Latest paint coating Tenders | Government paint coating Tenders

Corporations And Associations And Others

CTN :43514578

16 Jan, 2026 33.81 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipments and construction of epdm flooring under open gym equipment in shahdara south zone, under mplads funds for various locations of parks in municipal corporation of delhi. - supply and installation of open gym equipments and construction of epdm flooring under open gym equipment in shahdara south zone, under mplads funds for various locations of parks in municipal corporation of delhi., seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)., cross trainer /elliptical exerciser dimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel

CTN :43520127

22 Jan, 2026 NA

Chandigarh - Chandigarh

Tender For supply of corrision preventive cum cleaning spray 500ml , electro shape slvent , plastic kote cum formal coating 350ml , varnish colourless

CTN :43529775

31 Jan, 2026 NA

Pune - Maharashtra

Tender For supply of gym equipment and other associated fitment items c c -treadmill , elliptical cross trainer , spin bike , air rower , lat pull down row , seated chest press , shoulder press , seated calf machine , 45 degree leg press , half rack , leg curl extension , olympic incline bench , olympic decline bench , olympic flat bench , power sled , adjustable bench , abductor or adductor , dumbbell rack , rubber round dumbbell 2. 5 kg , rubber round dumbbell 05 kg , rubber round dumbbell 7. 5 kg , rubber round dumbbell 10 kg , rubber round dumbbell 12. 5kg , rubber round dumbbell 15 kg , rubber round dumbbell 17. 5kg , rubber round dumbbell 20 kg , rubber round dumbbell 22. 5kg , rubber round dumbbell 25kg , rubber round dumbbell 27. 5kg , rubber round dumbbell 30 kg , maxim black rubber coated plate 2. 5 kg , flex colour rubber bumper plate 5 kg , flex colour rubber bumper plate 10 kg , flex colour rubber bumper plate 15 kg , flex colour rubber bumper plate 20 kg , flex colour rubber bumper plate 25 kg , weight plate tree , 7ft olympic barbell , 4ft straight olympic barbell , 4ft curl olympic barbell , hammer multi grip bar , deadlift hex trap shrug barbell , barbell holder 9 pieces , skipping rope , balance board , latex resistance bands-m , latex resistance bands-l , bosu ball with plastic base , laying power cable for electrically powered equipment a , provision of cabling work for hvac units , hanging and linear fixtures , concealed and surface fixtures , power control and distribution units , db box with circuit breakers , powder coating on structural members , branding on walls , signages for equipment usage guidelines , 8ft height single glazed partition , single leaf glass door with hardware , 6 mm new mirror with installation on ply paneling , 18mm ply framing with 12 mm ply base for mirror paneling , partition work above glass partition , acp paneling at entrance , 20 mm rubber flooring roll in gym , 6mm specialised spc flooring in studio

corporations/Associations/Others

CTN :43480599

14 Jan, 2026 3.02 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym and pcc benches in parks near house no.2870/2 sector 49-d,chandigarh under mplads. work no.114 18th ls. - push chair odf 001functions: developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc.approaches sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. revert slowly.size:-2265x662x2010 mm material: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel seats for long lasting lifeprovision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, surf board by swinging both legs together from side to side the surfing board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through core activation approaches: stand on the pedals and grasp the handles with both hands, swing from left to right. size:-1020x800x1480 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, streel footrest/foot paddle for long lasting life.provision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, space walker .space walker complete in all respects having following specifications.all pipes should used in the equipments should be galvanised with 3mm thickness.multi colour powder coating with polyster paints should be used on all the equipments.the foot pedal on all the equipments should be of aluminium only.the seats should be made of high quality plastic with colour scheme in yellow or orange.the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1100*460*1480mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-38*3mm steel pipe5 there is restrainer inside, swing lever is not more than 65degrees and having swing rod is made of 3mm steel tube.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts, the resistance index is greater than 0.5mm8 the distance between two pedals of the adjacent motion is no less than 100mm.9 anti theft cover is made by stainless steel/high quality plastic10 the minimum height of the edge of swing component is not less than 80mm11 hazardous materials like coating agent, rubber are under national newest standard.12 radius of edge is no less than 3.0 mm.13 the diameter of rotating shaft is not less than40mmfunctions: the leg & thigh exerciser provides excellent cardiovascular exercise while developing the leg muscles. allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. suitable for all ages. approaches: hold the crossbeam with both hands and swing your legs backwards and forwards in a walking motion.provision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, seated pedal trainer leg shaper complete in all respects having following specifications.all pipes should used in the equipments should be galvanised with 3mm thickness.multi colour powder coating with polyster paints should be used on all the equipments.the foot pedal on all the equipments should be of aluminium only.the seats should be made of high quality plastic with colour scheme in yellow or orange.the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730

corporations/Associations/Others

CTN :43461971

13 Jan, 2026 3.03 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in garden of annual part i of sector 44 chandigarh under wdf - providing & fixing of push chair functions: developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc.approaches sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. revert slowly.size:-2265x662x2010 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel seats for long lasting life. the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge., providing & fixing of sur board functions: by swinging both legs together from side to side the surfing board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through core activation approaches: stand on the pedals and grasp the handles with both hands, swing from left to right. size:-1020x800x1480 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel footrest / foot paddle for long lasting life.the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge., providing and fixing of space walker .space walker complete in all respects having following specifications.6. all pipes should used in the equipments should be galvanised with 3mm thickness.7. multi colour powder coating with polyster paints should be used on all the equipments.8. the foot pedal on all the equipments should be of aluminium only.9. the seats should be made of high quality plastic with colour scheme in yellow or orange.10. the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1100*460*1480mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-38*3mm steel pipe5 there is restrainer inside, swing lever is no.t more than 65degrees and having swing rod is made of 3mm steel tube.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts, the resistance index is greater than 0.5mm8 the distance between two pedals of the adjacent motion is no. less than 100mm.9 anti theft cover is made by stainless steel/high quality plastic10 the minimum height of the edge of swing component is no.t less than 80mm11 hazardous materials like coating agent, rubber are under national newest standard.12 radius of edge is no. less than 3.0 mm.13 the diameter of rotating shaft is no.t less than40mmfunctions: the leg & thigh exerciser provides excellent cardiovascular exercise while developing the leg muscles. allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. suitable for all ages. the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge, providing and fixing of seated pedal trainer leg shaper complete in all respects having following specifications.6. all pipes should used in the equipments should be galvanised with 3mm thickness.7. multi colour powder coating with polyster paints should be used on all the equipments.8. the foot pedal on all the equipments should be of aluminium only.9. the seats should be made of high quality plastic with colour scheme in yellow or orange.10. the high en

CTN :43502058

19 Jan, 2026 NA

Mumbai - Maharashtra

Tender For supply of stationery items d d -ruled book 4qr , ruled book 3 qr , ruled book 2 qr , ruled book 1 qr , envelops se5 plain type i 105 x 230 mm , ev se 5 p s cloth lined 105 x 230 cm , envelope se 7 cl 229 x 324 mm , envelops se 8 a cl 324 x 458 mm , envelope cloth coated a4 size , scribbling pad 50 sheets , self stick pad 100 sheets , plain photo copier a4 80 gsm , pencil black lead ordinary , ball point pen for non gazetted , pins in packets of 100 gms , gum liquid 150 ml , glue stick synthetic 15 gms , gum paste white , stapler machine no 10 , staple pins machine no 24 , stapler machine no 24 , staple pins machine no 10 , paper clip gem pattern plastic coated , highlighter pen in assorted colour green orange pink fluorescent yellow , white board marker pen , file channel a4 size , punching machine double , punching machine big size 600 , eraser , sketch pen , cello tape 24 mm x 20 meters , cello tape 12 mm x 10 meters , cello tape 24 mm x 25 meters , plastic folder 35 point 5 x 25 point 5 cm , gel pen add gel pen , permanent marker pen , scale plastic 12 inch , file divider , dak register , paper flags 4 colours , brown cover roll with plastic coating , box file , cd mailer , plastic folder legal size with steel clip assorted colours , brown packing tape 2 inch , parker pen , uniball gel pen , sharpener , paper binder big size , paper binder clip medium , plastic ring file legal size ) /bid number : gem/2026/b/7089535 * /dated: 08-01-2026 & & / bid document 1 / 35

Central Government/Public Sector

CTN :43502370

22 Jan, 2026 NA

Parganas - West Bengal

Tender For tender for supply of supply of 05 types of stationary items - 0.9 mm. pure copper wire annealed. diameter_ 0.9 mm. bare / without enamel coating. , plastic bottle 1/2 ltr. capacity. shape_ barrel. plastic colour_ white and semi-transparent. with plastic sealed cap and plastic threaded lid. bottle capacity (in ml.)_ 500. pack size_ 06 nos. / packet. , tar paper tar paper / bituminised waterproof paper. size_ 44 width x 90 mtr. length (approx.) for each roll. paper colour_ brown. inlay bitumen layer should be of good quality. paper for masking purpose using bitumen paper (is_1398 , type1) .thickness of the tar paper is minimum 120 gsm. , waterproof emery paper grit 180. sheet size_ 230 x 280 mm. grit size_ 180. pack size_ 50 nos. / packet. make_ jawan brand of carborundum universal limited (cumi). , plastic bubble sheet. pack size_ 100 mtr. / roll. sheet size_ 1 mtr. x 100 mtr. roll of weight 12 kg.(plus minus) 0.5 kg , plastic bubble sheet. pack size_ 100 mtr. / roll. sheet size_ 1 mtr. x 100 mtr. roll of weight 12 kg.(plus minus) 0.5 kg , plastic bubble sheet. pack size_ 100 mtr. / roll. sheet size_ 1 mtr. x 100 mtr. roll of weight 12 kg.(plus minus ) 0.5 kg

CTN :43487632

28 Jan, 2026 17.98 Lacs

Kolkata - West Bengal

Tender For supply of pushable 0 point 018 inch pushable 0 point 018inch coils 36mm , polyvinyl alcohol particles 150 250 microns , polyvinyl alcohol particles 350-500 microns. , polyvinyl alcohol particles 250-350 microns , biliary self expanding metallic stents size 10mm into 8 cm uncovered , drug eluting beads for hepatic tumor embolisation , ptbd internal external drainage catheters , pcn dilator set , mustang peripheral balloon dilatation catheter 5mm 12mm assorted sizes , microcatheter for peripheral vascular intervention with hydrophilic coating and accepting 0 point 018 inch coils , biliary self expanding metallic stents size 10mm into 10 cm , kampi angiography catheter 40 to 65 cm length, 4 or 5 fr permitting 0 point035 inch gw , pushable fibre embolization coils 0 point 035 inch 2 slace 3 slace 4 slace 5mm diameter into 2 cm or longer , pushable fibre embolization coils 0 pont 035 inch 6 slace 7 slace 8 mm diameter into 3 cm or longer , pta large balloon catheter for peripheral vascular interventions 14 24mm diameter into 40mm or more , dj stent 6fr 26cm length , micropuncture set 4 slace5 f , hydrophilic with m coat or equivalent angiography glide catheter with less lubricity on proximal shaft , hydrophilic with m coat or equivalent angiography glide catheter with less , pigtail catheter assorted sizes , nitrile non sterile gloves medium m , inj polidocanol 3 percentage 60mg slace2ml , three way stop cock plastic , syringe 10ml luer lock , disposable primary angiography kit consisting , liquid lipidol as diluent for nbca 10ml ) /bid number: gem/2025/b/6980882 * /dated: 07-01-2026 & & / bid document1 / 27

CTN :43466004

16 Jan, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of surface protection paint coating aluminium , thinner for polymide paint

CTN :43466028

16 Jan, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of catalyst rock hard , surface protection paint coating (clear)

Paint Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector