Latest painting booth Tenders | Government painting booth Tenders

corporations/Associations/Others

CTN :40003034

17 Apr, 2025 13.79 Lacs

Multi City - Andhra Pradesh

Tender For supply of gym equipment of chennupati ramakotaiah indoor stadium in 11th division. 1st call general funds - "providing and fixing of gym rubber mat flooring tiles of size of 500 x 500 mm and thickness of 15 mm,interlocking type of vulcanized virgin rubber of design and colour and with excellent impact bearing, tough on falling weights, protection to sub floor, sound absorbing & highly durable complete as per directions of engineer - in -charge. make - ecoflex, bioflex, fitflex or equivalent. including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities. ", "providing hack squat machinestructure and frames: structural frames are fabricated from 100 x 50 x 2.5mm thick square steel tubing. heavy metal bending design is used to ensure superior strength and to eliminate joint failure. weight stack: m.s weight stack; having 7.5 kg each plate weight fitted with 2 nylon bushes to avoid noiseless operations. guides: stainless steel guide rods of 25mm thick is used. bearings: lubricated high grade 'zz' steel ball bearing. selector pins: magnetic selector pins; made up of high quality steel 10mm with spring wire mechanism and nylon knob. cables: 6mm nylon air craft cables are used. pulley: pulleys made up of high quality nylon with deep grooved to support cable and double 'zz' bearing with m10 pin ensures superior strength and longevity.cushion / padding: seats cushion and pads are made up of 2"" high density foam and 18mm marine plywood is used for greater life and finally covered with heavy vinyl.hardware: hardware used are button head bolts and made up of high tensile steel.powder coating: all components are chemically treated to seal exterior and interior surfaces against corrosion. the components are electro statically powder coated at minimum 60-70-micron thickness to make it resistant to scratch, corrosion and humidity. closing caps: all open ends are covered with nylon/pp closing caps.handgrips: hand grips is used on handles wherever necessary made up of high quality rubber. foot pad: high quality rubber foot pad. digital repetition counter for each exercise/workout sets. including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities. ", providing multi adjustable bench structure and frames: structural frames are fabricated from 100 x 50 x 2.5mm thick square steel tubing. heavy metal bending design is used to ensure superior strength and to eliminate joint failure. selector pins: magnetic selector pins; made up of high quality steel 10mm with spring wire mechanism and nylon knob. cushion/padding:seats cushion and pads are made up of 2" high density foam and 18mm marine plywood is used for greater life and finally covered with heavy vinyl. hardware: hardware used are button head bolts and made up of high tensile steel. powder coating: all components are chemically treated to seal exterior and interior surfaces against corrosion. the components are electro statically powder coated at minimum 60-70-micron thickness to make it resistant to scratch, corrosion and humidity. closing caps: all open ends are covered with nylon/pp closing caps. foot pad: high quality rubber foot pad. including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities. , providing flat bench structure and frames: structural frames are fabricated from 100 x 50 x 2.5mm thick square steel tubing. heavy metal bending design is used to ensure superior strength and to eliminate joint failure cushion / padding: seats cushion and pads are made up of 2" high density foam and 18mm marine plywood is used for greater life and finally covered with heavy vinyl. hardware: hardware used are button head bolts and made up of high tensile steel. powder coating: all components are chemically treated to seal exterior and interior surfaces against corrosion. the components are electro statically

CTN :40014029

24 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For 117 procurement powder coating equipments and installation at tansi units

CTN :39992210

15 Apr, 2025 8.31 Lacs

Guntur - Andhra Pradesh

Tender For supply & delivery of leaks arresting materials in gorantla and nagaralu area div no.46,47 & 48 under guntur municipal corporation. - 200mm dia class 15 cid joints, 160mm dia class 15 cid joints, 100mm dia class 15 cid joints, 80mm dia class 15 cid joints, supply and delivery of 6mm thick rubber packing including taxes and conveyance etc complete as per ss, supply and delivery of bolts and nuts (1/2" to 1") including taxes and conveyance etc., complete, manufacture, supply and delivery of the following hdpe pipe and spl of approved by the departmental authorities and including cost and conveyance of all materials and all type of labour charges for fabrication, painting etc., complete., 160 mm dia hdpe pipe , 110 mm dia hdpe pipe , 90 mm dia hdpe pipe , manufacture, supply and delivery of hdpe specials including tranportation to anywhere in ap excluding excise duty sales tax and specials etc. complete , a) 160mm dia hdpe pipe end long necks, b) 160mm dia ms flanges , c) 160mm dia hdpe dummy , manufacture, supply and delivery of the following pvc pipe and spl of approved by the departmental authorities and including cost and conveyance of all materials and all type of labour charges for fabrication, painting etc., complete., 200 mm dia pvc pipe , 75 mm dia pvc pipe, 90 mm dia pvc pipe, 80 mm dia pvc coupling, supply and delivery of "resilient seated soft sealing" gate valves (sluice valves) with body and bonnet of ductile iron ggg-40/sg-400/15 or ggg-50/sg-500/7 or equivalent as per is1865, is:3896-2 and wedge fully rubber lined with food grade quality grade w270 grade epdm, replaceable spindle nut without gland packing with 3-o ring protection system on the shaft and seals of nbr. the valves should be vacuum tight and 100% leak proof with face to face dimensions as bs:5163 type a/is:14846. all the valves should be with fusion bonded electrostatic powder coating both inside and outside (min 250 microns)-ral 5005 with pocket less straight through body passage conforming to design standards of din-3202f4/bs:5163 type a flange drilling as per is - 1538 excluding all taxes, duties and transportation., 100mm dia sluice valve , 150mm dia sluice valve 80mm dia sluice valve

CTN :40010593

19 Apr, 2025 NA

Mumbai - Maharashtra

Tender For quotations for dismentling of painting booth and assemble of painting booth

CTN :39993528

02 May, 2025 NA

Jodhpur - Rajasthan

Tender For custom bid for services - job work for preparation of functional filler materials, surface modification and paint formulation , custom bid for services - job work for study, design evaluation and certification requirements of special coatings to be applied on skin of airborne platform-1. preparation of microwave absorbing metal flakes powder , weighing and loading of raw metal powder in attritor mill along with steel balls and its operation , high energy milling of powder along with process control agent and regular monitoring during operation , i. , ii. , iii. , iv. , v. , weighing and packaging of powder in air tight container , vi. , vii. , un loading of powder from attritor mill on to trays and drying in room temperature , separation of powder from steel balls through sieving , regular cleaning of the machine and equipments related to above job works preparation of 5 kg of metal flakes per month , 2. surface modification of metal flakes powder , i. reaction for coating of oxide material on iron metal flakes , ii. , iii. , filtration and washing of powder , drying and packing of powder , 3. formulation of radar absorbing paint , i. , ii. , iii. , iv. , cleaning of bead mill by using solvent , modification of resin system by blending of different resins , formulation of paint by using filler material as per requirement , testing of drying time, flexibility, degree of fineness for quality check , 4. preparation of test specimen , i. cleaning of test panels (aluminium, mild steel and composites) , ii. , iii. , iv. , v. , primer application, followed by surface preparation through emery paper and solvent , application of radar absorbing paint to achieve desired thickness , prepare test panels of different sizes (100 mm x 100 mm) as per requirement application of polyurethane top coat , 5. other terms and conditions: , i. , ii. , iii. , iv. , v. , payment will be made on monthly basis after completion of job based on user job completion certificate , duration of job work: two years , the service provider should have prior experience of executing technical job work contracts in any of government department of r & d in government of india. copy of relevant supply order to be enclosed with the bid. , irrelevant supply orders pertaining to civil works, construction, security, maintenance and arboriculture will not be considered. , the contract may be extended further based on satisfactory services of service provider on same terms and conditions, if required by buyer. , this job work will be carried out at defence laboratory, jodhpur. , many shay , , scope of work , job work to study, design evaluation and certification requirements of special coatings to be applied on skin of airborne platform , (1) following scope of job work will be carried out under the supervision of rcma nashik , on monthly basis at rcma nashik. , i. , ii. , literature survey about latest and advance materials and technologies in the field of radar signature suppression of airborne targets , evolving the approach and strategies for airworthiness certification of special coating. iii. scrutiny of the airworthiness certification plan (acp), system requirements, , integration, technical specification etc. , iv. verification of the characterisation mythologies of special materials. , v. , verification and validation of process control documents and various design documents. vi. verification and validation of cfd analysis of aircraft with different flight regions. , vii. verification and validation of erosion, wear and tear analysis of coated airborne target. viii. scrutiny of documentation requirements for system level coating application and , subsequently flight evaluation. , ix. , study of rcs reduction after application of coatings by using simulation and modelling through matlab software. , (2) other terms and conditions: , i. , ii. , iii. , iv. , v. , payment will be made on monthly basis after completion of job based on user job completion certificate ,

Corporations And Associations And Others

CTN :39983897

16 Apr, 2025 92.5 Thousand

Bahadurgarh - Haryana

Tender For work for supply and installation of playing and open gym equipment in 2 nos. parks at near h. no.273 sector-10, bahadurgarh - app. item chest + shoulder combomain pipe 114mm od & 3.75mm thickness m/s round pipe handles made of 38mm x 31mm m/s round pipe with best quality rubber handle for hand grip working with rubber seal baring system and foot rest main pipe for 60 x 40mm m/s flat pipe size 6 feet rest 5.5 x 12 with base plastic cover all alloy cover with ss cover all m/s pipe best quality powder coating., app. item triple seated twistermain round pipe 114 mm od & 3.75 mm thickness m/s round pipe handle made of 31mm round pipe. round plastic twisting plate 11 bearing system twisting pipe 60 od round smoothly working with rubber bearing system 114mm pipe top s.s. cover plastic base cover and best quality powder coating., app. item double ab board bed made of 31mm round pipe and 20 x 40mm m/s flat pipe and joint with 114mm m/s round pipe with plastic base cover and best quality rubber handles with powder coating., app. item shoulder bilder main pipe 114 mm od & 3. 75mm thickness 17" round wheel made of 31 mm round pipe 25 mm round pipe with bearing system and s.s nut cover with plastic handle and u bend join with main 114 mm pipe for steering wheel is 48 mm od round pipe all alloy cover withs s cover best quality plastic handle on wheels &base fixed with nut bolt 8 mm m/s plate with plastic cover with best quality powder coating.

Corporations And Associations And Others

CTN :39983908

16 Apr, 2025 1.58 Lacs

Bahadurgarh - Haryana

Tender For work for supply and installation of playing and open gym equipment in 2 nos. parks at near h. no.273 sector-10 bahadurgarh and all other works contingent thereto with one year defect liability period free of cost - app. item leg press + surf boardmain round pipe 114 mm od & 3.75 mm thickness m/s round pipe seat made of m/s sheet 16gauge size of seat is 12"x12" fixed on 48 od round pipe smoothly working with rubber bearing system all alloy covered with s.s cover plastic base cover and best quality powder coating., app. item providing and fixing chain swing of size 10 long x 9 high (above ground) frame is made of m.s. pipe 2" b class which stay with m.s. pipe 1" b class frame is connected with m.s. road 25 mm dia shaft having fabricated ball bearing no. 3204 shaft, further having 2 no. seating belt type seat welded with 8mm thick m.s. complete with painting and fixed in cement concrete block of size 12" x 12" x 15" into 4 legs in mixing of ratio 1:2:4. complete in all respect of entire satisfaction of engineer-in-charge., app. item providing and fixing of slide 12 long x 16" wide x 5 high (above ground) slide is made of s.s. sheet 18 swg mounted on m.s. angle 40 x 40 x 4 mm slide 2 no vertical support of m.s. pipe 1" b class ladder having climbing steps of pipe 1/2 "b class complete with painting and to be fixed in cc blocks 12" x12" x15" in to 4 legs of mix in ratio 1:2:4.., app. item providing and fixing of setter sea -saw frame made of 2" dia ms pipe, 5" long and 1-6 height of ground level with 4 nos of sea-saw plunks with 1 " ms pipe, 8 long sheet made with 16 gauge painted with 1st quality paint and fixing with concrete block 1:2:4 ratio., app. item supply and installation of garden bench chair type garden bench with l-shaped sides made of reinforced concrete (m30), thickness 100 mm, overall height 1000 mm, base width 620 mm. back and seat shall consist of 5 nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. seating height of the bench shall be 450 mm. the bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. all materials required to be as per bis specifications.

Central Government/Public Sector

CTN :39982907

19 Apr, 2025 NA

Hyderabad - Telangana

Tender For fabrication, machining and powder coating of ss straight enclosures as per bhel drawings and specifications

Central Government / Public Sector

CTN :39572562

15 Apr, 2025 NA

Nashik - Maharashtra

Tender For corrigendum : supply of painting booth and painting equipments - booth size(length-21 m, width- 7.5 m, height- 7.5 m) , painting booth and painting equipments -booth size(length-15 m, width- 5.0 m, height- 5.0 m)

Central Government/Public Sector

CTN :39930917

15 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : procurement of furniture items for 22040 and 22043 - l-shaped executive office table.(a) approx. indicative dimensions:w-2000 x d-1400 -900 x h 750mm (b) table top: min. 25 mmthick made of prelaminatedparticle board (c) body: min. 18mm thick and made of prelaminated particle board (d)drawers: (i) min.03 drawers withcentre lock on top (ii) 01 shuttercompartment with lock (iii) 01open shelf. (e) wire managementto be provided item shall bedelivered at admin block of shiprepair complex inside hindustanshipyard limited. supplier shall a, rectangular executive officetable (a) approx. indicativedimensions: w-1500 x d-750xh-750 mm (b) table top: min. 18mm thick and suitable understructure (c) drawers: 3 drawerswith lock on top drawer. (d) wiremanagement to be provided. (e)leveller to be provided for easyadjustment in case of unevenfloor surfaces item shall bedelivered admin block of shiprepair complex inside hindustanshipyard limited. supplier shallassemble the supplied item atlocation as specified by userdepartment, rectangular 4 seater virginhdpe dining table with steelfoldable legs. (a) approx.dimensions: d-750 x w-1500x h-750 mm (b) max. weightwithstand capacity: 100 kgs (c)design: double layered foldable5 foot table (d) material: durablehdpe top & steel legs (e)welding: stud welding & capedbolts for safety (f) mechanism:rust free lock mechanism (g)portability: the table shall beportable and easy to assembleitem shall be delivered adminblock of ship repair complexinside hindustan shi, 2 seater hdpe dining table withsteel foldable legs (a) approx.dimensions: d-450 x w-750 xh-750 mm (b) max. weightwithstand capacity: 75 kgs (c)design: double layered foldable5 foot table (d) material: durablehdpe top & steel legs (e)welding: stud welding & capedbolts for safety (f) mechanism:rust free lock mechanism (g)portability: the table shall beportable and easy to assembleitem shall be delivered adminblock of ship repair complexinside hindustan shipyardlimited. supplie, high back executive officerevolving type chair (a)approximate indicativedimensions: w- 450 mm x d-700mm x h 1150/1250 mm (b) pucushioned seat and back (c) softpu covered arms (d) adjustableseat height mechanism (e)centre tilt mechanism (f) nylonstar base (g) twin wheel nylon, executive mid back revolvingtype office chairs (a) fixed pparm rest (b) push backmechanism (c) adjustable seatheight mechanism (d) smoothand durable nylon casters foreffortless mobility. item shall bedelivered admin block of shiprepair complex inside hindustanshipyard limited. supplier shallassemble the supplied item atlocation as specified by userdepartment., office visitor chair non revolvingtype (a) approx. dimensions:d-450 x w-450 x h-850 (b) framematerial: alloy steel (c) frame: 25mm round with 14 guagethickness (d) finish: black framewith powder coating (e) colour:maroon fabric on seat and & backwith 40 to 45 mm thicknesscushion with good density. itemshall be delivered admin block ofship repair complex insidehindustan shipyard limited.supplier shall assemble thesupplied item at location asspecified by user department, dining chairs with handle: (a)approx. dimensions: d-550 xw-600 x h 850 mm (b) material:poly propylene, robust anddurable item shall be deliveredadmin block of ship repaircomplex inside hindustanshipyard limited. supplier shallassemble the supplied item atlocation as specified by userdepartment

Painting Booth Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Corporations And Associations And Others

Corporations And Associations And Others

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector