Latest packing machine scrap Tenders | Government packing machine scrap Tenders

CTN :40891735

22 Jul, 2025 4.68 Lacs

Kota - Rajasthan

Tender For corrigendum : supply of sand filter media for gravity filter beds installed at stage-i and ii water pretreatment plant, kstps, kota.

CTN :41067144

22 Jul, 2025 8.85 Crore

Patna - Bihar

Tender For mgsy/25-26/siwan-1 /01 - high level bridge across river on const. of rcc hl bridge with approach road over sona river between pakri makriyar to chhotka manjha in block - siwan sadar , rwd division siwan-1 , district - siwan , bihar, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity a) initial and routine load test, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity a) initial and routine load test, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity b) lateral load test, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diameter. all complete job as per specifications and direction of e/i., providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres(extra pile length). stripping off rcc m35 in the pile up to cut off level and disposal of debris with all leads and lifts., sand filling in foundation trenches as per drawing & technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m-30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design upto 5 m hieght, providing rcc m-30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design beyond 5 m and upto 10m hieght, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the fu

CTN :41082914

22 Jul, 2025 4.44 Crore

Patna - Bihar

Tender For (nabard)/25-26/rajauli/01 - 1) name of work: construction of hl rcc bridge over khuri river in gram panchayat bakshanda, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diasmeter all complete job as per specifiactions and direction of e/l, providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of reinforced concrete pile head complete as per drawing and technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 .all complete job as per design upto 5 m height, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications. elastomeric bearing & pad, providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the full height compacted., providing rcc m 30 grade & super structure :--furnishing and placing reinforced/ prestressed cement concrete in super-structure as per drawing and technical specification beyond 5 m and upto 10m hieght (t beam slab), providing hysd bar in all types of rcc work:-- supplying, fitting and placing hysd bar reinforcement in super-structure complete as per drawing and technical specifications ., wearing coat :-- providing and laying cement concrete wearing coat m-30 grade including reinforcement complete as per drawing and technical specifications, providing rcc m30 grade in railing:-- construction of precast rcc railing of m30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications., providing drainage spout:-- drainage spouts complete as per drawing and technical specification, providing pcc m15 grade below approach slab:-- pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, providing pcc / rcc m30 in approach slab:-- reinforced cement concre

CTN :41037844

22 Jul, 2025 13.03 Crore

Patna - Bihar

Tender For mgsy/25-26/balia/01 - construction of h.l rcc bridge ( 8 x 21.750 m) in between t01 se sonwarsha path under shamho akha kurha block in the district of begusarai, excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification. as per morth clause no. - 1200&, plain cement concrete in open foundation complete as per drawing and technical specifications pcc grade m -15 below abutment well cap, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification rcc m-35 in well curb, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well bottom plug, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rcc m-25 in well steining, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well intermediate plug, well sinking as per technical specification, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), for 7.00 m dia well :; pier, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), sand filling in wells complete as per drawing and technical specifiction. as per morth clause no. - 1207, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rccm-35 in well cap, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 67.622+155.612 =223.234 t, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf , qty = 23.851+24.330+1.762+0.313+1.289+1.139 =, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., furnishing and placing reinforced/prestressed ceme

CTN :41037857

22 Jul, 2025 9.18 Crore

Gopalganj - Bihar

Tender For mgsy/25-26/gopalganj-1 /01 - high level bridge across river on barai patti to niranjana janewali path me dhawast screw pipe pul ke asthan par new pul nirman in block - gopalganj , rwd division gopalganj-1 , district - gopalganj , bihar, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity a) initial and routine load test, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity a) initial and routine load test, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity b) lateral load test, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diameter. all complete job as per specifications and direction of e/i., providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres(extra pile length). stripping off rcc m35 in the pile up to cut off level and disposal of debris with all leads and lifts., sand filling in foundation trenches as per drawing & technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m-30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design upto 5 m hieght, providing rcc m-30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design beyond 5 m and upto 10m hieght, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to th

CTN :41037847

22 Jul, 2025 12.35 Crore

Begusarai - Bihar

Tender For mgsy/25-26/begusarai/01 - construction of h.l rcc bridge ( 6 x 21.750 m) in between mathar kasimpur kurmi tola road and gupta lakhminiya rcd road under matihani block in the district of begusarai ., excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification. as per morth clause no. - 1200&, plain cement concrete in open foundation complete as per drawing and technical specifications pcc grade m -15 below abutment well cap, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification rcc m-35 in well curb, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well bottom plug, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rcc m-25 in well steining, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well intermediate plug, well sinking as per technical specification, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), for 7.00 m dia well :; pier, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), sand filling in wells complete as per drawing and technical specifiction. as per morth clause no. - 1207, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rccm-35 in well cap, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 225.00 per m for service road., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in one water, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 67.622+155.612 =223.234 t, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf , qty = 23.851+24.330+1.762+0.313+1.289+1.139 =, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. co

Central Government/Public Sector

CTN :41025788

25 Jul, 2025 NA

Singrauli - Madhya Pradesh

Tender For supply of 100259770_ 10_ m0340509505_ filter media sand, size 0.45mm - 0.70mm , 100258853_ 10_ m0340061402_ sand, silica, aar-m-916-51, f/locomotive

CTN :41054816

23 Jul, 2025 NA

Ambala - Haryana

Tender For supply of membrane , carbon , filter media , multiport 10 56 , pipe and misc items , paint enamel white , paint og rfu , turpentine oil , paint sand colour , pvc wire 1.5 sq mm , pvc wire 2.5 sq mm , flexible wire , switch and socket 5 amp , switch with socket 15 amp , membrane ro , bag filter , sponge filters , dosing antiscalent chemical , hardness kit , fuel filter , fuel filter paper , fuel pipe feed pump to fuel filter , fuel pipe filter to fip , fuel pipe tank to feed pump , fd wash basin steel , fd wc , exhaust fan , mcb 100 amp , fuel filter cloth type , fuel filter paper type , oil filter , fan belt , wire flexible 4mm , fuel pipe main tank to feed pump , fuel pipe feed pump to fip , hdpe jerricane 30 ltrs , repair of toilet , alternator , baby filter , repair of avr and armature of genr , rotary assy winding , avr , bty 12v 180ah , oil filter cloth type , fuel pipe over flow to fuel pump , banjo belt , oil transducer , temp gauge , amp mtr gauge , oil pressure gauge , ignition switch , self starter , mcb 40 amp , push button , air cleaner , air cleaner hose , alternator rectifier plate , bty 12v 70ah , cable four core 16 sqn , led bulb , laip , syntex tank 500 ltr

State Government

CTN :40446431

22 Jul, 2025 25.09 Lacs

Jamnagar - Gujarat

Tender For corrigendum : supply and complete servicing/ overhauling & replacement of media and nozzle in side stream filters at sikka tps. - side stream filtration media- (quartz sand) for unit ssf tank, complete strainer/nozzel set (approx.1100) for unit ssf tank, bottem/ strainer plate (is:2062 gr.a 8mm thick) for unit ssf tank, work of replacement of filtration media ( quartz sand ) & strainer / nozzles., work of replacement of bottom/ strainer plate

CTN :41005457

22 Jul, 2025 13.18 Lacs

Narasaraopet - Andhra Pradesh

Tender For replacement of filter media to slow sand filter 1 of the pws scheme in ganapavaram village of nadendla mandal est. cost rs. 16.00 lakhs

Packing Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government