Latest packing sheet Tenders | Government packing sheet Tenders

Central Government And Public Sector

CTN :40534153

09 Jun, 2025 16.93 Lacs

Agra - Uttar Pradesh

Tender For repairs to jere hamam and langer khana area at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (packing in bags 25kg & 50 kgs) (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (bansi paharpur qurry).(rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), water proofing compound (rate including g.s.t.)., clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), taking out of angle iron frame 40x40x6 mm having 12mm square bar with spikes 1.25mtr high and hold fast by manual labour and stacking within 50 meters lead etc. complete in all respect. (rate including g.s.t.), taking out stone masonry manually bit by bit without disturbing to the adjoining structure including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge : in cement mortar. (rate including g.s.t.), random rubble stone masonry with hard stone in super structure in cement mortar 1:6 (1cement 6 c. sand) including pointing, t&p, scaffolding etc. complete. (rate including g.s.t.), cr stone masonry with 70% available stone and 30% new stone in super structure and plinth with cement mortar 1:6 (1 cement: 6 coarse sand), pointing, scaffolding etc. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement: 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), repairing of old existing grills in boundary wall including supply of required materials, welding, fabricating & labour etc. complete. (rate including g.s.t.), providing & fixing m.s. gates of required pattern with angle iron frames (50x50x6)mm size graded with 10 cm c/c sq. bars 16mm size pointed at the top extra with same curved bar and each frame having gusset plate 6mm thick at corners & center and provision for hinges and locking arrangement with supply of r.s. joist (200x100x5.7)mm section for hanging m.s. gate including nut bolts, cutting fabricating welding etc. complete. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6) mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), coursed rubble masonry with hard stone (first or second sort) in facing up to 22.50 cm thick random rubble masonry in back side in superstructure above p

Central Government/Public Sector

CTN :40538983

13 Jun, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of wheel distance measuring gauge as per following specn:- length: 1596 +/- 0.5mm (range 1585 to 1605mm) for meserment . accuracy : 0.1mm through vernier scale. setting : must set 90 degree to the flange . parallelism : to the main axle prospective of track level which should be indicated by the same equipm ent . material: hard extruted steel tube with 1.2mm thickness. fixed lug on one end spring loaded moving lug on the other end with locking system. spirit level in the center of the gauge. packing: wooden box. [ warrant y period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40537902

04 Jun, 2025 NA

Kapurthala - Punjab

Tender For supply of exterior stickers for lhb 2nd ac chair car coaches, as per drawing: 1 10113.0. 11.300.001 alt ar w/o item no.1,7 & 27 and follow material spec. to rdso specification no . rdso/2006/cg-13 rev-01 option b (ref. md46271 dated 01.04.25), packing instruction: exterior sticker/ marking diagram outside set of sidewall stickers should be rolled fir mly on a cardboard tube/pipe of aprox. 03 inches diameter of sufficient strength and le ngth more than sticker 2-3 inches of maximum width of sticker . endwall stickers of sa me set should also be rolled on seperate another cardboard tube/pipe (having similar dimensional and strength parameter ) in same way. both tubes of one set should be pac ked together in a bio degradable transparent polyethylene packing. stickers or any ed ge of sticker should not be found folded in packing. vinyl film side of stickers should be on the outside of tubes.these individual sets are further to be packed in card box (c ontaining bulk quantity of sets). a list should be pasted on each set of transparent po lyethylene packing and also on card box (containing bulk quantity of sets) showing pl no., item description, po no., name and address of supplier, date of manufacturing, lot number, lot quantity, list of items in a set etc. [ warranty period: 30 months after the date o f delivery ]

Central Government/Public Sector

CTN :40530048

30 Jun, 2025 NA

Kapurthala - Punjab

Tender For supply of railway carriage fan,300mm sweep,fixed type,110v ac with crash worthy(with frp blade)as per rcf am4(ty-i),fan guard to drg.cc76261,alt-a., as per drawing : is:6680-92 with rdso annexure-h(2005) with crashworthy features as per rcf am-4 & rcf cor-1,3&4 (type-i) & blade as specified at col-i of rcf amdt-4, packing instruction: suitably c overed with biodegradable polythene and packed in card box.the material used for pr oduct packaging shall be eco- friendly.each container shall be stenciled /labeled , con signee name, order no,pl's no ,description of item, batch no, drg/spec no, qty, firm's na me, & date of despatch etc. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40538394

09 Jun, 2025 NA

Kapurthala - Punjab

Tender For supply and installation of single inlet centrifugal fan suitable for 3-phase , 415v ac, along with ducting arrangement for pantry in vande bharat trainsets. specia l note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/e mp/1 dated.01.04.2025, as per drawing: edts-331, rev. a, corr-1,2 and 3. (type-iii), packing instr uction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charg er, self priming monoblock pump, inverter, change over control box etc: suitably cove red with biodegradable transparent polythene and packed in wooden cage: bottom fra me to be made of wooden planks 20mm thick &should have support of at least 3 woode n battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips o f 20x100mm size. gap between each strip should not be more then 100mm. the material u sed for product packaging shall be eco-friendly.a list should be pasted on each wood en cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's n ame &address and date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed bel ow: a) name of the manufacturer b) purchaseorder number c) pur chaseorder date d) uniqueserial number (or lot number for bulk items) of the manufacturer or e) dateof manufacture f) deliver ychallan no. g) deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detail ed above. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40538528

10 Jun, 2025 NA

Kapurthala - Punjab

Tender For supply of interior stickers with braille script for lhb gs (antyodaya) coaches. , as pe r drawing: lg64005 alt d item no.1,6,11 to 16,18 to 20,22,23,25,27 and 29 with braille script to icf/md/spec-253, rev.00 amd-03., packing instruction: lettering inside: one complete set o f lettering inside should be packed in cardboard box. different subsets should be mad e & a list of items should be pasted on each packet of subsets. letters packed in each s ubset under different headings are as under:- plumbing : emergency flush button, pres s for flush, notice for bio toilet moulding:- duties of coach attendant, push, pull, no s moking, alarm and penalty notice, door closes automatically, safety message near gat e, notice for luggage capacity. lavatory:- dust bin, fire extinguisher, soap dispenser, n o drinking water, no waste into toilet, western style, press for flush, fire prevention and safety, marking of lavatories / body side door, notice for lavatories, drinking wat er, unified notice for fire prevention & safety. seat & berth:- sticker for seat number, b erth numbers, letter for chaining luggage, notice for unreserved coaches. air brake:- reset emergency brake, feed pipe, brake pipe, closed, open, hand brake panel : furnish pl ate, complaint book. window & ceiling: pull window glass inside, indication plate & stic ker for emergency window, emergency openable window the cardboard box shall carr y a qr code having details as listed below : 1 name of the manufacturer 2 purchase order number 3 purchase order date 4 unique serial number ( or lot number for bulk items) of the manufacturer or 5 date o f manufacture 6 delivery challan no. 7 delivery challan dat e the qr code shall be as per iso/iec18004 model2 and the data shall be av ailable as xml using the tags detailed above. incase the above details are not available , or the qr codes are not readable, the supplied material is liable to be rejected. [ warr anty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40539143

07 Jul, 2025 NA

Kapurthala - Punjab

Tender For supply of control panel for radiator fan motor of diesel engine for lhb power ca, a s per drawing: edts114,rev-b,am-1., packing instruction: alternator,rru, erru & accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polyt hene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thic k & should have support of at least 3 wooden battons of size 100x100mm of suitable le ngth to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suit able dimensions made out of wooden strips of 20x100mm size. gap between each strip sh ould not be more then 100mm. the material used for product packaging shall be eco-fri endly.a list should be pasted on each wooden cage showing order no, pl no, descriptio n of the item, drg. no/ spec. no ,qty, firm's name & address and date of despatch etc. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40538024

06 Jun, 2025 NA

Kota - Rajasthan

Tender For 40 vmax xgt bl aft cordless 13 mm (1/2?) 125 n.m drilling machine suitable for carbide dri ll bit 1 -13 mm with standard accessories and additional accessories . inspection consignee make ? bosch , makita ,de walt or similar (note:- 1.mateiral required is company original packing. 2.proof required along w ith supply material procure from oem. ) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40523361

18 Jun, 2025 88.98 Lacs

Chennai - Tamil Nadu

Tender For providing of custom bid for services - custom bid for services - schedule a washing of turkey bath towel hand towel steam pressing packing in a paper cover with all contractors material machinery tools and plant etc complete and as directed by the engineerincharg..,custom bid for services - custom bid for services - schedule b dry cleaning of window curtains steam pressing with conctractors material machinery tools transportation etc caring of accessories used for hanging curtains and if damaged the contractor ..,custom bid for services - custom bid for services - schedule c washing of hand towel steam pressing packing in a paper cover with all contractors material machinery tools and plant etc complete and as directed by the engineerincharge per unit means o..,custom bid for services - custom bid for services - schedule d deployment of supervisor for upkeeping work in cao office complex 2nos watch ward for office opening and closing 2 nos,custom bid for services - custom bid for services - schedule e providing unskilled

Central Government/Public Sector

CTN :40434891

19 Jun, 2025 NA

Madurai - Tamil Nadu

Tender For nylon 66 insulation for 'd' bracket set for irs point machine as per irs type point machine as per spec no.irs-40-84 or latest one set consisting of: 1) insulating plate (rh) as per drg. n o. s3265-1 no, 2)insulating plate (lh) as per drg no. s-3266-1 no, 3)insulating bush as per drg no.s-23199- 4 nos & insulating washers as per drg no.s-8640- 4 nos. accecptable make: similar, (material should supply with secured packing condition). [ warranty period: 30 months after the date of d elivery ]

Packing Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors