Latest panel box Tenders | Government panel box Tenders

State Government

CTN :43253964

29 Dec, 2025 12.00 Lacs

Udaipur - Rajasthan

Tender For supply and installation of equipment for control system laboratory

State Government

CTN :42859019

29 Dec, 2025 9.81 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : aoh of electrical equipment and auxiliaries of sstpp unit-1 of 2x600mw, sstpp, mppgcl, khandwa. - generator, misc works in generator overhauling, h2 purging after unit shutdown & h2 refilling before of unit light up., transformers, general overhauling of ht transformers, generating transformer(work description as detailed intender schedule), station transformer (work description as detailed intender schedule), inter-connecting transformer (work description as detailed intender schedule), unit auxiliary transformer (work description as detailed intender schedule), neutral grounding panel ( gen., gt, st, uats) {(work description as detailed intender schedule)}, general overhauling of lt transformers, lt dry type transformers (work description as detailed intender schedule), lt oil filled transformers (work description as detailed intender schedule), switchyard, breaker, isolators ,earth switch, bay equipments (cleaning & terminal tightness), bus ducts (work description as detailed intender schedule), 21/ 15.75 kv gen bus duct, 11 kv uat/st bus duct, 6.6 kv uat/st bus duct, lt transformer bus duct, esp, ltmsb & acp buses , ec panels & heater work (as per scope of work), ltmsb & acp breakers (as per scope of work), ltmsb & acp modules(as per scope of work)eerm=80 , cerm=80, gdrm=8, fields= 80, vfd supply=4, lighting supply & etc. = 25(approx), ht switchgear (11 kv/ 6.6 kv), bus cleaning , tightness & complete inspection of all buses., breaker cleaning, tightness & operation checking, bop switchgears panel / local control panels / wall mounted panels and 415v lt swbd/ mcc/acdb/dcdb switchgear panel, bus cleaning , tightness & complete inspection of all buses. breaker cleaning, tightness & operation checking, power house lighting & power supply, cleaning , tightness & complete inspection of all lightning transformers & ldb, providing power supply as per site requirement & for other maintenance work of bmd,tmd etc., ht motors, servicing of ht motors, ht motor cooler (general inspection & cleaning), lt motors servicing, motors above 40 kw, motor 40 kw to 11 kw, motors 10 kw to 5.5 kw, motors 5 kw to 1.1 kw, motors 1 kw and below, esp lt motors 1 kw and below, lt motor overhauling, motors above 40 kw(machining), motor 40 kw to 11 kw, motors 10 kw to 5.5 kw, motors 5 kw to 1.1 kw, motors 1 kw and below, servicing of dc bus, cleaning/servicing of 220 v dcdb buses & modules, servicing of soot blowers, servicing of soot blower motor 1 kw & below, servicing of soot blower panel/modules

corporations/Associations/Others

CTN :37136291

09 Jan, 2026 595.80 Crore

Dehradun - Uttarakhand

Tender For corrigendum : electro-mechanical works of 3x100 mw lakhwar mpp which includes detailed design & engineering, manufacture, quality assurance, quality control, shop assembly, shop testing, transportation, insurance till commissioning, delivery at site, site storage and preservation, erection, testing and commissioning, performance testing, field acceptance testing, training of employer s personnel, handing over and guarantee of two years for the electro-mechanical equipment & systems , on epc (engineering, procurement & construction) basis.

Corporations And Associations And Others

CTN :43228189

25 Dec, 2025 1.49 Lacs

Delhi - Delhi

Tender For supply of machinery/tools for various parks at pul pehladpur ward no. 179 in central zone - brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hp max output shaft speed at cutting attachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml. weight( dry,without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only. multi function handle: should have acceleration ,on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle : should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only. certification : must have valid en certificaton, petrol operated pole prunnerengine : single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 cc power output : should be minimum 1.2 hpweight (dry without cutting attachment & fuel ): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capcity (ml): must have minimum 200 ml.clutch : clutch shoe linining should be metal only.guide bar length : minimum 30cm guide bar and chain : should have same manufacture only .chain type : every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max.output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain ( cm ) : should be mimimum 220 cm - compressed & total length of equipment - minimum 350 cm - extended. sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle - extended poistion : should not be more than 5.5 m/s2certification : must have tuv certification with test standard en iso 11680., hedge trimmerengine: 2- stroke - single cylinder air cooled.engine displacement: should be between 20-25 ccpower output: should be minimunm 1 hpfuel tank capacity: minimum 400 mlweight: should not be more than 6.0 kgclutch: clutch linning should be metal only.handle: must have rotating multi-function handleanti vibration system: must have spring loaded technology for anti vibration system design: should have double sided blade with tooth spacing minimum 35mm bar length: minimum 600 mmblade: should have chrome plated -anti corrsion. stroke rate ( l/min): minimum 3000 vibration level m/s2 at right handle: should not be more than 3.5 m/s2.sound pressure level (db..(a)): should not be more than 95certification: should have tuv with en iso 10517:2009, lopperanvil tree branch lopper lade material - high carbon steel with hard surface treatment, overall length - not less than 914 mm handle material - similar materil as per requirement, weight - 1.5 kg., cutting dia - not less than 38mm

CTN :42930907

22 Dec, 2025 NA

Siang - Arunachal Pradesh

Tender For bid to ras supply of it hardware for est and decision support centre c c - standalone pc , adn pc , visualizer , projection system , networking switching control equipment and switch , podium with integrated control and annotation , biometric system dual factor , mobile jammer , cctv system , fire alarm system , online ups 5 kva

CTN :43225953

07 Jan, 2026 5.00 Lacs

Panaji - Goa

Tender For supply installation and commissioning of lab. equipment for civil engg dept - digital compression testing machine with capacity of 3000kn (300 tons) with flexural attachment of 100kn capacity including accessories and toolkitspecification:-1. machine capacity required : - digital compression testing machine with capacity of 3000kn (300 tons) with flexural attachment of 100kn capacity. digital compression testing machine shall confirm is 516 and is 14858. digital compression testing machine for testing concrete cubes of size 100mm, 150mm, 200mm ,300mm and concrete cylinder specimen up to 300mm diameter and 300mm height . also the cement mortar cubes of 70.7 mm size and 50mm size. 2. loading frame:- steel welded loading frame with top cross head base and solid side walls. hydraulic piston is fixed to the base and platens are hardened, ground and polished. the upper and lower plate should be marked with the guidelines on the lower plate to keep the specimen co-axially with hydraulic jack. the machine should be provided with suitable side spacers as standard to accommodate the variety of sizes of specimens as indicated above. the two speed pump to allow fast approach of platens for daylight closure and also to allow precise control over load application using control lever and valves.3. digital display:- display shall show force and stress values in si units. the electronic control unit shall be based on suitable processor with a built in interface for laptop and computers. the processor speed shall be such that the online load deformation curve on full screen is smooth.4. the storage capacity to record and store 2000 complete test results with the facility of printing results/logged data through built in parallel port. least count of 0.1 kn.5. automatic controls for switch off on overload or over travel or specimen break or manual termination.6. power supply :- suitable for operation on 220v/230v single phase 50hz ac supply 7. additional requirements maximum clearance between plate 400mm. maximum distance between side platen 400 mm platen size 320mm square.8. flexure attachment:- flexure testing machine of 10 tons ( 100kn) capacity confirming to is 516. loading to be applied by the downward movement of piston. machine shall be suitable to test beams of 100x100x500 mm and 150x150x700mm.machine shall be supplied with suitable standard spacers for testing different sizes of beams.9. additional requirement for flexural test: three point loading light weight rugged high strength frame.least count 0.1 kndistance between supporting rollers: - 600mm for 150x150 x700 mm beam and 400mm for 100x100x500 mm beamdistance between loading rollers 200mm for 150x150x700mm beam 133 mm for 100 x 100 x500 mm beam power supply suitable for operation 220v 50hz single phase.10. the machine should be supplied with accurate toolkit11. compatible software should be included

CTN :42965611

31 Dec, 2025 70.00 Lacs

Chennai - Tamil Nadu

Tender For corrigendum : supply of supply of 50 hp vrf or vrv outdoor unit , supply of indoor unit floor standing dx type ahu. capacity of each unit is 50 hp , supply installation testing and commissioning of refrigerant pipes. payment shall be as per actuals. , supply and installation of remote status indication panel , supply and installation of switch panel and wiring of equipment , supply of 4 core 16 sqmm copper shielded armoured cable odu to mcb. payment shall be as per actuals. , supply of 4 core 10 sqmm copper shielded armourmed cable ahu to switch panel. payment shall be as per actuals. , supply of control cable, 3 core, 1. 5 sq. mm, suitable for non-polarity multiplex transmission system, laid in pvc piping and clamp. payment shall be as per actuals. , supply of refrigerent gas , intallation testing commissioning of 3x50 hp vrf or vrv outdoor unit and ahus , nitrogen flushing pressure testing vaccumising and commissioning the system , modification of duct , supply fabrication installation of ms base frame or platform for odus , supply and installation of canvas connection , supply and installation of g. i perforated cable tray with top cover with supports , dismantling and shifting of existing ac plants , training , miscellaneous civil works , any other supply or works necessary for satisfactory completion of the entire job

CTN :43199618

26 Dec, 2025 NA

Salem - Tamil Nadu

Tender For supply of engineering laboratory equipment and machineries for department of food technology and dairy technology - purchase of engineering laboratory equipments and machineries, venturimeter test rig1 dia cast iron venturi tube, pressure tappings, manometer, 0.5 hp motor-pump unit, orifice meter test rigorifice plate 20 mm, differential manometer, water circulation setup, reynold s apparatusglass tube, dye injector, constant head tank, flow regulator, pipe friction apparatus1 ss pipe (1.5 m), inlet/outlet pressure tapping, differential manometer, minor loss apparatusbends, elbows, sudden contraction/expansion, differential manometer, u-tube manometeracrylic body, 0 300 mm water column, mercury-free, inclined tube manometertransparent acrylic tube with adjustable scale, 0 200 mm range, piezometer board7-tube setup mounted on frame, for pressure head measurement, rotameter calibration setupflow range 0 2 l/s, with pump and flow control valves, pitot tube apparatusss tube, manometer connection, stand-mounted, reciprocating pump test rigtransparent cylinder, 0.25 hp motor, discharge measuring tank, centrifugal pump test rig1.0 hp motor, pressure gauges, energy meter, closed-loop flow system, gear pump test rigoil-compatible, 0.5 hp motor, discharge measurement unit, emptying time of tank apparatusacrylic tank (50 l), interchangeable orifices, stopwatch, free flow channel apparatusopen flume (1.5 m), v-notch weir, point gauge, recirculating pump, pipe and fittings display unitss, pvc, and ms pipe samples with elbows, tees, reducers, valve display unitgate, globe, butterfly, check, ball valves cut section models, digital tachometernon-contact optical, range 0 9999 rpm, flow measuring tankgraduated (0 25 l), acrylic, stopwatchdigital, accuracy 0.01 s, single phase transformer test bench1 kva, 230/115 v with meters for open circuit & short circuit tests, three phase induction motor (squirrel cage)3 hp, 415 v with dol starter and reversing switch, single phase slip ring induction motor1 hp, 230 v with rotor resistance starter (manual/automatic), dc shunt motor with 3-point starter1 hp, 220 v with field regulator, dc shunt generator coupled set1 hp, 220 v dc motor coupled to 1 kw generator, voltmeter(ac/dc) - 0-150v,0-300v (each 5 nos), clamp meter - 0 600v, 0 200a

CTN :43234549

08 Jan, 2026 NA

Chennai - Tamil Nadu

Tender For supply of calibration of instruments and equipment e e - lcgc electronic monopan balance , lcgc electronic monopan balance radwag , digital hot air oven , digital muffle furnace , analytical weighing balance monopan 010g braun make single , ph meter , automated crude fiber analyser temperature and pressure control sensor , thermocouple with sensor , weight box , hectoliter weight 1 liter measure , glass thermometer 0 to 75 c , alcoholmeter , vernier caliper , digital vernier caliper , temperature humidity sensor , specific gravity bottole , sieves 300 micron , sieves 500 micron , sieves 1000 micron , sieves 9. 5 mm , sieves 11. 75 mm , sieves 710 micron , sieves 600 micron , laboratory refrigerator

CTN :42808117

29 Dec, 2025 NA

Ludhiana - Punjab

Tender For corrigendum : selection of internet service provider (isp) for network connectivity between ludhiana safe city data center- municipal control center (mcc) and field equipment for a period of two years

Panel Box Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

Corporations And Associations And Others