Latest paved block Tenders | Government paved block Tenders

CTN :39774606

26 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras corrigendum : supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold, ambuja,ultratech,acc,jk,dalmiya under job no 2633 ug comd bkr as per store list attached , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 63-90 mm graded , stone for rr masonary less than 6 inch , mild steel bars of size 8mm dia conforming to is 432 part i 1982 maketata,sail,jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , mild steel bars of size 12 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , mild steel bars of size 16 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , ms binding wire , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , wooden log for props of size 3.2 mtr long 100mm dia. , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric as per store list attached , priming surfaces and applying bitumen as a primer in base of app membrane , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms rhs of size 80x40x3.2 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms rhs of size 50x25x2.9 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed maketata,sail,jsw for ms rhs of size 96x48x3.2 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 8mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 10mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 12mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed maketata,sail,jsw for ms angle of size 40x40x6 for cleat , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed. , ms flat iron 40x5mm thick for wind tie maketata,sail,jsw , iron welding rod confirming to is 814-2002 isi marked 3.15mm thick 100 nos pkt , water proofing compoundconfirming to is 2645-2003 make-pidilite,dr fixit, fevicol , quick setting compound makepidilite,fevicol,quick fix , cement based paint snowcem make-berger,asian,nerolac , oil bound distemper washable quality of proprietary brand of makenerolac,berger,asian , birla white wall care putty water resistant white cement make-nerolac,berger,asian , ppgi roofing sheet 10 feet x 3 feet long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4-5 micron epoxy primer and as per store list att , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa make-uniix,jindal mectec or eqv brand , synthetic paint enamelled og colour confirming to is 5- 2004 make-berger,asian,nerolac , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed make-jindal,hindalco aluminium section weighing 0.55 kg oblique mtr. , anodised aluminium window triple track 2 track glass and 1 track wire mesh with frame of size 1000mm x 1000mm including all as per store list attached , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick thick including all fittings and as directed as per store list attached , ms anchor bolt, suitable for rcc work, 12mm dia, 300mm long with 2 washer and a nut minimum wt of each bolt and nut

CTN :40108147

30 Apr, 2025 1.38 Lacs

Kozhikode - Kerala

Tender For annual plan 2024-25, nilambur municipality, pr.no.573/25 chaliyapurath ida vazhi in ward 27 - surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m., od245020/2024_2025 (derived from dar 51.2.3) filling with quarry muck filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the cbr value of subgrade, od245021/2024_2025 providing plain cement concrete for road work cc 1:2:4 (1 cement: 2 fine aggregate: 4 course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as required including compaction, finishing and tamping etc .complete. max. size of course aggregate not exceeding 25mm , mixed in concrete mixer etc complete as per specification (i) nominal mix (1:2:4) a)materials , od245011/2024_2025 providing and fixing granite of any colour & shade for name board of required size laid over base of cement mortar 1:4(1 cement : 4 coarse sand), including all charges etc, complete at all levels, including lettering & fixing.

CTN :40083720

30 Apr, 2025 11.32 Lacs

Multi City - Karnataka

Tender For supply of matrials for constraction of swm , unit in grama panchayat jummanakatti - mgnrea-jmk add white lead paint,gasket, cement, sand for making good the wall and floor at 2% on material, mgnrea-jmk mosquito proof coupling 25mm, mgnrea-jmk special for overflow pipe, mgnrea-jmk g.i. overflow pipe 20mm dia, mgnrea-jmk m.s. holder bat clamp 32mm, mgnrea-jmk g.i. 32mm dia telescopic flush pipes with fittings specials, mgnrea-jmk c.i. / m.s. brackets for flushing cistern, mgnrea-jmk p.v.c. flushing cistern 10 ltslow level with fitting, mgnrea-jmk 100mm s or p trap, mgnrea-jmk orissa pattern of size 580x440mm with integral type foot rests, mgnrea-jmk binding wire, mgnrea-jmk tmt bars fe 500, mgnrea-jmk add brush, putty, sand paper, roller at 5% on cost of paint, mgnrea-jmk enamel paint, mgnrea-jmk unit cost as per the specification, mgnrea-jmk tools & plants and electrical charges at 2%, mgnrea-jmk add brush at 1% on cost of paint, mgnrea-jmk enamel metal paint, mgnrea-jmk add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, mgnrea-jmk ready mix primer paint (ready mix red lead paint), mgnrea-jmk hom of cutting and grinding machine, mgnrea-jmk add, mgnrea-jmk hom of welding and grinding machine, mgnrea-jmk welder grade i, mgnrea-jmk corbon electrodes, mgnrea-jmk anchor bolts 750mm, mgnrea-jmk base plate / base plate, mgnrea-jmk gusset plates 6 mm thick, mgnrea-jmk ms angle iron 40mm x 40mm x 6mm, 23 mtr in length at 3.5 kg per mtr, mgnrea-jmk mgnrea-jmk ms angle iron 50mm x 50mm x 6mm, 33.8 mtr in length at 4.5 kg per mtr, mgnrea-jmk broken granite metal 10 mm, mgnrea-jmkbroken granite metal 20 mm, mgnrea-jmk painter class i, mgnrea-jmk add brush, putty, sand paper at 2% on cost of paint, mgnrea-jmk water proofing cement paint, mgnrea-jmk add providing and removing scaffolding at 3% on labour, mgnrea-jmk solid concrete blocks (40 x 20 x 20 cms)-4.00 n/sqmm, mgnrea-jmk add handling , loading and unloading at 1% on material, mgnrea-jmk brick, mgnrea-jmkadd watering charges at 1 % on labour, mgnrea-jmk add sundries charges at 1 % on labour, mgnrea-jmk stone chistler class ii, mgnrea-jmk mason class i (with tools), mgnrea-jmk boulders, mgnrea-jmk size stone 20 x 20 x 25 cms, mgnrea-jmkmixer (concrete small used in culvert), mgnrea-jmk bond stone 20 x 20 x 45 cm, mgnrea-jmk rubble stones, mgnrea-jmk add sundries charges at 2 % on material, mgnrea-jmk bolts and nuts, mgnrea-jmk ms flat, mgnrea-jmk casurina poles 100 - 150 mm, mgnrea-jmk add handling , loading and unloading at 2% on material, mgnrea-jmk casurina poles 75 - 100 mm dia, mgnrea-jmk jungle wood runners and planks, mgnrea-jmksilver oak or equivalent planks 38 mm thick, mgnrea-jmk hom of vibrator 0.71 days, mgnrea-jmk mason class ii (with tools), mgnrea-jmk super plasticizer admixture is marked as per 9-103-1999, mgnrea-jmk add watering charges at 1 % on material, mgnrea-jmk mixer (concrete) - 1 cum capacity, mgnrea-jmk portland cement, mgnrea-jmk coarse sand (zone iii), mgnrea-jmk broken stone aggregate 12 mm to 10 mm size, mgnrea-jmk broken stone aggregate 20 mm size, mgnrea-jmk broken stone aggregate 40 mm size, mgnrea-jmk over head & other miscellaneous charges, mgnrea-jmk add sundries charges at 1 % on material, mgnrea-jmk licenced blaster, mgnrea-jmk drilling mechanic grade i, mgnrea-jmk safety fuse wire, mgnrea-jmk detonators, mgnrea-jmk special gelatin, mgnrea-jmk drilling equipment

CTN :40085821

29 Apr, 2025 7.14 Crore

Biharsharif - Bihar

Tender For rrsmp/25-26 biharsharif/03 - name of road - nh-82 soyba to masiya road , length- 8.20km .clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pices not exceeding 0.02 cumin volume and stock pilling at designated location and disposal of dismantled materials upto a lead of 1000 m,stacking serviceable and unserviceable materials separately., scarifying the existing bituminous road surface and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 100 m as per technical specification clause 301.5, construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. grading - ii, wbm grading - iii - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wh

CTN :40085824

29 Apr, 2025 9.01 Crore

Biharsharif - Bihar

Tender For rrsmp/25-26 biharsharif/02 - deepnagar to rail way station rest part,length of road - 500 mclearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification., construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing, km stone- reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703., 200 m stone- reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703., 600 mm equilateral & triangle - providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification clause 801, 600 mm circular - providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification clause 801, providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35.the finished surface to be level, uniform and free from streaks and holes. (pcc), providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on

CTN :40085825

29 Apr, 2025 14.83 Crore

Biharsharif - Bihar

Tender For rrsmp/25-26 biharsharif/04 - name of road - construction of road from nh-31 to rahui bazar (incl. 5 years maint.)clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pices not exceeding 0.02 cumin volume and stock pilling at designated location and disposal of dismantled materials upto a lead of 1000 m,stacking serviceable and unserviceable materials separately., construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 100 m as per technical specification clause 301.5, construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. grading - ii, wbm grading - iii - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished i

CTN :40085826

29 Apr, 2025 11.00 Crore

Biharsharif - Bihar

Tender For rrsmp/25-26 biharsharif/05 - name of road - repair of road from sarmera issua to brindavan road (incl. 5 years maint.), length of road - 2600 mclearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pices not exceeding 0.02 cumin volume and stock pilling at designated location and disposal of dismantled materials upto a lead of 1000 m,stacking serviceable and unserviceable materials separately., scarifying the existing bituminous road surface and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 100 m as per technical specification clause 301.5, construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. grading - ii, wbm grading - iii - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size o

CTN :39774886

23 Apr, 2025 NA

Sonitpur - Assam

Tender For bid to ras supply of cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 1989 make birla gold or ambuja or ultratech or acc or jk or dalmia , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , coarse aggregate 40 to 63 mm graded , stone boulders 9 inch to 12 inch , mild steel bars of size 8 mm dia conform to is 432 part 1 1982 tmt bar make tata or sail or jsw , water proofing compound conform to is 2645 2003 make pidilite or dr fixit or fevicol , pbs roll 20m long width of 0 point 9mtr isi marked with min weight of 34 kgs roll , gi binding wire tata sail jsw , cement base paint scowcem make berger or asian or nerolac , slack lime , painting brush 4 inch isi marked , hdpe sand bag of size15 inch x 30 inch , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger or asian or nerolac , synthetic paint enamelled og confirming to is 5 2004 make berger or asian or nerolac , thinner make nerolac or berger or asian , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw , srt 1840 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw , ismb hot rolled ms 200 x 100x 4m make tata or sail jsw , prefeb mild door steel of size 750x 1800mm double shutter outer frame isa 40x40x6mm and door shutter isa 35x35x5mm isa 30x30x3mm 0 point 75 m x 1 point 8 m double shutter tata sail jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make tata or sail or jsw , loop holes 780 x 300 mm make tata or sail or jsw , loop holes 1000 x 300 mm make tata or sail or jsw , loop holes 1250 x 350 mm make tata or sail or jsw , ventilator steel 600x450 mm isa 30x30x3mmand 1 mm isa 35x35x6mm and tower bolt 8mm dia 75 mm long make tata sail jsw , wooden plank for shuttering ii class wood of size 3 x0 point 3 x0 point 026 m , wooden scantling various size , nails various sizes , air terminatoin single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block made of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw , aluminium strips 25x3mm , galvanised iron strip 32x6mm , funnel fitted with 20mm dia gi pipe 1 point 5m long make jindal or tata or kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side , ci earth pit cover of size 300x300x6mm with angle of size 20x20x3mm thick with ms frame , charcoal , salt , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto or polycab or finolex

CTN :39774887

23 Apr, 2025 NA

Sonitpur - Assam

Tender For bid to ras supply of cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 1989 make birla gold or ambuja or ultratech or acc or jk or dalmia , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , coarse aggregate 40 to 63 mm graded , stone boulders 9 inch to 12 inch , mild steel bars of size 8 mm dia conform to is 432 part 1 1982 tmt bar make tata or sail or jsw , water proofing compound conform to is 2645 2003 make pidilite or dr fixit or fevicol , pbs roll 20m long width of 0 point 9mtr isi marked with min weight of 34 kgs roll , gi binding wire tata sail jsw , cement base paint scowcem make berger or asian or nerolac , slack lime , painting brush 4 inch isi marked , hdpe sand bag of size15 inch x 30 inch , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger or asian or nerolac , synthetic paint enamelled og confirming to is 5 2004 make berger or asian or nerolac , thinner make nerolac or berger or asian , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw , srt 1840 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw , ismb hot rolled ms 200 x 100x 4m make tata or sail jsw , prefeb mild door steel of size 750x 1800mm double shutter outer frame isa 40x40x6mm and door shutter isa 35x35x5mm isa 30x30x3mm 0 point 75 m x 1 point 8 m double shutter tata sail jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make tata or sail or jsw , loop holes 780 x 300 mm make tata or sail or jsw , loop holes 1000 x 300 mm make tata or sail or jsw , loop holes 1250 x 350 mm make tata or sail or jsw , ventilator steel 600x450 mm isa 30x30x3mmand 1 mm isa 35x35x6mm and tower bolt 8mm dia 75 mm long make tata sail jsw , wooden plank for shuttering ii class wood of size 3 x0 point 3 x0 point 026 m , wooden scantling various size , nails various sizes , air terminatoin single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block made of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw , aluminium strips 25x3mm , galvanised iron strip 32x6mm , funnel fitted with 20mm dia gi pipe 1 point 5m long make jindal or tata or kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side , ci earth pit cover of size 300x300x6mm with angle of size 20x20x3mm thick with ms frame , charcoal , salt , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto or polycab or finolex

CTN :39774726

21 Apr, 2025 NA

Sonitpur - Assam

Tender For bid to ras supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 1989 make birla gold or ambuja or ultratech or acc or jkj dalmia , stone boulder 9inch to 12inch , coarse aggregate 40 to 63mm , coarse sand free from vegetation , coarse aggregate 20mm graded . , coarse aggregate 40mm graded , mild steel bars of size 6 to 8 mm dia conform to is 432 part 1 1982 tmt bar make tata or sail or jsw , water proofing compund conforming to is 2645 2003 make pidilite or dr fixit or fevicol , pbs roll 20m long width of 0 point 9mtr isi marked with min weight of 34 kgs per roll , gi binding wire tata or sail or jsw , cement base paint scowcem make berger or asian or nerolac , slack lime , painting brush 4inch isi marked , hdpe sand bags khaki colour of size 30inchx15inch inside laminated interlocking stiched weight of the each bag as per ts , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger or asian or nerolac , synthetic paint enamelled og confirming to is 5 2004 make berger or asian or nerolac , thinner make nerolac or berger or asian , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw , srt 1840 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts bolts incl one coat of red oxide make tata or sail or jsw , ismb hot rolled ms 200 x 100 4m make tata or sail or jsw , prefab mild steel door of size 750x1800mm double shutter outer frame made out of isa 40x40x6mm as per ts , mild steel bars of size 6 to 10 mm and above dia conforming to is 432 part i 1982 make tata or sail or jsw , loop holes 780 x 300 mm make tata or sail or jsw , loop holes 1000 x 300 mm make tata or sail or jsw , loop holes 1250 x 350 mm make tata or sail or jsw , ventilator steel 600x450mm will be fabricated using isa 35x35x6mm for outer frame and isa 30x30x3mm as per ts , wooden plank for shuttering ii class wood of size 3 point 0 x0 point 3 x0 point 026 m , wooden scantling various size , nails various sizes , air terminatoin single pointed aluminium rod 12mm dia and 300mm long , testing point terminal block made of gun metal phosphorus bronze size 75x75x25mm drilled and screwed as per ts , aluminium strips 25x3mm , galvanised iron strip 32x6mm , funnel fitted with 20mm dia gi pipe 1 point 5m long make jindal or tata or kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side , ci earth pit cover of size 300x300x6mm with angle of size 20x20x3mm thick with ms frame , insulating pvc block 75x75x30 mm with insulating clamp nut bolt make presto or polycab or finolex , charcoal , salt

Paved Block Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors