Latest pc pole Tenders | Government pc pole Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

State Government

CTN :38334676

19 Dec, 2024 1.41 Lacs

Purulia - West Bengal

Tender For corrigendum : painting of 33kv and 11kv structure with pcc pole, rail pole, ct, pt and grid cable structure at arsha sub station under purulia division

CTN :38542573

23 Dec, 2024 NA

Aligarh - Uttar Pradesh

Tender For corrigendum : supply of pcc pole 8.5 mtr. long,stp pole 11 mtr. long,stone pad ,11 kv v type cross arm,11 kv cross arm clamp with n&b,11 kv pin insulator,11 kv g.i. pin with n&b,f-bracket,earthing of pole,acsr rabbit conductor,acsr weasel conductor,11 kv xlpe cable 3x185 sq.mm.,11 kv cable jointing kit o/d for 3x185 sq.mm. cable,stay set complete,t-off channel,clamp for t-off channel,11 kv disc insulator,11 kv disc fitting,concreating of pole,danger plate complete,barbed wire gi 1/2 per pole,dismantling and removal of existing conductor/cable/gi wire from the various area preparing their coils and then stacking in the respective jes (store) as per direction of supervising engineer. it includes the work of cartage, cost of labour, t&p carrier etc. required for proper completion of work.acsr weasel conductor scrap,steel & scrap,g.i. wire scrap,11 kv 3x185 sq.mm. xlpe cable scrap

CTN :38521123

21 Dec, 2024 5.00 Lacs

Mathura - Uttar Pradesh

Tender For corrigendum : supply of various material for anurakshan mah october-november 2024 under edc-i, mathura - aluminium binding wire (5 & 6 mm dia), lt clamp with nuts & bolts of pcc pole with neutral, lt shackle insulator, bolts & nuts for shackel, neutral cum earth wire gi wire 7.16 mm or 6 swg, aluminium jointing sleave for aaac conductor weasel/rabbit, aluminium jointing sleave for acsr conductor weasel/rabbit, spacer lt pvc, alluminium lug bolted type, alluminium crimping lug 400 sqmm, alluminium crimping lug 240 sqmm, alluminium crimping lug 150 sqmm, alluminium crimping lug 120 sqmm, al. pg clamps weasel to weasel, al. pg clamps dog to dog, suspension clamp for ab cable (various size), tinned copper fuse wire (various size), silica gel

CTN :38585344

18 Dec, 2024 4.75 Lacs

Bundi - Rajasthan

Tender For work of installing led lights along with pcc pole wire on silor road bundi. (mla fund) - ????? ??? ?????? ?? ?????? ??? ???? ???? ????? ???? ????? ?? ?????? (?????? ???)

State Government

CTN :38573846

23 Dec, 2024 15.00 Lacs

Udaipur - Rajasthan

Tender For rc for supply and fixing of 09 meter pcc poles in various locations of municipal corporation udaipur. (e_10 / light_01)

corporations/Associations/Others

CTN :38574147

03 Jan, 2025 122.79 Crore

Jodhpur - Rajasthan

Tender For 9.0 m long pcc poles of 200 kg working load with factor of safty 2.5

Central Government/Public Sector

CTN :38555427

02 Jan, 2025 2.18 Crore

Delhi - Delhi

Tender For supply of safdarjung airport new delhi for - phase 1 hp open well submersible pump motor , repairing of three phase 3 hp open well submersible pump motor , repairing of three phase 5 hp open well submersible pump motor , repairing of three phase 20 hp open well submersible pump motor , repairing of three phase 7.5 hp sewerage submersible pump motor , detection of lt cable fault by using lt cable fault locator , 9 to 10 watt b22 led lamp , 5 watt b22 led lamp , 10 to 12 watt recess mounted round led , 10 to 12 watt surface mounted round led , 36 watt 2x2 ft led light , 18 to 22 watt led tube , 9 or 10 watt tube light 2feet , 20 watt led lights for bollard , 50 watt led flood light , 70 watt led street light , polycarbonate batten holder , bldc ceiling fan 1200 mm sweep , 400 mm sweep wall fan , 450 mm pedestal fan , 200 mm exhaust fan non metallic body , 300 mm exhaust fan metallic body , exhaust fan 300 mm sweep metallic body heavy duty , desert cooler 70ltrs. , 100 watt mini fan electronic regulator , 5 or 6 a, 1 way piano switch , 5 or 6 a, bell push switch , 15 or 16a, 1 way piano switch , 3 pin, 5 or 6 a, piano socket , 6 pin, 15 or 16 a, piano socket with safety shutter , ding dong door bell , electronic remote bell , 5 or 6 a, 1 way modular switch , 5 or 6 a, modular bell push switch , 15 or 16a, 1 way modular switch , 3 pin, 5 or 6 a, modular socket , 6 pin, 15 or 16 a, modular socket with safety shutter , 16a, extension board , 6a, extension board , 6a, 3pin combined switch socket box , 6 or 16a combined switch socket box with shutter , 3pin, 5 or 6 a, plug top , 3pin, 15 or 16 a, plug top , sp 6 to 32 a c curve mcb , dp 32 a c curve mcb , dp 40 to 63 a c curve mcb , tpn 40 to 63 a c curve mcb , 4p, 63a, 30ka, mccb , 4p, 100a, 30ka, mccb , 4p, 125a, 36ka, mccb , 4p, 160a, 36ka, mccb , 4p, 400a, 50ka, mccb , 4p, 630a, 50ka, mccb , 1.5sqmm, frls, single core copper conductor , 2.5sqmm, frls, single core copper conductor , 4sqmm, frls, single core copper conductor , 3c x 1.5 sqmm copper conductor , 3c x 2.5 sqmm copper conductor , 2c x 0.75 sqmm copper conductor , 2c flexible twin twisted copper wire , 2 c x 10 sqmm. aluminium conductor , 3.5 c x 35 sqmm. aluminium conductor , 3c x 4 sqmm. cu. submersible flat cable , 2.25 mfd capacitor , 2.5 mfd capacitor , 3.15 mfd capacitor , 4 mfd capacitor , 10.0 or 15.0 mfd capacitor , heat convertor 2000w , room heater 800w halogen , hot case 108 ltrs. , centrifugal pump 1hp , single phase submesible pump controller 1.5hp , three phase submesible pump controller 7.5hp , 18watt single submersible pump for desert cooler , 3 phase energy meter , single phase energy meter , 12volts, 25 plate 180 ah lead acid battery , battery terminal , battery water , 20 mm pvc channel , 25 mm pvc channel , 32 mm pvc channel , 1.5 inch gypsum screw , 2.5 inch gypsum screw , 6mm dia, 6x19mm stainless steel wire rope , water proof insulating rubber submersible tape , wood wool pads for desert cooler , works as per dsr 2022 manpower, manpower, over time, servicing of ceiling fans, providing and replacement of bearing of ceiling fans, providing and replacement of bearing of exhaust fans, providing and replacement of wall fans, rewinding of ceiling fan motors, rewinding of desert cooler fan motors, rewinding of exhaust fan motors up to 300 mm, rewinding of exhaust fan motors above 300 mm and up to 450mm , rewinding of wall fan motors, painting of db, out door panel, feeder pillar, painting of post top poles up to 4 mtr, painting of street light pole above 7 to 9 mtr, labour charges for lowering and lifting i/c dismantling of submersible pump set, providing and replacement of bid details/ 2 / 111

corporations/Associations/Others

CTN :38513929

21 Dec, 2024 8.66 Lacs

Prayagraj - Uttar Pradesh

Tender For supply of material and erection for installation of additional 5 mva t/f at 33/11 kv s/s jari distt. prayagraj in business plan 2023-24 on semi turnkey basis under edc-i, prayagraj - supply, carriage & erection of materials for installation of add. 5 mva t/f at 33/11 kv s/s jari distt. prayagraj, a- supply of de-centralised materials, control cable 4x2.5 mm2, control cable 2x2.5 mm2, 11 kv cable jointing kit 120 mm.sq., 11 kv cable jointing kit 185 mm.sq., rabber matting, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp for pcc pole, dropper channel clamp for pcc pole, g.i. strips of size 35x6 mm, g.i. strips of size 50x6 mm, g.i. pipe 2" dia, b- carriage of following material, pcc pole 8.5 mtr. long-2 no., structure of la, isolator, 33 kv cts, single t/f control pannel, 1 no.11 kv outgoing and 1 no. incoming pannel, battery & battery charger and 33 kv vcb etc., c- erection work, construction of complete t/f plinth size 3mx3m x1.05 mtr. (0.3 mtr. above the ground level and 0.75 mtr. deep foundation made as per drawing.) top of plinth is to be c.c. work in the ratio of 1:3:6 fitted with 3 mtr. long, 90 lbs, 2nos. rail pieces. cement mortar is to be used in 1:3 ratio. cement, concrete material, bricks used in plinth shall be supplied by the contractor. 6 stone grit is to be laid before foundation start for whole plinth. except rail pieces all material shall be provided by the contractor ., erection of complete structure and 33 kv bus isolator in switch yard as per respo drawing. work also includes construction of plinth of size 0.45x0.45x1.0 cum with cement,coarse sand and ballast in ratio 1:3:6 and plastaring of plinth with cement & sand in ratio 1:4 including digging of pits & backfilling. all concreting material like cement, ballast, sand labour & t&p etc.shall be provided by the contractor., erection of complete structure and 33 kv lightening arrestor in switch yard as per respo drawing. work includes erection of 3 nos.33 kv lightening arrestor, its fitting and mounting with care. grouting of structure with cement, coarse sand and ballast in ratio 1:3:6, construction of plinth size 0.45x 0.45x0.90 cum. plastering the plinth with cement mortar with cement and sand in ratio 1:4. all concreting material like cement, ballast, sand labour & t&p etc.shall be provided by the contractor., erection of 33 kv post insulators with complete structure in switch yard as per respo drawing. work includes installation of 1x3 nos. 33 kv post insulator on structure complete as per schedule, grouting of structure with ist class brick ballast in the ratio of 1:3:6, plastering in the ratio of 1:3 on plinth size 0.45x0.45x0.90 cum. the work is to be done strictly as per respo drawing. all the material like post insulator cap, cement, concrete material used for above work will be provided by the contractor., erection of complete 33 kv vcb with structure 0.7x0.7x1.0 cum. (0.3 mtr. above the ground level and 0.75 mtr. deep foundation or made as per requirement.) in switchyard and grouting of vcb structure by cement, sand, brick ballast mortar in ratio 1:3:4. work includes complete fitting of vcb on structure carefully with making all connections of control cable for operating the vcb . all other item like cement, concrete material, t&p shall be provided by the contractor., erection of complete 33 kv c.t (03 no) with structure (0.45x0.45x0.90) cum. in switchyard and grouting of c.t. structure by cement, sand, brick ballast mortar in ratio 1:3:4. work includes complete fitting of c.t. on structure carefully with making all connections of control cable . all other item like cement, concrete material, t&p shall be provided by the contractor., installation of 11 kv single transformer control pannel, 1 no. incoming and 1 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with com

corporations/Associations/Others

CTN :38513944

21 Dec, 2024 8.66 Lacs

Prayagraj - Uttar Pradesh

Tender For supply of material and erection for installation of additional 5 mva t/f at 33/11 kv s/s karchana distt. prayagraj in business plan 2023-24 on semi turnkey basis under edc-i, prayagraj - supply, carriage & erection of materials for installation of add. 5 mva t/f at 33/11 kv s/s karchana distt. prayagraj, a- supply of de-centralised materials, control cable 4x2.5 mm2, control cable 2x2.5 mm2, 11 kv cable jointing kit 120 mm.sq., 11 kv cable jointing kit 185 mm.sq., rabber matting, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp for pcc pole, dropper channel clamp for pcc pole, g.i. strips of size 35x6 mm, g.i. strips of size 50x6 mm, g.i. pipe 2" dia, b- carriage of following material, pcc pole 8.5 mtr. long-2 no., structure of la, isolator, 33 kv cts, single t/f control pannel, 1 no.11 kv outgoing and 1 no. incoming pannel, battery & battery charger and 33 kv vcb etc., c- erection work, construction of complete t/f plinth size 3mx3m x1.05 mtr. (0.3 mtr. above the ground level and 0.75 mtr. deep foundation made as per drawing.) top of plinth is to be c.c. work in the ratio of 1:3:6 fitted with 3 mtr. long, 90 lbs, 2nos. rail pieces. cement mortar is to be used in 1:3 ratio. cement, concrete material, bricks used in plinth shall be supplied by the contractor. 6 stone grit is to be laid before foundation start for whole plinth. except rail pieces all material shall be provided by the contractor ., erection of complete structure and 33 kv bus isolator in switch yard as per respo drawing. work also includes construction of plinth of size 0.45x0.45x1.0 cum with cement,coarse sand and ballast in ratio 1:3:6 and plastaring of plinth with cement & sand in ratio 1:4 including digging of pits & backfilling. all concreting material like cement, ballast, sand labour & t&p etc.shall be provided by the contractor., erection of complete structure and 33 kv lightening arrestor in switch yard as per respo drawing. work includes erection of 3 nos.33 kv lightening arrestor, its fitting and mounting with care. grouting of structure with cement, coarse sand and ballast in ratio 1:3:6, construction of plinth size 0.45x 0.45x0.90 cum. plastering the plinth with cement mortar with cement and sand in ratio 1:4. all concreting material like cement, ballast, sand labour & t&p etc.shall be provided by the contractor., erection of 33 kv post insulators with complete structure in switch yard as per respo drawing. work includes installation of 1x3 nos. 33 kv post insulator on structure complete as per schedule, grouting of structure with ist class brick ballast in the ratio of 1:3:6, plastering in the ratio of 1:3 on plinth size 0.45x0.45x0.90 cum. the work is to be done strictly as per respo drawing. all the material like post insulator cap, cement, concrete material used for above work will be provided by the contractor., erection of complete 33 kv vcb with structure 0.7x0.7x1.0 cum. (0.3 mtr. above the ground level and 0.75 mtr. deep foundation or made as per requirement.) in switchyard and grouting of vcb structure by cement, sand, brick ballast mortar in ratio 1:3:4. work includes complete fitting of vcb on structure carefully with making all connections of control cable for operating the vcb . all other item like cement, concrete material, t&p shall be provided by the contractor., erection of complete 33 kv c.t (03 no) with structure (0.45x0.45x0.90) cum. in switchyard and grouting of c.t. structure by cement, sand, brick ballast mortar in ratio 1:3:4. work includes complete fitting of c.t. on structure carefully with making all connections of control cable . all other item like cement, concrete material, t&p shall be provided by the contractor., installation of 11 kv single transformer control pannel, 1 no. incoming and 1 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect

Pc Pole Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others