Latest paint booth scrap Tenders | Government paint booth scrap Tenders

corporations/Associations/Others

CTN :41106206

24 Jul, 2025 23.42 Lacs

Chandigarh - Chandigarh

Tender For supply and fixing of open air gym and gymnastic equipments in green belt and various parks of sector 34,35 and 43,,chandigarh under ward development fund - supply & fixing of sur board functions: by swinging both legs together from side to side the surfing board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through core activation approaches: stand on the pedals and grasp the handles with both hands, swing from left to right. size:-1020x800x1480 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel footrest / foot paddle for long lasting life, supply & fixing of space walker space walker complete in all respect having following specifications1. all pipes should used in the equipment should be galvanized with 3 mm thinness 2. multi coulor powder coating with polyester paint should be used on all the equipments 3. the foot padel on all the equipments should be aluminum only4. the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 all alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no. less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 the minimum height of the edge of the swing components is no.t less than 80 mm 11 hazardous materials like coating agent, rubber are under national newest standard.12 reduce of edge is no. less than 3.0 mm13 the diameter is roating shaft is no.t less than 40 mm functions the leg & thigh exerciser provides excellent cardiovascular exercise while developing the leg muscles. allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. suitable for all ages. , supply and fixing of seated pedal trainer leg shaper complete in all respects having following specifications.all pipes should used in the equipments should be galvanised with 3mm thickness.multi colour powder coating with polyster paints should be used on all the equipments.the foot pedal on all the equipments should be of aluminium only.the seats should be made of high quality plastic with colour scheme in yellow or orange.the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 all alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no. less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no. less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages., supply and fixing of wa

CTN :40808350

24 Jul, 2025 13.22 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : requirement of safety, rescue & security items for ssctps fy 2025-26,suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap , gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch) , barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5 , chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160 , acid/ alkali proof gloves having size of 18 inch with palm m , normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton , fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics , safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white , safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green , impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003 , foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592 , carry sheet (stretcher) l x b: 212 x 75 cm with self weight 1 kg, load limit 159 kg, lift type: horizontal , wind indicator made of light weight pu coated nylon material. double stitch at all joints. , plastic eyelets gives anticorrosion proper-ties. the complete wind sock comes with a polymer packing. 2" dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe. , ear plugs corded epsav-570 , nose/ dust mask rpsav-p2 , flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164 , vapour respirator with head stripes to accommodate twin cartridges with exhalation valve , safety net consisting of pp rope dia: 4mm, mesh size: 100 mm, outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr , ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a) , heat shield hand gloves made of normal and tannedsplit leather of reddish-brown colour. , insulating thermalbarrier as inner layer gives heat protection upto 250 degrees. thumb re-inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344 , insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991 , electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991 , hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350c temperature.it should be atira tested for 250c splash, tested to iso 5025,9151,6942,9185 and en 1875-3 , chemical splash goggles with indirect ventilation, protect against splash and a hard-coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003 , chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003 , elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv , chemiflex latex gloves, length

CTN :41119181

07 Aug, 2025 NA

Liluah - West Bengal

Tender For supply of set of packing for pipe fittings bracket as per sk. no. llh-41/98 alt. 4 with powder coating m inimum thickness 50 micron. colour- grey/ cool blue. item no. 1=3600 nos./set, item no-2= 300 nos./set, it em no.3= 300 nos./set item no.4 =300 nos. / set [ warranty period: 30 months after the date of delivery ]

CTN :41043092

28 Jul, 2025 5.88 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of ground in sathyan nagar estate ward in nemom lac, thiruvananthapuram - supply and installation of outdoor gym equipment - gym equipments (18% gst), od40855/2025-2026 : horse rider - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap -dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is madeby 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp /nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing., od40856/2025-2026 : back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od b g.i pipe. seat rest pipe 42 mm od b class g.i pipe. handle pipe 33 mm od b class g.i pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 3 mm thick used to support it. footrest pipe 42 mm od b class g.i pipe and 80 x 40 mm ms rectangular pipe. closing cap pp / nylon / hdpe material. seat 360 x 300 x 2 mm thick m.s. seat with corner fillet for safety. grips - high quality rubber 46 mm od. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing, od40857/2025-2026 : sky walker - supply and installation of sky walker having the following specifications: dimensions: (l x w x h) 1720 x 910 x 1700 mm. main frame - made of 88 mm od b class gi pipe dually bending design. foundation plate m.s. round plate of 250 mm & 8 mm thick. paddle vertical support - 42 mm od b class gi pipe. handle - 33 mm od b class gi pipe dually bending design. leg movement frame 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use for to support it. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm m.s pipe. and top support of m.s. round plate of 250 mm &a

CTN :40821460

24 Jul, 2025 NA

Multi City - Rajasthan

Tender For corrigendum : requirement of safety, rescue and security items for ssctps fy 2025-26, suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap, gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch), barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5, chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160, acid/ alkali proof gloves having size of 18 inch with palm m, normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton, fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics, safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white, safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green, impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003, foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592, carry sheet ( stretcher)l x b: 212 x 75 cm with self weight 1 kg , load limit 159 kg , lift type: horizontal, wind indicator made of light weight pu coated nylon material. double stitch at all joints. plastic eyelets gives anticorrosion proper ties. the complete wind sock comes with a polymer packing. 2 dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe., ear plugs corded epsav-570, nose/ dust mask rpsav -p2, flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164, vapour respirator with head stripes to accommodate twin cartridges with exhalation valve, safety net consisting of pp rope dia: 4mm, mesh size: 100 mm,outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr, ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a), heat shield hand gloves made of normal and tannedsplit leather of reddish brown colour. insulating thermalbarrier as inner layer gives heat protection upto 250 degrees.thumb re inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344, insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991, electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991, hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350 c temperature.it should be atira tested for 250 c splash, tested to iso 5025,9151,6942,9185 and en 1875-3, chemical splash goggles with indirect ventilation, protect against splash and a hard coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003, chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003, elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv, chemiflex latex gloves, length-300 mm, en size- l coating m

Central Government / Public Sector

CTN :41119093

18 Aug, 2025 NA

Multi City - Multi State

Tender For design print and supply of model layout of shops on rewriting white board with aluminium frame of size 3feet x 4 feet along w ith foldable tripod ( 3 legs) of 1 inch ms square pipe of 1.5 mm thick 6ft height black colour powder coating note: one sample to be got a pproved before bulk supply. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40969867

21 Jul, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : entering into rate contract for 1 year for subcontracting of powder coating

State Government

CTN :41031091

25 Jul, 2025 3.12 Lacs

Ropar - Punjab

Tender For purchase of football equipment - purchase of football equipment, football 4 no.pu) poly uritheen material international match standard (fifa,aiff) approved, football 5 no.pu) poly uritheen material international match standard (fifa,aiff) approved, goal post 11 x 115 inches circumference made of iron with height 2.44 meter and width 7.32 meters with white powder coating paint & wheel mounted portable., goal post 9 x 93 inches circumference made of iron with height 2.1 meter width 4.8 meter with white powder coating paint & wheel mounted portable., goal post 7 x 73 inches circumference made of iron with height 1.6 meters & width 3.6 meter with white powder coating paint & wheel mounted portable., shotting board woodenas per standard specification

corporations/Associations/Others

CTN :41014048

18 Jul, 2025 NA

Kolkata - West Bengal

Tender For instalatiopn of open air-gym equipment at ashapurna devi smriti uddyan at ward no-110 - supply and installation of pull chair dual/dual pull chair with necessary concreting work and cutting existing chequered tile pavement and resetting the same if necessary. specifications:material-galvanised steel pipe, cleaned by sand blasting, then coated with phosphatesolution and finished with electrostatic powder coating or other similaravailable material meeting the required standard.anti rust-shot blast/ grit blasting of equipment to clean the rust; electrostaticpower coating technique to process the surface.base cover made from virgin -lldpe with any protection to infiltration of ultravioletray, possessing weather resistant property.all pipes are powder coated 80-120 microns thick akzonobel paintsplatforms-high strength punching plate with wavy and slip resistant surface.base plate- minimum 12mm thick mild steel.fasteners-stainless steel screws to be used and at the contact point with thecolumns, rubber pads are to be used. screw tops to be covered with plastic caps.suitable for user weight upto 150kgpipe covers-pipe ends covered with aluminium end.dimensions (lxwxh): 2300 x 700 x 2100 mm, supply and installation of leg press dual/ dual leg press station with necessary concreting work and cutting existing chequered tile pavement and resetting the same if necessary. specifications:material-galvanised steel pipe, cleaned by sand blasting, then coated with phosphatesolution and finished with electrostatic powder coating or other similaravailable material meeting the required standard.anti rust-shot blast/ grit blasting of equipment to clean the rust; electrostaticpower coating technique to process the surface.base cover made from virgin -lldpe with any protection to infiltration of ultravioletray, possessing weather resistant property.uv-fully resistantall pipes are powder coated 80-120 microns thick akzonobel paintsplatforms-high strength punching plate with wavy and slip resistant surface.base plate- minimum 12mm thick mild steel.fasteners-stainless steel screws to be used and at the contact point with thecolumns, rubber pads are to be used. screw tops to be covered with plastic caps.suitable for user weight upto 150kgpipe covers-pipe ends covered with aluminium end.dimensions (lxwxh): 2300 x 500 x 1900 mm, supply and installation of air walker/air walker station with necessary concreting work and cutting existing chequered tile pavement and resetting the same if necessary. specifications:material-galvanised steel pipe, cleaned by sand blasting, then coated with phosphatesolution and finished with electrostatic powder coating or other similaravailable material meeting the required standard.anti rust-shot blast/ grit blasting of equipment to clean the rust; electrostaticpower coating technique to process the surface.base cover made from virgin -lldpe with any protection to infiltration of ultravioletray, possessing weather resistant property.uv-fully resistantall pipes are powder coated 80-120 microns thick akzonobel paintsplatforms-high strength punching plate with wavy and slip resistant surface.base plate- minimum 12mm thick mild steel.fasteners-stainless steel screws to be used and at the contact point with thecolumns, rubber pads are to be used. screw tops to be covered with plastic caps.suitable for user weight upto 150kgpipe covers-pipe ends covered with aluminium end.dimensions (lxwxh): 1100 x 550 x 1300mm, supply and installation of rower/rowing machine with necessary concreting work and cutting existing chequered tile pavement and resetting the same if necessary. specifications:material-galvanised steel pipe, cleaned by sand blasting, then coated with phosphatesolution and finished with electrostatic powder coating or other similaravailable material meeting the required standard.anti rust-shot blast/ grit blasting of equipment to clean the rust; electrostaticpower coating technique to process the surface.base cover made from

