Latest partical board Tenders | Government partical board Tenders

CTN :41331583

20 Aug, 2025 NA

Satna - Madhya Pradesh

Tender For tender for supply of raw material - iron cutter blade 4inch , ply 8x4 thickness 4mm , ply 8x4 thickness 6mm , ply 8x4 thickness 8mm , ply 8x4 thickness 10mm , ply 8x4 thickness 12mm , ply 8x4 thickness 19mm , sunmica sheet size 8x4 thickness 1mm , fevicoal sh , fevicoal sr , nails 1x1/2inch 16no , nails 1inch 17no , nails 3/4inch with head , pixaxe handle , spade handle , partical board 8x4 thickness 19mm , mdf board 8x4 thickness 12mm , sand paper roll 40no , sand paper roll 60no , sand paper roll 80no , sand paper roll 100no , tarpin , thiner normal , paint asian (colour as per buyer choise) 1/2lit , paint asian (colour as per buyer choise) 1lit , paint asian (colour as per buyer choise) 4lit , circular blade , cotton cloth , cotton waste

CTN :41299660

16 Aug, 2025 6.00 Lacs

Tawang - Arunachal Pradesh

Tender For supply of wire nails (q4) , wood screws (q3) , varnishes or shellac varnish as per is 347 (q3) , plywood bwr 8 ft by 4 ft by 12 mm , plywood bwr with 3 ply 8 ft by 4 ft by 16 mm , foam sheet 6 ft by 3 ft by 75 mm , plywood bwr 8 ft by 4 ft by 3mm , plywood bwr 7 ft by 3 ft by 12 mm , prelaminated mdf board 8 ft by 4 ft by 12mm , foam cushion 530 by 530 mm with tapestry cloth 32 mm density , ply wood commercial one side teak face 9 ft by 4 ft by 6 mm , prelaminated particle board 8 inch by 46 inch by 18mm , prelaminated mdf board 8 ft by 4 ft by 18mm , paint synthetic enamelled olive green , teak wood stiffner 1 inch by 1 by 2 inch 2 mtrs long , touch wood , prelaminated particle board 9 ft by 6 ft by 18mm , teak wood beading 3 by 4 inch by 1 by 2 inch round 2 mtrs long , elbow 3 way gi 32 mm , legs gi charpoy 32 mm 350mm , long rail 32 mm gi 1800mm , primer , fevicol , short rail 32 mm gi 900mm , french polish , cloth malmal 600 mm width , paint synthetic enamelled black , paint brush 100 mm , termite wood preservative , paint brush 50 mm , tack cut nails 20 mm , paint brush 25 mm ) /bid number : gem/2025/b/6519296 * /dated: 01-08-2025 & & / bid document 1 / 37

CTN :41277251

12 Aug, 2025 50.00 Lacs

Kota - Rajasthan

Tender For supply of furniture at kda office kota (arc) - supply of chair made from ms frame (with powder coated two or more coat painted, 25mm round pipe with 5.300 kg per 20 feet length) with 40 density cushion set & back matty cloth of height 83cm, seat 45 cm x45cm height of seat 45cm without arm as direction of engineer incharge., supply of 4 x2 table with ms frame (with powder coated two or more coat painted pipe frame 6.50kg/per running 20 feet) with 18mm thick mdf board with teak wood beading & edge rounding as direction of engineer incharge., providing revolving chair having following specifications : seat/back assembly : the seat is made up of 12mm thick pressed plywood, upholstered with fabric and moulded polyurethane foam the back is made up of two piece injection moulded form. the inner frame is upholistered with mesh fabric and mounted on the main assembly. the back has adjustable lumber support for achieving comfortable seating posture.back size : 460mm (w) 580mm (h)seat size : 500mm (w) 480mm (d)overall height : 1010mm to 1110mm (h)polyurethane foam : the polyurethane foam is moulded with density = 48+/-2kg/m3.upholstery : fabric/mesh sample and colour to be approved by engineer-in-charges., supply of visitor chair with pu arm ms frame (with powder coated two or more coat painted, 25mm round pipe with 5.300 kg per 20 feet length) with 40 density cushion set & back matty cloth of height 83cm seat 45cmx45cm height of seat 45cm as direction of engineer incharge., overhead rack 3 x15"x12" with 22 gauge sheet partitions with sliding doors as direction of engineer incharge., locker shelf 66" x22"x20" with 22 gauge whole body (4 nos drawers good quality locking system) as direction of engineer incharge., table with glass on top with 4 nos drawer of size 45x45 cm with mdf board (thickness of top of mdf board 30mm, vertical side 18mm, drawer 18mm) 4 nos. drawer height 55 cm on one side, good quality locking system, laminate with teak wood beading & edge rounding, three sided covered top glass 8 mm thick as direction of engineer incharge.8x4, 6x3, side table size 3.5x1.5x2.5 with key board drawer, one side 4 nos drawer with mdf board (thickness of top of mdf 18mm, vertical side 18mm with 1 mm thick laminate with teak wood beading & edge rounding, three side covered with 8 mm thick top glass as direction of engineer incharge., providing & fixing of executive medium back revolving chair having following specification : seat/back, assembly: the seat/back are made up of 12mm thick hot pressed plywood, upholstered with fabric and moulded polyurethane foam. the back foam is designed with contoured lumbar support for extra comfort.back size :520mm (w) 750mm (h)seat size :520mm (w) 520nn (d)overall height : 1270mmpolyurethane foam : the polyurethane foam is moulded with density = 45+2kg/m3upholstery : fabric/leatherettearm rests: the one-piece of armrest in "d" shape made up of polypropylene sample and colour to be approved by engineer-in-charge, supply of 3 x2 computer table with ms frame (pipe frame 6.50kg/per running 20 feet) with 18mm thick mdf board with teak wood beading & edge rounding, provision of cpu, keyboard tray & ups under table three side covered as per direction of engineer incharge., almirah 3x6 (lockable type-1) 78" x36"x18" with 22 gauge whole body (5 nos partitions ) one portion will have provision of two lockers sample and colour to be approved by engineer-in-charge, almirah 3x6 78" x36"x18" with 22 gauge whole body (5 nos partitions ) sample and colour to be approved by engineer-in-charge, supply & installation conference table size 1000l*6000*750h in mm, table top made of 36mm thick particle board round post form top with 2mm thick pvc edge banded finish with as per approved laminate shade, connection tops of conference table made of mdf board of size 600w x 600d x 25mm round postform pasted with 0.4mm thick black pvc membrane on board, gable - ends of the table made of 25mm thick p

CTN :41280617

14 Aug, 2025 NA

Howrah - West Bengal

Tender For led safety poster with light, size: 3 ft. x 2 ft., base: clip on photo frame typically consist of a clear front sheet (often polycarbonate or acrylic), a backing material (like mdf or plastic, and matal clips to hold the places together and secure the photo, light: backside led light with smps. it should be approve d by the office before supply. [ warranty period: 30 months after the date of delivery ]

CTN :41280620

14 Aug, 2025 NA

Howrah - West Bengal

Tender For safety poster without light, size: 2 ft. x 1.5 ft., base: clip on photo frame typically consist of a clear front sheet (often polycarbonate or acrylic), a backing material (like mdf or plastic, and metal clips to hold the places together and secure the photo. it should be approved by the office before supply. [ warr anty period: 30 months after the date of delivery ]

CTN :41242650

08 Aug, 2025 NA

Srinagar - Jammu And Kashmir

Tender For supply of valve 20mm , dol starter 2 hp , dol starter 5 hp , rubber water hose 25 mm , ci tail socketed 150mm , rubber gasket 150 mm dia pipe , graphite of size 15mm , graphite 12mm , ci collar split 100 mm , nuts bolts , rubber coupling tc 15 , rubber gasket 100 mm pipe dia , nut and bolts with washer off size , nuts and bolts , rubber gasket 3 mm thick , ms plug 40mm , ms plug 50mm , ms plug 25mm , sheet glass 3 point 5 mm , pvc pipe swr , ss brakect with end cap , glass sheet 5 point 5 mm , pvc tank cover 500 ltr , pvc door seal 900 mm , glass corner , cp jet sprey , glass shelf for whb , ms bracket for whb , cp grating 125 mm , gi wire mesh , alu door stoper 125 mm , ms butt hinges 100 mm , ss wire sloth 0 point 36 mm , plywood bwp , pvc connection pipe 750 mm , aluminium butt hinges 100 mm , pvc corrugated urinal pipe , gun matel gate valve 20 mm , frosted glass pane 3 mm , ptmt graring 100 mm , pvc grating 150 mm , cp grating 150 mm , nails of different size , hasp and stapals , m seal 100 , pvc long bend 32 mm , cp urinal spreader , ss wire cloth 0 point 36 mm widhtof aperture 1 point 40 mm , ss but hinges 125 mm , ss hasp and staples 150 mm , pinao hinge continiousms bright finish or electrogalvanised 40mm flap , teflon tape 12 mm width 15 mtr , dhaga for plumbers thread cotton , drapery rod 28 mm dia ms powwer coted , mils steel screw full theaded 35 mm 100 nos , ms plug 15 mm , pvc garting 125 mm , ms plug 20 mm , ms butt hinges 75 mm midium , mild steel screw full threaded 50 mm , paint brush 4 inch , ss funel suitable for 25 mm curtain rod , spindle half cut for mixer , ss 6 pin bathroom cloth hanger , geyser bolt , pvc rawal plug , chinese black screw size 50 mm long , chinese black screw size 35 mm long , chinese black screw size 30 mm long , nails woodn window glass , chinese nails size 30 mm long , chinese nails , chinese nails size 38 mm long , chinese nails size 3 inch long , 12 mm thickness designer partical board , 5 mm thick 5 nos of ply commrical plywood , plywood commrical , curtain rod 3 mtr long ss , plywood commerical , partical board , 300 mm long helical door spring rat rod pattern lock for almirah large med two holes, lock for almirah med large 4 holes, handle lock for almirah, handle for almirah large med, ppcp handle for chair visitors steel set of two, "top for table office clk steel of size 1200 x 610 mm with standard prelaminated particle board 18 mm thick of teak shed with balancing white lamination on other side 4 mm thick beading of teak wood shall be provide all around top ", "top for teapoy varandah of size 750 x 450mm made out of prelaminated particle board 18 mm thick of teak shed with balancing white lamination on other side 4 mm thick beading of teak wood shall be provide all around top ", steel furniture lock for drawer/lockers with dulicate key 6 lever, "top for table dining 6 pers of size 1500 x 900 mm made out of pre laminated particle board 18 mm thickness of teak shed with bal white lamination on other size 4 mm thick beading of teak wood shall be provide all around the top ", foam cushion 32 density size 555 x 530 x 100mm duly covered with tapestry cloth of super quality, plywood one side teak commercial 8' x 4', 6 mm thick, plywood commercial exterior grade of size 2440 x 1220 x 12 mm thickness with one side teak face, top for table peg of size 450 x 300 mm made out of prelaminated particle board 18 mm thickness of teak shed with balancing white laminations //bid details 2 / 137

Partical Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors