Tender For providing and fitting fixing of electrical accessories, spare of panel board of different water supply schemes at different locations under dws sub-division, belonia during the year 2025-26. - providing and fitting fixing of spare contact kits without coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., providing and fitting fixing of standard operating coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., supplying and fitting fixing of 4 pole ac control contactor (nhd series) suitable for bch made starter (standard coil voltages are 24, 110, 220/240 & 380/415 v, ac hz)., supplying and fitting fixing of 3 pole power contractor (type-mnx) suitable for 10 hp to 25 hp motor.mnx-25 (for l&t made starter), supplying and fitting fixing of pneumatic timer pn type delay relay-electro pneumatic) suitable for delay of time upto 30 sec. (bch made)., supplying and fitting fixing electronic timer type st-100 (l & t make) suitable for 240/300/415v, 50 hz having ranges for 3-30 secs/12-120 secs., supplying and fitting fixing of single phase preventer on delay 2 sec off delay 7 sec 65 vac asymmetry., providing & supplying of kit-kat rewireable porcelain fuse (cut-out) carrier & base of havells made (delux quality)., a) 63 amps/415 volt, b) 100 amps/415 volt, supplying and fitting fixing of 3 pole power contractor (type-ml) suitable for 10 hp to 25 hp motor.type ml-2 (for l&t make starter), supplying and fitting fixing of thermal timer type gt-200 (l & t make) suitable for 230/250v, 360v, 400/440v, 50 hz for 5-18 secs., supplying and fitting fixing of thermal overload relays mn2 type (directly operated& direct mounting on mnx 9-40 contactor) of l & t made. (suitable for ml/mnx type)., a) for relay range 9-15 a., b) for relay range 14-23 a., c) for relay range 20-33 a., supplying and fitting fixing of thermal overload relays (directly operated& direct mounting on ml-2/3 contactor) having relay range 9-14a/13-21a of l & t made. (suitable for ml-2/ml-3 type)., supplying and fitting fixing of citation-m overload relays (direct mounting with built in single phase protection) having relay range of bch made., a) for relay range 8.9-13.5 a., b) for relay range 13.2-30.00 a/17.4-24.00 a., c) for relay range 22.00-30.00 a., providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) gamair wood/ plywood pannel board for fitting fixing of electrical items, in/c 2 nos ms angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the engineer-in-charge., providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the engineer-in-charge., providing and fitting fixing heavy duty box type (resin filled) power factor correction capacitor l & t make etc. complete as per specification and direction of the engineer-in-charge.i) 5-15 kvar 440 v, supplying isi marked/ taparia make tools for water supply scheme., i) sly wrench, ii) screw driver, iii. pipe wrench, iv. plier, v. hexo frame with blade, providing and fitting fixing of moving iron type, range 0-500 v, 96 mm x 96 mm size ac volt meter ( l & t / ae make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the engineer-in-charge., providing and fitting fixing of moving iron type, range 0-100/0-200 amp, 96 mm x 96 mm size ac amps meter direct reading type ( l & t / ae make) with selector switch and ct coil as a electrical instrument of the pannel board as per specification and direction of the engineerin-charge., providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses), tripl
Tender For corrigendum : supply of shore a hardness tester , electronic balance , reversion test apparatus , vernier calliper , measuring tape , steel scale , micrometer ball point analogue , micrometer analogue , micrometer digital , micrometer ball point digital , muffle furnace , cold chamber , vicat softening point test apparatus , oxidation induction tester , oxidation induction tester flow meter of o2 , oxidation induction tester flow meter of n2 , carbon black contents test apparatus , carbon black contents test apparatus flow meter of n2 , melt flow index apparatus , digital thermo hygrometer , digital humidity chamber , environmental chamber , hydraulic press tempareture controller , glass thermometer , bursting strength tester 1 , bursting strength tester 2 , digital stop watch , std calibration glass tube for bendsten smoothness and porosity tester , standard reference gloss tile , gloss meter , standard reference brightness tiles , brightness opacity and colour test apparatus , electronic reflectance meter , paper thickness apparatus dial indicator , thickness micrometer digital , folding endurance tester , digital temp. controller with sensor for water bath , hydrostatic pressure test apparatus 02 stations , hydrostatic pressure test apparatus 04 stations , irhd hardness tester digital dial gauge , colour matching cabinet , counter meter pilling test apparatus , digital temp controller with sensor j type launder o meter , bench type thickness gauge , weight perspirometer , tensile strength tester , tensile testing machine , universal testing machine , crock meter , multi cell ageing oven , toe impact tester for safety shoes , sole adhesion tester , sole leather grain crack tester , water vapour permeability tester digital timer , heat insulation tester digital temperature cont. cum indicator with sensor , heat insulation tester digital temperature cont cum indicator with sensor , leakage proofness tester dial pressure gauge , leakage proofness tester digital timer , cold ross flex tester digital temperature controller , bally water penetration tester , digital temperature controller in deep freezer cold insulation tester , bally flexometer tester dig counter meter , veslic rub fastness tester dig counter meter , din abrasion tester dig counter meter , martindale abrasion tester dig counter meter , full shoe flex tester dig counter meter , bennewart flexometer dig counter meter , bata belt flex tester , shoe lace to eyelet abrasion tester , resistance to hot contact dig temperature controller cum indicator with sensor , blade cut resistance tester , de mattia flex tester , low temp vamp flex tester , velcro fatigue tester , steel plate flex tester , water absorption and desorption permometer dig timer , dynamic water resistance tester , fibre board flexing tester , ankle protection tester , compression cum nail penetration and energy absorption for seat region , digital lastometer , rigidity tester , precision thickness micrometer , slip resistance tester for shoe
Tender For open tender document for e-procurement of laboratory equipment (soil, aggregates, cement, reinforcing bar, concrete test equipment, water, geo-textile and geogrid) for material testing laboratory of iahe - soil, unconfined compressive strengthcompression device with digital load frame: hydraulic proving ring, dial gauge vernier callipers, timer, oven, weighing balance, shear strength vane shear apparatus, grain size analysis as per is:2720 (part- iv)pipette apparatus (i) sampling pipette (ii) glass sedimentation tubes (iii) weighing bottles (iv) deleted (v) stirring apparatus (vi) sieves -2mm, 425umm , 75umm is sieves (vii) deleted, specific gravityhydrometer apparatus: two 1000 ml graduated cylinders, dispersing agent solution containing sodiumhexa-metaphosphate, dessicator and centimetre scale., shrinkage limit testfull set of equipments 1.) evaporating dish of porcelain, 2.) spatula and straight edge, 3.) balance-sensitive to 0.01 g minimum.4.) shrinkage dish. circular, porcelain or non-corroding metal dish, 5.) glass cup. 50-55 mm in diameter and 25 mm in height,6.) glass plates. two, 75x75 mm one plate of plain glass and the other prongs, 7.) thermostatically controlled oven,8.) wash bottle containing distilled water, 9.) graduate-glass, with capacity of 25 ml. 10.) mercury., sand equivalent value(i) graduated cylinder (ii) irrigator tube (iii) siphon assembly (iv) weighted foot assembly (v) measuring can (vi) sieve -4.75mm (vii) funnel (viii) 4- litre bottle (ix) flat pan (x) timing device (xi) sand equivalent shaker, ph test -electronic method(i) ph meter (ii) digital balance 300 gm capacity-sensitive 0.001gm (iii) 100ml glass beaker -3nos. (iv) volumetric flask-500ml -nos. (v) wash bottle-100 ml (vi) mortar with rubber covered pestle, aggregates, polished stone value (i) accelerated polish machine mounted on firm ,level and non resilient base of stone or concrete (ii) road wheel (iii) means for rotating road wheel (iv) means for bringing the surface of a rubber-tyred wheel of 20 cm diameter and 5 cm breadth to bear on the stone surface of the road wheel with a total load of 40 kg. (v) means to feed the sand and water at a uniform rate (vi ) means to feed the emery powder and water at uniform rate (vii) friction tester: is: 2386 part 4 as per specification of rrl uk (viii) 25 kg hard siliceous sand (ix) emery powder 5 kg, alkali aggregate reactivitymortar bar method: scales, weights, sieves, glass graduates, specimen moulds, mixing bowl, tamper, trowel, containers, length comparator, alkali aggregate reactivity chemical method:1. electronic balance2. pulveriser3. reaction container, reagents, glassware, petrographic examination 1. geological hammer2. petrographic microscope3. screen confirming to is sieve4. digital balance5. portable handheld cutting machine6. hand lens7. glass sides etc., deleterious material & organic impuritiessedimentation pipette: a watertight screw-topped glass jar, 1000 ml measuring cylinder, chemicals, containers, sieves, cement, soundness (autoclave apparatus)graduated glass cylinders, moulds, autoclave, length comparator, compaction (mortar cube vibrator), fineness (blaine air permeability apparatus), ph meter ( 2 in nos.), reinforcing bar (steel), reinforcing bar (steel) universal testing machine,to determine unit weight, yield strength,, proof stress, ultimate tensile strength, % elongation, bend and re-bend test, concrete test equipment, vibrating table 1mx1m(full set of equipments), needle vibrator ( 2 in nos.), permeability, dry shrinkage (shrinkage apparatus) ( 2 in nos.)(full set of equipments), air content (air entrainment meter apparatus)(full set of equipments), durability (rapid chloride ion permissibility apparatus), depth of penetration (water permeability apparatus) ( 2 in nos.)(full set of equipments), water, physical analysis of water, geo textile and geogrid, pull-out resistance of geotextile /geogrid
Tender For corrigendum : kerala water authority funds deposit supply and installationof lab equipments for maintaining quality standards in various schemes under p h division palakkad - supply of lab equipments to various wss and rwss under p h division palakkad, od114374/2025-2026:supply and installation of jar test apparatus with the specifications are (1). number of stirres - 6 minimum, (2). rpm- 25 to 200 rpm or better, (3). capacity of single stirrer unit- 1 l, (4). control -digital control (digital timer & r.p.m counter), (5). stirrer paddle material (with appropriate corrosion protective coating) - stainless steel, (6). power single phase (220 - 240 volts), (7). illumination -fluorescent tube ; llumination should not contribute heat to the system, (8). warranty period -2 years. etc; complete., od114368/2025-2026:supply , installation and calibration of digital nephelo turbidity meter with the specifications are ; (1). range : 0 to i000ntu , (2). range selection : manual /automatic , (3). resolution : 0.1 ntu or better , (4). accuracy : +or- 3% or better, (5). calibration : 4 points minimum (manual/auto selection) , (6). light source : led/tungsten halogen lamp , (7). detector : photodiode , (8). display : lcd/led , (9). power : 230v +or- 10 % , 50 to 60hz, (10). accessories: matching test tubes(4 nos minimum ) and light shield, l000ntu solution 500 ml minimum, (11). instrument manual with specification details(hard copy) , (12). warranty : 2 years for the entire instrument etc ; complete., od114367/2025-2026:supply , installation and calibration of bench top ph meter with the specifications are (i). ph - range : 0.00 to 14.00 ph or better, resolution : 0.01or better, accuracy : +or- 0.02 ph or better, calibration points : 3 points minirnum, buffer options : : standard buffers (ii). mv - range : 0 to +or- l999mv, resolution : i mv or better, accuracy : + or - 1 mv or better (iii). temperature - 0.0 to 99 degree c or better, resolution : 0.1 degree c or better, accuracy : + 0.5 degree c or better (iv). electrode qpecification: single junction ,body-plastic /unbreakable, gel filled electrode atc probe and electrode stand should also be provided. (v). meter features - 1) lcd i led display, 2) dual display of ph or mv with temperature , 3) with auto buffer recognition, 4) off set/slope should be displayed , 5) power 230v +or - 10%, 6) buffer solutions 7 .0, 4.0, 9.2 ph (100m1 minimum) should be provided, 7) should provide all accessories for smooth functioning of the equipment, 8) hard copy of user manual with instrument specification, 9) warranty: 1 year for entire insruments etc; complete., od114377/2025-2026:supply of laboratory equipments including electronic weighing balances,etc. with 2 year warrenty including conveyance charges, od114750/2025-2026:supply and installation of digital conductivity meter 308 with the specifications are (i). conductivity - 1). range : 0.1 us to 100 ms (6 decadic ranges) , 2). accuracy : +or - 1% of fs + or - digit. 3). resolution : 0.001 micro.s (ii). tds - range : 0.1ppm to 100 ppt (6 decadic ranges ), accuracy : + or - 1% of fs (iii). temperature - temperature : 0 degree c to 100 degree c( auto / manual ), resolution : 0.1 degree c. , accuracy : + or - 0.2 degree c. etc; complete with 2 year warrenty, od114370/2025-2026:supply of buffer solution for ph 4 and ph 7(500ml bottle)
Tender For supply of botany lab equipment - procurement of botany lab equipment, modular laboratory workstation (with sink, switches) specification steel/ iron made, total size 500sq feet, real time electrophoresis system, with power supply specificationvertical slab gel system polyacrylamide gel, craft s micro imaging system specificationimported camera eyepiece with computer or laptop connectivity with usb port, entomological dissecting microscope specificationlens 83 mm dia. eye-pieces 10x and 20x, donna- pattal making machine specificationfully automatic double die crank machine, raw material banana leaf, palash leaf, etc, 220v, 1hp motor, mild steel , imported e-learn interactive white boards specification75 inches 4k uhd touch screen led tv ultratouch display interactive flat panel monitor(3840 x 2160 pixels) , horizontal laminar flow specification4 2 2 (stainless steel body) 90 lt./per hepais 90 + 20 fpm noise level in very low, working fluorescent light, pcr teaching kit specificationtest efficient and easy to use, colony counter specification4 digit, microlit micropipette specificationmultichannel 8 channel fully auto removable, dahl digestion unit specificatonaluminium heating block and fumes extraction system, digestion of plant, soil sludge, food grams, processing 100 ml tubes, leaf area meter specificationfully automatic, portable water/soil kit specificationph mv conductivity, tds salinity, turbidity, d.o. and temp., magnetic stirrer with hot plate specification2 liters capacity, water bath rectangular specification16" 12" 4" 12 holes of 3" diameter, seed germinator specificationsingle chamber, suitable for conducting experiments on variety of seeds under different conditions of temp. and humidity. inner size 555 910 605 mm s.s. interior having 6 nos. adjustable shelves. tabular heaters are fitted. windowed front glass door outer inner full view acrylic door enabling to keep temp. and humidity level un-interrupted. full feature digital temp. controller cum indicator with voltmeter stainless steel with 14 trays., tissue culture rack specificationfitted with switches and 0-24 hrs. timer made of mild steel duly painted. rack size 48 21 (depth) is covered with thick ubreakableplexi-glass. each rack fitted with 4 fluorescent tubes and four bulbs. it is a unit with four shelf. each shelf with one u.v. tube for sterilization purpose., electronic balances digital specificationkea-210 200 gm 0.001 gm (1 mg) 80 mm , laboratory bod incubator specification12 cu.ft. 900 650 550mm s.s inner capacity 340 liter, fully automatic fume hood specification1500x750x2100mm, universal phase contrast cum dark field/bright field binocular research microscope specificationequipped with double slidder unit and condenser system which enables bright field, dark ground and phase contrast observation by a simple change over procedure. this microscope is designed latest phase techniques for most convenient observation of all colourless and transparent specimens and living bacteria etc. wihout staining. provides excellent contrast and a perfect flat image. coarse motion with universal locking device and highly sensitive fine focusing reading to 0.002 mm. supplied with imported slider phase contrast cum dark field equipment having phase annuls with abbe condenser and set of phase plates and provision for accurate centering. supplied with din standard optics, fluorescence microscope (imported-flurex) specificationepi-fluorescence arm with butyl in two/four (option) filters (uv, v, b, g) dichoric mirror and barrier filters. wf 10x/fov 20 mm (paired). objective plain achromatic objective 4x, 10x, 40x, 100x. fluorescence objective 4x, 10x, 40x, 100x. standard interference filters 1. b excitation (400-490 nm); 2. g excitation (510-550 nm). optional 1. uv excitation (300-400 nm); 2. v excitation (395-415 nm). transmitted tungsten halogen lamp. fluorescent sources 100 w mercury lamp. complete with instruction manual
Tender For supply of various types of led and lighting material for emd 3 lighting & bop at sikka. - led tube light 4 ft long,20 watt, complete flame proof led light fixure with glass having light equivelent to 125 w hpmv conventional fitting, led flood light fixture 150w, led street light fitting - 90 watt, led flood light 240w., 80-watt led lamps industrial well glassed luminari fixture, l&t make complete contactors type: -mnx 70, cat.no.:-cs 94134, capacity: 70 amp, ac - 3,coil voltage: 240 v ac - b 000,aux. contacts:- 2 no + 2 nc, power contactor, tp, ac-3 duty, coil voltage-240 v ac, type: mnx-40, gelco make electronic digital time/quartz timer model no-dts 502, capacity: 25 a, 230 volts, single phase-n for street light on/off