CTN :41003419

18 Jul, 2025 NA

Darjeeling - West Bengal

Tender For supply of puf insulated ds orl puf insulated prefab modular shelter of size 18 point 90 x 6 point 10m including 1 point 38m wide verandah all as per brief specification , tmt bar fe 550 grade 12mm dia , tmt bar fe 550 grade 10mm dia , tmt bar fe 550 grade 8mm dia , binding wire annealed not less than 0 point 9mm dia , double sleeping bunks 1900 mm x 762 mm x and height 1650 mm made of 40 x 40 mm medium grade square tube with 25 x 25 mm as per tech specs , double leaf steel lockers half hanging and half shelving will be height 1500x width 900 x depth 475mm as per tech specs , pvc laminated sheet flooring 2 mm thick , vitrified tiles 600x600x10 mm , white cement as per tech specs , water proofing compound , quick setting compound as per tech specs , powder coated curtain rod colour brown and ivory length 6 mtr , curtain rod bracket colour brown or ivory , office chair with complete cushion and rubber hand rest frame made with ms hollow section pipe 20mm dia size of chair 915mm x 450mm , steel writing table shall have size of 0 point 90m x 0 point 60 m and height 0point 75m with prelaminated bhutan board top of 18 mm thickness as per tech specs , water dispencer of 15 ltr capacity single phase 230 v 50 hz as per tech specs , hdpe aristo wheel garbage waste dust bin 120ltr capacity size 920mmx480mmx550mm , looking mirror 1200 mm x 600 mm with 5 point 5 mm thick float mirror fixed on wooden frame and 6 mm thick plywood back support , fire proof coating paint for panel poly urethane paint top coat , fire proof coating paint for wood top coat , fire extinguisher a b c type portable net 2 kg capacity cylindrical with discharge pipe and nozzle complete and suitable bucket for hanging on wall , switch piano moduler type 10 amp one way cat part no 21011 , switch piano moduler type 10 amp two way cat part no 21022 , bell push moduler type 5 amps cat part no 21044 , switch piano moduler type 15 amp one way cat part no 21066 , socket 10 a modular type catpart no 21113 , socket multipurpose 3 pin 10 and 3 pin 20 amp modular type of 2 module cat part no 30828 , tape insulation 10 mtr long , decorative type ultra slim linear led lighting fixture with extruded polycarbonate energy efficient led tube light fitting 18 watt as per tech specs , decorative wall light fitting 10 watt made up of polycarbonate suitable for 10 w retrofit led bulbspirl b 22 base as per tech specs , led security light as per tech specs , mirror led ligt 9 watt up and down type , elect bell ding dong , surface plastic box suitable for moduler switches and socket of 4 module , surface plastic box suitable for moduler switches and socket of 3 module , surface plastic box suitable for moduler switches and socket of 2 module , solid plate with base frame suitable for surface plastic box of 4 module , solid plate with base frame suitable for surface plastic box of 3 module , solid plate with base frame suitable for surface plastic box of 2 module , blank plate of single module , pvc casing capping 1 inch length 6 ft , pvc elbow for casing capping of size 1inch length 6 ft , pvc tee for casing capping of size 1 inch , ceiling rose pvc , pvc round block , steel screw full threaded 1 by 2inch 100 nos , steel screw full threaded screw 1inch 100 nos , steel screw full threaded screw 1 by 4 inch 100 nos , mcb db 12 way 240 volt double door complete with copper busbar , mcb 6 amp sp 240 volts c curve , mcb 20 amp 240 volt c curve sp , mcb double pole isolater 63 amp 240 volt , pvc cable insulated aluminium conductor served with inner sheathing of pvc tape overall pvc sheathed cross sectional area 10 sqmm 2 core as per tech specs , pvc 1 point 5 sqmm copper cable single core frls with multistrand , pvc 1 point 5 sqmm copper cable single core frls multistrandedconductor for earth wire in green colour , pvc insulated and pvc sheathed multistranded copper conductor flexible industrial cable 1100 volts three core 1 point 0 sqmm , pvc 2 point 5 sqmm copper cable single core frls multstanded

Paint Booth Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others