Latest paints Tenders | Government paints Tenders

Central Government/Public Sector

CTN :43592450

20 Jan, 2026 NA

Chennai - Tamil Nadu

Tender For supply and application of one rake set epoxy pu paints for ac-ac emu rake (12 car formation) coaches (drg no.(790) emu/us/dmc/ac-8-3-001),alt nil. as detailed below : 1.adhesion promoting primer (app) as per -mdts-48279-rev-04,amd-01-840 ltrs. 2.two component p.u surfacer to specification rdso/m&c/pcn/100/2018, chapter-iv -360 ltrs. 3.pu thinner compatible with pu paint system offered -20 ltrs 4.thinner compatible for unsaturated polyster base kniffing putty,p.u surfacer and p.u gloss enamel finishing paint to specification rdso/m&c/pcn/100/2018, chapter-iii,iv,v-480 ltrs. 5.full gloss polyurethane enamel (two pack) exterior finishing paint to specification rdso/m&c/pcn/100/2018, chapter-v colour :pu pearl light grey ral- 9022 (metallic finish)-540 ltrs. 6.full gloss polyurethane enamel (two pack) exterior finishing paint to specification rdso/m&c/pcn /100 / 2018,chapter-v colour :pu signal blue ral-5005 (metallic finish)-420 ltrs. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43593584

30 Jan, 2026 NA

Mughalsarai - Uttar Pradesh

Tender For supply of brush paints and varnishes flat rubber set size 12 mm to specification no. is- 384/2012, pt.- 1 grade-1 and bristle to is- 1844/1993 rev.-2 type a. [ warranty period: 30 months after the date of delivery ]

CTN :43581844

27 Jan, 2026 2.20 Lacs

Mathura - Uttar Pradesh

Tender For supply of flood light 60watt , mercury light 24watt , led bulb 12watt , duct pipe half inch , 2 core 4mm power cable , lamp light , cutting plier , screwdriver , capping casing half inch , sky blue paints , black paints , red paints , white paints , blue paints , thinner , motor pipe 1 inch , paint brush , receiver card for led screen , power card for led screen , diode for led screen

CTN :43588006

31 Jan, 2026 NA

Kolar - Karnataka

Tender For supply of colin spray , liquid soap oil , white paint marker pen , marker pen for white board

CTN :43423875

19 Jan, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of towel rail / ring for bathroom (q3) , wire mesh fabric or cloth (v2) as per is 1568 (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , toilet seat covers (v2) (q4) , tower bolts (ferrous metals) as per is 204 (q3) , stainless steel butt hinges as per is 12817 (q3) , waste pipe (q3) , curtain pipe, sider and mounting bracket (q4) , thinner for epoxy paints (bhel) (q3) , m - seal as per is 9197 (q3) , metal alloy casting water tap with aerator (v2) (q3) , hasps and staples as per is 363 (q3) , ptmt tap fitting (q3)

Central Government/Public Sector

CTN :43252686

19 Jan, 2026 71.84 Lacs

Cuddapah - Andhra Pradesh

Tender For corrigendum : tender for supply of earth work in excavation by mechanical means , filling by brought out excavated earth , providing and laying in position specified grade of reinforced cement concrete , supplying and filling in plinth with sand floors , providing and laying in position specified grade of reinforced cement concrete , shuttering in foundations , shuttering in superstructure columns , steel reinforcement for rcc , applying priming coats with primer , wall painting with acrylic emulsion paint , structural steel work riveted , brick work with common fly ash bricks , half brick masonry with non modular fly ash bricks , 15 mm cement plaster with mix , providing frosted glass panes 4 mm thick , neat cement punning. , painting with synthetic enamel paint , finishing walls with acrylic smooth exterior paint , providing and laying ceramic glazed floor tiles , providing and laying 60mm thick factory made cement concrete paver block , 6 mm cement plaster of mix , providing and fixing on wall face unplasticised rigid pvc rain water pipes , grading roof for water proofing treatment , making soak pit , providing and fixing gi , do gi pipe 20m dia , do gi pipe 25m dia , do gi pipe 40m dia , providing and fixing white vitreous china pedestal type , providing and fixing white vitreous china wash basin , providing and fixing precoated galvanised steel sheet roofing accessories , supplying and applying two coats of white wash , providing and placing on terrace polyethylene water storage tank , providing and fixing ptmt pillar cock , providing and fixing on wall face un plasticised rigid pvc swr , providing and fixing brass bibcock , providing and fixing mirror of superior glass , providing and fixing cp brass shower rose , providing and fixing cp brass shower valve rose , clearing jungle , 30 mm thick factory made polyvinyl chloride , supplying chemical emulsion , providing and applying white cement based putty , laying of one number pvc , supplying and fixing cable route marker , supplying and making end termination , supplying and fixing of following ways surface , supplying and fixing following rating , supplying and fixing dp sheet steel enclosure , supply of exhaust fan , installation of exhaust fan , supply of ceiling fan , installation testing and commissioning of ceiling fan , supply of ceiling fan regulators , supplying of led lights 20w , supplying of led lights 36w , supply of amps switch piano switch , supply of socket , supply of switch , supply of socket outlet , supplying and fixing 3 pin required. , supplying and fixing suitable size gi box , wiring for circuit submain wiring , wiring for circuit/ submain wiring alongwith earth wire , installation testing commissioning of wall bracket , providing and fixing danger notice plate , supplying and fixing metal box , supplying and fixing metal box , providing & fixing fixing metal box , earthing with copper earth plate , providing and fixing 25 gi , providing and fixing of lightning conductor finial , providing and fixing , providing and fixing gi , providing and fixing gi

CTN :43570438

22 Jan, 2026 NA

Damanjodi - Odisha

Tender For supply and delivery of paints and thinner in connection with civil structural works for 5th stream alumina plant at nalco damanjodi odisha and related facilities at vizag port

Central Government/Public Sector

CTN :43571011

17 Jan, 2026 NA

Jaipur - Rajasthan

Tender For supply of masonry related materials -1 grouting cement-1kg packet(myk laticrete, asian paints) 80 nos , dr.fixtit301 sbr latex pidicrete urp sbrlatex,for wate-proofing &repairs-1kg(grey) 100 nos ,feviquick 50 gm for stone fixing 50 nos ,white cement-jk,birla 100 nos ,cement pcc -ultra tech 20 nos ,trowels(karni/kanni)small 4 nos ,trowels(karni/kanni)large 4 nos ,chenni bit 12 mm 10 nos ,chenni bit 16 mm 10 nos ,measuring tape 10 m 3 nos ,stone cutting machine-bosch gdc-141 1 no ,stone cutting grinder-bosch (bosch gws 6-100 4 inch angle grinder) 1 no ,plastic tagari 4 nos ,iron chalana (for sand sieving) 1 no

Corporations And Associations And Others

CTN :43514578

16 Jan, 2026 33.81 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipments and construction of epdm flooring under open gym equipment in shahdara south zone, under mplads funds for various locations of parks in municipal corporation of delhi. - supply and installation of open gym equipments and construction of epdm flooring under open gym equipment in shahdara south zone, under mplads funds for various locations of parks in municipal corporation of delhi., seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)., cross trainer /elliptical exerciser dimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel

corporations/Associations/Others

CTN :43396666

27 Jan, 2026 3.02 Crore

Bangalore - Karnataka

Tender For corrigendum : procurement of 2k pu paints. - metallic silver 2k pu paint, base coat of different colour - 2k pu paint -orange, ashok layland blue 2k pu paint , base coat of different colour - 2k pu paint new shade blue paint volvo, cng green 2k pu hs paint, mat black 2k pu h.s paint, clear coat 2k pu, putty/polyster putty 2k pu, thinner for 2k pu paint, surfacer primer 2k pu, hardner for 2k pu surfacer primer, ashok layland white 2k pu paint , hardener for 2k pu clear coat, hardener for 2k pu paints, base coat of different colour - 2k pu paint- white, base coat of different colour - 2k pu paint metallic blue

Paints Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others

corporations/Associations/Others