 mm bore pipes, complete all specified and directed., schedule a part iii-a (internal electrification) for details refer sch a in pdf folder, schedule a part iii-b (internal electrification), m & l for point wiring using 1.50 sqmm size, pvc insulated, unsheathed 1100 volts grade, is-694 single core multi-stranded (frls-h) copper conductor cable in proper colour coding drawn into and including metallic rigid conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed, sunk cast iron or 1.6 mm thick pressed modular steel terminal box for mounting fittings i.e, modular switch / sockets incl cover plate with frame including one continuous run of pvc insulated (green colour) 1.50 sqmm size stranded frls-h copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed for the following: -, note: (i) also includes inverter wiring with one run of inverter wire 1.5 sqmm all alongwith circuit also included. (ii) all items used should be isi marked. (iii) cutting chases for concealed type point wiring including making good the same with plaster/putty is deemed to be included in quoted rate by the contractor. (iv) accessories modular metal boxes, cover plate inner & outer is also deemed to be included in quoted rate., (a) one light point point /bell buzzer/ ceiling fan/exhaust fan point controlled by one-one way switch. ( 9 points for lift schedule), (b) one three pin 5 amp socket on same board with other switches., (c) one three pin 5 amp socket on independent board, (d) all as per item no 5.01 above but for two way wiring, (e) all as per item no 5.01 above but point wiring with cable 2.50 sq mm size, with earth continuity conductor of size 2.50 sq mm. ( 9 points for lift schedule), supply and fix high quility led t5 integrated batten tube light 20 watt with aluminium extrusion with frosted pmma/pc diffuser, internaly pre wired of 1.5 sqmm twin twisted flexible cable incl connection with ceiling rose all as specified & directed., supply and fixing led batten light fitting 20w, 220v,with microwave motion sensor based technology with aluminium housing & integrated electronic driver of make havells with cat part no lumilinesmart20wled865pcwh or equivalent make of bajaj/philips/crompton complete all as specified & directed., supply and fix led bulb 9 watt complete all as specified and directed., s & f mccb 4 pole 200 a,

CTN :42285920

27 Oct, 2025 NA

Mettur - Tamil Nadu

Tender For mtps i es circle em ii division sd ii painting and rectification of existing damaged -15 nos of street light pole junction boxes in cooling tower and 18 nos of 4m high hot dip galvanized octagonal pole in cwph cooling water cannels cooling water sampling points, clarifiers of unit-i to iv, misc.clarifier and alum dozing area at clarifiers

Central Government And Public Sector

CTN :42342625

27 Oct, 2025 NA

Tinsukia - Assam

Tender For (a) 3 phase direct on line starter with 2 sets of 3 pole / 4 pole contactors (2 sets ac contactor coils, 25 amp each), each set controlled separately by 415v. 50hz ac contactor coils. one set of contactor coil is to be controlled by the forward direction of rotation through an inching type push button and the other set through another inching button to control the reverse direction of 7.5 hp, 3phase,50hz, 415volts, ac motor. there must be electrical interlocking contact to prevent both set of contactors to close simultaneously. each of above push buttons should have one normally closed auxiliary contact and one stop push buttons are required. the starter shall be complete with over load, shall be wired and shall be provided with power plug and socket with locking arrangement. each starter is to be provided with 2 nos. power plug and sockets and 2 nos. of control plug and sockets. maximum dimension of the starter should not excessed 280mm (b) x 430mm (l) x 175mm (t) irrespective of dimension. (b) supply and installation of material for 7.5 hp dol starters (individual) in sl no. (a) of 25t universal jmp jack :-(i) up indicating led lamp 415v ac (red) qty-1 no. (ii) down indicating led lamp 415v ac (red) qty-1 no. (iii) trip indicating lamp 415v ac (amber) qty-1 no. (iv) ) 415v ac 2no+2nc fs-c 45mm control relay qty-1 no. (v) 3 phase (ryb) indicating led lamp, (vi) reset button to release overload relay in case of tripping qty-1 no. & (vii) 30a 3 way terminal block qty-2 nos. (1 set consisting of sl no. i to vii) (1 set complete modified starter consisting of sl no. a & b). make :c&s/l&t/havells.

corporations/Associations/Others

CTN :42302536

22 Oct, 2025 NA

Multi City - Multi State

Tender For auction sale of teak -v-poles,teak- iv b- timber,teak poles-iv,teak pole v,teak pole iii,teak pole ii,teak pole iv,teak poles-v,timber iv,teak pole v c,teak billet,teak pole ii c,teak billets

CTN :42249936

21 Oct, 2025 NA

Delhi - Delhi

Tender For supply of stln hh re mg spares c c - temp sensor mk iii iv , poly v belt , cogged v belt 1325 mm long , de aeration tank , drive disc clutch plate , driven disc , wabco clutch booster , kit master cyl , uj kit spider brg , fuel filter cum water seprator , pre filter cum fuel water seprator , rear view mirror , regulator assy lh , regulator assy rh , air horn assy , door beeding , door lock asssy rh , door lock assy lh , horn change over switch , clutch master cyl assy , horn 24v , switch assy change over , fog lamp with bulb 24v 60w yellow , isolater switch , fog lamp 24v , 2 pole fuse isolator switch , speedometer cable 3000 mm long , spark plug , filter assy oil , cover assy clutch , disc clutch , bearing clutch release , belt water pump , mounting eng front , element air cleaner , filter fuel , radiator assy , coil assy ignition , relay main , bulb 12v 21w , bulb 12v5w , bulb 12v 5w , lamp assy front fog 12v , bulb 12v 21 5w , horn assy high tone , horn assy low tone , blade assy wiper , knuckle bearing , bearing rear axle , spring pad , brake pad , cap assy fuel tank , brake pad caliper pad set , oil filter sx4 , pad assy set , plug spark , fuel filter n m , cartridge oil filter , brake disc pad assy , air filter element , cable comp speedometer , damper rear wheel , front foot rest lh , front rear indicator , shoe comp brake p 52 4 , shoe comp brake rear , sparking plug , front fork oil seal , set l side cover black , brg 6203 rs1 c3 , brg 6203 rs1 c3 17x40x12 , clutch cable new model , cush rubber pad , front brake cable , oil filter with o ring kit , speedo cable complete , throttle cable , uce cyl head gasket 350cc , clutch plate , pressure plate , kit brake shoe front , cylinder std kit , chain sprocket set , cam chain kit , side indicator , bulb 12v10w , calipar pad disc pad , kick return spring , sleeve kick starter //bid details 2 / 65

CTN :42252341

27 Oct, 2025 NA

Pune - Maharashtra

Tender For tender for supply of anganwadi sanitation material set a , sathrog upay material set b , arogya upkendra sahitya , poshan ahar for preganat women , highmast pole - ceiling fan, water jar, cooker, sanitation kit, ro filter, gas grate, photo, cctv, medicines, computer table, medicine rack, ro filter, i.v. stand, bench, fiddle dropper, patient bed, drug administration bed, bmw garbage can, cctv, nutritional food, pole, flood light

Central Government/Public Sector

CTN :42193110

18 Oct, 2025 NA

Bangalore - Karnataka

Tender For bksgteot02 - screened cable 4x0,5mm 600v bk, cable h-bbm 2.5sqmm 2000v red, cap cer npo 33pf 1% 50v smd 0805, connector 16 pole 3.5mm pitch, mini jump shunts 5.08mm, post rect. .025 sq., sub-d receptacle set 9-pole trachdo1, terminal block housing 5.08 pitch 16 pin, cnctr euro male 32 pole rt angl sldr pin, cnctr female 41 pin, cnctr soc test dbl pole 2mm, cnctr soc disp 20 pol hztl 7.62x7.62mm, connector single port rj45 cat5, mini jump shunts 2.54mm, terminal block header right angle 16 pin, header 0.25 sq. 2 pin, conn d sub male 50p dd50p364txlf, male insert 15-polig sub-d, trac h, cnctr berg 10 pole vert dbl 2.54mm pitch, header 3 position, cnctr euro feml 32 pole ww22mm rows zb, cnctr berg 14pole vert dbl 2.54mm pitch, cnctr euro feml 32 pin prs fit btb-c, terminal block housing 5.08 pitch 2 pin, terminal block header right angle 2 pin, cnctr euro male 32 pin type c, cnctr euro feml 64 pole with prs fit btb, cnctr dsub feml 9 pin, cnctr euro male 64 pin typ c ra, cnctr feml 48 pole, cnctr euro idc 16pole quickie header, cnctr euro male 48 pole rta b2&32ext zbd, connector header 3 pin 0.1" pitch, conn rj-45 mod jack 2x1 cat3 shielded, conn hdr male vrtl unshrd 2x13th, cnctr euro male 24/7 pole rt angl sldr, cnctr euro male 15 pole faston z32 ext, cnctr berg male 10pole dbl 2.54mm 20.06, diode bridge 25a 400v 1_ 26mb40a, heatsink bga37.5x37.5x18 mpw37.5-18+t710, heat sink bga 35x35x25mm 374824b60024g, heat sink for dpumr q7 board, heatsink bga 35x35x18mm 374724b60024g, heat sink dpumr q7 (m/c), heatsink 300x600x127, heatsink to-220 30c/w pf436g, mini transverse heat sink 30721 th, transistor clamp as heatsink clip, heatsink switch clip 5901g, heat sink - dc dc converter ten 40 th, heat transfer compound, heat sink machined for t03 package, heatsink, heat sink, heat sink, heat sink, enclosure assy ibcn/ipsn, sleeve fbr gls si rbr coated id:7mm, flexible wrappable sleeve 6.35mm, black, dc air cooling fan 158dh4tp13232, sleeve fbr gls si rbr coated id:4.11, side part s-6-220hiet301117p0001, type iv injec/extrc bottom type, type iv injec/extc top type, sleeve fbr gls si rbr coated id:14mm, sleeve fbr gls si rbr coated id:12mm, bar thread 105te with marking l533, profile rear top / bottom vz/h al, fan axial (tarzan) 115vac; tn3a2/tne2a, cover, end sleeve, plastic collar (0.5 x 8mm), corrosion inhibitor - vpci 101, slide latch kit, insulating washer 2 rm10, multiple base cable tie pl, insulator ceramic aio to-220, profile front bottom v2/v al, locking support postmaxpart:47364, profile front top with marking al, measuring terminals1/2" / m16x2, flat tie holder, threaded ridge 104thiet301117p0008 st, handlehiet301117p0010 al, profile middle vz/m al, cable gland type 1060.07.075, guide holder 220hesn454129p0001, card puller top without logo, extra heavy tie mount, blade contact tophiet404190p0002 al, blade contact bottomhiet404190p0001 al, spring .180 o.d. 0.014 dia., profile epdm rubber u10 x 5, polishing kit, fibre optic hfbr-4593z, ty rap bracket, card puller bottom without inscription, scru spec m2.5x11 c409-056 135, sleeve fbr gls 2.5kv red id: 9mm, cable tie fth-15-01, heatshrink tubing atum 8/2 mm bk, jack screw, insulator sleeve d3x1, tyrap bracket (3.65"), flat tie holder, card puller yellow 409.065.885 el369, heatschrink tubing 2.4-1.2mm bk, key slot locking support post 1/4 dia, front member for6u/220 rack abb ref, knob fluted with line indicator, compression spring ci013e 06 s, cbl tie(nylon) b=2.4mm l=203mm ty232m, frontplate traxis ref 7527240, ins strip for 6u/220 rack hesg 455061p1, through bush 1200acomplete, screw base nbt402938p0011, cable tie plt2m, enclosure assy mb8n, pipe insulationdia24x1.93ehn400062p0187, sealing strip self adhesive 10x3mm, ring terminal nylon insulation, front plate withoutgrid print 2 1/3 sep, enclosure assy mb2n, heat sink 160x85x200, thermal compound thermalcote 250g, cable tie, inlet a11 & a21cu rod dia12, rivet blind flat rnd 3.2x9.9 ss, plt frt pc2 1/3s 6xf1014-3kl00, jack sc

Central Government/Public Sector

CTN :42194835

18 Oct, 2025 10.00 Crore

Bangalore - Karnataka

Tender For supply of bksgteot02 - screened cable 4x0,5mm² 600v bk , cable h-bbm 2.5sqmm 2000v red , cap cer npo 33pf 1% 50v smd 0805 , connector 16 pole 3.5mm pitch , mini jump shunts 5.08mm , post rect. .025 sq. , sub-d receptacle set 9-pole trachdo1 , terminal block housing 5.08 pitch 16 pin , cnctr euro male 32 pole rt angl sldr pin , cnctr female 41 pin , cnctr soc test dbl pole 2mm , cnctr soc disp 20 pol hztl 7.62x7.62mm , connector single port rj45 cat5 , mini jump shunts 2.54mm , terminal block header right angle 16 pin , header 0.25 sq. 2 pin , conn d sub male 50p dd50p364txlf , male insert 15-polig sub-d, trac h , cnctr berg 10 pole vert dbl 2.54mm pitch , header 3 position , cnctr euro feml 32 pole ww22mm rows zb , cnctr berg 14pole vert dbl 2.54mm pitch , cnctr euro feml 32 pin prs fit btb-c , terminal block housing 5.08 pitch 2 pin , terminal block header right angle 2 pin , cnctr euro male 32 pin type c , cnctr euro feml 64 pole with prs fit btb , cnctr dsub feml 9 pin , cnctr euro male 64 pin typ c ra , cnctr feml 48 pole , cnctr euro idc 16pole quickie header , cnctr euro male 48 pole rta b2&32ext zbd , connector header 3 pin 0.1" pitch , conn rj-45 mod jack 2x1 cat3 shielded , conn hdr male vrtl unshrd 2x13th , cnctr euro male 24/7 pole rt angl sldr , cnctr euro male 15 pole faston z32 ext , cnctr berg male 10pole dbl 2.54mm 20.06 , diode bridge 25a 400v 1_ 26mb40a , heatsink bga37.5x37.5x18 mpw37.5-18+t710 , heat sink bga 35x35x25mm 374824b60024g , heat sink for dpumr q7 board , heatsink bga 35x35x18mm 374724b60024g , heat sink dpumr q7 (m/c) , heatsink 300x600x127 , heatsink to-220 30c/w pf436g , mini transverse heat sink 30721 th , transistor clamp as heatsink clip , heatsink switch clip 5901g , heat sink - dc dc converter ten 40 th , heat transfer compound , heat sink machined for t03 package , heatsink , heat sink , heat sink , heat sink , enclosure assy ibcn/ipsn , sleeve fbr gls si rbr coated id:7mm , flexible wrappable sleeve 6.35mm, black , dc air cooling fan 158dh4tp13232 , sleeve fbr gls si rbr coated id:4.11 , side part s-6-220hiet301117p0001 , type iv injec/extrc bottom type , type iv injec/extc top type , sleeve fbr gls si rbr coated id:14mm , sleeve fbr gls si rbr coated id:12mm , bar thread 105te with marking l533 , profile rear top / bottom vz/h al , fan axial (tarzan) 115vac; tn3a2/tne2a , cover , end sleeve, plastic collar (0.5 x 8mm) , corrosion inhibitor - vpci 101 , slide latch kit , insulating washer 2 rm10 , multiple base cable tie pl , insulator ceramic aio to-220 , profile front bottom v2/v al , locking support postmaxpart:47364 , profile front top with marking al , measuring terminals1/2" / m16x2 , flat tie holder , threaded ridge 104thiet301117p0008 st , handlehiet301117p0010 al , profile middle vz/m al , cable gland type 1060.07.075 , guide holder 220hesn454129p0001 , card puller top without logo , extra heavy tie mount , blade contact tophiet404190p0002 al , blade contact bottomhiet404190p0001 al , spring .180 o.d. 0.014 dia. , profile epdm rubber u10 x 5 , polishing kit, fibre optic hfbr-4593z , ty rap bracket , card puller bottom without inscription , scru spec m2.5x11 c409-056 135 , sleeve fbr gls 2.5kv red id: 9mm , cable tie fth-15-01 , heatshrink tubing atum 8/2 mm bk , jack screw , insulator sleeve d3x1 , tyrap bracket (3.65") , flat tie holder , card puller yellow 409.065.885 el369 , heatschrink tubing 2.4-1.2mm bk , key slot locking support post 1/4 dia , front member for6u/220 rack abb ref , knob fluted with line indicator , compression spring ci013e 06 s , cbl tie(nylon) b=2.4mm l=203mm ty232m , frontplate traxis ref 7527240 , ins strip for 6u/220 rack hesg 455061p1 , through bush 1200acomplete , screw base nbt402938p0011 , cable tie plt2m , enclosure assy mb8n , pipe insulationdia24x1.93ehn400062p0187 , sealing strip self adhesive 10x3mm , ring terminal nylon insulation , front plate withoutgrid print 2 1/3 sep , enclosure assy mb2n , heat sink 160x85x200 , thermal compound t

corporations/Associations/Others

CTN :41581030

24 Oct, 2025 5.19 Crore

Multi City - Karnataka

Tender For corrigendum : supply of auto electrical items to divisions of nwkrtc - commuter end shield - 268, pole housing bs6 leyland - 267, tata bsiv fixing bracket - 266, tata bsiv i b bracket - 265, tata bsiv bush kit for starter - 264, ud starter solenoid switch (17size nut) (protolite) - 263, ud starter relay (protolite) - 262, ud starter drive teeth (protolite) - 261, ud starter brush gear (protolite) - 260, ud starter armature with bearing (protolite) - 259, ud a/c alternator fan (protolite) - 258, ud a/c alternator repair kit (protolite) - 257, ud engne alternator repair kit (protolite) - 256, ud engne alternator fan (protolite) - 255, ud engne alternator slip ring (protolite) - 254, ce bush for midi bosch - 253, de bush for midi bosch - 252, egt kit for midi leyland lucas - 251, hexagonal screw - 250, orc drive - 249, solenoid switch - 248, fork lever - 247, c e bracket - 246, d e bracket - 245, retaining washer - 244, planetary gear train - 243, sealing cap - 242, c e bracket - 241, d e bracket - 240, c e bracket - 239, solenoid switch - 238, solenoid switch - 237, pulley twin groove - 236, d e bracket assy bs iii - 235, sre bracket assy - 234, ce bracket assy midi ll - 233, worm wh assembly - 232, volvo mxl wheel set for starter - 231, volvo mxl relay for starter - 230, volvo mxl regulator assembly - 229, volvo mxl rectifier assembly - 228, volvo mxl pole housing with coil - 227, volvo mxl pinion for starter - 226, volvo mxl engaging gear lever for starter - 225, volvo mxl drive with sahft assembly - 224, volvo mxl drive lock kit - 223, volvo mxl drive assembly - 222, volvo mxl d e shield - 221, volvo mxl brush gear assembly - 220, volvo mxl b9r stater for alternator - 219, volvo mxl b9r solenoid switch - 218, volvo mxl b9r small bearing for alternator - 217, volvo mxl b9r rotor assembly - 216, volvo mxl b9r regulator assembly - 215, volvo mxl b9r rectifier assembly - 214, volvo mxl b9r big bearing for alternator - 213, volvo mxl b9r bearing fitting cap - 212, volvo mxl b9r armature with brg - 211, volvo mxl b11r small bearing - 210, volvo mxl b11r regulator assembly - 209, volvo mxl b11r rectifier assembly - 208, volvo mxl b11r big bearing - 207, volvo mxl b11r bearing fitting cap - 206, volvo mxl b11 rotar assembly - 205, volvo b11r stator for alternator - 204, ud engine stator (protolite) - 203, ud engine rotor (protolite) - 202, ud a/c stator (protolite) - 201, ud engine starter assembly. (protolite) - 200, ud a/c rotor assembly (protolite) - 199, ud a/c regulator box assembly (prestolite) - 198, ud engine regulator box assembly (prestolite) - 197, ud a/c rectifier assembly (prestolite) - 196, ud engine rectifier assembly (prestolite) - 195, ud starter drive assembly with egt (gear train) (prestolite) - 194, ud starter pole housing with filed coil - 193, ud engine alternator assembly. (protolite) - 192, ud engine de shield (protolite) - 191, ud a/c de shield (protolite) - 190, ud de bearing nsk make - 189, ud de bearing nsk make - 188, ud corbon brush (engine alternator) - 187, ud engine ce shield (prestolite) - 186, ud a/c ce shield (prestolite) - 185, ud ce bearing nsk make - 184, ud a/c alternator corbon brush with holder (prestolite) - 183, ud a/c alternator assembly. (protolite) - 182, through stud - 181, through bolt - 180, tc stator assembly - 179, tc solenoid switch (2696 4030 a) - 178, tc solenoid switch - 177, tc rotor assembly - 176, tc regulator assembly - 175, tc rectifier assembly - 174, tc rectifier assembly - 173, tc pully (8 groove) - 172, tc pole screw - 171, tc main field coil assembly - 170, tc lever & peg assembly/ engaging lever - 169, tc bs-iv stator for alternator - 168, tc bs-iv stator - 167, tc bs-iv rotor - 166, tc bs-iv i b bracket - 165, tc bs-iv fixing bracket - 164, tc bs-iv field coil - 163, tc bs-iv drive assembly - 162, tc bs-iv de bracket - 161, tc bs-iv armature - 160, tc bs-iii regulator - 159, tc bs-iii rectifier assembly - 158, tc bs-iii field coil - 157, tc bs-iii bearing bush as

