Latest paper trimmer Tenders | Government paper trimmer Tenders

State Government

CTN :41704628

22 Sep, 2025 1.72 Lacs

Ahmedabad - Gujarat

Tender For gabion structure-1excavation in all sorts of soil (including wet and slushy condition of soil )with yellow, sandy, gravelly soil including soft murrum &h.m.including sorting and stacking and depositeing the excavated stuff in uniform layers as and where directed up to lead of 30 mt. and lift as shown below including clearing the site etc. complete.sor page.no.25chapter 5 it.no.1 (a)-2023-24-irrigation,providing and laying cc 1:2:4 grade usingcement,sand, and machine crushed metal including providing and erecting necessary form work, centring, vibrating smooth finishing watering and curing as directed with all leads and lifts etc. complate.sorpage.no.38chapter 5 it.no.1-3(a) substructure -2023-24-irrigation,providing oil paint and water color base sign board for structure area including painting on site etc.comp.,providing and laying foundation concrete of proportion (1:4:8)as under by using cement, sand, and with greval (35 mm to 80 mm.size) in specified concrete laid in situ including necessary temping, smooth finishing ,wateringand curing as directed with all leads and lifts etc. complate.sor page.no.39 chapter 5 it.no.1-1 (b) with hand broken metal -2023-24-irrigation,providing & laying non woven geo fabric of atlest 235 gm /sm as directed.s.o.r.pg no.55.ch no.10.-item no.1.2023-24 irrigation.,providing sipplying and placing mechnically wooven double twisted hexagonal zn+pvc coated box wire mesh gabions of size 1.0 mt x 1.0 mt x1.00 mt filled with black trap rubble stone having weight 30 to 50 kg with mesh size 10 cm x 12 cm including packing, interlocking of stones, fusing of gabions, typing to each other properly & laying into the required line ,level, slope as per detailed drawing & specification etc.comp.s.o.r.pg no.55.ch no.10.-item no.2.2023-24 irrigation.,earth work in emabankment from borrowpits in all sorts of soil and soft murrum or other suitable strata as directed including breaking the clods and dressing to the design section including cutting the proud section with lead as under and all lift including site clearing etc.complete.for all canal capacity.sorpage.no.26 chapter 5 it.no.5 (a)-2023-24-irrigation

State Government

CTN :41704633

22 Sep, 2025 18.74 Lacs

Ahmedabad - Gujarat

Tender For excavation in all sorts of soil (including wet and slushy condition of soil)with yellow,sandy,gravelly soil including soft murrum &h.m.including sorting and stacking and depositeing the excavated stuff in uniform layers as and where directed up to lead of 30 mt. and lift as shown below including clearing the site etc. complate.sorpage.no.25 chapter 5 it.no.1 (a)-2023-24-irrigation,providing and laying foundation concrete of proportion (1:4:8)as under by using cement,sand, and with greval (35 mm to 80 mm.size) in specified concrete laid in situ including necessary temping, smooth finishing, wateringand curing as directed with all leads and lifts etc. complete.sor page.no.39 chapter 5 it.no.1-1 (b)with hand broken metal -2023-24-irrigation,providing and laying cc 1:2:4 grade using cement, sand, and machine crushed metal including providing and erecting necessary form work, centering, vibrating smooth finishing watering and curing as directed with all leads and lifts etc. complate.sorpage.no.38 chapter 5 it.no.1-3 (a)sub structure -2023-24-irrigation,providing, supplying and fixing reinforced concrete heavy duty non -pressure pipes with collrs for culverts carrying heavy traffic as per isi 458-1991 specificstion incluing setting pipes in c.m. 1:2 watering and laying of class np3 of following internal diameter 600 mm dia .s.o.r. r&b 2024-2025 item no 26089ca.pg no.48,earth work in emabankment from borrowpits in all sorts of soil and soft murrum or other suitable strata as directed including breaking the clods and dressing to the design section including cutting the proud section with lead as under and all lift including site clearing etc.complete.for all canal capacity.sor page.no.26 chapter 5 it.no.5 (a)-2023-24-irrigation,providing and fixing marble plat 60 cm x 45 cm x 4 cm. size including engraving for letters as directed etc.comp.s.o.r. pg.17 it.no.11.s.o.r 2023-2024.,providing tata hitachi hyd.excavator ex 200 0.9chain for site cleaning including heavy vad trees roots cutting and old mud disposing and site clearing as par instruction of site supervisor for this works (statement showing the government rate for the year 2024-25 ex.engineer irrigation mech.divison no.5 ahmedabad -sr. no. -1,p.no. 81.),suppling and fixing road sign board of m.s. plates and angle iron including painting, lettering etc.com.inc.fixing.in cc.1:4:8 with necessaryecavation.etc.comp.non reflectivetype.(r&b-s.o.r.p.no.177.it.as per nbo. 0.