State Government

CTN :42135461

28 Oct, 2025 5.00 Lacs

Bhopal - Madhya Pradesh

Tender For notice inviting e-tender supply of electric items - ceiling rose 3 plate, (a) polycarbonate, (b) modular, blower with vaccum complete heavy duty as per specification & as required, pvc round sheet (a) 3 mm thick, (b) 2 mm thick, insulation tape 7 mtr., switch socket combined 15 amp 250 volt 3/6 pin flush type, drill machine bit 6mm to 20mm(a) r c c bit, (b) iron/metal bit, (c) wooden bit, (d) diamond bit for porcelain, mpp condenser 440 volt single phase (a) 2.25/2.5 mfd, (b) 3.15 mfd, (c) 4.00 mfd, (d) 6.00 mfd, switch(a) 6 amp sp 250 volt two way f/t, (b) 6 amp sp 250 volt modular, (c) 16/20 amp sp 250 volt modular, (d) 10 amp sp 250 volt modular switch 2 way, (e) blank plate 1 module, (f) surface switch 6 amp, socket(a) 6 amp 250 volt 3 /5 pin f/t, (b) 16 amp 250 volt 3 /6 pin f/t, (c) 10 amp 250 volt 3 /5 pin modular type, (d) 16/20 amp 250 volt 3 /6 pin modular type, 6 amp 250 volt bell push switch(a) 6/10 amp sp 250 volt modular switch bell push, (b) f/t bell push, (c) surface bell push 6 amp, 2/3 pin plug top(a) 2 pin top , (b) 6 amp 250 volt 3 pin top, (c) 16 amp 250 volt 3 pin top, holder(a) polycarbonate pendent, (b) brass pendent, (c)polycarbonate batten / angle holder, (d)modular batten / angle holder, gls lamp(a) 100 w , (b) 200 w, call bell(a) gong bell, (b) buzzer, (c) ding dong bell, (d) multi sound bell, (e) remote/cordless bell, multi core round frlsh pvc insulated copper (flexible) conductor & pvc sheathed cables 1100 volts(a) two core 1.00mm (32/0.2 mm), (b) three core 1.5mm (30/0.25mm), (c) three core 2.5mm (50/0.25mm), (d) three core 4.0mm (56/0.3 mm), led lamp(a) 4/5 watt 250 volt, (b) 8/9 watt 250 volt, (c) 12 watt 250 volt, (d) 14/15 watt 250 volt, (e) 18/20 watt 250 volt, (f) 45 watt 250 volt, (g) 50 watt 250 volt, flush type electronic fan regulator step type 100 watt, step type modular electronic fan regulator(a)100 watt (1 module), (b)100 watt (2 module), mccb 3 phase, 3 pole, 50 hz, 415 volts (with thermal-magnetic release)(a) mccb 100 amp, 25 ka, (b) mccb 125amp,25 ka,3p, (c) mccb 160amp,25 ka,3p, (d) mccb 200amp,25 ka,3p, (e) mccb 250amp,36 ka,3p, (f) mccb 315amp,36 ka,3p, (g) mccb 400amp,36 ka,3p, (h) mccb 500amp,36 ka,3p, mccb 3 phase & n, 4 pole, 50 hz, 415 volts (with thermal - magnetic release)(a) mccb 125amp, 25ka,4p, (b) mccb 160amp, 25ka,4p, (c) mccb 200amp, 25ka,4p, (d) mccb 250amp, 36ka,4p, (e) mccb 315amp, 36ka,4p, (f) mccb 400 amp, 36ka,4p, (g) mccb 500amp, 36ka,4p, mcb c series, 240/ 415 v, 50 cycle, 10ka / 15ka(a) single pole (i) mcb sp 6a to 32a 10ka, (b) double pole(i) mcb dp 32a / 40a 10ka, (iii) mcb dp 63a 10ka, (c) triple pole(i) mcb tp 63a 10ka, (ii) mcb tp 100a, 15ka, (d) four pole (i) mcb fp 63a 10ka, (ii) mcb fp 100a, 15ka, hbc/hrc fuse links bolted type(i) 20 amp to 32 amp, (ii) 36 amp to 63 amp, (ii) 36 amp to 63 amp, hbc/hrc fuse links knife (din) type(i) 63 amp to 100 amp, (ii) 125 amp to 160 amp, (iii) 200 amp to 315 amp, (iv) 350 amp to 400 amp, dmc / nylon fuse holder fitting / fuse base for knife type hbc / hrc fuse links(i) 20 amp / 415 v, (ii) 32 amp / 415 v, (iii) 63 amp / 415 v, (iv) 100-125 amp/ 415 v, (v) 160 amp / 415 v, (vi) 200-250 amp/415 v, (vii)300-350 amp/415 v, (viii)400-500 amp/415 v, pvc insulated cable frls with copper multi strand conductor(i) 1.0 mm, (ii) 1.5 mm, (iii) 2.5 mm, (iv) 4.0 mm, (v) 6.0 mm, (vi) 10.0 mm, (vii) 16.0 mm, modular cover plate(i) 1 or 2 module, (ii) 3 module, (iii) 4 module, (iv) 6 module, (v) 8/9 module, (vi) 12 module, (vii) 16 module, (viii) 18 module, electric ceiling fan of double ball bearing complete(i) ceiling fan (isi marked)- 1200 mm sweep,with minimum air delivery 210m /min and service value>4.oo as per bee (bldc), (ii) ceiling fan (isi marked)- 1200 mm sweep,with minimum air delivery 210m /min as per 5 star rating (energy saver), (iii) ceiling fan ornamental (isi marked)- 1200 mm sweep,with minimum air delivery 210m /min and service value>4.oo as per bee (bldc), wall mounting fan oscillating type(i)

Overhead Bed Table Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government