State Government

CTN :41704640

22 Sep, 2025 23.48 Lacs

Ahmedabad - Gujarat

Tender For providing tata hitachi hyd.excavator ex 200 0.9chain for site cleaning including heavy vad trees roots cutting and old mud disposing and site clearing as par instruction of site supervisor for this works (statement showing the government rate for the year,earth work in emabankment from borrowpits in all sorts of soil and soft murrum or other suitable strata as directed including breaking the clods and dressing to the design section including cutting the proud section with lead as under and all lift including site clearing etc.complete. for all canal capacity.sor page.no.26 chapter 5 it.no.5 (a)-2023-24-irrigation,extra lead charges for each additional km lead or part there of beyond 1.0 km and up to 5.0 km for embaekment work including all lift etc .comp.sor .pg.27-ch.5.item no 6.2023 -2024 irrigation.,providing and laying foundation concrete of proportion (1:4:8)as under by using cement,sand, and with greval (35 mm to 80 mm.size) in specified concrete laid in situ including necessary temping, smooth finishing, wateringand curing as directed with all leads and lifts etc. complate.sor page.no.39 chapter 5 it.no.1-1 (b) with hand broken metal -2023-24-irrigation,providing and laying cc 1:2:4 grade using cement, sand, and machine crushed metal including providing and erecting necessary form work, centering, vibrating smooth finishing watering and curing as directed with all leads and lifts etc. complate.sor page.no.39 chapter 5 it.no.1-3 (a) sub structure -2023-24-irrigation,providing and fixing marble plat 60 cm x 45 cm x 4 cm. size including engraving for letters as directed etc.comp.s.o.r. pg.17 it.no.11.s.o.r 2023 -2024.

State Government

CTN :41704645

22 Sep, 2025 31.98 Lacs

Ahmedabad - Gujarat

Tender For excavation in all sorts of soil (including wet and slushy condition of soil )with yellow, sandy, gravelly soil including soft murrum &h.m.including sorting and stacking and depositeing the excavated stuff in uniform layers as and where directed up to lead of 30 mt. and lift as shown below including clearing the site etc. complate.sor page.no.25 chapter 5 it.no.1(a)-2023-24-irrigation,providing and laying foundation concrete of proportion (1:4:8)as under by using cement, sand, and with greval (35 mm to 80 mm.size) in specified concrete laid in situ including necessary temping, smooth finishing, wateringand curing as directed with all leads and lifts etc. complate.sorpage.no.39 chapter 5 it.no.1-1 (b),with hand broken metal -2023-24-irrigationproviding and laying cc 1:2:4 grade using cement,sand, and machine crushed metal including providing and erecting necessary form work, centering, vibrating smooth finishing watering and curing as directed with all leads and lifts etc. complate.sorpage.no.38 chapter 5 it.no.1-3 (a)sub structure -2023-24-irrigation,providing & laying non woven geo fabric of atlest 235 gm /sm as directed.s.o.r.pg no.55.ch no. 10.-item no.1.2023-24 irrigation.,providing sipplying and placing mechnically wooven double twisted hexagonal zn+pvc coated box wire mesh gabions of size 1.0 mt x 1.0 mt x1.00 mt filled with black trap ruble stone having weight 30 to 50 kg with mesh size 10 cm x 12 cm including packing ,interlocking of stones, fusing of gabions ,typing to each other properly & laying into the required line, level, slope as per detailed drawing & specification etc.comp.s.o.r.pg no.55.ch no. 10.-item no.2.2023-24 irrigation,earth work in emabankment from borrowpits in all sorts of soil and soft murrum or other suitable strata as directed including breaking the clods and dressing to the design section including cutting the proud section with lead as under and all lift including site clearing etc.complete.for allcanal capacity.sor page.no.26chapter 5 it.no.5 (a)-2023-24-irrigation,providing oil paint and water color base sign board for structure area including painting on site etc.comp.

CTN :41405336

06 Sep, 2025 NA

Saharsa - Bihar

Tender For bid to ras supply of mechanical and civil lab equipments d d - shaper machine , heavy duty lathe machine capstan lathe , electric furnace smithy shop casting shop , foundry shop setup all tools and equipments , wood power planner , wood power cutter , try square 8 , needle file for sharping teeth of rip saw , wood lathe machine tool set , bosch gks 190 heavy duty electric circular saw 1 , tool box kit , hacksaw blade 12 , triangular file use on iron , square file use on iron , drill bit , welding goggles , soldering set , brazing set , snip 12 for sheet metal cutting , stake for sheet metal shaping , milling machine gear cutting tools , milling machine end cutting tools , cnc milling cutting tools , transparent working model of 4 stroke petrol engine , transparent working model of 4 stroke diesel engine , demonstrationa l section working model of two stroke diesel engine , demonstrationa l section working model of two stroke petrol engine , cut section of carburettor fuel injector turbocharger , valve timing diagram apparatus , cut section model of simple gear train , impact of jets on vanes , pelton wheel turbine test rig standard , concrete mixer , cube moulds , digital weighing balance , digital platform balance , sieves , split tensile strength , trowel , spatulla , guinia , spirit level , vibrator machine with needle , plate vibrator , strain guage indicator , weight , weight hanger , micrometer , liquid limit device , shrinkage limit set , direct shear apparutus moterised with 12 speed , electronic balance , non corridible air tight container or can , double ring infiltrometer outer ring , los angeles abrasion test , digital vernier calliper 200 x 01mm , stainless steel scale 300 mm , steel measuring tape 5 m , stainless steel degree protractor , metal cut off saw , high precision weighing ) /bid number : gem/2025/b/6544002 * /dated: 11-08-2025 & & / bid document 1 / 37

CTN :41652277

20 Sep, 2025 NA

Uttarkashi - Uttarakhand

Tender For supply of anchor bolt , core bit 76 mm , core bit concrete , concrete core cutting machine , rebar scanner for rcc structure

Central Government/Public Sector

CTN :41489566

06 Oct, 2025 1.00 Crore

Noida - Uttar Pradesh

Tender For open tender document for e-procurement of laboratory equipment (soil, aggregates, cement, reinforcing bar, concrete test equipment, water, geo-textile and geogrid) for material testing laboratory of iahe - soil, unconfined compressive strengthcompression device with digital load frame: hydraulic proving ring, dial gauge vernier callipers, timer, oven, weighing balance, shear strength vane shear apparatus, grain size analysis as per is:2720 (part- iv)pipette apparatus (i) sampling pipette (ii) glass sedimentation tubes (iii) weighing bottles (iv) deleted (v) stirring apparatus (vi) sieves -2mm, 425umm , 75umm is sieves (vii) deleted, specific gravityhydrometer apparatus: two 1000 ml graduated cylinders, dispersing agent solution containing sodiumhexa-metaphosphate, dessicator and centimetre scale., shrinkage limit testfull set of equipments 1.) evaporating dish of porcelain, 2.) spatula and straight edge, 3.) balance-sensitive to 0.01 g minimum.4.) shrinkage dish. circular, porcelain or non-corroding metal dish, 5.) glass cup. 50-55 mm in diameter and 25 mm in height,6.) glass plates. two, 75x75 mm one plate of plain glass and the other prongs, 7.) thermostatically controlled oven,8.) wash bottle containing distilled water, 9.) graduate-glass, with capacity of 25 ml. 10.) mercury., sand equivalent value(i) graduated cylinder (ii) irrigator tube (iii) siphon assembly (iv) weighted foot assembly (v) measuring can (vi) sieve -4.75mm (vii) funnel (viii) 4- litre bottle (ix) flat pan (x) timing device (xi) sand equivalent shaker, ph test -electronic method(i) ph meter (ii) digital balance 300 gm capacity-sensitive 0.001gm (iii) 100ml glass beaker -3nos. (iv) volumetric flask-500ml -nos. (v) wash bottle-100 ml (vi) mortar with rubber covered pestle, aggregates, polished stone value (i) accelerated polish machine mounted on firm ,level and non resilient base of stone or concrete (ii) road wheel (iii) means for rotating road wheel (iv) means for bringing the surface of a rubber-tyred wheel of 20 cm diameter and 5 cm breadth to bear on the stone surface of the road wheel with a total load of 40 kg. (v) means to feed the sand and water at a uniform rate (vi ) means to feed the emery powder and water at uniform rate (vii) friction tester: is: 2386 part 4 as per specification of rrl uk (viii) 25 kg hard siliceous sand (ix) emery powder 5 kg, alkali aggregate reactivitymortar bar method: scales, weights, sieves, glass graduates, specimen moulds, mixing bowl, tamper, trowel, containers, length comparator, alkali aggregate reactivity chemical method:1. electronic balance2. pulveriser3. reaction container, reagents, glassware, petrographic examination 1. geological hammer2. petrographic microscope3. screen confirming to is sieve4. digital balance5. portable handheld cutting machine6. hand lens7. glass sides etc., deleterious material & organic impuritiessedimentation pipette: a watertight screw-topped glass jar, 1000 ml measuring cylinder, chemicals, containers, sieves, cement, soundness (autoclave apparatus)graduated glass cylinders, moulds, autoclave, length comparator, compaction (mortar cube vibrator), fineness (blaine air permeability apparatus), ph meter ( 2 in nos.), reinforcing bar (steel), reinforcing bar (steel) universal testing machine,to determine unit weight, yield strength,, proof stress, ultimate tensile strength, % elongation, bend and re-bend test, concrete test equipment, vibrating table 1mx1m(full set of equipments), needle vibrator ( 2 in nos.), permeability, dry shrinkage (shrinkage apparatus) ( 2 in nos.)(full set of equipments), air content (air entrainment meter apparatus)(full set of equipments), durability (rapid chloride ion permissibility apparatus), depth of penetration (water permeability apparatus) ( 2 in nos.)(full set of equipments), water, physical analysis of water, geo textile and geogrid, pull-out resistance of geotextile /geogrid

CTN :41638467

09 Sep, 2025 NA

Surat - Gujarat

Tender For supply of mechanical and pneumatic items at hazira lpg plant d d - bolt csk ms m6 x 25 with lock nut , bolt csk ms m8 x 30with lock nut , bolt hex hd ss m10x35 w by or or locknut , csk 12 x 50 bolt nut , csk 8 x 50 bolt and nut , hex bolt 8 x 50 and nut , hex bolt 8x75 x and nut , hex bolt 8x25 and nut , hex bolt nut 12x50 , allen bolt 10x50 bolt nut , allen cap 8x40 nut bolt , allen cap 6x30 nut bolt , allen cap 10x40 nut bolt , bolt hex hd ms m8x30 w by or or check nut , bolt hex hd ms m6x25 w by or or check nut , 10mm stud 1 mtr , bolt allen head as a193 b7 m8x30 , bolt allen head as a193 b7 m10x40 , bolt allen head ht m12x40 , pop rivit screw 25mm , nut bolt 4x25 , nut bolt 4x50 , stud 12x75 with double nut , stud 16x100 with double nut , cutting wheel 4inch , cutting wheel 5inch , bosch grinding wheel 4inch , bosch grinding wheel 5inch , bosch flap polish wheel 5inch , electrode weld 6013 1 3,15mm , electrode weld 6013 2,5mm , electrode ss to ms weld e308 16 2,5 ss , electrode weld e309 16 3,15ss ms , drill bit 10mm concrete , drill bit 12mm concrete , drill bit grouting hss m5 ms , drill bit grouting hss m6 ms , drill bit grouting hss m8 ms , drill bit hss 10mm for ms , drill bit hss 12mm for ms , spirit level 12inch , crc spray 400gm , rustoline 1ltr , loctite e 551 pump , spray wd 40 , paint remover spray , oxygen hose 8mm 1300100203 , fuel hose 8mm 1300100193 , welding by or or earthing holder , welding screen helmet , welding cbl n arm 1,1kv cu pvc , ring spanner set , d spanner set , allen key set 1,5 10mm , star allenlkey set , circlip plier external by or or internal , combination plier , hacksaw frame , hacksaw blade , emery paper sheet , spider l100 , spider l110 , rrl100 by or or 110 coupling with bore , ) /bid number : gem/2025/b/6626394 * /dated: 30-08-2025 & & / bid document 1 / 77 & & ' ' /item category hand glove leather palm 10inch , 1 by or or 2inch socket weld tee , 1 by or or 2inch ms s by or or w elbow , 1 by or or 2inch ms coupling s by or or w , 1inch ms coupling s by or or w , 1inch ms elbow s by or or w , 1inch ms tee s by or or w , 1 by or or 2inch ball valve brass , 1inch forgeed valve 800 , 4 by or or 6 sqmm copper lugs , 10 sqmm copper lugs , 1 by or or 2inch spiral gasket300 , 1inch spiral gasket300 , 2inch spiral gasket300 , 4inch spiral gasket300 , clable tie150m , cable tie 200mm , cable tie 250mm , oxygen refilling , pad lock 65 mm , hinches 4inchx6mm , welding glass set , goggle white by or or black , supply of m seal , bearing skf 6304 skf , anchor fastener w by or or nut m10x100 , anchor fastener w by or or nut m12x125 , anchor fastener w by or or nut m16x150 , 1 by or or 2inch ms elbow , 1 by or or 2inch ms tee , 1 by or or 2inch valve forged 800 , 1 by or or 2inch hex nipple hydrolic , welding machine repair , grinder m by or or c repair , boring coupling and duplex gears , fan pedastal repaing flp , motor repairing 3hp flp , motor repairing 5hp flp , celling fan repair , structural steel , spac pc 1 by or or 2 x 12 mm , spac pl 1 by or or 2 x 12 mm , spac puc 12 mm , spac pg 12 x 8 mm , spac pc 1 by or or 4 x 8 mm , spac pc 1 by or or 8 x 8 mm , spac puc 8 mm , spac pu pipe blue 8 mm , spac pu pipe blue 12 mm , spac pu pipe blue 6 mm , spac pu pipe blue 4 mm , spac frl set 1 by or or 2 , spac frl set 1 by or or 4 , spac air regulator 1 by or or 4 , spac pressure gauge 1 by or or 8 , spac hand lever 1 by or or 4 x 5 by or or 3 detent , spac d,coil solenoid valve 1 by or or 4 x 5 by or or 2 230v , spac solenoid valve 1 by or or 4 x 5 by or or 2 230v ac , spac esnc cylinder 50 x 160 , spac esnc cylinder 50 x 550 , spac esnc cylinder 50 x 320 , spac esnc cylinder 40 x 300 , spac esnc cylinder 50 x 400 , spac esnc cylinder 32 x 300

CTN :41620090

04 Sep, 2025 6.31 Lacs

Multi City - Karnataka

Tender For material supply for construction of sanjeevini shed in gouripura village under gouripura gram panchayat - nceabroken stone aggregate 40 mm size, nceabroken stone aggregate 20 mm size, nceabroken stone aggregate 12 mm to 10 mm size, nceacoarse sand zone iii, nceaportland cement, nceamier concrete 1 cum capacity, nceaadd watering charges at 1 on material, nceaplasticizer super plasticizer, nceahom of vibrator 071 days, nceatmt bars fe 500, nceabinding wire, nceasize stone 20 20 25 cms, nceabond stone 20 20 45 cm, nceaboulders, nceamier concrete sqmall used in culvert, nceaadd watering charges at 1 on labour, nceagravel 236 mmmurrum, nceatractor 40 hp, nceasilver oak or euivalent planks 38 mm thick, nceacasurina poles 100 150 mm, nceaadd handling loading and unloading at 2 on material, nceacasurina poles 75 100 mm dia, nceajungle wood runners and planks, nceasolid concrete block 40 15 20 cms 500 nsqmm, nceamason class i with tools, nceaadd handling loading and unloading at 1 on material, nceasolid concrete blocks 40 10 20 cms400 nsqmm, nceaadd providing and removing scaffolding at 3 on labour, nceacudddapah slab 25 cms thick, nceapigment, nceamathinandi wood planks for panels 25 mm thick, nceaadd cutting and other wastage 5, nceahom of machinaries for planing, nceamathinandi wood scantling, nceaunit cost as per the specification, nceams rods, nceams flat, nceafitter class i, nceawelder grade i, nceaadd hom of welding and grinding machine 4 on material, nceaready mi primer paint ready mi red lead paint, nceapainter class i, nceaenamel metal paint, nceaceramic tiles 30 30 cms, nceaglazed tiles 300450, nceaborder tiles 30 10 cms, nceaadd white cement for pointing at 2 on material, nceaplastic emulsion paint, nceaadd brush putty sand paper roller at 5 on cost of paint, nceawater proofing cement paint, nceaadd brush putty sand paper at 2 on cost of paint, nceapolyenthylene water storage tank of specified capacity l, ncealabour charges for lifting and placing in position and making connection at 7 on material, nceahandling loading and unloading 3 on material, nceaindian type water closet of size 580 mm of specified make with footrests, ncea100mm s or p trap, nceachlorinated polyvinyl chloride cpvc pipe 25 mm outer dia, nceastone aggregatesingle size 20 mm nominal size, nceastone aggregatesingle size 10 mm nominal size, nceapvc pipe of 10kgcum110 mm, ncearcc ring 120 m dia, ncearcc concrete cap 120 m dia

CTN :41641694

09 Sep, 2025 13.48 Lacs

Multi City - Karnataka

Tender For solid waste disposal unit construction work - ggg11075-add white lead paint gasket cement sand for making good the wall and floor at 2percentage on material, ggg11074-100mm s or p trap, ggg11073-indian type water closet of size 580 mm of specified make with footrests, ggg11072-pvc pipe of 10kg cum 140 mm, ggg11071-fabrication charges., ggg11070-cost of 6.5mm m.s. coil, ggg11069-transportation charges of materials beyond 5 km at 10percentage, ggg11068-rcc cap 1000 mm dia 100 mm thick, ggg11067-add brush putty sand paper roller at 5percentage on cost of paint, ggg11066-enamel paint, ggg11065-unit cost as per the specification, ggg11064-tools & plants and electrical charges at2percentage, ggg11063-add brush at 1percentage on cost of paint, ggg11062-enamel metal paint, ggg11061-hom of cutting and grinding machine, ggg11060-hom of welding and grinding machine, ggg11059-corbon electrodes, ggg11058-anchor bolts 750mm, ggg11057-base plate or base plate, ggg11056-gusset plates 6 mm thick, ggg11055-ms angle iron 40mm x 40mm x 6mm 23 mtr in length at 3.5 kg per mtr, ggg11054-ms angle iron 50mm x 50mm x 6mm 33.8 mtr in length at 4.5 kg per mtr, ggg11053-weld mesh 75 x 25 mm of 6g to 10g, ggg11052-broken granite metal 10 mm, ggg11051-broken granite metal 12.5 mm, ggg11050-mathi ornandi wood scantling, ggg11049-hom of machinaries for planing, ggg11048-add cutting and other wastage 5percentage, ggg11047-mathi ornandi wood planks for panels 25 mm thick, ggg11046-add providing and removing scaffolding at 3percentage on labour, ggg11045-painter class i, ggg11044-add wire brush fine steel wool putty sand paper at 3percentage on cost of paint, ggg11043-ready mix primer paint (ready mix red lead paint), ggg11042-add, ggg11041-welder grade i, ggg11040-fitter class i, ggg11039-z section, ggg11038-reeded glass 2 mm thick, ggg11037-tw beading for fixing glass, ggg11036-stays, ggg11035-hinges 5 inch heavy duty, ggg11034-handles, ggg11033-ms clamps, ggg11032-mullion section, ggg11031-t section, ggg11030-add handling loading and unloading at 1percentage on material, ggg11029-burnt bricks class 35 (non modular), ggg11028-binding wire, ggg11027-tmt bars fe 500, ggg11026-add watering charges at 1 percentage on labour, ggg11025-add sundries charges at 1 percentage on labour, ggg11024-stone chistler class ii, ggg11023-mason class ii (with tools), ggg11022-mason class i (with tools), ggg11021-mixer (concrete small used in culvert), ggg11020-boulders, ggg11019-bond stone 20 x 20 x 45 cm, ggg11018-size stone 20 x 20 x 25 cms, ggg11017-hom of vibrator 0.71 days, ggg11016-plasticizer or super plasticizer, ggg11015-add sundries charges at 2 percentage on material, ggg11014-casurina poles 100 - 150 mm, ggg11013-add handling loading and unloading at 2percentage on material, ggg11012-casurina poles 75 - 100 mm dia, ggg11011-jungle wood runners and planks, ggg11010-silver oak or equivalent planks 38 mm thick, ggg11009-add watering charges at 1 percentage on material, ggg11008-mixer (concrete) - 1 cum capacity, ggg11007-portland cement, ggg11006-coarse sand (zone iii), ggg11005-broken stone aggregate 12 mm to 10 mm size, ggg11004-broken stone aggregate 20 mm size, ggg11003-broken stone aggregate 40 mm size, ggg11002-over head & other miscellaneous charges, ggg11001-add sundries charges at 1 percentage on material

Paper Trimmer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government/Public Sector